Transducing is a more advanced technique than we've covered in this book. It extends many of the concepts from Chapter 9 on list operations.
I wouldn't necessarily call this topic strictly "Functional-Light", but more like a bonus on top. I've presented this as an appendix because you might very well need to skip the discussion for now and come back to it once you feel fairly comfortable with -- and make sure you've practiced! -- the main book concepts.
To be honest, even after teaching transducing many times, and writing this chapter, I am still trying to fully wrap my brain around this technique. So don't feel bad if it twists you up. Bookmark this appendix and come back when you're ready.
Transducing means transforming with reduction.
I know that may sound like a jumble of words that confuses more than it clarifies. But let's take a look at how powerful it can be. I actually think it's one of the best illustrations of what you can do once you grasp the principles of Functional-Light Programming.
As with the rest of this book, my approach is to first explain why, then how, then finally boil it down to a simplified, repeatable what. That's often the reverse of how many teach, but I think you'll learn the topic more deeply this way.
Let's start by extending a scenario we covered back in Chapter 3, testing words to see if they're short enough and/or long enough:
function isLongEnough(str) {
return str.length >= 5;
}
function isShortEnough(str) {
return str.length <= 10;
}In Chapter 3, we used these predicate functions to test a single word. Then in Chapter 9, we learned how to repeat such tests using list operations like filter(..). For example:
var words = [ "You", "have", "written", "something", "very",
"interesting" ];
words
.filter( isLongEnough )
.filter( isShortEnough );
// ["written","something"]It may not be obvious, but this pattern of separate adjacent list operations has some non-ideal characteristics. When we're dealing with only a single array of a small number of values, everything is fine. But if there were lots of values in the array, each filter(..) processing the list separately can slow down a bit more than we'd like.
A similar performance problem arises when our arrays are async/lazy (aka Observables), processing values over time in response to events (see Chapter 10). In this scenario, only a single value comes down the event stream at a time, so processing that discrete value with two separate filter(..)s function calls isn't really such a big deal.
But what's not obvious is that each filter(..) method produces a separate observable. The overhead of pumping a value out of one observable into another can really add up. That's especially true since in these cases, it's not uncommon for thousands or millions of values to be processed; even such small overhead costs add up quickly.
The other downside is readability, especially when we need to repeat the same series of operations against multiple lists (or Observables). For example:
zip(
list1.filter( isLongEnough ).filter( isShortEnough ),
list2.filter( isLongEnough ).filter( isShortEnough ),
list3.filter( isLongEnough ).filter( isShortEnough )
)Repetitive, right?
Wouldn't it be better (both for readability and performance) if we could combine the isLongEnough(..) predicate with the isShortEnough(..) predicate? You could do so manually:
function isCorrectLength(str) {
return isLongEnough( str ) && isShortEnough( str );
}But that's not the FP way!
In Chapter 9, we talked about fusion -- composing adjacent mapping functions. Recall:
words
.map(
pipe( removeInvalidChars, upper, elide )
);Unfortunately, combining adjacent predicate functions doesn't work as easily as combining adjacent mapping functions. To understand why, think about the "shape" of the predicate function -- a sort of academic way of describing the signature of inputs and output. It takes a single value in, and it returns a true or a false.
If you tried isShortEnough(isLongEnough(str)), it wouldn't work properly. isLongEnough(..) will return true/false, not the string value that isShortEnough(..) is expecting. Bummer.
A similar frustration exists trying to compose two adjacent reducer functions. The "shape" of a reducer is a function that receives two values as input, and returns a single combined value. The output of a reducer as a single value is not suitable for input to another reducer expecting two inputs.
Moreover, the reduce(..) helper takes an optional initialValue input. Sometimes this can be omitted, but sometimes it has to be passed in. That even further complicates composition, since one reduction might need one initialValue and the other reduction might seem like it needs a different initialValue. How can we possibly do that if we only make one reduce(..) call with some sort of composed reducer?
Consider a chain like this:
words
.map( strUppercase )
.filter( isLongEnough )
.filter( isShortEnough )
.reduce( strConcat, "" );
// "WRITTENSOMETHING"Can you envision a composition that includes all of these steps: map(strUppercase), filter(isLongEnough), filter(isShortEnough), reduce(strConcat)? The shape of each operator is different, so they won't directly compose together. We need to bend their shapes a little bit to fit them together.
Hopefully these observations have illustrated why simple fusion-style composition isn't up to the task. We need a more powerful technique, and transducing is that tool.
Let's talk about how we might derive a composition of mappers, predicates, and/or reducers.
