21.2.0 (Bitwig 5.0+)

• All devices
  • Fixed: Button combinations on session grid did always execute clip play.
• Launchkey Mk3
  • Fixed: Parameter Pages 9-16 could not be accessed.
• Push 3
  • New: Added configuration page for audio interface

21.1.0 (Bitwig 5.0+)

• Generic Flexi
  • New: Clip selection follows now track selection.
• Launchpad
  • Fixed: In session mode playing pads were not green and recording pads not red.
  • Fixed: Pro Mk3: Selected Play/Sequence modes were not restored correctly when switching back from Session.
• Maschine
  • Fixed: Do not show play mode notifications on devices with a display.
• Push
  • New: Added all available u-he CLAP versions to favorites as well as Vital (CLAP version), Captain (VST3) plugins and Korg modwave (VST3 version).
  • New: Push 1/2: Select+Add Device: Opens the favorites menu on the device page.
  • Fixed: Project/Track page selection did not work.
  • Fixed: Push 3: Only activate MPE on Play, Piano, Drum 64 and Drum modes. Also fixed non working button combinations when MPE was active.
  • Fixed: MPE settings in configuration were not documented in the manual.

21.0.0 (Bitwig 5.0+)

• All devices
  • Fixed: Improved feedback of automation modes.
• Beatstep
  • New: Clip launcher grid indication is now always enabled (previously only when Session mode was active).
• Generic Flexi
  • Fixed: Switching project/track remote pages was triggered twice.
• HUI
  • New: RecRdyAll toggles rec arm state on all tracks of the active bank page.
  • New: Option+Jog Wheel - Change tempo (press Shift for fine adjustment).
  • New: Control+Jog Wheel - Change loop start (press Shift for fine adjustment).
  • New: Alt+Jog Wheel - Change loop length (press Shift for fine adjustment).
  • Fixed: Clip related function did not work when assigned to F1-F8 buttons.
• Kontrol MkII
  • Fixed: Clip launcher grid indication was not enabled.
• MCU
  • New: Shift+RecArm toggles rec arm state on all tracks of the active bank page.
• OSC
  • Fixed: /track/param did trigger project parameters.
• Push
  • New: Added support for Ableton Push 3.
  • New: Push 1: Pressing the Stop Clip button allows now to stop clips with the 8 2nd row buttons (similar to solo/mute). Combine 2nd row button with Shift for alternate stop action. Stopping all clips is now Select+Stop clip.
  • New: Push 2: Stop Clip can now be locked with Shift+Stop Clip (similar to solo/mute).
  • New: Push 2: Removed unecessary Rec Arm, Solo and Mute from Cue channel.
  • New: Metronome volume has been moved into the metronome settings mode (long press metronome button).
  • New: Improved session configuration mode. Easier selection of what to show on the display.
  • New: 'Add Track' mode has now 7 favorites for each track type as well as 7 device favorites.
  • New: Removed 1st column in browser for the time being until API gets adapted to Bitwig 5 browser.
  • Fixed: Push 1: Master volume graphical representation was not missing line if VU mode was active.
  • Fixed: Do not notify tempo value when tempo knob is used in browser mode to scroll results.

20.3.2 (Bitwig 5.0+)

• All devices
  • Fixed: Workaround for an incompatibility with Bitwig 5.0.2.
• Generic Flexi
  • Fixed: Crash on startup when keyboard MIDI channel was set to Off.

20.3.1 (Bitwig 5.0+)

• All devices
  • New: Toggling solo on a track now respects the 'solo exclusive' setting in the Bitwig settings.
  • Fixed: There might have been a potential crash.
• Gamepad
  • New: Added different options for the range of MIDI CC values sent for each axis.
• Generic Flexi
  • New: Added functions for 1st instrument device.
  • New: The name of the keyboard input can now be configured.
  • New: Added more functions to navigate project/track remote pages.
  • Fixed: Track Remote functions did also show up in Track functions but did not work.
• OSC
  • Fixed: The Open Stage Control template did still send /user commands for touch events.
• Push
  • Fixed: Removed unecessary pad mode notifications on track selection.

