How to Programming

Made for FRC Team 972: Iron Claw, in Los Gatos High School, CA.
Authored by @whackamadoodle3000, @me1234q , TsarF

Guides

Use Motors

Motors are one of the most common actuators and provide rotational motion. When given power, the motor will spin with speed proportional to the voltage and torque proportional to the current. They are controlled with a talon.

TalonFX motor controllers (falcon500 and kraken x60)

To import
- To import TalonFX import com.ctre.phoenix6.hardware.TalonFX;
To initialize
- To initialize motor TalonFX motor = new TalonFX(6);
To use
- Set motor absolute power motor.set(value); with value as double between -1 and 1
- Set motor to follow another motor.setControl(new Follower(id, opposeDirection)); with id as the id of the other talon. opposeDirection is a boolean indicating whether or not this motor should oppose the direction of the motor it follows
To use encoder
- Get position in rotations motor.getPosition().getValue();
- Get velocity (speed) in rotations per second motor.getVelocity().getValue();
- Set position motor.setPosition(value) where value is the new position in rotations

SparkMax/SparkFlex motor controllers

To import
- To import SparkMax import com.revrobotics.CANSparkMax;
- To import SparkFlex import com.revrobotics.CANSparkFlex;
- To import motor Types import com.revrobotics.CANSparkMaxLowLevel.MotorType;
To initialize
- To intialize SparkMax controller CANSparkMax <name> = new CANSparkMax(<MotorID>, <MotorType.kBrushless OR MotorType.kBrushed>);
- To intialize SparkFlex controller CANSparkFlex <name> = new CANSparkFlex(<MotorID>, <MotorType.kBrushless OR MotorType.kBrushed>);
  - There are multiple control modes for different motors because some motors are BRUSHED and some are BRUSHLESS you can tell if it is brushed or brushless by counting the wires going into the motor from the controller
    - 3 wires: Brushless
    - 2 wires: Brushed
    - NOTE Some motors, like NEO motors, have 3 wires AND what may look like a 4th wire, which is actually the encoder wire, inside the protective sleeve, there are 6 more wires. DO NOT BE CONFUSED BY THAT.
To use
- To RUN the motor motor.set(<speed 0.0 - 1.0>);
- Set Follower motor.follow(<motor to follow>) or motor.follow(<motor to follow>, <inverted? true:false>);
- Encoder motor.getEncoder();
  - Get velocity motor.getEncoder().getVelocity();
  - Get position motor.getEncoder().getPosotion();
  - SET position motor.getEncoder().setPosition(<position (double)>); //used for aeroid out the encoders, and resetting field position

Use Joysticks

Joysticks are (misleadingly) an umbrella term for all user input devices, including gamepads, joysticks, etc. Joystick objects can receive joystick and button input.

To import import edu.wpi.first.wpilibj.Joystick;
To initialize Joystick Joy = new Joystick(0);
To use
- To get axis values Joy.getRawAxis(0); with value between -1 and 1
- To get button values Joy.getRawButton(0); with boolean output
- To get angle in radians Math.atan2(xAxis, -yAxis)
  - To get angle in degrees Math.atan2(xAxis, -yAxis) * 180 / Math.PI
- To get magnitude Math.sqrt(xAxis*xAxis + yAxis*yAxis);
Documentation: http://first.wpi.edu/FRC/roborio/release/docs/java/edu/wpi/first/wpilibj/Joystick.html

Use External Encoders

Encoders are used for measuring rotation. This is done through counting the number of "clicks", which increments or decrements with every slight rotation.

To import import edu.wpi.first.wpilibj.Encoder
To initialize Encoder sampleEncoder = new Encoder(0, 1, false, Encoder.EncodingType.k4X);
- To set max period (secs) without clicks before it is considered at rest sampleEncoder.setMaxPeriod(.1);
- Minimum rate (rotation/time) before device is stopped sampleEncoder.setMinRate(10);
- How much distance is traveled every encoder pulse sampleEncoder.setDistancePerPulse(5);
- Reverse the direction encoder counts sampleEncoder.setReverseDirection(true);
- How many samples to take (1-127) when determining the periodsampleEncoder.setSamplesToAverage(7);
To use
- To get count of clicks int count = sampleEncoder.get();
- To get distance double distance = sampleEncoder.getDistance();
- To get period between clicks double period = sampleEncoder.getPeriod();
- To get speed double rate = sampleEncoder.getRate();
- To get current direction boolean direction = sampleEncoder.getDirection();
- To see if the encoder is stopped turning boolean stopped = sampleEncoder.getStopped();
Documentation: http://first.wpi.edu/FRC/roborio/release/docs/java/edu/wpi/first/wpilibj/Encoder.html
More info: https://wpilib.screenstepslive.com/s/currentCS/m/java/l/599717-encoders-measuring-rotation-of-a-wheel-or-other-shaft