Don't get too overwhelmed: you won't have to go through all these mental steps we're about to explore in your own programming. Once you understand and can recognize the problem transducing solves, you'll be able to just jump straight to using a transduce(..) utility from a FP library and move on with the rest of your application!
Let's jump in.
The first trick we need to perform is expressing our filter(..) and map(..) calls as reduce(..) calls. Recall how we did that in Chapter 9:
function strUppercase(str) { return str.toUpperCase(); }
function strConcat(str1,str2) { return str1 + str2; }
function strUppercaseReducer(list,str) {
list.push( strUppercase( str ) );
return list;
}
function isLongEnoughReducer(list,str) {
if (isLongEnough( str )) list.push( str );
return list;
}
function isShortEnoughReducer(list,str) {
if (isShortEnough( str )) list.push( str );
return list;
}
words
.reduce( strUppercaseReducer, [] )
.reduce( isLongEnoughReducer, [] )
.reduce( isShortEnoughReducer, [] )
.reduce( strConcat, "" );
// "WRITTENSOMETHING"That's a decent improvement. We now have four adjacent reduce(..) calls instead of a mixture of three different methods all with different shapes. We still can't just compose(..) those four reducers, however, because they accept two arguments instead of one.
In Chapter 9, we sort of cheated and used list.push(..) to mutate as a side effect rather than creating a whole new array to concatenate onto. Let's step back and be a bit more formal for now:
function strUppercaseReducer(list,str) {
return [ ...list, strUppercase( str ) ];
}
function isLongEnoughReducer(list,str) {
if (isLongEnough( str )) return [ ...list, str ];
return list;
}
function isShortEnoughReducer(list,str) {
if (isShortEnough( str )) return [ ...list, str ];
return list;
}Later, we'll revisit whether creating a new array (e.g., [...list,str]) to concatenate onto is necessary here or not.
Both filter reducers are almost identical, except they use a different predicate function. Let's parameterize that so we get one utility that can define any filter-reducer:
function filterReducer(predicateFn) {
return function reducer(list,val){
if (predicateFn( val )) return [ ...list, val ];
return list;
};
}
var isLongEnoughReducer = filterReducer( isLongEnough );
var isShortEnoughReducer = filterReducer( isShortEnough );Let's do the same parameterization of the mapperFn(..) for a utility to produce any map-reducer:
function mapReducer(mapperFn) {
return function reducer(list,val){
return [ ...list, mapperFn( val ) ];
};
}
var strUppercaseReducer = mapReducer( strUppercase );Our chain still looks the same:
words
.reduce( strUppercaseReducer, [] )
.reduce( isLongEnoughReducer, [] )
.reduce( isShortEnoughReducer, [] )
.reduce( strConcat, "" );Look very closely at the preceding mapReducer(..) and filterReducer(..) functions. Do you spot the common functionality shared in each?
This part:
return [ ...list, .. ];
// or
return list;Let's define a helper for that common logic. But what shall we call it?
function WHATSITCALLED(list,val) {
return [ ...list, val ];
}If you examine what that WHATSITCALLED(..) function does, it takes two values (an array and another value) and it "combines" them by creating a new array and concatenating the value onto the end of it. Very uncreatively, we could name this listCombine(..):
function listCombine(list,val) {
return [ ...list, val ];
}Let's now re-define our reducer helpers to use listCombine(..):
function mapReducer(mapperFn) {
return function reducer(list,val){
return listCombine( list, mapperFn( val ) );
};
}
function filterReducer(predicateFn) {
return function reducer(list,val){
if (predicateFn( val )) return listCombine( list, val );
return list;
};
}Our chain still looks the same (so we won't repeat it).
Our simple listCombine(..) utility is only one possible way that we might combine two values. Let's parameterize the use of it to make our reducers more generalized:
function mapReducer(mapperFn,combinerFn) {
return function reducer(list,val){
return combinerFn( list, mapperFn( val ) );
};
}
function filterReducer(predicateFn,combinerFn) {
return function reducer(list,val){
if (predicateFn( val )) return combinerFn( list, val );
return list;
};
}To use this form of our helpers:
var strUppercaseReducer = mapReducer( strUppercase, listCombine );
var isLongEnoughReducer = filterReducer( isLongEnough, listCombine );
var isShortEnoughReducer = filterReducer( isShortEnough, listCombine );Defining these utilities to take two arguments instead of one is less convenient for composition, so let's use our curry(..) approach:
var curriedMapReducer =
curry( function mapReducer(mapperFn,combinerFn){
return function reducer(list,val){
return combinerFn( list, mapperFn( val ) );
};
} );
var curriedFilterReducer =
curry( function filterReducer(predicateFn,combinerFn){
return function reducer(list,val){
if (predicateFn( val )) return combinerFn( list, val );
return list;
};
} );
var strUppercaseReducer =
curriedMapReducer( strUppercase )( listCombine );
var isLongEnoughReducer =
curriedFilterReducer( isLongEnough )( listCombine );
var isShortEnoughReducer =
curriedFilterReducer( isShortEnough )( listCombine );That looks a bit more verbose, and probably doesn't seem very useful.