20.3.0 (Bitwig 5.0+)

• Requires Bitwig 5.0+
• All devices
  • New: Sends can now be changed for send channels as well.
• APC40 mkII
  • New: Press USER to select the user mode to control project and track parameters. Press again to toggle between the project and track parameters.
• APCmini
  • Fixed: Send channels could not selected.
• Fire
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters.
• Generic Flexi
  • New: User parameter commands are replaced with commands for project and track parameters (Project Remotes / Track Remotes).
  • New: The FX Track section has now also Send commands.
• Launchkey Mini
  • New: The User mode was replaced with the Project Parameters mode to change project parameters.
• Launchkey Mk3
  • Fixed: Toggling groups open/closed always got triggered twice.
• Launchpad
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Up/down button switches between them. Left/right switches pages.
• Maschine
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Cursor left/right switches between them. Encoder up/down buttons switches pages.
• Maschine JAM
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. SELECT+CONTROL switches between them.
• MCU
  • New: The User mode was replaced with the Project/Track Parameters mode to change project or track parameters. Fader bank left/right switches between them. Channel left/right switches pages.
• OSC
  • New: There is now a setting to choose between flat and hierarchical track navigation.
  • New: Increased the number of configurable actions to 20.
  • New: /automationWriteMode also dis-/enables clip automation record.
  • New: /user commands are replaced with according /project and /track commands. OpenStageControl template got updated to reflect this (but only with /project commands).
  • Fixed: Send attributes could not be changed (except volume).
  • Fixed: Device page name was missing the 'name' part.
• Push
  • New: The user mode gives now access to the project and track parameters. First 2 buttons of the 2nd row toggle between Project and (selected) Track parameters.
  • Fixed: Only the first 8 scenes could be launched in Scenes view.
• SLMkIII
  • New: The user mode has been replaced with a Project FX and Track FX mode. Keep the UP button pressed and select the modes with the 7th/8th row button. These modes give access to the project and track parameters.
• Turn
  • Fixed: Only the first 8 scenes could be launched in Scenes view.

20.2.1 (Bitwig 5.0+)

• Fire
  • New: Names of drum pads are now displayed when switching selection in drum mode.
• Generic Flexi
  • Fixed: MIDI feedback from on/off values did sent 1/0 instead of 127/0.
• Launchkey Mk3
  • Fixed: Wrong mode was set after closing the browser.
• MCU
  • Fixed: Fader flip did not work in Instrument mode.

20.2.0 (Bitwig 5.0+)

• Added support for the ESI Xjam controller
• Komplete Kontrol MkII
  • New: Make sure that the same slot is selected when switching tracks.
• MCU
  • Fixed: Added missing EQ and INST buttons to simulator.

20.1.0 (Bitwig 5.0+)

• Launch Control XL
  • Fixed: Moving drum pad range was broken.
• Launchpad, Push
  • Fixed: Clip Length mode was not always recalled.
• MCU
  • New: Layer mode uses now the first instrument instead of the selected device.
  • Fixed: Device froze when there were no sends and send 2 was selected.
• OSC
  • Fixed: Moving drum pad range was broken.
• SLMkIII
  • Fixed: Set knob layout only when necessary.

20.0.0 (Bitwig 5.0+)

