ci.yml

name: CI

on:
  push:
    branches:
      - master
  pull_request:
#  schedule:
#    - cron: '0 0 * * 1'


jobs:
  build-offline:
    name: linux-offline
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Building r2 without network access
      run: |
        ./preconfigure
        echo UNPLUG
        sudo rm -f /etc/resolv.conf || true
        ping av.com || true
        ./configure --with-rpath --prefix=/usr
        make -j ; sudo make install
  build-oldlibs:
    name: linux-acr-oldlibsbug
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Setting up bad libnames
      run: |
        mkdir -p /tmp/fakelibs /tmp/fakeincs
        for a in anal asm cons crypto flag hash lang parse reg search syscall util ; do touch /tmp/fakelibs/libr_$a.a ; touch /tmp/fakelibs/libr_$a.so ; done
        touch /tmp/fakeincs/r_util.h
        chmod 000 /tmp/fakelibs/*
        export CFLAGS=-I/tmp/fakeincs/
        export LDFLAGS=-L/tmp/fakelibs/
        sys/install.sh
  build-nocs:
    name: linux-nocs
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Building without capstone
      run: |
        cp -f dist/plugins-cfg/plugins.nocs.cfg plugins.cfg
        ./configure --without-capstone && make -j
  build-wasi:
    name: linux-wasi
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Installing with symlinks
      run: |
        sys/wasi.sh
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( cd sys;python version.py )"
      id: r2v
    - uses: actions/upload-artifact@v2
      with:
        name: radare2-${{ steps.r2v.outputs.branch }}-wasi.zip
        path: radare2-*-wasi.zip
  build-acr-gperf:
    name: linux-acr-gperf
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Install dependencies
      run: |
        python -m pip install --upgrade pip
        pip install meson ninja r2pipe wget
        sudo apt install gperf
    - name: Installing with symlinks
      run: |
        export CFLAGS="-O2 -Werror -Wno-unused-result -Wno-stringop-truncation"
        sys/install.sh
    - name: Running tests
      run: r2r test/db/cmd
  build-resymlink:
    name: linux-acr-resymlink
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Installing with symlinks
      run: |
        export CFLAGS="-O2 -Werror -Wno-unused-result -Wno-stringop-truncation"
        sys/install.sh
    - name: Uninstalling
      run: sudo make uninstall
    - name: Reinstalling without symlinks
      run: sudo make install
  build-rpath-linux:
    if: contains(github.ref, 'master') || contains(github.ref, 'ci-')
    name: linux-rpath
    continue-on-error: true
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: build and run
      run: |
        # test and build rpath installation
        export CFLAGS=-O0
        ./configure --prefix=/tmp --with-rpath
        make -j
        make install
        ldd /tmp/bin/r2
        /tmp/bin/r2 -v
        /tmp/bin/rabin2 -l /tmp/bin/r2
  build-rpath-macos:
    if: contains(github.ref, 'master') || contains(github.ref, 'ci-')
    name: macos-rpath
    continue-on-error: true
    runs-on: macos-latest
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: build and run
      run: |
        # test and build rpath installation
        export CFLAGS=-O0
        ./configure --prefix=/tmp --with-rpath
        make -j
        make install
        /tmp/bin/r2 -v
        /tmp/bin/rabin2 -l /tmp/bin/r2
  build-spaces:
    name: linux-meson-spaces
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    #- name: XXX this is not possible with make Install from a directory with spaces
    #  run: |
    #    git config pull.rebase false
    #    git clone --depth 1 https://github.com/radareorg/radare2 "spa ces" ; cd "spa ces" ; ./sys/install.sh > /dev/null ; cd ..
    #    r2 -v
    # - name: Install to a directory with spaces using ACR/MAKE
    #  run: |
    #    git config --global pull.rebase false
    #    git clone --depth 1 https://github.com/radareorg/radare2
    #    cd radare2
    #    ./configure --prefix=/usr/local; make uninstall
    #    ./configure --prefix=/usr; make uninstall
    #    ./sys/install.sh "/usr/spa ces" > /dev/null
    #    LD_LIBRARY_PATH="/usr/spa ces/lib" PATH="/usr/spa ces/bin:$PATH" r2 -v
    #    cd ..
    - name: Build on a directory with spaces (meson only)
      run: |
        export PATH=${HOME}/.local/bin:${HOME}/Library/Python/3.9/bin:${PATH}
        sudo apt-get --assume-yes install python3-wheel gperf python3-setuptools cabextract gperf
        sudo pip3 install meson ninja
        git config --global pull.rebase false
        git clone --depth 1 . "spa ces"
        cd "spa ces"
        export CFLAGS="-O2 -Werror -Wno-unused-result -Wno-stringop-truncation"
        meson --prefix="/tmp/r 2" build
        ninja -C build
        ninja -C build install
        cd ..
        find "/tmp/r 2"