But this is actually necessary to get to the next step of our derivation. Remember, our ultimate goal here is to be able to compose(..) these reducers. We're almost there.
This step is the trickiest of all to visualize. So read slowly and pay close attention here.
Let's consider the curried functions from earlier, but without the listCombine(..) function having been passed in to each:
var x = curriedMapReducer( strUppercase );
var y = curriedFilterReducer( isLongEnough );
var z = curriedFilterReducer( isShortEnough );Think about the shape of all three of these intermediate functions, x(..), y(..), and z(..). Each one expects a single combination function, and produces a reducer function with it.
Remember, if we wanted the independent reducers from all these, we could do:
var upperReducer = x( listCombine );
var longEnoughReducer = y( listCombine );
var shortEnoughReducer = z( listCombine );But what would you get back if you called y(z), instead of y(listCombine)? Basically, what happens when passing z in as the combinerFn(..) for the y(..) call? That returned reducer function internally looks kinda like this:
function reducer(list,val) {
if (isLongEnough( val )) return z( list, val );
return list;
}See the z(..) call inside? That should look wrong to you, because the z(..) function is supposed to receive only a single argument (a combinerFn(..)), not two arguments (list and val). The shapes don't match. That won't work.
Let's instead look at the composition y(z(listCombine)). We'll break that down into two separate steps:
var shortEnoughReducer = z( listCombine );
var longAndShortEnoughReducer = y( shortEnoughReducer );We create shortEnoughReducer(..), then we pass it in as the combinerFn(..) to y(..) instead of calling y(listCombine); this new call produces longAndShortEnoughReducer(..). Re-read that a few times until it clicks.
Now consider: what do shortEnoughReducer(..) and longAndShortEnoughReducer(..) look like internally? Can you see them in your mind?
// shortEnoughReducer, from calling z(..):
function reducer(list,val) {
if (isShortEnough( val )) return listCombine( list, val );
return list;
}
// longAndShortEnoughReducer, from calling y(..):
function reducer(list,val) {
if (isLongEnough( val )) return shortEnoughReducer( list, val );
return list;
}Do you see how shortEnoughReducer(..) has taken the place of listCombine(..) inside longAndShortEnoughReducer(..)? Why does that work?
Because the shape of a reducer(..) and the shape of listCombine(..) are the same. In other words, a reducer can be used as a combination function for another reducer; that's how they compose! The listCombine(..) function makes the first reducer, then that reducer can be used as the combination function to make the next reducer, and so on.
Let's test out our longAndShortEnoughReducer(..) with a few different values:
longAndShortEnoughReducer( [], "nope" );
// []
longAndShortEnoughReducer( [], "hello" );
// ["hello"]
longAndShortEnoughReducer( [], "hello world" );
// []The longAndShortEnoughReducer(..) utility is filtering out both values that are not long enough and values that are not short enough, and it's doing both these filterings in the same step. It's a composed reducer!
Take another moment to let that sink in. It still kinda blows my mind.
Now, to bring x(..) (the uppercase reducer producer) into the composition:
var longAndShortEnoughReducer = y( z( listCombine) );
var upperLongAndShortEnoughReducer = x( longAndShortEnoughReducer );As the name upperLongAndShortEnoughReducer(..) implies, it does all three steps at once -- a mapping and two filters! What it kinda look likes internally:
// upperLongAndShortEnoughReducer:
function reducer(list,val) {
return longAndShortEnoughReducer( list, strUppercase( val ) );
}A string val is passed in, uppercased by strUppercase(..) and then passed along to longAndShortEnoughReducer(..). That function only conditionally adds this uppercased string to the list if it's both long enough and short enough. Otherwise, list will remain unchanged.
It took my brain weeks to fully understand the implications of that juggling. So don't worry if you need to stop here and re-read a few (dozen!) times to get it. Take your time.
Now let's verify:
upperLongAndShortEnoughReducer( [], "nope" );
// []
upperLongAndShortEnoughReducer( [], "hello" );
// ["HELLO"]
upperLongAndShortEnoughReducer( [], "hello world" );
// []This reducer is the composition of the map and both filters! That's amazing!
