Skip to content

Latest commit

 

History

History
146 lines (105 loc) · 11.7 KB

use_cli_effectively.md

File metadata and controls

146 lines (105 loc) · 11.7 KB
Raw

Tips for using Azure CLI effectively

For clarity, Bash scripts are used inline. Windows batch or PowerScript examples are listed in the appendix, which you can use to build similiar examples.

Use the right output mode for your work (json, table, or tsv)

  1. json format is the CLI's default, and is intended to give you the most comprehensive information. If you prefer a different format, use the --output argument to override for an individual command invocation, or use az configure to update your global default. Note that JSON format preserves the double quotes, generally making in unsuitable for scripting purposes.

  2. table is useful for getting a summary of focused information, particularly for list commands. If you do not like the fields in the default table format (or there isn't a default format), you can use --output json to see all information, or leverage --query to specify a format you like.

    az vm show -g my_rg -n my_vm --query "{name: name, os:storageProfile.imageReference.offer}" -otable
Name    Os
------  ------------
my_vm   UbuntuServer

  3. tsv for concise output and scripting purposes. The will strip double quotes that the JSON format preserves. To specify the format you want for TSV, use the --query argument.

    export vm_ids=$(az vm list -d -g my_rg --query "[?powerState=='VM running'].id" -o tsv)  
az vm stop --ids $vm_ids

Passing values from one command to the other

  1. If the value will be used more than once, assign it to a variable. Note the use of -o tsv in the following example:

    running_vm_ids=$(az vm list -d -g my_rg --query "[?powerState=='VM running'].id" -o tsv)

  2. If the value is used only once, consider piping:

    az vm list --query "[?powerState=='VM running'].name" | grep my_vm

  3. For lists consider the following suggestions:

    If you need more controls on the result, use "for" loop:

       #!/usr/bin/env bash
   for vm in $(az vm list -d -g my_rg --query "[?powerState=='VM running'].id" -o tsv); do
       echo stopping $vm
       az vm stop --ids $vm
       if [ $? -ne 0 ]; then
           echo "Failed to stop $vm"
           exit 1
       fi
       echo $vm stopped
   done

    Alternatively, use xargs and consider using the -P flag to run the operations in parallel for improved performance:

      az vm list -d -g my_rg --query "[?powerState=='VM stopped'].id" -o tsv | xargs -I {} -P 10 az vm start --ids "{}"

    Finally, Azure CLI has built-in support to process commands with multiple --ids in parallel to achieve the same effect of xargs. Note that @- is used to get values from the pipe:

      az vm list -d -g my_rg --query "[?powerState=='VM stopped'].id" -o tsv | az vm start --ids @-

Async Operations

Many commands and group expose --no-wait flags on their long-running operations as well as a dedicated wait command. These become handy for certain scenarios:

  1. Cleaning up resources when you aren't relying on the clean up for some subsequent operation, such as deleting a resource group:

     az group delete -n my_rg --no-wait

  2. When you want to create multiple independent resources in parallel. This is similar to creating and joining threads:

       az vm create -g my_rg -n vm1 --image centos --no-wait
   az vm create -g my_rg -n vm2 --image centos --no-wait

   subscription=$(az account show --query "id" -otsv)
   vm1_id="/subscriptions/$subscription/resourceGroups/my_rg/providers/Microsoft.Compute/virtualMachines/vm1"
   vm2_id="/subscriptions/$subscription/resourceGroups/my_rg/providers/Microsoft.Compute/virtualMachines/vm2"
   az vm wait --created --ids $vm1_id $vm2_id

Using the Generic Update Arguments

Most update commands in the CLI feature the three generic arguments: --add, --set and --remove. These arguments are powerful but often less convenient than the strongly-typed arguments typically featured in update commands. The CLI provides strongly-typed arguments for most common scenarios for ease-of-use, but if the property you want to set isn't listed, the generic update arguments will often present a path forward to unblock you without having to wait for a new release.

  1. The generic update syntax isn't the most user friendly, so it will require some patience.

  2. Verify whether the update command has the Generic Update Arguments group exposed. If not, you'll need to file an issue, but if they are you can attempt you scenario using them.

  3. Use the show command on the resource you are interested in to figure out what path you should supply in the generic arguments. For example, before you try out az vm update, run az vm show to determine the right path. Generally, you will use dot syntax to access dictionary properties and brackets to index into lists.

  4. Check out working examples to get started. az vm update -h has good ones.

  5. --set and --add take a list of key value pairs in the format of <key1>=<value1> <key2>=<value2>. Use them to construct non- trivial payloads. If the syntax gets too message, consider using a JSON string. For example, to attach a new data disk to a VM:

    az vm update -g my_rg -n my_vm --add storageProfile.dataDisks "{\"createOption\": \"Attach\", \"managedDisk\": {\"id\": \"/subscriptions/0b1f6471-1bf0-4dda-aec3-cb9272f09590/resourceGroups/yg/providers/Microsoft.Compute/disks/yg-disk\"}, \"lun\": 1}"

You may find it more useful to leverage the CLI's @{file} convention, putting the JSON into a file and loading it. This simplifies the above command to:

     az vm update -g my_rg -n my_vm --add storageProfile.dataDisks @~/my_disk.json

Quoting Issues

This becomes an issue because when the command shell (bash, zsh, Windows command prompt, etc) parses the CLI command, it will interpret the quotes. To avoid surprises, here are a few suggestions:

