TB6600 Motor Driver, do they require a driver file to work with an Arduino Uno and CNC Shield?

[SmokinPete55]

I have made my own Laser engraver and previously used an Arduino with a CNC Shield on it. After working for several months, I began to burn up power supplies (2) and went through two controller cards. I had recently purchased a different controller card but tech support says it won't work with a Mac at all and I would also need to operate the card with a windows 7 machine. Absolutely ridiculous as there are probably very few out there and are no longer supported by Microsoft.

I have since gone back with the shield but have integrated TB6600s for X-Axis and Y-Axis. I have a basic schematic drawn up and want to find out if there are driver files for the TB6600s? Query on internet says yes, but I have yet to find any. Before I tear everything apart and reset the Arduino/CNC Shield in my case.

Any assistance would be greatly appreciated. Thanks in advance!!!

All but last wiring of motor connections is neatly routed. This is where I ran into problems and the manufacturing company gave me the info above.