Steering navagation controller files for Teensy based boards to use with AgOpenGPS
If your new to the teensy this is what ive had to do:
- You need to update the Arduino IDE
- Install the Teensy program
- The new updated Teensy program 1.55 now inclucdes the latest FlexCAN_T4 & Native Ethernet so you no longer have to update manually.
CaseIH Connections:
CAN1-H = Pin C Diagnostic connector right rear pillar
CAN1-L = Pin D Diagnostic connector right rear pillar
CAN3-H = Pin 3 Nav controller 40 pin connector X-716 or Pin H Diagnostic connector behind seat
CAN3-L = Pin 13 Nav controller 40 pin connector X-716 or Pin J Diagnostic connector behind seat
NOTE: If you are here for the AllInOne Mods, then you need this zip file from the AIOChanges branch:
https://codeload.github.com/lansalot/AOG_CAN_Teensy4.1/zip/refs/heads/AIOChanges