Use the Built-in Accelerometer

This is the RoboRio's built-in accelerometer. It allows you to get the acceleration in the x, y, and z directions.

To import import edu.wpi.first.wpilibj.BuiltInAccelerometer;
To initialize BuiltInAccelerometer accel = new BuiltInAccelerometer();
To use
- Get x acceleration accel.getX()
- Get y acceleration accel.getY()
- Get z accelerationaccel.getZ()
Documentation: http://first.wpi.edu/FRC/roborio/release/docs/java/edu/wpi/first/wpilibj/BuiltInAccelerometer.html

Use the Kauai Labs NavX

The NavX gives a variety of information on the robot state, including orientation, velocity, acceleration, position, and more.

To import
- import com.kauailabs.navx.frc.AHRS;
- import edu.wpi.first.wpilibj.SPI; or I2C
To initialize
- If mounted on RoboRIO AHRS ahrs = new AHRS(SPI.Port.kMXP);
- If mounted elsewhere AHRS ahrs = new AHRS(I2C.Port.kMXP);
To use
- Orientation Data
  - To get heading ahrs.getAngle()
  - To get yaw ahrs.getYaw() (-180 to 180 degrees)
  - To get pitch ahrs.getPitch() (-180 to 180 degrees)
  - To get roll ahrs.getRoll()
  - To get compass data ahrs.getCompassHeading() (0 to 360)
- Velocity Data in Meters/Sec
  - Velocity in x direction ahrs.getVelocityX()
  - Velocity in y direction ahrs.getVelocityY()
  - Velocity in z direction ahrs.getVelocityZ()
  - Rate of yaw (turning) ahrs.getRate()
- Acceleration Data in g-force
  - Acceleration in x direction ahrs.getWorldLinearAccelX()
  - Acceleration in y direction ahrs.getWorldLinearAccelY()
  - Acceleration in z direction ahrs.getWorldLinearAccelZ()
- Distance/Displacement Data in meters
  - Displacement x ahrs.getDisplacementX()
  - Displacement y ahrs.getDisplacementY()
  - Displacement z ahrs.getDisplacementZ()
- Pressure and Temperature data
  - Barometric Pressure in millibars ahrs.getBarometricPressure()
  - Temperature in Celsius ahrs.getTempC()
- Boolean Motion Data
  - To see if it is rotating ahrs.isRotating()
  - To see if it is moving ahrs.isMoving()
- Reset
  - To reset measurements for the yaw gyro ahrs.reset()
  - To zero yaw gyro ahrs.zeroYaw() (tell it what forward mean)
  - To reset displatement distances ahrs.resetDisplacement()
- Board Info
  - To get update rate ahrs.getActualUpdateRate()
  - Check if it is connected ahrs.isConnected()
Documentation: https://www.kauailabs.com/public_files/navx-mxp/apidocs/java/com/kauailabs/navx/frc/AHRS.html

Use Single Acting Solenoids

Solenoids are the most often used actuator for linear motion. Single acting Solenoids extend by increasing the air pressure inside a piston. Double Solenoids are recommended, as their have two channels, allowing them to more easily switch between extended and retracted position.

To import import edu.wpi.first.wpilibj.Solenoid;
To initialize Solenoid solenoid = new Solenoid(1)
To use
- To turn on solenoid.set(true)
- To turn off solenoid.set(false)
- To get solenoid state in boolean solenoid.get()
Documentation: http://first.wpi.edu/FRC/roborio/release/docs/java/edu/wpi/first/wpilibj/Solenoid.html

Use a Double Solenoid

These are similar to single acting solenoids, but have a second channel allowing them to revert to their original position without the need of an external force.

