- Name: Blatek
- Site: http://blatek.com
- Contact: [email protected], Dr. Geng [email protected] (VP/CTO), Randy Cyron [email protected], Kevin Knarr [email protected]
- Deja contactes en 2015
- Retour 2/1/16: be back with quotes
- march-2017: button type transducer with a PCB lid
- Contact with Dr. Geng
- We do have a 3.5 MHz transducer. This transducer has a very low profile (4mm) and the active diameter is 17 mm. the focal length is 125 mm. The overall diameter is 19.5 mm.
- Price 350$ / pc, 100USD as bottom line for bigger volumes.
- For 3 frequencies, would go down from 199 to 249$
- Rmq: Based on your focal zone requirement you need the transducers with a F# about 6 to achieve the results you need. I used a formulae as below,-3dB focal zone =7.1 x wavelength x F#^2, here F#=focal length/aperture
We propose a button type transducer with a PCB lid which has two soldering pads on it.
- 3.5 MHz Model, focal zone between 50 and 150 mm
- Qty 5: $499 each
- Qty 100: $335 each
- Qty 1000: $199 each
- 5 MHz Model, focal zone between 30 and 105 mm
- Qty 5: $549 each
- Qty 100: $360 each
- Qty 1000: $224 each
- 7.5 MHz Model, focal zone between 10 and 75 mm.
- Qty 5: $599 each
- Qty 100: $380 each
- Qty 1000: $249 each