Questions relative to porting of the HA OS to Beagle Bone Black

[Didifred]

I'm quite advanced in porting HA OS to Beagle Bone Black, i have several questions before to do a pull requests if the community is interested ...

• It seems mandatory ( initialization fails in others cases) to have packages BR2_PACKAGE_RPI_RF_MOD and BR2_PACKAGE_RPI_RF_MOD_DTS, it shall concerns obviously only RPI hw ?
• I have one warning at initialization of Home Assistant application that concerns pulsaudio, in *_defconfig the package is not compiled (BR2_PACKAGE_PULSEAUDIO). It sounds every install has this warning so ?
• I've setup BR2_PACKAGE_HASSIO_MACHINE="tinker" and BR2_PACKAGE_OS_AGENT_BOARD="Tinker", since i need something close. Why the supervisor and os agent are dependant to the board BSP, naively i was thinking that HA OS provided APIs independant of the board ? Using it for beagle bone seems work ok, it do not appear to be dependant of board in fact.
• In order to flash the EMMC, i simply dd the image from a SD card bootup debian 12 ( the haos-data expansion is about 3G and the OS itself about 450M shrinking the partition mapping a bit, i'm near to the 3.6G available ...). Then i move data to external media (SD or SSD) via HA web application. Running OS on EMMC give reasonable starting time of the application comparing SD. Maybe i can even remove the haos-data partition from the image, flash it in EMMC and burn the data.ext4 on external media, and first start like this ? Does OS will scan automatically for the partition in external media at first start ?