To import import edu.wpi.first.wpilibj.DoubleSolenoid;
To initialize DoubleSolenoid doubleSolenoid = new DoubleSolenoid(forwardchannel, reversechannel);
To use
- To block all pressure doubleSolenoid.set(DoubleSolenoid.Value.kOff);
- To put pressure in forward channel doubleSolenoid.set(DoubleSolenoid.Value.kForward);
- To put pressure in reverse channel doubleSolenoid.set(DoubleSolenoid.Value.kReverse);
Documentation: http://first.wpi.edu/FRC/roborio/release/docs/java/edu/wpi/first/wpilibj/DoubleSolenoid.html

Use a Compressor

Compressors are used for compressing air. They are need for any pneumatics, as they need air at a high pressure to function.

To import import edu.wpi.first.wpilibj.Compressor;
To initialize Compressor c = new Compressor(40);
To control
- To toggle closed loop control (goes up until maximum PSI) c.setClosedLoopControl(boolean);
- To turn on c.start();
- To turn off c.stop();
Getting information
- To get if the pressure is low in boolean c.getPressureSwitchValue()
- To get the current being consumed in amps in double c.getCompressorCurrent()
- To check if closed loop control is on c.getClosedLoopControl()
Getting fault/error information
- Check if compressor is disabled because current is too high c.getCompressorCurrentTooHighFault()
- Check if the compressor is disabled because output is shorted c.getCompressorShortedFault()
- Check if compressor is is not connected/not drawing enough current c.getCompressorNotConnectedFault()
Documentation: http://first.wpi.edu/FRC/roborio/beta/docs/java/edu/wpi/first/wpilibj/Compressor.html

Use a Limit Switch

Limit switches are devices that mechanically prevent an actuator from extending a certain predetermined position.

To import import edu.wpi.first.wpilibj.DigitalInput;
To initialize DigitalInput limitSwitch = new DigitalInput(1);
To get value limitSwitch.get() (boolean)
Documentation: http://first.wpi.edu/FRC/roborio/beta/docs/java/edu/wpi/first/wpilibj/DigitalInput.html

Start Programming On Your Device

Install Git

Here you can Install Git Desktop or Git Bash, whichever one you prefer.

Download link: link
Run the installer
Make sure Add to PATH option is selected

Download and Install Java 11 SDK

Download the installer from this link
Run the installer, make sure Add to PATH option is selected
Thats it

Setting Up Computer Vision Development Environment

Python is usually used for computer vision stuff, it is very useful for automatic allignment

Download Python 3 from here: link
Run the Installer
Ensure the Add to PATH option is selected, otherwise it will not work
Ensure everything is installed correctly by running python or python3 in the command line
If an interactive python inveronment opens, you are good to go

Installing OpenCV package for python

Open the command line once again and run python -m pip install if that fails, then run py -m pip install
Wait for it to install, accept any warning/messages

Installing FRC VS Code

This IDE is different from the others as it has integrated WPI lib and vendor library manage for easier installation of new libraries for new devices.

You want to download the installer: link
Extract the files to any folder of you choise and run the installer file (.msi or .exe)
In the installer, make sure it is installing a NEW version of VS CODE
wait for the installation to finish

Setting up the IDE

Configure your settings as you wish
Configure the team number to 972

Installing CTRE Toolsuite (Optional)

This toolsuite is often used for configuring Driver Station dashboards, testing camera feed and configuring CAN devices

Get the installer zip file from here: link
Run the installer, it will install the following: Phoenix Tuner, Smart Dashboard

Installing the NI Toolsuite

This one comes with the Driver Station and RoboRIO Imaging Tool

Go to the following link
Click on the download link to download the latest update suite
Run the installers, login with the email: garyk@dslextreme.com and password: garyk

REV Robotics SparkMAX Client

This application is used for configuring SparkMAX motor controllers, updating their firmware and running motors for testing

Go to the download link
Run the installer

REV Robotics Libraries

Used for controlling the SparkMAX motors

In FRC VS CODE press ctrl + shift + p to open the terminal
Type in Manage Vendor Libraries
Give it this link: https://www.revrobotics.com/content/sw/max/sdk/REVRobotics.json
Press enter
Recompile to ensure library was installed correctly