        LD_LIBRARY_PATH="/tmp/r 2/lib/x86_64-linux-gnu/" "/tmp/r 2/bin/r2" -v
  linux-static:
    runs-on: ubuntu-20.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Installing the musl runtime
      run: |
        sudo apt install musl-tools
    - name: Building static r2 with acr
      run: |
        cp -f dist/plugins-cfg/plugins.static.nogpl.cfg plugins.cfg
        NOLTO=1 sys/static.sh
        # NOLTO=1 sys/static.sh
        make -C binr/blob
        tar cJvf r2-static.tar.xz r2-static
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( cd sys;python version.py )"
      id: r2v
    - name: Pub
      uses: actions/upload-artifact@v2
      with:
        name: radare2-${{ steps.r2v.outputs.branch }}-static.tar.xz
        path: r2-static.tar.xz
    - name: Static static r2 with meson
      run: |
        sudo apt-get --assume-yes install python3-wheel python3-setuptools cabextract gperf
        sudo pip3 install meson ninja
        CFLAGS="-static" LDFLAGS="-static" meson --prefix=${HOME}/.local --buildtype release --default-library static build
        ninja -C build && ninja -C build install
  linux-acr-deb-64:
    runs-on: ubuntu-18.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Packaging for Debian
      run: sys/debian.sh
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( cd sys; python version.py )"
      id: r2v
    - name: Pub
      uses: actions/upload-artifact@v2
      with:
        name: radare2_${{ steps.r2v.outputs.branch }}-debian_amd64.zip
        path: dist/debian/*/*.deb
  linux-acr-deb-32:
    runs-on: ubuntu-18.04
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Packaging for 32bit Debian
      run: |
        sudo apt install gcc-multilib gperf
        export CFLAGS=-m32
        export LDFLAGS=-m32
        export ARCH=i386
        sys/debian.sh
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( cd sys;python version.py )"
      id: r2v
    - name: Pub
      uses: actions/upload-artifact@v2
      with:
        name: radare2_${{ steps.r2v.outputs.branch }}-debian_i386.zip
        path: dist/debian/*/*.deb
## RPM PACKAGES DISABLED
#  linux-meson-rpm:
#    runs-on: ubuntu:18.04
#    container: centos:8
#    steps:
#    - name: Checkout
#      uses: actions/checkout@v2
#    - name: Prepare Skeleton
#      run: |
#        mkdir -p SOURCES SPECS
#        cp -f dist/rpm/*spec SPECS
#        wget -O https://github.com/radareorg/radare2/archive/master/radare2-5.1.0-git.tar.gz
#    - name: rpmbuild
#      uses: robertdebock/rpmbuild-action@1.1.1
#    - name: Pub
#      uses: actions/upload-artifact@v2
#      with:
#        path: RPMS/*/*.rpm *.rpm dist/rpm/*.rpm
#  centos-meson-rpm:
#    runs-on: ubuntu:18.04
#    container: centos:8
#    steps:
#    - name: Checkout
#      uses: actions/checkout@v2
#    - name: Install tools for CentOS:8
#      run: |
#        yum install -y patch unzip git gcc make python38 python38-pip rpm-build rpmdevtools wget
#        pip3.8 install meson ninja r2pipe
#    - name: Building with Meson
#      run: |
#        meson build
#        ninja -C build
#        ninja -C build install
#    - name: RPM Packaging
#      run: |
#        cp -f dist/rpm/radare2.spec .
#        rpmdev-setuptree
#        mkdir -p rpmbuild/SOURCES
#        cd rpmbuild/SOURCES
#        wget https://github.com/radareorg/radare2/archive/5860c3efc12d4b75e72bdce4b1d3834599620913/radare2-5.1.0-git.tar.gz
#        cd -
#        rpmbuild -ba radare2.spec
#    - name: Pub
#      uses: actions/upload-artifact@v2
#      with:
#        path: rpmbuild/RPMS/*/*.rpm
  linux-asan-fuzz:
    runs-on: ubuntu-20.04
    continue-on-error: true
    if: contains(github.ref, 'master') || contains(github.ref, 'ci-')
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Building Radare2
      run: |
        pip install r2pipe
        sys/sanitize.sh
    - name: Installing tools for the testsuite
      run: sudo apt-get --assume-yes install python3-wheel python3-setuptools cabextract gperf
    - name: Running tests
      run: |
        export ASAN_OPTIONS=detect_leaks=0
        export R2R_SKIP_ARCHOS=1
        export LD_LIBRARY_PATH=/usr/local/lib
        export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libasan.so.5
        make tests
    - name: Run fuzz tests
      run: |
        export ASAN_OPTIONS=detect_leaks=0
        export R2R_SKIP_ARCHOS=1
        export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libasan.so.5
        make -C test fuzz-tests
  linux-test:
    runs-on: ubuntu-20.04
#    if: contains(github.ref, 'ci-')
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Building Radare2
      run: |
        pip install r2pipe wheel
        export CFLAGS="-O2 -Wno-unused-result"
        sys/install.sh
    - name: Running tests
      run: |
        export LD_LIBRARY_PATH=/usr/local/lib
        make tests