Let's recap where we're at so far:
var x = curriedMapReducer( strUppercase );
var y = curriedFilterReducer( isLongEnough );
var z = curriedFilterReducer( isShortEnough );
var upperLongAndShortEnoughReducer = x( y( z( listCombine ) ) );
words.reduce( upperLongAndShortEnoughReducer, [] );
// ["WRITTEN","SOMETHING"]That's pretty cool. But let's make it even better.
x(y(z( .. ))) is a composition. Let's skip the intermediate x / y / z variable names, and just express that composition directly:
var composition = compose(
curriedMapReducer( strUppercase ),
curriedFilterReducer( isLongEnough ),
curriedFilterReducer( isShortEnough )
);
var upperLongAndShortEnoughReducer = composition( listCombine );
words.reduce( upperLongAndShortEnoughReducer, [] );
// ["WRITTEN","SOMETHING"]Think about the flow of "data" in that composed function:
listCombine(..)flows in as the combination function to make the filter-reducer forisShortEnough(..).- That resulting reducer function then flows in as the combination function to make the filter-reducer for
isLongEnough(..). - Finally, that resulting reducer function flows in as the combination function to make the map-reducer for
strUppercase(..).
In the previous snippet, composition(..) is a composed function expecting a combination function to make a reducer; composition(..) here has a special name: transducer. Providing the combination function to a transducer produces the composed reducer:
var transducer = compose(
curriedMapReducer( strUppercase ),
curriedFilterReducer( isLongEnough ),
curriedFilterReducer( isShortEnough )
);
words
.reduce( transducer( listCombine ), [] );
// ["WRITTEN","SOMETHING"]Note: We should make an observation about the compose(..) order in the previous two snippets, which may be confusing. Recall that in our original example chain, we map(strUppercase) and then filter(isLongEnough) and finally filter(isShortEnough); those operations indeed happen in that order. But in Chapter 4, we learned that compose(..) typically has the effect of running its functions in reverse order of listing. So why don't we need to reverse the order here to get the same desired outcome? The abstraction of the combinerFn(..) from each reducer reverses the effective applied order of operations under the hood. So counter-intuitively, when composing a transducer, you actually want to list them in desired order of execution!
As a quick aside, let's revisit our listCombine(..) combination function implementation:
function listCombine(list,val) {
return [ ...list, val ];
}While this approach is pure, it has negative consequences for performance: for each step in the reduction, we're creating a whole new array to append the value onto, effectively throwing away the previous array. That's a lot of arrays being created and thrown away, which is not only bad for CPU but also GC memory churn.
By contrast, look again at the better-performing but impure version:
function listCombine(list,val) {
list.push( val );
return list;
}Thinking about listCombine(..) in isolation, there's no question it's impure and that's usually something we'd want to avoid. However, there's a bigger context we should consider.
listCombine(..) is not a function we interact with at all. We don't directly use it anywhere in the program; instead, we let the transducing process use it.
Back in Chapter 5, we asserted that our goal with reducing side effects and defining pure functions was only that we expose pure functions to the API level of functions we'll use throughout our program. We observed that under the covers, inside a pure function, it can cheat for performance sake all it wants, as long as it doesn't violate the external contract of purity.
listCombine(..) is more an internal implementation detail of the transducing -- in fact, it'll often be provided by the transducing library for you! -- rather than a top-level method you'd interact with on a normal basis throughout your program.
Bottom line: I think it's perfectly acceptable, and advisable even, to use the performance-optimal impure version of listCombine(..). Just make sure you document that it's impure with a code comment!
So far, this is what we've derived with transducing:
words
.reduce( transducer( listCombine ), [] )
.reduce( strConcat, "" );
// WRITTENSOMETHINGThat's pretty good, but we have one final trick up our sleeve with transducing. And frankly, I think this part is what makes all this mental effort you've expended thus far, actually worth it.
Can we somehow "compose" these two reduce(..) calls to get it down to just one reduce(..)? Unfortunately, we can't just add strConcat(..) into the compose(..) call; because it's a reducer and not a combination-expecting function, its shape is not correct for the composition.
But let's look at these two functions side by side:
function strConcat(str1,str2) { return str1 + str2; }
function listCombine(list,val) { list.push( val ); return list; }If you squint your eyes, you can almost see how these two functions are interchangeable. They operate with different data types, but conceptually they do the same thing: combine two values into one.
In other words, strConcat(..) is a combination function!