NOTE: SOME OF THE INSTALLERS ARE DOWNLOADED AS `.zip` FILES WHICH YOU NEED TO EXTRACT TO INSTALL PROPERLY

Examples

Make Motor Spin based on Joystick Input　

package frc.robot;

import com.ctre.phoenix6.hardware.TalonFX;
import edu.wpi.first.wpilibj.TimedRobot;
import edu.wpi.first.wpilibj.Joystick;

public class Robot extends TimedRobot {
	TalonFX motor = new TalonFX(6); //initialize motor
	Joystick joy = new Joystick(0); //initialize joystick (to find number, check driver station)
	double powerMultiplier = 0.7; //scales down motor power

	public void robotInit() {
		//This function is run when the robot is first started up
	}

	public void teleopPeriodic() {
		//This function is called periodically during teleoperated control
		double joystickValue = joy.getRawAxis(1); //find axis number in driver station
		motor.set(joystickValue*powerMultiplier); //scale down by powerMultiplier
	}
}

Arcade Drive　

package frc.robot;

import com.ctre.phoenix6.controls.Follower;
import com.ctre.phoenix6.hardware.TalonFX;
import edu.wpi.first.wpilibj.TimedRobot;
import edu.wpi.first.wpilibj.Joystick;

public class Robot extends TimedRobot {

	/* talons for arcade drive */
	TalonFX _frontLeftMotor = new TalonFX(6);
	TalonFX _frontRightMotor = new TalonFX(2);

	/* extra talons for four motor drives */
	TalonFX _leftSlave = new TalonFX(5);
	TalonFX _rightSlave = new TalonFX(4);

	Joystick _joy = new Joystick(0);

	/**
	 * This function is run when the robot is first started up and should be
	 * used for any initialization code.
	 */
	public void robotInit() {
		/*
		 * take our extra talons and just have them follow the Talons updated in
		 * arcadeDrive
		 */
		_leftSlave.setControl(new Follower(_frontLeftMotor.getDeviceID(), false));
		_rightSlave.follow(new Follower(_frontRightMotor.getDeviceID(), false));

		/* drive robot forward and make sure all 
		 * motors spin the correct way.
		 * Toggle booleans accordingly 
		 * Also toggle booleans above for followers*/
		_frontLeftMotor.setInverted(false);
		
		_frontRightMotor.setInverted(false);
	}

	/**
	 * This function is called periodically during operator control
	 */
	public void teleopPeriodic() {
		double forward = -1.0 * _joy.getY();
		/* sign this so right is positive. */
		double turn = +1.0 * _joy.getZ();
		/* deadband */
		if (Math.abs(forward) < 0.10) {
			/* within 10% joystick, make it zero */
			forward = 0;
		}
		if (Math.abs(turn) < 0.10) {
			/* within 10% joystick, make it zero */
			turn = 0;
		}
		_frontLeftMotor.set(forward + turn);
		_frontRightMotor.set(forward - turn);
	}
}

Tank Drive　

package frc.robot;

import com.ctre.phoenix6.controls.Follower;
import com.ctre.phoenix6.hardware.TalonFX;
import edu.wpi.first.wpilibj.TimedRobot;
import edu.wpi.first.wpilibj.Joystick;

public class Robot extends TimedRobot {

	/* talons for arcade drive */
	TalonFX _frontLeftMotor = new TalonFX(6);
	TalonFX _frontRightMotor = new TalonFX(2);

	/* extra talons for four motor drives */
	TalonFX _leftSlave = new TalonFX(5);
	TalonFX _rightSlave = new TalonFX(4);

	Joystick _joy = new Joystick(0);

	/**
	 * This function is run when the robot is first started up and should be
	 * used for any initialization code.
	 */
	public void robotInit() {
		/*
		 * take our extra talons and just have them follow the Talons updated in
		 * arcadeDrive
		 */
		_leftSlave.setControl(new Follower(_frontLeftMotor.getDeviceID(), false));
		_rightSlave.follow(new Follower(_frontRightMotor.getDeviceID(), false));

		/* drive robot forward and make sure all 
		 * motors spin the correct way.
		 * Toggle booleans accordingly 
		 * Also toggle booleans above for followers*/
		_frontLeftMotor.setInverted(false);
		
		_frontRightMotor.setInverted(false);
	}

	/**
	 * This function is called periodically during operator control
	 */
	public void teleopPeriodic() {
		double right = -rightJoy.getY();
		double left =  -leftjoy.getY();
		/* deadband */
		if (Math.abs(left) < 0.10) {
			/* within 10% joystick, make it zero */
			left = 0;
		}
		if (Math.abs(right) < 0.10) {
			/* within 10% joystick, make it zero */
			right = 0;
		}
		_frontLeftMotor.set(left);
		_frontRightMotor.set(right);
	}
}

