usb_descriptors.c

/* 
 * The MIT License (MIT)
 *
 * Copyright (c) 2019 Ha Thach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 */

#include "tusb.h"

/* A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
 * Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
 *
 * Auto ProductID layout's Bitmap:
 *   [MSB]         HID | MSC | CDC          [LSB]
 */
#define _PID_MAP(itf, n)  ( (CFG_TUD_##itf) << (n) )
#define USB_PID  0x7332         /*(0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
                           _PID_MAP(MIDI, 3) | _PID_MAP(VENDOR, 4) )*/

#define USB_BCD   0x0200
#define USB_VID   0x1209

//--------------------------------------------------------------------+
// Device Descriptors
//--------------------------------------------------------------------+
tusb_desc_device_t const desc_device =
{
  .bLength            = sizeof(tusb_desc_device_t),
  .bDescriptorType    = TUSB_DESC_DEVICE,
  .bcdUSB             = USB_BCD,

  // Use Interface Association Descriptor (IAD) for CDC
  // As required by USB Specs IAD's subclass must be common class (2) and protocol must be IAD (1)
  .bDeviceClass       = TUSB_CLASS_MISC,
  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
  .bDeviceProtocol    = MISC_PROTOCOL_IAD,

  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,

  .idVendor           = USB_VID,
  .idProduct          = USB_PID,
  .bcdDevice          = 0x0101,

  .iManufacturer      = 0x01,
  .iProduct           = 0x02,
  .iSerialNumber      = 0x03,

  .bNumConfigurations = 0x01
};

// Invoked when received GET DEVICE DESCRIPTOR
// Application return pointer to descriptor
uint8_t const * tud_descriptor_device_cb(void)
{
  return (uint8_t const *) &desc_device;
}

//--------------------------------------------------------------------+
// Configuration Descriptor
//--------------------------------------------------------------------+

#define USB_TEST 1

enum
{
  #ifndef USB_TEST
  ITF_NUM_CDC = 0,
  ITF_NUM_CDC_DATA,
  #else
  ITF_NUM_CDC_0 = 0,
  ITF_NUM_CDC_0_DATA,
  ITF_NUM_CDC_1,
  ITF_NUM_CDC_1_DATA,
  ITF_NUM_MSC,
  #endif
  ITF_NUM_TOTAL
};

#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In, 5 Bulk etc ...
  #define EPNUM_CDC_NOTIF   0x81
  #define EPNUM_CDC_OUT     0x02
  #define EPNUM_CDC_IN      0x82

  #define EPNUM_MSC_OUT     0x05
  #define EPNUM_MSC_IN      0x85

#elif CFG_TUSB_MCU == OPT_MCU_SAMG  || CFG_TUSB_MCU ==  OPT_MCU_SAMX7X
  // SAMG & SAME70 don't support a same endpoint number with different direction IN and OUT
  //    e.g EP1 OUT & EP1 IN cannot exist together
  #define EPNUM_CDC_NOTIF   0x81
  #define EPNUM_CDC_OUT     0x02
  #define EPNUM_CDC_IN      0x83

  #define EPNUM_MSC_OUT     0x04
  #define EPNUM_MSC_IN      0x85

#elif CFG_TUSB_MCU == OPT_MCU_CXD56
  // CXD56 doesn't support a same endpoint number with different direction IN and OUT
  //    e.g EP1 OUT & EP1 IN cannot exist together
  // CXD56 USB driver has fixed endpoint type (bulk/interrupt/iso) and direction (IN/OUT) by its number
  // 0 control (IN/OUT), 1 Bulk (IN), 2 Bulk (OUT), 3 In (IN), 4 Bulk (IN), 5 Bulk (OUT), 6 In (IN)
  #define EPNUM_CDC_NOTIF   0x83
  #define EPNUM_CDC_OUT     0x02
  #define EPNUM_CDC_IN      0x81

  #define EPNUM_MSC_OUT     0x05
  #define EPNUM_MSC_IN      0x84

#else
  #ifndef USB_TEST
  #define EPNUM_CDC_NOTIF   0x81
  #define EPNUM_CDC_OUT     0x02
  #define EPNUM_CDC_IN      0x82

  #define EPNUM_MSC_OUT     0x03
  #define EPNUM_MSC_IN      0x83
  #else
  #define EPNUM_CDC_0_NOTIF   0x81
  #define EPNUM_CDC_0_OUT     0x02
  #define EPNUM_CDC_0_IN      0x82

  #define EPNUM_CDC_1_NOTIF   0x83
  #define EPNUM_CDC_1_OUT     0x04
  #define EPNUM_CDC_1_IN      0x84

  #define EPNUM_MSC_OUT     0x05
  #define EPNUM_MSC_IN      0x85
  #endif
  


#endif

#ifndef USB_TEST
#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
#else
#define CONFIG_TOTAL_LEN    (TUD_CONFIG_DESC_LEN + TUD_CDC_DESC_LEN + TUD_CDC_DESC_LEN + TUD_MSC_DESC_LEN)
#endif

// full speed configuration
uint8_t const desc_fs_configuration[] =
{
  // Config number, interface count, string index, total length, attribute, power in mA
  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),
  #ifndef USB_TEST
  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
  #else
  // 1st CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_0, 4, EPNUM_CDC_0_NOTIF, 8, EPNUM_CDC_0_OUT, EPNUM_CDC_0_IN, 64),