  # Apple
  macos-acr:
    runs-on: macos-latest
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Packaging
      run: dist/macos/build-pkg.sh
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( python sys/version.py )"
      id: r2v
#    - name: Building Radare2
#      run: |
#        export CFLAGS="-O2" # -Werror -Wno-unused-result -Wno-unicode -Wno-unneeded-internal-declaration"
#        sys/install.sh && make -C dist/macos
    - name: Pub
      uses: actions/upload-artifact@v2
      with:
        path: dist/macos/*.pkg
        name: radare2-${{ steps.r2v.outputs.branch }}_macos.pkg
#   macos-acr-m1:
#     runs-on: macos-latest
#     steps:
#     - name: Checkout
#       uses: actions/checkout@v2
#     - name: Packaging
#       run: export CC="xcrun --sdk macosx11.1 gcc -arch arm64" ; dist/macos/build-pkg.sh
#     - name: Extract r2 version
#       run: echo "##[set-output name=branch;]$( python sys/version.py )"
#       id: r2v
#     - name: Pub
#       uses: actions/upload-artifact@v2
#       with:
#         path: dist/macos/*.pkg
#         name: radare2-${{ steps.r2v.outputs.branch }}_macos_m1.pkg
  macos-test:
    runs-on: macos-latest
    if: contains(github.ref, 'master') || contains(github.ref, 'ci-')
    steps:
    - name: Checkout
      uses: actions/checkout@v2
    - name: Install dependencies
      run: |
        python -m pip install --upgrade pip
        pip install r2pipe
    - name: Building Radare2
      run: export CFLAGS="-O2"; sys/install.sh
    - name: Running tests
      run: pip3 install r2pipe; make tests

