rtsp-simple-server.yml

# supported stream protocols (the handshake is always performed with TCP)
protocols: [udp, tcp]
# port of the TCP RTSP listener
rtspPort: 8554
# port of the UDP RTP listener
rtpPort: 8000
# port of the UDP RTCP listener
rtcpPort: 8001
# command to run when a client connects.
# this is terminated with SIGINT when a client disconnects.
runOnConnect:
# timeout of read operations
readTimeout: 10s
# timeout of write operations
writeTimeout: 5s
# supported authentication methods
authMethods: [basic, digest]
# enable pprof on port 9999 to monitor performances
pprof: false

# these settings are path-dependent. The settings under the path 'all' are
# applied to all paths that do not match a specific entry.
paths:
  all:
    # source of the stream - this can be:
    # * record -> the stream is provided by a client through the RECORD command (like ffmpeg)
    # * rtsp://original-url -> the stream is pulled from another RTSP server
    source: record
    # if the source is an RTSP url, this is the protocol that will be used to pull the stream
    sourceProtocol: udp

    # username required to publish
    publishUser:
    # password required to publish
    publishPass:
    # IPs or networks (x.x.x.x/24) allowed to publish
    publishIps: []

    # username required to read
    readUser:
    # password required to read
    readPass:
    # IPs or networks (x.x.x.x/24) allowed to read
    readIps: []

    # command to run when a client starts publishing.
    # This is terminated with SIGINT when a client stops publishing.
    runOnPublish:

    # command to run when a clients starts reading.
    # This is terminated with SIGINT when a client stops reading.
    runOnRead: