diff --git a/zipl/src/Makefile b/zipl/src/Makefile
index d116a70b1..25534333b 100644
--- a/zipl/src/Makefile
+++ b/zipl/src/Makefile
@@ -16,13 +16,17 @@ libs =	$(rootdir)/libutil/libutil.a \
 objects = misc.o error.o scan.o job.o boot.o bootmap.o disk.o \
 	  install.o zipl.o $(rootdir)/zipl/boot/data.o
 
-zipl_helpers = $(wildcard zipl_helper.*)
+zipl_helpers = $(basename $(wildcard zipl_helper.*))
 chreipl_helpers = $(subst zipl_,chreipl_, $(zipl_helpers))
 
 all: zipl $(chreipl_helpers)
 
 zipl: $(objects) $(libs)
 
+zipl_helper.device-mapper: $(rootdir)/libdasd/libdasd.a \
+	$(rootdir)/libvtoc/libvtoc.a \
+	$(libs) zipl_helper.device-mapper.o
+
 chreipl_helper.%: zipl_helper.%
 	ln -s $< $@
 
@@ -34,7 +38,7 @@ install: all
 	$(CP) --no-dereference $(chreipl_helpers) $(DESTDIR)$(TOOLS_LIBDIR)
 
 clean:
-	rm -f *.o $(chreipl_helpers) zipl
+	rm -f *.o $(zipl_helpers) $(chreipl_helpers) zipl
 
 .PHONY: all install clean
 
diff --git a/zipl/src/zipl_helper.device-mapper b/zipl/src/zipl_helper.device-mapper
deleted file mode 100644
index 840beffd8..000000000
--- a/zipl/src/zipl_helper.device-mapper
+++ /dev/null
@@ -1,862 +0,0 @@
-#!/usr/bin/perl -w
-#
-# zipl_helper.device-mapper: print zipl parameters for a device-mapper device
-#
-# Copyright IBM Corp. 2009, 2017
-#
-# s390-tools is free software; you can redistribute it and/or modify
-# it under the terms of the MIT license. See LICENSE for details.
-#
-# Depending on the name by which the script is called, it serves one of two
-# purposes:
-#
-# 1. Usage: zipl_helper.device-mapper <target directory> or
-#                                     <major:minor of target device>
-#
-# This tool attempts to obtain zipl parameters for a target directory or
-# partition located on a device-mapper device. It assumes that the
-# device-mapper table for this device conforms to the following rules:
-# - directory is located on a device consisting of a single device-mapper
-#   target
-# - only linear, mirror and multipath targets are supported
-# - supported physical device types are DASD and SCSI devices
-# - all of the device which contains the directory must be located on a single
-#   physical device (which may be mirrored or accessed through a multipath
-#   target)
-# - any mirror in the device-mapper setup must include block 0 of the
-#   physical device
-#
-# 2. Usage: chreipl_helper.device-mapper <major:minor of target device>
-#
-# This tool identifies the physical device which contains the specified
-# device-mapper target devices. If the physical device was found, its
-# major:minor parameters are printed. Otherwise, the script exits with an
-# error message and a non-zero return code.
-#
-
-use strict;
-use File::Basename;
-use POSIX qw/locale_h/;
-
-# Required tools
-our $dmsetup = "dmsetup";
-our $mknod = "mknod";
-our $dasdview = "dasdview";
-our $blockdev = "blockdev";
-
-# Constants
-our $SECTOR_SIZE = 512;
-our $DASD_PARTN_MASK = 0x03;
-our $SCSI_PARTN_MASK = 0x0f;
-
-# Internal constants
-our $DEV_TYPE_CDL = 0;
-our $DEV_TYPE_LDL = 1;
-our $DEV_TYPE_FBA = 2;
-our $DEV_TYPE_SCSI = 3;
-
-our $TARGET_START = 0;
-our $TARGET_LENGTH = 1;
-our $TARGET_TYPE = 2;
-our $TARGET_DATA = 3;
-
-our $TARGET_TYPE_LINEAR = 0;
-our $TARGET_TYPE_MIRROR = 1;
-our $TARGET_TYPE_MULTIPATH = 2;
-
-our $LINEAR_MAJOR = 0;
-our $LINEAR_MINOR = 1;
-our $LINEAR_START_SECTOR = 2;
-
-our $MIRROR_MAJOR = 0;
-our $MIRROR_MINOR = 1;
-our $MIRROR_START_SECTOR = 2;
-
-our $MULTIPATH_MAJOR = 0;
-our $MULTIPATH_MINOR = 1;
-
-sub get_physical_device_dir($);
-sub get_physical_device($$);
-sub get_major_minor($);
-sub get_table($$);
-sub get_linear_data($$);
-sub get_mirror_data($$);
-sub get_multipath_status($);
-sub get_multipath_data($$);
-sub filter_table($$$);
-sub get_target_start($);
-sub get_target_major_minor($);
-sub create_temp_device_node($$$);
-sub get_blocksize($);
-sub get_dasd_info($);
-sub get_partition_start($$);
-sub is_dasd($);
-sub get_partition_base($$$);
-sub get_device_characteristics($$);
-sub get_type_name($);
-sub check_for_mirror($@);
-sub get_target_base($$$$@);
-sub get_device_name($$);
-sub check_tools();
-
-my $phy_geometry;	# Disk geometry of physical device
-my $phy_blocksize;	# Blocksize of physical device
-my $phy_offset;		# Offset in 512-byte sectors between start of physical
-			# device and start of filesystem
-my $phy_type;		# Type of physical device
-my $phy_bootsectors;	# Size of boot record in 512-byte sectors
-my $phy_partstart;	# Partition offset of physical device
-my $phy_major;		# Major device number of physical device
-my $phy_minor;		# Minor device number of physical device
-my @target_list;	# List of dm-targets between filesystem and physical
-			# device.
-my $base_major;		# Major device number of base device.
-my $base_minor;		# Minor device number of base device
-my $directory;		# Command line parameter
-my $toolname;		# Name of tool
-
-# Start
-$toolname = basename($0);
-
-# Setup and use a standard locale to
-# avoid localized scripting output
-$ENV{LC_ALL} = "C"; # for child processes
-setlocale(LC_ALL, "C"); # for current process
-
-# Use alternate code path if called as chreipl helper
-if ($toolname eq "chreipl_helper.device-mapper") {
-	if (!defined($ARGV[0]) || !($ARGV[0] =~ /^\s*(\d+)\s*:\s*(\d+)\s*$/)) {
-		die("Usage: $toolname <major:minor of target devies>\n");
-	}
-	($phy_major, $phy_minor, $phy_offset, @target_list) =
-		get_physical_device($1, $2);
-	print("$phy_major:$phy_minor\n");
-	exit(0);
-}
-
-$directory = $ARGV[0];
-if (!defined($directory)) {
-	die("Usage: $toolname <target directory> or <major:minor of target devies>\n");
-}
-
-# check if needed tools are available
-check_tools();
-
-if (($ARGV[0] =~ /^\s*(\d+)\s*:\s*(\d+)\s*$/)) {
-    	# Determine physical (non-dm) device on which partition is located
-	($phy_major, $phy_minor, $phy_offset, @target_list) =
-		get_physical_device($1,$2);
-}
-else
-{
-	# Determine physical (non-dm) device on which directory is located
-	($phy_major, $phy_minor, $phy_offset, @target_list) =
-		get_physical_device_dir($directory);
-}
-
-# Determine type and characteristics of physical device
-($phy_type, $phy_blocksize, $phy_geometry, $phy_bootsectors, $phy_partstart) =
-	get_device_characteristics($phy_major, $phy_minor);
-
-# Handle partitions
-if ($phy_partstart > 0) {
-	# Only the partition of the physical device is mapped so only the
-	# physical device can provide access to the boot record.
-	($base_major, $base_minor) =
-		get_partition_base($phy_type, $phy_major, $phy_minor);
-	# Check for mirror
-	check_for_mirror(scalar(@target_list) - 1, @target_list);
-	# Adjust filesystem offset
-	$phy_offset += $phy_partstart * ($phy_blocksize / $SECTOR_SIZE);
-	$phy_partstart = 0;
-	# Update device geometry
-	(undef, undef, $phy_geometry, undef, undef) =
-		get_device_characteristics($base_major, $base_minor);
-} else {
-	# All of the device is mapped, so the base device is the top most
-	# dm device which provides access to boot sectors
-	($base_major, $base_minor) =
-		get_target_base($phy_major, $phy_minor, 0, $phy_bootsectors,
-				@target_list);
-}
-
-# Check for valid offset of file system
-if (($phy_offset % ($phy_blocksize / $SECTOR_SIZE)) != 0) {
-	die("Error: File system not aligned on physical block size\n");
-}
-
-# Print resulting information
-print("targetbase=$base_major:$base_minor\n");
-print("targettype=".get_type_name($phy_type)."\n");
-if (defined($phy_geometry)) {
-	print("targetgeometry=$phy_geometry\n");
-}
-print("targetblocksize=$phy_blocksize\n");
-print("targetoffset=".($phy_offset / ($phy_blocksize / $SECTOR_SIZE))."\n");
-
-exit(0);
-
-# get_physical_device_from_dir(dir)
-# Returns (phy_major, phy_minor, phy_offset, @target_list).
-# target_list: [target_data1, target_data2, ..., target_datan]
-# target_data: [major, minor, target]
-sub get_physical_device_dir($)
-{
-	my ($directory) = @_;
-	my ($major, $minor) = get_major_minor($directory);
-
-	return get_physical_device($major, $minor);
-}
-
-# get_physical_device(major, minor)
-# Returns (phy_major, phy_minor, phy_offset, @target_list).
-# target_list: [target_data1, target_data2, ..., target_datan]
-# target_data: [major, minor, target]
-sub get_physical_device($$)
-{
-	my ($major, $minor) = @_;
-	my $table;
-	my $target;
-	my $start;
-	my $length;
-	my @target_list;
-
-	$table = get_table($major, $minor);
-	if (scalar(@$table) == 0) {
-		die("Error: Could not retrieve device-mapper information for ".
-		    "device '".get_device_name($major, $minor)."'\n");
-	}
-	# Filesystem must be on a single dm target
-	if (scalar(@$table) != 1) {
-		die("Error: Unsupported setup: Directory '$directory' is ".
-		    "located on a multi-target device-mapper device\n");
-	}
-
-	$target = $table->[0];
-	push(@target_list, [$major, $minor, $target]);
-	$start = $target->[$TARGET_START];
-	$length = $target->[$TARGET_LENGTH];
-	while (1) {
-		# Convert fs_start to offset on parent dm device
-		$start += get_target_start($target);
-		($major, $minor) = get_target_major_minor($target);
-		$table = get_table($major, $minor);
-		if (scalar(@$table) == 0) {
-			# Found non-dm device
-			return ($major, $minor, $start, @target_list);
-		}
-		# Get target in parent table which contains filesystem
-		$table = filter_table($table, $start, $length);
-		if (scalar(@$table) != 1) {
-			die("Error: Unsupported setup: Could not map ".
-			    "directory '$directory' to a single physical ".
-			    "device\n");
-		}
-		$target = $table->[0];
-		push(@target_list, [$major, $minor, $target]);
-		# Convert fs_start to offset on parent target
-		$start -= $target->[$TARGET_START];
-	}
-}
-
-# get_major_minor(filename)
-# Returns: (device major, device minor) of the device containing the
-# specified file.
-sub get_major_minor($)
-{
-	my ($filename) = @_;
-	my @stat;
-	my $dev;
-	my $major;
-	my $minor;
-
-	@stat = stat($filename);
-	if (!@stat) {
-		die("Error: Could not stat '$filename'\n");
-	}
-	$dev = $stat[0];
-	$major = ($dev & 0xfff00) >> 8;
-	$minor = ($dev & 0xff) | (($dev >> 12) & 0xfff00);
-
-	return ($major, $minor);
-}
-
-# get_table(major, minor)
-# Returns: [target1, target2, ..., targetn]
-# target: [start, length, type, data]
-# data: linear_data|mirror_data|multipath_data
-sub get_table($$)
-{
-	my ($major, $minor) = @_;
-	my @table;
-	my $dev_name = get_device_name($major, $minor);
-	local *HANDLE;
-
-	open(HANDLE, "$dmsetup table -j $major -m $minor 2>/dev/null|") or
-		return undef;
-	while (<HANDLE>) {
-		if (!(/^(\d+)\s+(\d+)\s+(\S+)\s+(\S.*)$/)) {
-			die("Error: Unrecognized device-mapper table format ".
-			    "for device '$dev_name'\n");
-		}
-		my ($start, $length, $target_type, $args) = ($1, $2, $3, $4);
-		my $data;
-		my $type;
-
-		if ($target_type eq "linear") {
-			$type = $TARGET_TYPE_LINEAR;
-			$data = get_linear_data($dev_name, $args);
-		} elsif ($target_type eq "mirror") {
-			$type = $TARGET_TYPE_MIRROR;
-			$data = get_mirror_data($dev_name, $args);
-		} elsif ($target_type eq "multipath") {
-			$type = $TARGET_TYPE_MULTIPATH;
-			$data = get_multipath_data($dev_name, $args);
-		} else {
-			die("Error: Unsupported setup: Unsupported ".
-			    "device-mapper target type '$target_type' for ".
-			    "device '$dev_name'\n");
-		}
-		push(@table, [$start, $length, $type, $data]);
-	}
-	close(HANDLE);
-	return \@table;
-}
-
-# get_linear_data(dev_name, args)
-# Returns: [major, minor, start_sector]
-sub get_linear_data($$)
-{
-	my ($dev_name, $args) = @_;
-
-	if (!($args =~ /^(\d+):(\d+)\s+(\d+)$/)) {
-		die("Error: Unrecognized device-mapper table format for ".
-		    "device '$dev_name'\n");
-	}
-	return [$1, $2, $3];
-}
-
-# get_mirror_data(dev_name, args)
-# Returns [[major1, minor1, start_sector1], [major2, minor2, start_sector2], ..]
-sub get_mirror_data($$)
-{
-	my ($dev_name, $args) = @_;
-	my @argv = split(/\s+/, $args);
-	my @data;
-	my $offset;
-	my $num;
-
-	# Remove log_type + #logargs + logargs
-	splice(@argv, 0, $argv[1] + 2);
-	if (!@argv) {
-		goto out_error;
-	}
-	$num = shift(@argv);
-	while ($num-- > 0) {
-		if (!($argv[0] =~ /^(\d+):(\d+)$/)) {
-			goto out_error;
-		}
-		push(@data, [$1, $2, $argv[1]]);
-		if (!defined($offset)) {
-			$offset = $argv[1];
-		} elsif ($argv[1] != $offset) {
-			die("Error: Unsupported setup: Mirror target on ".
-			    "device '$dev_name' contains entries with varying ".
-			    "sector offsets\n");
-		}
-		splice(@argv, 0, 2);
-	}
-	if (!scalar(@data)) {
-		goto out_error;
-	}
-	return \@data;
-
-out_error:
-	die("Error: Unrecognized device-mapper table format for device ".
-	    "'$dev_name'\n");
-}
-
-# get_multipath_status(device)
-# Return map of nodes to F/A flags (i.e. $map{$node} is either "A" or "F").
-# See linux/drivers/md/dm-mpath.c:multipath_status for details.
-sub get_multipath_status($)
-{
-	my $dev = shift();
-	my %map;
-	my $str;
-	my $failed = 0;
-
-	open(my $fh, "$dmsetup status /dev/$dev 2>/dev/null|") or return undef;
-	while ($str = <$fh>) {
-		# sample output (single line):
-		# 0 67108864 multipath \
-		# 	2 0 0 \
-		#	0 \
-		#	2 2 \
-		#		E 0 \
-		#		2 2 \
-		#			8:16 F 1 \
-		#				0 1 \
-		#			8:0 F 1 \
-		#				0 1 \
-		#		A 0 \
-		#		2 2 \
-		#			8:32 A 0 \
-		#				0 1 \
-		#			8:48 A 0 \
-		#				0 1
-		my @line = split(/\s+/, $str);
-		next if !@line;
-
-		my ($start, $length, $type) = splice(@line, 0, 3);
-		next if $type ne "multipath";
-
-		my $cnt = shift(@line); # Remove #multipath_feature_args +
-		splice(@line, 0, $cnt) if $cnt > 0; # multipath_feature_args
-
-		$cnt = shift(@line); # Remove #handler_status_args +
-		splice(@line, 0, $cnt) if $cnt > 0; # handler_status_args
-
-		# num_groups init_group_number ...
-		my ($ngr, $ign) = splice(@line, 0, 2);
-		for (my $g = 0; $g < $ngr; $g++) {
-			# Remove group_state + #ps_status_args
-			# group_state: D(isabled), A(ctive), or E(nabled)
-			my ($state, $cnt) = splice(@line, 0, 2);
-			# Remove ps_status_args*
-			splice(@line, 0, $cnt) if $cnt > 0;
-			# Remove #paths + #selector_args
-			my ($paths, $nsa) = splice(@line, 0, 2);
-			for (my $p = 0; $p < $paths; $p++) {
-				# Fetch single path description
-				my ($node, $active, $fail_cnt)
-					= splice(@line, 0, 3);
-				# active: A(ctive) or F(ailed)
-				$map{$node} = $active;
-				$failed++ if $active ne "A";
-				# Remove selector_args*
-				splice(@line, 0, $nsa) if $nsa > 0;
-			}
-		}
-	}
-	close($fh);
-
-	die ("Error: No paths found for '$dev'\n") if scalar(keys %map) == 0;
-	if ($failed) {
-		die ("Error: All paths for '$dev' failed\n")
-			if $failed == scalar(keys %map);
-
-		print(STDERR "Warning: There are one or more failed paths for"
-			." device '$dev'\n");
-	}
-	return \%map;
-}
-
-# get_multipath_data(dev_name, args)
-# Returns [[major1, minor1], [major2, minor2], ..]
-sub get_multipath_data($$)
-{
-	my ($dev_name, $args) = @_;
-	my $status = get_multipath_status($dev_name);
-	my @argv = split(/\s+/, $args);
-	my @data;
-
-	# Remove #features + features
-	splice(@argv, 0, $argv[0] + 1);
-	if (!@argv) {
-		goto out_error;
-	}
-	# Remove #handlerargs + handlerargs
-	splice(@argv, 0, $argv[0] + 1);
-	if (!@argv) {
-		goto out_error;
-	}
-	# Remove #pathgroups + pathgroup
-	splice(@argv, 0, 2);
-	while (@argv) {
-		# Remove pathselector + #selectorargs + selectorargs
-		splice(@argv, 0, 2 + $argv[1]);
-		if (!@argv) {
-			goto out_error;
-		}
-		my $num_paths = $argv[0];
-		my $num_path_args = $argv[1];
-		# Remove #paths + #pathargs
-		splice(@argv, 0, 2);
-		while ($num_paths-- > 0) {
-			if (!@argv) {
-				goto out_error;
-			}
-			if (!($argv[0] =~ /(\d+):(\d+)/)) {
-				goto out_error;
-			}
-			push(@data, [$1, $2]) if $status->{$argv[0]} eq "A";
-			# Remove device + deviceargs
-			splice(@argv, 0, 1 + $num_path_args);
-		}
-	}
-	if (!@data) {
-		goto out_error;
-	}
-	return \@data;
-
-out_error:
-	die("Error: Unrecognized device-mapper table format for device ".
-	    "'$dev_name'\n");
-}
-
-# filter_table(table, start, length)
-# Returns table containing only targets between start and start + length - 1.
-sub filter_table($$$)
-{
-	my ($table, $start, $length) = @_;
-	my $end = $start + $length - 1;
-	my @result;
-	my $target;
-
-	foreach $target (@$table) {
-		my $target_start = $target->[$TARGET_START];
-		my $target_end = $target_start + $target->[$TARGET_LENGTH] - 1;
-
-		if (!(($target_end < $start) || ($target_start > $end))) {
-			push(@result, $target);
-		}
-	}
-	return \@result;
-}
-
-# get_target_start(target)
-# Returns the start sector of target.
-sub get_target_start($)
-{
-	my ($target) = @_;
-	my $type = $target->[$TARGET_TYPE];
-	my $data = $target->[$TARGET_DATA];
-
-	if ($type == $TARGET_TYPE_LINEAR) {
-		return $data->[$LINEAR_START_SECTOR];
-	} elsif ($type == $TARGET_TYPE_MIRROR) {
-		my $mirror_data = $data->[0];
-		return $mirror_data->[$MIRROR_START_SECTOR];
-	} else {
-		return 0;
-	}
-}
-
-# get_target_major_minor(target)
-# Returns (major, minor) of target of target.
-sub get_target_major_minor($)
-{
-	my ($target) = @_;
-	my $type = $target->[$TARGET_TYPE];
-	my $data = $target->[$TARGET_DATA];
-	my $major;
-	my $minor;
-
-	if ($type == $TARGET_TYPE_LINEAR) {
-		$major = $data->[$LINEAR_MAJOR];
-		$minor = $data->[$LINEAR_MINOR];
-	} elsif ($type == $TARGET_TYPE_MIRROR) {
-		# Use data of first device in list
-		my $mirror_data = $data->[0];
-		$major = $mirror_data->[$MIRROR_MAJOR];
-		$minor = $mirror_data->[$MIRROR_MINOR];
-	} elsif ($type == $TARGET_TYPE_MULTIPATH) {
-		# Use data of first device in list
-		my $multipath_data = $data->[0];
-		$major = $multipath_data->[$MULTIPATH_MAJOR];
-		$minor = $multipath_data->[$MULTIPATH_MINOR];
-	}
-	return ($major, $minor);
-}
-
-# create_temp_device_node(type, major, minor)
-# Returns the name of a temporary device node.
-sub create_temp_device_node($$$)
-{
-	my ($type, $major, $minor) = @_;
-	my $path = "/dev";
-	my $name;
-	my $num;
-
-	for ($num = 0; $num < 100; $num++) {
-		$name = sprintf("$path/zipl-dm-temp-%02d", $num);
-		if (-e $name) {
-			next;
-		}
-		if (system("$mknod $name $type $major $minor --mode 0600 ".
-			   "2>/dev/null")) {
-			next;
-		}
-		return $name;
-	}
-	die("Error: Could not create temporary device node in '$path'\n");
-}
-
-# get_blocksize(device)
-# # Return blocksize in bytes for device.
-sub get_blocksize($)
-{
-	my ($dev) = @_;
-	my $blocksize;
-	local *HANDLE;
-
-	open(HANDLE, "$blockdev --getss $dev 2>/dev/null|") or
-		return undef;
-	$blocksize = <HANDLE>;
-	chomp($blocksize);
-	close(HANDLE);
-
-	return $blocksize;
-}
-
-# get_dasd_info(device)
-# Returns (type, cylinders, heads, sectors)
-sub get_dasd_info($)
-{
-	my ($dev) = @_;
-	my $disk_type;
-	my $format;
-	my $cyl;
-	my $heads;
-	my $sectors;
-	my $type;
-	local *HANDLE;
-
-	open(HANDLE, "$dasdview -x $dev 2>/dev/null|") or
-		# dasdview returned with an error
-		return undef;
-	while (<HANDLE>) {
-		if (/^number of cylinders.*\s(\d+)\s*$/) {
-			$cyl = $1;
-		} elsif (/^tracks per cylinder.*\s(\d+)\s*$/) {
-			$heads = $1;
-		} elsif (/^blocks per track.*\s(\d+)\s*$/) {
-			$sectors = $1;
-		} elsif (/^type\s+:\s+(\S+)\s*$/) {
-			$disk_type = $1;
-		} elsif (/^format.*\s+dec\s(\d+)\s/) {
-			$format = $1;
-		}
-	}
-	close(HANDLE);
-	if (!defined($cyl) || !defined($heads) || !defined($sectors) ||
-	    !defined($disk_type) || !defined($format)) {
-		# Unrecognized dadsview output format
-		return undef;
-	}
-	if ($disk_type eq "FBA") {
-		$type = $DEV_TYPE_FBA;
-	} elsif ($disk_type eq "ECKD") {
-		if ($format == 1) {
-			$type = $DEV_TYPE_LDL;
-		} elsif ($format == 2) {
-			$type = $DEV_TYPE_CDL;
-		}
-	}
-
-	return ($type, $cyl, $heads, $sectors);
-}
-
-# get_partition_start(major, minor)
-# Return the partition offset of device.
-sub get_partition_start($$)
-{
-	my ($major, $minor) = @_;
-	my $dir = "/sys/dev/block/$major:$minor";
-	my $offset;
-	local *HANDLE;
-
-	return undef if (!-d $dir);
-
-	open(HANDLE, "<", "$dir/start") or return 0;
-	$offset = <HANDLE>;
-	close(HANDLE);
-
-	chomp($offset);
-
-	return $offset;
-}
-
-# is_dasd(type)
-# Return whether disk with type is a DASD.
-sub is_dasd($)
-{
-	my ($type) = @_;
-
-	return ($type == $DEV_TYPE_CDL) || ($type == $DEV_TYPE_LDL) ||
-	       ($type == $DEV_TYPE_FBA);
-}
-
-# get_partition_base(type, major, minor)
-# Return (major, minor) of the base device on which the partition is located.
-sub get_partition_base($$$)
-{
-	my ($type, $major, $minor) = @_;
-
-	if (is_dasd($type)) {
-		return ($major, $minor & ~$DASD_PARTN_MASK);
-	} else {
-		return ($major, $minor & ~$SCSI_PARTN_MASK);
-	}
-}
-
-# get_device_characteristics(major, minor)
-# Returns (type, blocksize, geometry, bootsectors, partstart) for device.
-sub get_device_characteristics($$)
-{
-	my ($major, $minor) = @_;
-	my $dev;
-	my $blocksize;
-	my $type;
-	my $cyl;
-	my $heads;
-	my $sectors;
-	my $geometry;
-	my $bootsectors;
-	my $partstart;
-
-	$dev = create_temp_device_node("b", $major, $minor);
-	$blocksize = get_blocksize($dev);
-	if (!defined($blocksize)) {
-		unlink($dev);
-		die("Error: Could not get block size for ".
-		    get_device_name($major, $minor)."\n");
-	}
-	($type, $cyl, $heads, $sectors) = get_dasd_info($dev);
-	if (defined($type)) {
-		$geometry = "$cyl,$heads,$sectors";
-		if ($type == $DEV_TYPE_CDL) {
-			# First track contains IPL records
-			$bootsectors = $blocksize * $sectors / $SECTOR_SIZE;
-		} elsif ($type == $DEV_TYPE_LDL) {
-			# First two blocks contain IPL records
-			$bootsectors = $blocksize * 2 / $SECTOR_SIZE;
-		} elsif ($type == $DEV_TYPE_FBA) {
-			# First block contains IPL records
-			$bootsectors = $blocksize / $SECTOR_SIZE;
-		}
-	} else {
-		# Assume SCSI if get_dasd_info failed
-		$type = $DEV_TYPE_SCSI;
-		# First block contains IPL records
-		$bootsectors = $blocksize / $SECTOR_SIZE;
-	}
-	$partstart = get_partition_start($major, $minor);
-	unlink($dev);
-	if (!defined($partstart)) {
-		die("Error: Could not determine partition start for ".
-		    get_device_name($major, $minor)."\n");
-	}
-	# Convert partition start in sectors to blocks
-	$partstart = $partstart / ($blocksize / $SECTOR_SIZE);
-	return ($type, $blocksize, $geometry, $bootsectors, $partstart);
-}
-
-# get_type_name(type)
-# Return textual representation of device type.
-sub get_type_name($)
-{
-	my ($type) = @_;
-
-	if ($type == $DEV_TYPE_CDL) {
-		return "CDL";
-	} elsif ($type == $DEV_TYPE_LDL) {
-		return "LDL";
-	} elsif ($type == $DEV_TYPE_FBA) {
-		return "FBA";
-	} elsif ($type == $DEV_TYPE_SCSI) {
-		return "SCSI";
-	}
-	return undef;
-}
-
-
-# check_for_mirror(index, target_list)
-# Die if there is a mirror target between index and 0.
-sub check_for_mirror($@)
-{
-	my ($i, @target_list) = @_;
-
-	for (;$i >= 0; $i--) {
-		my $entry = $target_list[$i];
-		my ($major, $minor, $target) = @$entry;
-
-		if ($target->[$TARGET_TYPE] == $TARGET_TYPE_MIRROR) {
-			# IPL records are not mirrored.
-			die("Error: Unsupported setup: Block 0 is not ".
-			    "mirrored in device '".
-			    get_device_name($major, $minor)."'\n");
-		}
-	}
-}
-
-# get_target_base(bottom_major, bottom_minor, start, length, target_list)
-# Return (major, minor) for the top most target in the target list that maps
-# the region on (bottom_major, bottom_minor) defined by start and length at
-# offset 0.
-sub get_target_base($$$$@)
-{
-	my ($bot_major, $bot_minor, $start, $length, @target_list) = @_;
-	my $entry;
-	my $top_major;
-	my $top_minor;
-	my $i;
-
-	# Pre-initialize with bottom major-minor
-	$top_major = $bot_major;
-	$top_minor = $bot_minor;
-	# Process all entries starting with the last one
-	for ($i = scalar(@target_list) - 1; $i >= 0; $i--) {
-		my $entry = $target_list[$i];
-		my ($major, $minor, $target) = @$entry;
-
-		if (($target->[$TARGET_START] != 0) ||
-		    (get_target_start($target) != 0) ||
-		    ($target->[$TARGET_LENGTH] < $length)) {
-			last;
-		}
-		$top_major = $major;
-		$top_minor = $minor;
-	}
-	# Check for mirrorring between base device and fs device.
-	check_for_mirror($i, @target_list);
-	return ($top_major, $top_minor);
-}
-
-# get_device_name(major, minor)
-# Return the name of the device specified by major and minor.
-sub get_device_name($$)
-{
-	my ($major, $minor) = @_;
-	my $name;
-	local *HANDLE;
-
-	$name = "$major:$minor";
-	open(HANDLE, "</proc/partitions") or goto out;
-	while (<HANDLE>) {
-		if (/^\s*(\d+)\s+(\d+)\s+\d+\s+(\S+)\s*$/) {
-			if (($major == $1) && ($minor == $2)) {
-				$name = $3;
-				last;
-			}
-		}
-	}
-	close(HANDLE);
-out:
-	return $name;
-}
-
-sub check_tools()
-{
-system("$dmsetup --version &> /dev/null") >> 8 != 127
-    or die("Error: dmsetup not found\n");
-system("$mknod --version &> /dev/null") >> 8 != 127
-    or die("Error: mknod not found\n");
-system("$dasdview --version &> /dev/null") >> 8 != 127
-    or die("Error: dasdview not found\n");
-system("$blockdev --version &> /dev/null") >> 8 != 127
-    or die("Error: blockdev not found\n");
-
-return 0;
-}
diff --git a/zipl/src/zipl_helper.device-mapper.c b/zipl/src/zipl_helper.device-mapper.c
new file mode 100644
index 000000000..3cbcb7c01
--- /dev/null
+++ b/zipl/src/zipl_helper.device-mapper.c
@@ -0,0 +1,1121 @@
+/*
+ *
+ * zipl_helper.device-mapper: print zipl parameters for a device-mapper device
+ *
+ * Copyright IBM Corp. 2009, 2017
+ *
+ * s390-tools is free software; you can redistribute it and/or modify
+ * it under the terms of the MIT license. See LICENSE for details.
+ *
+ * Depending on the name by which the script is called, it serves one of two
+ * purposes:
+ *
+ * 1. Usage: zipl_helper.device-mapper <target directory> or
+ *                                     <major:minor of target device>
+ *
+ * This tool attempts to obtain zipl parameters for a target directory or
+ * partition located on a device-mapper device. It assumes that the
+ * device-mapper table for this device conforms to the following rules:
+ * - directory is located on a device consisting of a single device-mapper
+ *   target
+ * - only linear, mirror and multipath targets are supported
+ * - supported physical device types are DASD and SCSI devices
+ * - all of the device which contains the directory must be located on a single
+ *   physical device (which may be mirrored or accessed through a multipath
+ *   target)
+ * - any mirror in the device-mapper setup must include block 0 of the
+ *   physical device
+ *
+ * 2. Usage: chreipl_helper.device-mapper <major:minor of target device>
+ *
+ * This tool identifies the physical device which contains the specified
+ * device-mapper target devices. If the physical device was found, its
+ * major:minor parameters are printed. Otherwise, the script exits with an
+ * error message and a non-zero return code.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <err.h>
+#include <errno.h>
+#include <locale.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdbool.h>
+#include <limits.h>
+#include <linux/limits.h>
+#include <sys/sysmacros.h>
+#include <sys/ioctl.h>
+
+#include "lib/util_base.h"
+#include "lib/util_list.h"
+#include "lib/util_libc.h"
+#include "lib/util_file.h"
+#include "lib/dasd_sys.h"
+
+struct target_status {
+	char *path;
+	char status;
+	struct util_list_node list;
+};
+
+struct target_data {
+	dev_t device;
+	unsigned long start;
+	struct util_list_node list;
+};
+
+struct target {
+	unsigned long start;
+	unsigned long length;
+	unsigned short type;
+	struct util_list *data;
+	struct util_list_node list;
+};
+
+struct target_entry {
+	dev_t device;
+	struct target *target;
+	struct util_list_node list;
+};
+
+struct physical_device {
+	dev_t device;
+	unsigned long offset;
+	struct util_list *target_list;
+};
+
+struct device_characteristics {
+	unsigned short type;
+	int blocksize;
+	struct {
+		unsigned long cylinders;
+		unsigned long heads;
+		unsigned long sectors;
+	} geometry;
+	unsigned long bootsectors;
+	unsigned long partstart;
+};
+
+/* From include/linux/fs.h */
+#define BDEVNAME_SIZE 32
+
+#define PARTITIONS_FILE "/proc/partitions"
+
+/* Constants */
+const unsigned int SECTOR_SIZE = 512;
+const unsigned int DASD_PARTN_MASK = 0x03;
+const unsigned int SCSI_PARTN_MASK = 0x0f;
+
+const char CHREIPL_HELPER[] = "chreipl_helper.device-mapper";
+
+/* Internal constants */
+enum dev_type {
+	DEV_TYPE_CDL = 0,
+	DEV_TYPE_LDL,
+	DEV_TYPE_FBA,
+	DEV_TYPE_SCSI
+};
+
+enum target_type {
+	TARGET_TYPE_LINEAR = 0,
+	TARGET_TYPE_MIRROR,
+	TARGET_TYPE_MULTIPATH
+};
+
+
+static void
+get_type_name(char *name, unsigned short type)
+{
+	switch (type) {
+	case DEV_TYPE_SCSI:
+		strcpy(name, "SCSI");
+		break;
+	case DEV_TYPE_CDL:
+		strcpy(name, "CDL");
+		break;
+	case DEV_TYPE_FBA:
+		strcpy(name, "FBA");
+		break;
+	case DEV_TYPE_LDL:
+		strcpy(name, "LDL");
+		break;
+	default:
+		warnx("Unrecognized dev type %d", type);
+	}
+}
+
+
+static FILE *
+execute_command_and_get_output_stream(const char *fmt, ...)
+{
+	char *cmd;
+	va_list ap;
+	FILE *stream;
+
+	va_start(ap, fmt);
+	util_vasprintf(&cmd, fmt, ap);
+	va_end(ap);
+
+	stream = popen(cmd, "r");
+	if (stream == NULL)
+		warnx("'%s' failed", cmd);
+
+	free(cmd);
+	return stream;
+}
+
+
+static inline struct target_data *
+target_data_new(unsigned int maj, unsigned int min, unsigned int start)
+{
+	struct target_data *td = util_malloc(sizeof(struct target_data));
+
+	td->device = makedev(maj, min);
+	td->start = start;
+
+	return td;
+}
+
+static inline void
+target_data_free(struct target_data *td)
+{
+	free(td);
+}
+
+static void
+target_data_list_free(struct util_list *data)
+{
+	struct target_data *td, *n;
+
+	util_list_iterate_safe(data, td, n) {
+		util_list_remove(data, td);
+		target_data_free(td);
+	}
+	util_list_free(data);
+}
+
+static inline struct target *
+target_new(unsigned long start, unsigned long length, unsigned short type,
+		struct util_list *data)
+{
+	struct target *entry = util_malloc(sizeof(struct target));
+
+	entry->start = start;
+	entry->length = length;
+	entry->type = type;
+	entry->data = data;
+
+	return entry;
+}
+
+static void
+target_free(struct target *target)
+{
+	struct target_data *e, *n;
+
+	util_list_iterate_safe(target->data, e, n) {
+		util_list_remove(target->data, e);
+		target_data_free(e);
+	}
+	util_list_free(target->data);
+	free(target);
+}
+
+static inline unsigned long
+target_get_start(struct target *t)
+{
+	struct target_data *td = util_list_start(t->data);
+
+	return td->start;
+}
+
+static inline void
+target_get_major_minor(struct target *t, unsigned int *maj, unsigned int *min)
+{
+	struct target_data *td = util_list_start(t->data);
+
+	*maj = major(td->device);
+	*min = minor(td->device);
+}
+
+static struct target_entry *
+target_entry_new(dev_t dev, struct target *t)
+{
+	struct target_entry *te = util_malloc(sizeof(struct target_entry));
+
+	te->device = dev;
+	te->target = t;
+
+	return te;
+}
+
+static inline void
+target_entry_free(struct target_entry *entry)
+{
+	target_free(entry->target);
+	free(entry);
+}
+
+static struct target_entry *
+target_list_get_first_by_type(struct util_list *target_list,
+		unsigned short type)
+{
+	struct target_entry *entry;
+
+	util_list_iterate(target_list, entry) {
+		if (entry->target->type == type)
+			return entry;
+	}
+	return NULL;
+}
+
+static void
+target_list_free(struct util_list *target_list)
+{
+	struct target_entry *entry, *n;
+
+	util_list_iterate_safe(target_list, entry, n) {
+		util_list_remove(target_list, entry);
+		target_entry_free(entry);
+	}
+	util_list_free(target_list);
+}
+
+
+static void
+get_device_name(char *devname, dev_t dev)
+{
+	FILE *fd = NULL;
+	char *line = NULL;
+	size_t len = 0;
+	ssize_t read;
+
+	sprintf(devname, "%u:%u", major(dev), minor(dev));
+
+	fd = fopen(PARTITIONS_FILE, "r");
+	if (fd == NULL)
+		return;
+
+	if (getline(&line, &len, fd) == -1) /* Ignore header */
+		goto out;
+	if (getline(&line, &len, fd) == -1) /* Ignore empty line */
+		goto out;
+
+	while ((read = getline(&line, &len, fd)) != -1) {
+		char buf[BDEVNAME_SIZE];
+		unsigned int mj, mn;
+
+		if (sscanf(line, "%d %d %*u %s", &mj, &mn, buf) < 3)
+			continue;
+		if (major(dev) == mj && minor(dev) == mn) {
+			strcpy(devname, buf);
+			break;
+		}
+	}
+
+out:
+	free(line);
+	fclose(fd);
+}
+
+
+static int
+get_blocksize(const char *device)
+{
+	int fd;
+	int size;
+
+	fd = open(device, O_RDONLY);
+	if (fd == -1)
+		return -1;
+
+	if (ioctl(fd, BLKSSZGET, &size) != 0) {
+		close(fd);
+		return -1;
+	}
+	close(fd);
+
+	return size;
+}
+
+
+static int
+create_temp_device_node(char *name, unsigned int major, unsigned int minor)
+{
+	int num;
+	const char path_base[] = "/dev";
+	char buf[PATH_MAX];
+
+	for (num = 0; num < 100; num++) {
+		snprintf(buf, sizeof(buf), "%s/zipl-dm-temp-%02d", path_base, num);
+		if (access(buf, F_OK) == 0)
+			continue;
+		if (mknod(buf, S_IFBLK, makedev(major, minor)) != 0)
+			continue;
+		strcpy(name, buf);
+		return 0;
+	}
+	warnx("Could not create temporary device node in '%s'", path_base);
+	return -1;
+}
+
+
+static int
+get_partition_start(unsigned int maj, unsigned int min)
+{
+	unsigned long val;
+
+	if (util_file_read_ul(&val, 10, "/sys/dev/block/%u:%u/start",
+			maj, min) != 0) {
+		return 0;
+	}
+	return val;
+}
+
+
+static int
+get_device_characteristics(struct device_characteristics *dc, dev_t dev)
+{
+	int res;
+	dasd_info_t info;
+
+	if (create_temp_device_node(info.device, major(dev), minor(dev)) != 0)
+		return -1;
+
+	res = dasd_get_info(&info);
+	if (res != 0) { // assume SCSI if dasdinfo failed
+		int blocksize = get_blocksize(info.device);
+
+		if (blocksize < 0) {
+			unlink(info.device);
+			warnx("Could not get block size for '%s'", info.device);
+			return -1;
+		}
+		dc->blocksize = blocksize;
+		dc->type = DEV_TYPE_SCSI;
+		// first block contains IPL records
+		dc->bootsectors = dc->blocksize / SECTOR_SIZE;
+	} else {
+		unsigned int sectors = info.geo.sectors;
+
+		dc->blocksize = info.blksize;
+		if (strcmp(info.dasd_info.type, "FBA") == 0) {
+			dc->type = DEV_TYPE_FBA;
+			dc->bootsectors = dc->blocksize / SECTOR_SIZE;
+		} else if (strcmp(info.dasd_info.type, "ECKD") == 0) {
+			if (info.dasd_info.format == 1) {
+				dc->type = DEV_TYPE_LDL;
+				dc->bootsectors = dc->blocksize * 2 / SECTOR_SIZE;
+			} else if (info.dasd_info.format == 2) {
+				dc->type = DEV_TYPE_CDL;
+				dc->bootsectors = dc->blocksize * sectors / SECTOR_SIZE;
+			}
+		}
+		dc->geometry.cylinders = info.hw_cylinders;
+		dc->geometry.heads = info.geo.heads;
+		dc->geometry.sectors = info.geo.sectors;
+	}
+	dc->partstart = get_partition_start(major(dev), minor(dev));
+	dc->partstart /= (dc->blocksize / SECTOR_SIZE);
+
+	unlink(info.device);
+	return 0;
+}
+
+
+static struct util_list *
+get_linear_data(const char *devname, char *args)
+{
+	struct util_list *data;
+	unsigned int maj, min, start;
+
+	if (sscanf(args, "%u:%u %u", &maj, &min, &start) < 3) {
+		warnx("Unrecognized device-mapper table format "
+				"for device '%s'", devname);
+		return NULL;
+	}
+
+	data = util_list_new(struct target_data, list);
+	util_list_add_tail(data, target_data_new(maj, min, start));
+
+	return data;
+}
+
+
+#define STR_TOKEN_OR_GOTO(string, tok, label)		\
+	do {											\
+		char *tp = strtok(string, " ");				\
+		if (tp == NULL) {							\
+			goto label;								\
+		}											\
+		tok = tp;									\
+	} while (0)
+
+#define NEXT_STR_TOKEN_OR_GOTO(tok, label)			\
+	STR_TOKEN_OR_GOTO(NULL, tok, label)
+
+#define INT_TOKEN_OR_GOTO(string, tok, label)		\
+	do {											\
+		char *tp = strtok(string, " ");				\
+		if (tp == NULL) {							\
+			goto label;								\
+		}											\
+		errno = 0;									\
+		tok = strtol(tp, NULL, 10);					\
+		if (((errno == ERANGE) &&					\
+			(tok == LONG_MIN || tok == LONG_MAX)) ||\
+			(errno != 0 && tok == 0)) {				\
+			goto label;								\
+		}											\
+	} while (0)
+
+#define NEXT_INT_TOKEN_OR_GOTO(tok, label)			\
+	INT_TOKEN_OR_GOTO(NULL, tok, label)
+
+#define SKIP_NEXT_TOKENS_OR_GOTO(count, label)		\
+	do {											\
+		for (; count > 0; count--) {				\
+			if (strtok(NULL, " ") == NULL) {		\
+				goto label;							\
+			}										\
+		}											\
+	} while (0)
+
+/*
+ * There is no kernel documentation for the mirror target. Parameters obtained
+ * from Linux sources: drivers/md/dm-log.c and drivers/md/dm-raid1.c
+ *
+ * <starting_sector> <length> mirror \
+ * <log_type> <#log_args> <log_arg1>...<log_argN> \
+ * <#devs> <device_name_1> <offset_1>...<device name N> <offset N> \
+ * <#features> <feature_1>...<feature_N>
+ */
+static struct util_list *
+get_mirror_data(const char *devname __attribute__((unused)), char *args)
+{
+	char *token;
+	long nlogs, ndevs, nfeats;
+	struct util_list *data = util_list_new(struct target_data, list);
+
+	STR_TOKEN_OR_GOTO(args, token, out); // log_type
+
+	NEXT_INT_TOKEN_OR_GOTO(nlogs, out); // #log_args
+	SKIP_NEXT_TOKENS_OR_GOTO(nlogs, out); // log_args*
+
+	NEXT_INT_TOKEN_OR_GOTO(ndevs, out);
+	for (; ndevs > 0; ndevs--) {
+		char *name;
+		long offset;
+		unsigned int maj, min;
+
+		NEXT_STR_TOKEN_OR_GOTO(name, out);
+		if (sscanf(name, "%u:%u", &maj, &min) < 2)
+			goto out;
+		NEXT_INT_TOKEN_OR_GOTO(offset, out);
+		util_list_add_tail(data, target_data_new(maj, min, offset));
+	}
+	NEXT_INT_TOKEN_OR_GOTO(nfeats, out);
+	SKIP_NEXT_TOKENS_OR_GOTO(nfeats, out);
+
+	return data;
+
+out:
+	target_data_list_free(data);
+	return NULL;
+}
+
+
+static struct target_status *
+target_status_new(const char *path, char status)
+{
+	struct target_status *ts = util_malloc(sizeof(struct target_status));
+
+	ts->path = util_strdup(path);
+	ts->status = status;
+
+	return ts;
+}
+
+static void
+target_status_free(struct target_status *ts)
+{
+	free(ts->path);
+	free(ts);
+}
+
+static void
+status_list_free(struct util_list *status)
+{
+	struct target_status *ts, *n;
+
+	util_list_iterate_safe(status, ts, n) {
+		util_list_remove(status, ts);
+		target_status_free(ts);
+	}
+	util_list_free(status);
+}
+
+static char
+status_list_get_status(struct util_list *status, const char *node)
+{
+	struct target_status *ts;
+
+	util_list_iterate(status, ts) {
+		if (strcmp(ts->path, node) == 0)
+			return ts->status;
+	}
+	return 'F';
+}
+
+static struct util_list *
+get_multipath_status(const char *devname)
+{
+	FILE *fp;
+	size_t n = 0;
+	int len, failed = 0;
+	char *line = NULL;
+	struct util_list *status;
+
+	fp = execute_command_and_get_output_stream(
+			"dmsetup status /dev/%s 2>/dev/null", devname);
+	if (fp == NULL) {
+		warnx("No paths found for '%s'", devname);
+		return NULL;
+	}
+
+	status = util_list_new(struct target_status, list);
+	while (getline(&line, &n, fp) != -1) {
+		long cnt, ngr, ign, length;
+		char *token = NULL;
+
+		/* sample output (single line):
+		 * 0 67108864 multipath \
+		 * 2 0 0 \
+		 * 0 \
+		 * 2 2 \
+		 *     E 0 \
+		 *     2 2 \
+		 *         8:16 F 1 \
+		 *				0 1 \
+		 *		   8:0 F 1 \
+		 *		       0 1 \
+		 *	   A 0 \
+		 *	   2 2 \
+		 *		   8:32 A 0 \
+		 *		        0 1 \
+		 *		   8:48 A 0 \
+		 *		        0 1
+		 */
+		STR_TOKEN_OR_GOTO(line, token, out);
+		NEXT_INT_TOKEN_OR_GOTO(length, out);
+		NEXT_STR_TOKEN_OR_GOTO(token, out); // dtype
+		if (strcmp(token, "multipath") != 0)
+			continue;
+		NEXT_INT_TOKEN_OR_GOTO(cnt, out); // #mp_feature_args
+		SKIP_NEXT_TOKENS_OR_GOTO(cnt, out); // mp_feature_args*
+		NEXT_INT_TOKEN_OR_GOTO(cnt, out); // #handler_status_args
+		SKIP_NEXT_TOKENS_OR_GOTO(cnt, out); // handler_status_args*
+
+		NEXT_INT_TOKEN_OR_GOTO(ngr, out);
+		NEXT_INT_TOKEN_OR_GOTO(ign, out);
+		for (; ngr > 0; ngr--) {
+			long npaths, nsa;
+
+			NEXT_STR_TOKEN_OR_GOTO(token, out);
+			NEXT_INT_TOKEN_OR_GOTO(cnt, out); // #ps_status_args
+			SKIP_NEXT_TOKENS_OR_GOTO(cnt, out); // ps_status_args*
+			NEXT_INT_TOKEN_OR_GOTO(npaths, out);
+			NEXT_INT_TOKEN_OR_GOTO(nsa, out);
+			for (; npaths > 0; npaths--) {
+				char *path, *active;
+
+				NEXT_STR_TOKEN_OR_GOTO(path, out);
+				NEXT_STR_TOKEN_OR_GOTO(active, out);
+				util_list_add_tail(status,
+						target_status_new(path, active[0]));
+				NEXT_INT_TOKEN_OR_GOTO(cnt, out);
+				failed += (*active != 'A');
+				SKIP_NEXT_TOKENS_OR_GOTO(nsa, out);
+			}
+		}
+	}
+
+	free(line);
+	pclose(fp);
+
+	len = util_list_len(status);
+	if (len == 0) {
+		warnx("No paths found for '%s'", devname);
+		goto out;
+	} else if (failed == len) {
+		warnx("All paths for '%s' failed", devname);
+		goto out;
+	} else if (failed > 0) {
+		warnx("There are one or more failed paths for "
+				"device '%s'", devname);
+	}
+
+	return status;
+
+out:
+	free(line);
+	pclose(fp);
+	status_list_free(status);
+	return NULL;
+}
+
+static struct util_list *
+get_multipath_data(const char *devname, char *args)
+{
+	char *token;
+	long cnt, pgroups;
+	struct util_list *data = util_list_new(struct target_data, list);
+	struct util_list *status = get_multipath_status(devname);
+
+	if (status == NULL)
+		goto out_status;
+
+	INT_TOKEN_OR_GOTO(args, cnt, out); // #feat
+	SKIP_NEXT_TOKENS_OR_GOTO(cnt, out); // feats*
+	NEXT_INT_TOKEN_OR_GOTO(cnt, out); // #handlers
+	SKIP_NEXT_TOKENS_OR_GOTO(cnt, out); // handlers*
+	NEXT_INT_TOKEN_OR_GOTO(pgroups, out);
+	NEXT_STR_TOKEN_OR_GOTO(token, out); // pathgroup
+	for (; pgroups > 0; pgroups--) {
+		long npaths;
+
+		NEXT_STR_TOKEN_OR_GOTO(token, out); //path_selector
+		NEXT_INT_TOKEN_OR_GOTO(cnt, out); // #selectorargs
+		SKIP_NEXT_TOKENS_OR_GOTO(cnt, out);
+		NEXT_INT_TOKEN_OR_GOTO(npaths, out);
+		NEXT_INT_TOKEN_OR_GOTO(cnt, out); // #np_args
+		for (; npaths > 0; npaths--) {
+			char *path;
+			unsigned int maj, min;
+
+			NEXT_STR_TOKEN_OR_GOTO(path, out);
+			if (sscanf(path, "%u:%u", &maj, &min) < 2)
+				goto out;
+			if (status_list_get_status(status, path) == 'A')
+				util_list_add_tail(data, target_data_new(maj, min, 0));
+			SKIP_NEXT_TOKENS_OR_GOTO(cnt, out);
+		}
+	}
+
+	status_list_free(status);
+	return data;
+
+out:
+	status_list_free(status);
+out_status:
+	target_data_list_free(data);
+	return NULL;
+}
+
+
+static void
+table_free(struct util_list *table)
+{
+	struct target *t, *n;
+
+	util_list_iterate_safe(table, t, n) {
+		util_list_remove(table, t);
+		target_free(t);
+	}
+	util_list_free(table);
+}
+
+static void
+filter_table(struct util_list *table, unsigned int start, unsigned int length)
+{
+	struct target *target, *n;
+
+	util_list_iterate_safe(table, target, n) {
+		if (!(((target->start + target->length - 1) >= start) &&
+				(target->start <= (start + length - 1)))) {
+			util_list_remove(table, target);
+			target_free(target);
+		}
+	}
+}
+
+/*
+ * Returns list of target devices
+ */
+static struct util_list *
+get_table(dev_t dev)
+{
+	FILE *fp;
+	size_t n = 0;
+	char *line = NULL;
+	char devname[BDEVNAME_SIZE];
+	struct util_list *table;
+
+	table = util_list_new(struct target, list);
+	if (table == NULL)
+		return NULL;
+
+	fp = execute_command_and_get_output_stream(
+			"dmsetup table -j %u -m %u 2>/dev/null", major(dev), minor(dev));
+	if (fp == NULL)
+		return table;
+
+	get_device_name(devname, dev);
+	while (getline(&line, &n, fp) != -1) {
+		unsigned long start, length;
+		unsigned short ttype;
+		char *type = NULL, *args = NULL;
+		struct util_list *data = NULL;
+
+		if (sscanf(line, "%lu %lu %ms %m[a-zA-Z0-9_: -]",
+					&start, &length, &type, &args) < 4) {
+			warnx("Unrecognized device-mapper table "
+					"format for device '%s'", devname);
+			goto out;
+		}
+
+		if (strcmp(type, "linear") == 0) {
+			data = get_linear_data(devname, args);
+			ttype = TARGET_TYPE_LINEAR;
+		} else if (strcmp(type, "mirror") == 0) {
+			data = get_mirror_data(devname, args);
+			ttype = TARGET_TYPE_MIRROR;
+		} else if (strcmp(type, "multipath") == 0) {
+			data = get_multipath_data(devname, args);
+			ttype = TARGET_TYPE_MULTIPATH;
+		} else {
+			warnx("Unsupported setup: Unsupported "
+					"device-mapper target type '%s' for device '%s'",
+					type, devname);
+		}
+		free(type);
+		free(args);
+		if (data == NULL)
+			goto out;
+		util_list_add_tail(table, target_new(start, length, ttype, data));
+	}
+
+	free(line);
+	pclose(fp);
+
+	return table;
+
+out:
+	free(line);
+	pclose(fp);
+	table_free(table);
+	return NULL;
+}
+
+
+static inline bool
+is_dasd(unsigned short type)
+{
+	return (type == DEV_TYPE_CDL) || (type == DEV_TYPE_LDL) ||
+		(type == DEV_TYPE_FBA);
+}
+
+
+static int
+get_physical_device(struct physical_device *pd, dev_t dev,
+		const char *directory)
+{
+	unsigned int start, length;
+	struct target *target;
+	struct util_list *table = NULL;
+	struct util_list *target_list = NULL;
+
+	table = get_table(dev);
+	if (table == NULL || util_list_start(table) == NULL) {
+		char devname[BDEVNAME_SIZE];
+
+		get_device_name(devname, dev);
+		warnx("Could not retrieve device-mapper information "
+				"for device '%s'", devname);
+		if (table != NULL)
+			table_free(table);
+		return -1;
+	}
+
+	target = util_list_start(table);
+
+	/* Filesystem must be on a single dm target */
+	if (util_list_next(table, target) != NULL) {
+		warnx("Unsupported setup: Directory '%s' is "
+				"located on a multi-target device-mapper device",
+				directory);
+		table_free(table);
+		return -1;
+	}
+	util_list_remove(table, target);
+	table_free(table);
+
+	target_list = util_list_new(struct target_entry, list);
+	util_list_add_head(target_list, target_entry_new(dev, target));
+	start = target->start;
+	length = target->length;
+	while (true) {
+		unsigned int mmaj, mmin;
+
+		/* convert fs_start to offset on parent dm device */
+		start += target_get_start(target);
+		target_get_major_minor(target, &mmaj, &mmin);
+		table = get_table(makedev(mmaj, mmin));
+		/* Found non-dm device */
+		if (table == NULL || util_list_start(table) == NULL) {
+			pd->device = makedev(mmaj, mmin);
+			pd->offset = start;
+			pd->target_list = target_list;
+			if (table != NULL)
+				table_free(table);
+			return 0;
+		}
+		/*
+		 * Get target in parent table which contains filesystem
+		 * We are interested only in targets between [start,start+length-1]
+		 */
+		filter_table(table, start, length);
+		target = util_list_start(table);
+		if (target == NULL || util_list_next(table, target) != NULL) {
+			warnx("Unsupported setup: Could not map  "
+					"directory '%s' to a single physical device",
+					directory);
+			table_free(table);
+			target_list_free(target_list);
+			return -1;
+		}
+		util_list_remove(table, target);
+		util_list_add_head(target_list,
+				target_entry_new(makedev(mmaj, mmin), target));
+		table_free(table);
+		/* Convert fs_start to offset on parent target */
+		start -= target->start;
+	}
+}
+
+
+static inline int
+get_major_minor(dev_t *dev, const char *filename)
+{
+	struct stat buf;
+
+	if (stat(filename, &buf) != 0) {
+		warnx("Could not stat '%s'", filename);
+		return -1;
+	}
+	*dev = buf.st_dev;
+	return 0;
+}
+
+static int
+get_physical_device_dir(struct physical_device *pd, const char *directory)
+{
+	dev_t dev;
+
+	if (get_major_minor(&dev, directory) != 0)
+		return -1;
+	return get_physical_device(pd, dev, directory);
+}
+
+
+static int
+get_target_base(dev_t *base, dev_t bottom, unsigned int length,
+		struct util_list *target_list)
+{
+	dev_t top = bottom;
+	struct target_entry *te, *mirror;
+
+	util_list_iterate(target_list, te) {
+		if ((te->target->start != 0) || (target_get_start(te->target) != 0) ||
+			(te->target->length < length)) {
+			break;
+		}
+		top = te->device;
+	}
+
+	/* Check for mirroring between base device and fs device */
+	for (mirror = te; mirror != NULL;
+			mirror = util_list_next(target_list, mirror)) {
+		if (mirror->target->type == TARGET_TYPE_MIRROR) {
+			char name[BDEVNAME_SIZE];
+
+			get_device_name(name, mirror->device);
+			warnx("Unsupported setup: Block 0 is not "
+					"mirrored in device '%s'", name);
+			return -1;
+		}
+	}
+
+	*base = top;
+	return 0;
+}
+
+
+static inline dev_t
+get_partition_base(unsigned short type, dev_t dev)
+{
+	return makedev(major(dev), minor(dev) &
+			(is_dasd(type) ? ~DASD_PARTN_MASK : ~SCSI_PARTN_MASK));
+}
+
+
+static int
+extract_major_minor_from_cmdline(int argc, char *argv[], unsigned int *maj,
+		unsigned int *min)
+{
+	int i;
+	char *cmdline = NULL;
+
+	for (i = 1; i < argc; i++)
+		cmdline = util_strcat_realloc(cmdline, argv[i]);
+
+	if (sscanf(cmdline, "%u:%u", maj, min) != 2) {
+		free(cmdline);
+		return -1;
+	}
+
+	free(cmdline);
+	return 0;
+}
+
+
+static inline bool
+toolname_is_chreipl_helper(const char *toolname)
+{
+	int tlen = strlen(toolname);
+	int clen = strlen(CHREIPL_HELPER);
+
+	if (tlen < clen)
+		return false;
+
+	return strcmp(toolname + tlen - clen, CHREIPL_HELPER) == 0;
+}
+
+
+void
+print_usage(const char *toolname)
+{
+	fprintf(stderr, "%s <major:minor of target device>", toolname);
+	if (!toolname_is_chreipl_helper(toolname))
+		fprintf(stderr, " or <target directory>");
+	fprintf(stderr, "\n");
+}
+
+
+int
+main(int argc, char *argv[])
+{
+	int res;
+	dev_t base;
+	unsigned int maj, min;
+	char type_name[8];
+	char *directory = NULL;
+	const char *toolname = argv[0];
+	struct physical_device pd;
+	struct device_characteristics dc = {0};
+
+	if (argc == 1)
+		goto usage;
+
+	if (setlocale(LC_ALL, "C") == NULL) {
+		errx(EXIT_FAILURE, "Could not use standard locale");
+	}
+
+	if (toolname_is_chreipl_helper(toolname)) {
+		if (extract_major_minor_from_cmdline(argc, argv, &maj, &min) != 0)
+			goto usage;
+		if (get_physical_device(&pd, makedev(maj, min), argv[1]) != 0)
+			exit(EXIT_FAILURE);
+		printf("%u:%u\n", major(pd.device), minor(pd.device));
+		target_list_free(pd.target_list);
+		exit(EXIT_SUCCESS);
+	}
+
+	directory = argv[1];
+	if (extract_major_minor_from_cmdline(argc, argv, &maj, &min) == 0)
+		res = get_physical_device(&pd, makedev(maj, min), directory);
+	else if (argc == 2)
+		res = get_physical_device_dir(&pd, directory);
+	else
+		goto usage;
+
+	if (res != 0)
+		exit(EXIT_FAILURE);
+
+	if (get_device_characteristics(&dc, pd.device) != 0)
+		goto error;
+
+	/* Handle partitions */
+	if (dc.partstart > 0) {
+		struct target_entry *mirror;
+		struct device_characteristics ndc = {0};
+
+		/* Only the partition of the physical device is mapped so only the
+		 * physical device can provide access to the boot record */
+		base = get_partition_base(dc.type, pd.device);
+		/* Check for mirror */
+		mirror = target_list_get_first_by_type(
+				pd.target_list, TARGET_TYPE_MIRROR);
+		if (mirror != NULL) {
+			char name[BDEVNAME_SIZE];
+
+			get_device_name(name, mirror->device);
+			// IPL records are not mirrored
+			warnx("Unsupported setup: Block 0 is not "
+					"mirrored in device '%s'", name);
+			goto error;
+		}
+		/* Adjust filesystem offset */
+		pd.offset += (dc.partstart * (dc.blocksize / SECTOR_SIZE));
+		dc.partstart = 0;
+		/* Update device geometry */
+		get_device_characteristics(&ndc, base);
+		dc.geometry = ndc.geometry;
+	} else {
+		/* All of the device is mapped, so the base device is the top most dm
+		 * device which provides access to boot sectors */
+		if (get_target_base(
+					&base, pd.device, dc.bootsectors, pd.target_list) != 0)
+			goto error;
+	}
+
+	/* Check for valid offset of filesystem */
+	if ((pd.offset % (dc.blocksize / SECTOR_SIZE)) != 0) {
+		warnx("File system not aligned on physical block size");
+		goto error;
+	}
+
+	target_list_free(pd.target_list);
+
+	/* Print resulting information */
+	printf("targetbase=%u:%u\n", major(base), minor(base));
+	get_type_name(type_name, dc.type);
+	printf("targettype=%s\n", type_name);
+	if (dc.geometry.cylinders != 0 &&
+		dc.geometry.heads != 0 &&
+		dc.geometry.sectors != 0) {
+		printf("targetgeometry=%lu,%lu,%lu\n",
+				dc.geometry.cylinders,
+				dc.geometry.heads,
+				dc.geometry.sectors);
+	}
+	printf("targetblocksize=%d\n", dc.blocksize);
+	printf("targetoffset=%lu\n", (pd.offset / (dc.blocksize / SECTOR_SIZE)));
+
+	exit(EXIT_SUCCESS);
+
+error:
+	if (pd.target_list != NULL)
+		target_list_free(pd.target_list);
+	exit(EXIT_FAILURE);
+
+usage:
+	print_usage(toolname);
+	exit(EXIT_FAILURE);
+}