  // 2nd CDC: Interface number, string index, EP notification address and size, EP data address (out, in) and size.
  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC_1, 6, EPNUM_CDC_1_NOTIF, 8, EPNUM_CDC_1_OUT, EPNUM_CDC_1_IN, 64),

  #endif
  // Interface number, string index, EP Out & EP In address, EP size
  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 64),
};

#if TUD_OPT_HIGH_SPEED
// Per USB specs: high speed capable device must report device_qualifier and other_speed_configuration

// high speed configuration
uint8_t const desc_hs_configuration[] =
{
  // Config number, interface count, string index, total length, attribute, power in mA
  TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, 0x00, 100),

  // Interface number, string index, EP notification address and size, EP data address (out, in) and size.
  TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 512),

  // Interface number, string index, EP Out & EP In address, EP size
  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, 512),
};

// other speed configuration
uint8_t desc_other_speed_config[CONFIG_TOTAL_LEN];

// device qualifier is mostly similar to device descriptor since we don't change configuration based on speed
tusb_desc_device_qualifier_t const desc_device_qualifier =
{
  .bLength            = sizeof(tusb_desc_device_qualifier_t),
  .bDescriptorType    = TUSB_DESC_DEVICE_QUALIFIER,
  .bcdUSB             = USB_BCD,

  .bDeviceClass       = TUSB_CLASS_MISC,
  .bDeviceSubClass    = MISC_SUBCLASS_COMMON,
  .bDeviceProtocol    = MISC_PROTOCOL_IAD,

  .bMaxPacketSize0    = CFG_TUD_ENDPOINT0_SIZE,
  .bNumConfigurations = 0x01,
  .bReserved          = 0x00
};

// Invoked when received GET DEVICE QUALIFIER DESCRIPTOR request
// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete.
// device_qualifier descriptor describes information about a high-speed capable device that would
// change if the device were operating at the other speed. If not highspeed capable stall this request.
uint8_t const* tud_descriptor_device_qualifier_cb(void)
{
  return (uint8_t const*) &desc_device_qualifier;
}

// Invoked when received GET OTHER SEED CONFIGURATION DESCRIPTOR request
// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
// Configuration descriptor in the other speed e.g if high speed then this is for full speed and vice versa
uint8_t const* tud_descriptor_other_speed_configuration_cb(uint8_t index)
{
  (void) index; // for multiple configurations

  // if link speed is high return fullspeed config, and vice versa
  // Note: the descriptor type is OHER_SPEED_CONFIG instead of CONFIG
  memcpy(desc_other_speed_config,
         (tud_speed_get() == TUSB_SPEED_HIGH) ? desc_fs_configuration : desc_hs_configuration,
         CONFIG_TOTAL_LEN);

  desc_other_speed_config[1] = TUSB_DESC_OTHER_SPEED_CONFIG;

  return desc_other_speed_config;
}

#endif // highspeed


// Invoked when received GET CONFIGURATION DESCRIPTOR
// Application return pointer to descriptor
// Descriptor contents must exist long enough for transfer to complete
uint8_t const * tud_descriptor_configuration_cb(uint8_t index)
{
  (void) index; // for multiple configurations

#if TUD_OPT_HIGH_SPEED
  // Although we are highspeed, host may be fullspeed.
  return (tud_speed_get() == TUSB_SPEED_HIGH) ?  desc_hs_configuration : desc_fs_configuration;
#else
  return desc_fs_configuration;
#endif
}

//--------------------------------------------------------------------+
// String Descriptors
//--------------------------------------------------------------------+

// array of pointer to string descriptors
char const* string_desc_arr [] =
{
  (const char[]) { 0x09, 0x04 }, // 0: is supported language is English (0x0409)
  "Bus Pirate",                  // 1: Manufacturer
  "Bus Pirate 5",                // 2: Product
  "123456789012",                // 3: Serials, should use chip ID
  "Bus Pirate CDC",                 // 4: CDC Interface
  "Bus Pirate MSC",                 // 5: MSC Interface
  "Bus Pirate BIN"                  // 6: Binary CDC Interface
};

static uint16_t _desc_str[32];

// Invoked when received GET STRING DESCRIPTOR request
// Application return pointer to descriptor, whose contents must exist long enough for transfer to complete
uint16_t const* tud_descriptor_string_cb(uint8_t index, uint16_t langid)
{
  (void) langid;

  uint8_t chr_count;

  if ( index == 0)
  {
    memcpy(&_desc_str[1], string_desc_arr[0], 2);
    chr_count = 1;
  }else
  {
    // Note: the 0xEE index string is a Microsoft OS 1.0 Descriptors.
    // https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-defined-usb-descriptors

    if ( !(index < sizeof(string_desc_arr)/sizeof(string_desc_arr[0])) ) return NULL;

    const char* str = string_desc_arr[index];

    // Cap at max char
    chr_count = strlen(str);
    if ( chr_count > 31 ) chr_count = 31;

    // Convert ASCII string into UTF-16
    for(uint8_t i=0; i<chr_count; i++)
    {
      _desc_str[1+i] = str[i];
    }
  }

  // first byte is length (including header), second byte is string type
  _desc_str[0] = (TUSB_DESC_STRING << 8 ) | (2*chr_count + 2);

  return _desc_str;
}