That means we can use it instead of listCombine(..) if our end goal is to get a string concatenation rather than a list:
words.reduce( transducer( strConcat ), "" );
// WRITTENSOMETHINGBoom! That's transducing for you. I won't actually drop the mic here, but just gently set it down...
Take a deep breath. That was a lot to digest.
Clearing our brains for a minute, let's turn our attention back to just using transducing in our applications without jumping through all those mental hoops to derive how it works.
Recall the helpers we defined earlier; let's rename them for clarity:
var transduceMap =
curry( function mapReducer(mapperFn,combinerFn){
return function reducer(list,v){
return combinerFn( list, mapperFn( v ) );
};
} );
var transduceFilter =
curry( function filterReducer(predicateFn,combinerFn){
return function reducer(list,v){
if (predicateFn( v )) return combinerFn( list, v );
return list;
};
} );Also recall that we use them like this:
var transducer = compose(
transduceMap( strUppercase ),
transduceFilter( isLongEnough ),
transduceFilter( isShortEnough )
);transducer(..) still needs a combination function (like listCombine(..) or strConcat(..)) passed to it to produce a transduce-reducer function, which can then be used (along with an initial value) in reduce(..).
But to express all these transducing steps more declaratively, let's make a transduce(..) utility that does these steps for us:
function transduce(transducer,combinerFn,initialValue,list) {
var reducer = transducer( combinerFn );
return list.reduce( reducer, initialValue );
}Here's our running example, cleaned up:
var transducer = compose(
transduceMap( strUppercase ),
transduceFilter( isLongEnough ),
transduceFilter( isShortEnough )
);
transduce( transducer, listCombine, [], words );
// ["WRITTEN","SOMETHING"]
transduce( transducer, strConcat, "", words );
// WRITTENSOMETHINGNot bad, huh!? See the listCombine(..) and strConcat(..) functions used interchangeably as combination functions?
Finally, let's illustrate our running example using the transducers-js library:
var transformer = transducers.comp(
transducers.map( strUppercase ),
transducers.filter( isLongEnough ),
transducers.filter( isShortEnough )
);
transducers.transduce( transformer, listCombine, [], words );
// ["WRITTEN","SOMETHING"]
transducers.transduce( transformer, strConcat, "", words );
// WRITTENSOMETHINGLooks almost identical to above.
Note: The preceding snippet uses transformers.comp(..) because the library provides it, but in this case our compose(..) from Chapter 4 would produce the same outcome. In other words, composition itself isn't a transducing-sensitive operation.
The composed function in this snippet is named transformer instead of transducer. That's because if we call transformer( listCombine ) (or transformer( strConcat )), we won't get a straight-up transduce-reducer function as earlier.
transducers.map(..) and transducers.filter(..) are special helpers that adapt regular predicate or mapper functions into functions that produce a special transform object (with the transducer function wrapped underneath); the library uses these transform objects for transducing. The extra capabilities of this transform object abstraction are beyond what we'll explore, so consult the library's documentation for more information.
Because calling transformer(..) produces a transform object and not a typical binary transduce-reducer function, the library also provides toFn(..) to adapt the transform object to be useable by native array reduce(..):
words.reduce(
transducers.toFn( transformer, strConcat ),
""
);
// WRITTENSOMETHINGinto(..) is another provided helper that automatically selects a default combination function based on the type of empty/initial value specified:
transducers.into( [], transformer, words );
// ["WRITTEN","SOMETHING"]
transducers.into( "", transformer, words );
// WRITTENSOMETHINGWhen specifying an empty [] array, the transduce(..) called under the covers uses a default implementation of a function like our listCombine(..) helper. But when specifying an empty "" string, something like our strConcat(..) is used. Cool!
As you can see, the transducers-js library makes transducing pretty straightforward. We can very effectively leverage the power of this technique without getting into the weeds of defining all those intermediate transducer-producing utilities ourselves.
To transduce means to transform with a reduce. More specifically, a transducer is a composable reducer.
We use transducing to compose adjacent map(..), filter(..), and reduce(..) operations together. We accomplish this by first expressing map(..)s and filter(..)s as reduce(..)s, and then abstracting out the common combination operation to create unary reducer-producing functions that are easily composed.
Transducing primarily improves performance, which is especially obvious if used on an observable.
But more broadly, transducing is how we express a more declarative composition of functions that would otherwise not be directly composable. The result, if used appropriately as with all other techniques in this book, is clearer, more readable code! A single reduce(..) call with a transducer is easier to reason about than tracing through multiple reduce(..) calls.