PID Example Snippet

// This is included as a simplified version of how WPI's PIDController works. You should use that instead of this.


double proportionFactor = 0.1; //These values should be tuned to be the most efficient.
double integralFactor = 0;
double derivativeFactor = 0.05;
double marginOfError = 0.01;

double actual = 1; //Change based on situation
double desired = 10;

double priorActual = actual;
double integral = 0;
double error = desired - actual;

public double calculate () {
	priorActual = actual;
	actual = <get sensor data>;
	error = desired - actual;
	if (Math.abs(desired-actual) < marginOfError){
		<End of PID, Position Achieved>
	} else {
		integral = integral + current - desired;
	}
	return proportionFactor*error + integralFactor*integral + derivativeFactor*(actual-priorActual);
}

Toggling Double Solenoids

package frc.robot;

import edu.wpi.first.wpilibj.TimedRobot;
import edu.wpi.first.wpilibj.Joystick;
import edu.wpi.first.wpilibj.*;

public class Robot extends TimedRobot {

	Compressor com = new Compressor(40);
	DoubleSolenoid sol = new DoubleSolenoid(1, 2);

	Joystick joy = new Joystick(1);

	//This function is run when the robot is first started up and should be used for any initialization code.
	
	public void robotInit() {
		//set up compressors
		com.setClosedLoopControl(true);
		com.start();
	}

	
	public void teleopPeriodic() {
		// Called when the button was released since last check
		if(joystick.getRawButtonReleased(0)) {
			if(frontSolenoid.get().equals(kForward)) {
				frontSolenoid.set(kReverse);
			} else if(frontSolenoid.get().equals(kReverse)) {
				frontSolenoid.set(kForward);
			}
			
		}
	}
}

Last Edit on August 12, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

How to Programming

Contents

Guides

Use Motors

TalonFX motor controllers (falcon500 and kraken x60)

SparkMax/SparkFlex motor controllers

Use Joysticks

Use External Encoders

Use the Built-in Accelerometer

Use the Kauai Labs NavX

Use Single Acting Solenoids

Use a Double Solenoid

Use a Compressor

Use a Limit Switch

Start Programming On Your Device

Install Git

Download and Install Java 11 SDK

Setting Up Computer Vision Development Environment

Installing FRC VS Code

Setting up the IDE

Installing CTRE Toolsuite (Optional)

Installing the NI Toolsuite

REV Robotics SparkMAX Client

REV Robotics Libraries

NOTE: SOME OF THE INSTALLERS ARE DOWNLOADED AS `.zip` FILES WHICH YOU NEED TO EXTRACT TO INSTALL PROPERLY

Examples

Make Motor Spin based on Joystick Input

Arcade Drive

Tank Drive

PID Example Snippet

Toggling Double Solenoids

Files

README.md

Latest commit

History

README.md

File metadata and controls

How to Programming

Contents

Guides

Use Motors

TalonFX motor controllers (falcon500 and kraken x60)

SparkMax/SparkFlex motor controllers

Use Joysticks

Use External Encoders

Use the Built-in Accelerometer

Use the Kauai Labs NavX

Use Single Acting Solenoids

Use a Double Solenoid

Use a Compressor

Use a Limit Switch

Start Programming On Your Device

Install Git

Download and Install Java 11 SDK

Setting Up Computer Vision Development Environment

Installing FRC VS Code

Setting up the IDE

Installing CTRE Toolsuite (Optional)

Installing the NI Toolsuite

REV Robotics SparkMAX Client

REV Robotics Libraries

NOTE: SOME OF THE INSTALLERS ARE DOWNLOADED AS .zip FILES WHICH YOU NEED TO EXTRACT TO INSTALL PROPERLY

Examples

Make Motor Spin based on Joystick Input

Arcade Drive

Tank Drive

PID Example Snippet

Toggling Double Solenoids

NOTE: SOME OF THE INSTALLERS ARE DOWNLOADED AS `.zip` FILES WHICH YOU NEED TO EXTRACT TO INSTALL PROPERLY

Make Motor Spin based on Joystick Input　

Arcade Drive　

Tank Drive　