  1. If the value contains whitespace, you must wrap it in quotes.
  2. In bash or Windows PowerShell, both single and double quotes will be intepreted, while in Windows command prompt, only double quotes are handled which means single quotes will be interpreted as a part of the value.
  3. If your command only runs on bash (or zsh), using single quotes has the benefit of preserving the content inside. This can be very helpful when supplying inline JSON. For example this works in bash: '{"foo": "bar"}'
  4. If your command will run on Windows command prompt, you must use double quotes exclusively. If the value contains double quotes, you must escape it: "i like to use \" a lot". The command prompt equivalent of the above would be: "{\"foo\": \"bar\"}"
  5. Exported variables in bash inside double quotes will be evaluated. If this is not what you want, again use \ to escape it like "\\$var" or use single quotes '$var'.
  6. A few CLI arguments, including the generic update arguments, take a list of space-separated values, like <key1>=<value1> <key2>=<value2>. Since the key name and value can take arbitary string which might contain whitespace, using quotes will be necessary. Wrap the pair, not individual key or value. So "my name"=john is wrong. Instead, use "my name=john". For example: az webapp config appsettings set -g my_rg -n my_web --settings "client id=id1" "my name=john"
  7. Use CLI's @<file> convention to load from a file so to bypass the shell's intepretion mechanisms: az ad app create --display-name my-native --native-app --required-resource-accesses @manifest.json
  8. When a CLI argument says it accepts a space-separated list, these are the formats accepted:
    • --arg foo bar: OK. Unquoted, space-separated list
    • --arg "foo" "bar": OK: Quoted, space-separated list
    • --arg "foo bar": BAD. This is a string with a space in it, not a space-separated list.

Generic Resource Commands

There may be cases where a service you are interested in does not have CLI command coverage. You can use the az resource create/show/list/delete/update/invoke-action commands to work with these resources. A few suggestions here:

  1. If only create/update are involved, consider using az group deployment create. Leverage Azure Quickstart Templates for working examples.
  2. Check out the Rest API reference for the request payload, URL and API version. As an examplee, check out the community's comments on how to create AppInsights.

Working behind a proxy

Proxy is common behind corporate network or introduced by tracing tools like fiddler, mitmproxy, etc. If the proxy uses self-signed certificates, the Python requests library which CLI depends on will throw SSLError("bad handshake: Error([('SSL routines', 'tls_process_server_certificate', 'certificate verify failed')],)",). There are 2 ways to handle this error:

  1. Disable the certificate check across the CLI by setting the env var of AZURE_CLI_DISABLE_CONNECTION_VERIFICATION to any value. This is not safe, but good for a short period like you want to capture a trace for a specific command and promptly turn it off after done.
  2. Set env var of REQUESTS_CA_BUNDLE to the file path of the proxy server's certificate. This is recommended if you use CLI frequently behind a corporate proxy.

A frequent ask is whether or not HTTP_PROXY or HTTPS_PROXY envionment variables should be set, the answer is it depends. For fiddler on Windows, by default it acts as system proxy on start, you don't need to set anything. If the option is off or using other tools which don't work as system proxy, you should set them. Since almost all traffics from CLI are SSL based, so only HTTPS_PROXY should be set. If you are not sure, just set them, but do remember to unset it after the proxy is shut down. For fiddler, the default value is http://localhost:8888.

For other details, check out Stefan's blog.

Concurrent builds

If you are using az on a build machine, and multiple jobs can be run in parallel, then there is a risk that the login tokens are shared between two build jobs is the jobs run as the same OS user. To avoid mix ups like this, set AZURE_CONFIG_DIR to a directory where the login tokens should be stored. It could be a randomly created folder, or just the name of the jenkins workspace, like this AZURE_CONFIG_DIR=.

Appendix

Windows batch scripts for saving to variables and using it later

   ECHO OFF
   SETLOCAL
   FOR /F "tokens=* USEBACKQ" %%F IN (`az vm list -d -g my_rg --query "[?powerState=='VM running'].id" -o tsv`) DO (
       SET "vm_ids=%%F %vm_ids%"  :: construct the id list
   )
   az vm stop --ids %vm_ids% :: CLI stops all VMs in parallel

Windows PowerShell scrips for saving to variables and using it later

   $vm_ids=(az vm list -d -g my_rg --query "[?powerState=='VM running'].id" -o tsv)
   az vm stop --ids $vm_ids # CLI stops all VMs in parallel

Windows batch scripts to loop through a list

   ECHO OFF
   SETLOCAL
   FOR /F "tokens=* USEBACKQ" %%F IN (`az vm list -d -g my_rg --query "[?powerState=='VM running'].id" -o tsv`) DO (
       ECHO Stopping %%F
       az vm stop --ids %%F
   )

Windows PowerShell scrips to loop through a list

   $vm_ids=(az vm list -d -g my_rg --query "[?powerState=='VM running'].id" -o tsv)
   foreach ($vm_id in $vm_ids) {
       Write-Output "Stopping $vm_id"
       az vm stop --ids $vm_id
   }