• Beatstep, Electra One, Gamepad, Generic Flexi
  • New: The new Bitwig 5 clip and scene release functions can be used.
• APC40
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Shift+Stop All Clips button triggers the alternative stop function.
  • New: MkI: Press Shift+Device On/Off button to open/close the browser (was Shift+Stop All Clips).
  • Fixed: MkI: Selecting channel A or B for crossfader did not work.
• APCmini
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Existing scenes have now the color green. The selected scene blinks green.
• Fire
  • New: Toggling the Birds Eye view in session mode (SHIFT+PERFORM) directly closes the Shift mode and displays an info in the display which mode is selected.
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative function is triggered in combination with the SHIFT button. To only select a clip or scene press ALT and the pad of the clip.
• Generic Flexi:
  • New: Added new functions Clip: Play Alternative and Scene N: Launch Scene Alternative.
  • New: Added new functions Clip: Stop Alternative, Clip: Stop All and Clip: Stop All Alternative.
• Launch Control XL
  • New: The new Bitwig 5 scene release function can be used.
• Launchkey / Launchkey Mini / SLMk3
  • New: The new Bitwig 5 clip and scene release functions can be used.
  • New: Mini: The executed functions when Stop/Solo/Mute is pressed are displayed.
• Launchpad
  • New: The new Bitwig 5 clip and scene release functions can be used. The alternative functions are triggered in combination with the SHIFT button. The previous long press function to select a clip had to be removed to make this work.
  • New: The Shift mode has a new button to execute the alternative 'stop all clips' function (left to the normal 'stop all clips' pad).
  • New: If the 'stop clip' row is active in session mode, the pads can be used in combination with the Shift button to trigger the alternative Stop function.
  • New: Pro Mk3: Combine Shift with the track buttons in Stop Clip mode to trigger the alternative Stop function.
• Maschine
  • New: Pattern + Scene modes: The new Bitwig 5 clip and scene release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button. To select a clip/scene use the SELECT button.
  • New: Pattern mode: Shift+PATTERN button triggers the alternative clip stop function.
  • New: Scene mode: Shift+SCENE button triggers the alternative clip stop function.
• Maschine JAM
  • New: Pattern + Scene modes: The new Bitwig 5 clip release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button. To select a clip/scene use the SELECT button.
  • New: Select + MUTE + clip pad triggers the alternative clip stop function.
• MCU
  • New: SAVE button LED is off when project is not modified.
  • New: OPTION + press a knob which controls a send level toggles the send on/off.
• MPC/Force
  • New: The new Bitwig 5 clip release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Shift+Stop All Clips button triggers the alternative stop function.
  • New: (Force only): Use SELECT in combination with a pad to only select a clip or scene.
  • New: (Force only): Use SHIFT+Scene button to trigger the alternative Scene function.
• OSC
  • New: 'launch' has now a parameter to trigger press and release on both clips and scenes.
  • New: Added 'launchAlt' to trigger the alternative launch function on both clips and scenes.
  • New: Added sending: /track/{1-8}/send/{1-8}/activated - Is the send disabled or enabled?
  • New: Added sending: /device/layer/{1-8}/send/{1-8}/activated - Is the send disabled or enabled?
  • New: Added receive: /track/{1-8}/send/{1-8}/activated - Toggle the send disabled or enabled.
  • New: Added receive: /device/layer/{1-8}/send/{1-8}/activated - Toggle the send disabled or enabled.
  • New: Added receive: /track/stopAlt - Alternative function to stop playback on the track, e.g. not quantized.
  • New: Added receive: /clip/stopallAlt - Alternative function to stop the playback of all clips, e.g. not quantized.
• Push
  • New: The new Bitwig 5 clip and scene release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button. The previous long press function to select a clip had to be removed to make this work.
  • New: Use Select+Clip/Scene to select it.
  • New: The birds-eye view in Session mode is now activated by holding Shift+Select.
  • New: Stop Clip button+first row buttons triggers the alternative stop function.
  • New: Shift+Stop Clip button triggers the alternative stop all function.
  • New: Sends can be dis-/enabled. Keep SHIFT pressed, then additionally SELECT and finally touch a knob which modifies a send.
  • New: Added some CLAP devices to the Add Track settings.
  • Fixed: Birds-eye view in Session mode had a blinking issue.
• SL Mk II
  • New: The new Bitwig 5 scene release function can be used.
  • Fixed: Transport commands did not work in Play mode.
  • Fixed: Display of scene names did not work for non-existing scenes.
• Turn
  • New: The new Bitwig 5 clip release and alternative functions can be used. The alternative functions are triggered in combination with the SHIFT button.
  • New: Hold Select to select a clip without starting playback.
  • New: Shift+stop buttons: Stop the playing clip on the channel using the alternative setting.