  # Mobile
  ios-cydia:
    if: contains(github.ref, 'master') || contains(github.ref, 'ci-')
    runs-on: macos-latest
    steps:
    - uses: actions/checkout@v2
    - name: Install pkg-config/ldid2 with Homebrew
      run: brew install pkg-config ldid
#     - name: Create cydia32 package
#       run: ./sys/ios-cydia32.sh
#     - name: List sys/cydia
#       run: ls -lahR ./sys/cydia
#     - uses: actions/upload-artifact@v2
#       with:
#         name: radare2-arm32_${{ steps.extract_version.outputs.branch }}_iphoneos-arm
#         path: ./dist/cydia/radare2/radare2-arm32_${{ steps.extract_version.outputs.branch }}_iphoneos-arm.deb
    - name: Create cydia package
      run: ./sys/ios-cydia.sh
    - name: Create iOS SDK
      run: |
        ./sys/ios-sdk.sh
        pushd /tmp/r2ios
        zip -r /tmp/r2ios-sdk.zip *
        popd
        mv /tmp/r2ios-sdk.zip .
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( python sys/version.py )"
      id: r2v
    - uses: actions/upload-artifact@v2
      with:
        name: r2ios_sdk-${{ steps.r2v.outputs.branch }}.zip
        path: ./r2ios-sdk.zip
    - uses: actions/upload-artifact@v2
      with:
        name: radare2-${{ steps.r2v.outputs.branch }}_iphoneos-arm64.zip
        path: ./dist/cydia/radare2*/*.deb

  android-acr-aarch64:
    if: contains(github.ref, 'master') || contains(github.ref, 'ci-')
    runs-on: ubuntu-latest
    strategy:
      fail-fast: false
    steps:
    - uses: actions/checkout@v2
    - name: Install dependencies
      run: sudo apt-get --assume-yes install pax wget gperf cabextract unzip python3-wheel python3-setuptools python3-pip && pip3 install --user meson ninja
    - name: Compile with acr
      run: |
        sys/android-ndk-install.sh
        sys/android-build.sh arm64
        ls -l
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( cd sys;python version.py )"
      id: r2v
    - uses: actions/upload-artifact@v2
      with:
        name: radare2-${{ steps.r2v.outputs.branch }}-android-aarch64.tar.gz
        path: radare2*android*aarch64.tar.gz

  android-meson:
    if: contains(github.ref, 'master') || contains(github.ref, 'ci-')
    runs-on: ubuntu-latest
    strategy:
      fail-fast: false
      matrix:
      #  name: [x86_64, arm, aarch64]
        name: [x86_64, arm]
    steps:
    - uses: actions/checkout@v2
    - name: Install dependencies
      run: sudo apt-get --assume-yes install pax wget cabextract unzip python3-wheel python3-setuptools python3-pip && pip3 install --user meson ninja
    - name: Compile with meson
      run: |
        export PATH=${HOME}/.local/bin:${PATH}
        CFLAGS="-static" LDFLAGS="-static" meson --buildtype release --default-library static --prefix=/tmp/android-dir -Dblob=true build --cross-file .github/meson-android-${{ matrix.name }}.ini
        ninja -C build && ninja -C build install
    - name: Create radare2-android-${{ matrix.name }}.tar.gz
      run: |
        cd /tmp
        rm -rf android-dir/include android-dir/lib
        tar --transform 's/android-dir/data\/data\/org.radareorg.radare2installer/g' -cvf radare2-android-${{ matrix.name }}.tar.gz android-dir/
    - name: Extract r2 version
      run: echo "##[set-output name=branch;]$( cd sys;python version.py )"
      id: r2v
    - uses: actions/upload-artifact@v2
      with:
        name: radare2-${{ steps.r2v.outputs.branch }}-android-${{ matrix.name }}.tar.gz
        path: /tmp/radare2-android-${{ matrix.name }}.tar.gz