Support STM32U0

[sebfr26]

Hi together,

Is anyone planning to add support for the new STM32U0?

[hathach]

currently no plan, since I don't have the dev board just yet.

[sebfr26]

Thank you for your reply.

We are planning to use the STM32U0 with USB in future. We already have Evalboards. How can we support the implemenation? Since we are pretty new to this topic I'm not sure if it make sense to make the implementation by ourselves. On the otherside I hope the U0 is quite similar to the other STMs so that the effort is not that high.

[HiFiPhile]

Hi, they are already many MCU families implemented by contributors.

As U0 use the same DCD as G0, I suggest you to start with G0 and make modifications.
Basically a port needs several parts:

1. Add U0's ID in

   tinyusb/src/tusb_option.h

   Line 93 in ba2f229

   #define OPT_MCU_STM32H5 315 ///< ST H5

2. Add define to choose DCD code named "FSDEV_STM32" in

   tinyusb/src/common/tusb_mcu.h

   Line 237 in ba2f229

   #elif TU_CHECK_MCU(OPT_MCU_STM32G0)

3. Add U0 HAL driver for BSP usage in https://github.com/hathach/tinyusb/blob/master/tools/get_deps.py
4. Create BSP in hw/bsp/stm32u0, you can reference G0's structure https://github.com/hathach/tinyusb/tree/master/hw/bsp/stm32g0
5. Build and test examples.

From your ID are you in France ?

[sebfr26]

Thank you.
We will try to get this running in the next weeks.

I'm from Germany...

[JimmyPedersen]

@sebfr26 Have you tried getting it to run on the stm32u0 yet? Any luck?
Looking for this to as the 'new' usb stack is hard to get working well WITHOUT RTOS ( threadx)