Control outdoor awning

[B3rts]

Hi, thanks for this wonderful integration that allows me to use VIMAR with HOMEKIT. Great work.

With Vimar I control an outdoor awning. This is imported into the home assistant as a shutter and therefore the commands and states are reversed.
In fact, in the shutter the command open means raise which, however, in the awning has repercussions as close. And viceversa.
The same happens for the status: in the home assistant it is highlighted in yellow as if it were open but in reality the awning is closed.
I have seen that on the device class there is awning but even by changing this parameter in the customize file the behavior of the commands and the state do not change.
How can I go about solving this problem?
Thanks

[h4de5]

I dont think HA has a native entity for outdoor awnings and therefor I don't think there is an invert option within home-assistant.
the integration can only send the same commands as the vimar webserver. so if it is shown inversed on the webserver as well, the integration will do the same.
I am not sure, but your best option would be to check if the vimar bus controler has an option to invert commands to that device.