| title | authors | reviewers | creation-date | last-updated | status | |||||
|---|---|---|---|---|---|---|---|---|---|---|
Machine Deletion Phase Hooks |
|
|
2020-06-02 |
2020-08-07 |
implemented |
- Machine Deletion Phase Hooks
Refer to the Cluster API Book Glossary.
A specific point in a machine's reconciliation lifecycle where execution of normal machine-controller behavior is paused or modified.
Describes when a machine has been marked for deletion but is still present in the API. Various actions happen during this phase, such as draining a node, deleting an instance from a cloud provider, and deleting a node object.
The Hook Implementing Controller describes a controller, other than the machine-controller, that adds, removes, and/or responds to a particular lifecycle hook. Each lifecycle hook should have a single HIC, but an HIC can optionally manage one or more hooks.
Defines a set of annotations that can be applied to a machine which affect the linear progress of a machine’s lifecycle after a machine has been marked for deletion. These annotations are optional and may be applied during machine creation, sometime after machine creation by a user, or sometime after machine creation by another controller or application.
Allow custom and 3rd party components to easily interact with a machine or related resources while that machine's reconciliation is temporarily paused. This pause in reconciliation will allow these custom components to take action after a machine has been marked for deletion, but prior to the machine being drained and/or associated instance terminated.
- Define an initial set of hook points for the deletion phase.
- Define an initial set and form of related annotations.
- Define basic expectations for a controller or process that responds to a lifecycle hook.
- Create an exhaustive list of hooks; we can add more over time.
- Create new machine phases.
- Create a mechanism to signal what lifecycle point a machine is at currently.
- Dictate implementation of controllers that respond to the hooks.
- Implement ordering in the machine-controller.
- Require anyone to use these hooks for normal machine operations, these are strictly optional and for custom integrations only.
- Utilize annotations to implement lifecycle hooks.
- Each lifecycle point can have 0 or more hooks.
- Hooks do not enforce ordering.
- Hooks found during machine reconciliation effectively pause reconciliation until all hooks for that lifecycle point are removed from a machine's annotations.
(pre-terminate) As an operator, I would like to have the ability to perform different actions between the time a machine is marked deleted in the api and the time the machine is deleted from the cloud.
For example, when replacing a control plane machine, ensure a new control plane machine has been successfully created and joined to the cluster before removing the instance of the deleted machine. This might be useful in case there are disruptions during replacement and we need the disk of the existing instance to perform some disaster recovery operation. This will also prevent prolonged periods of having one fewer control plane host in the event the replacement instance does not come up in a timely manner.
(pre-drain) As an operator, I want the ability to utilize my own draining controller instead of the logic built into the machine-controller. This will allow me better flexibility and control over the lifecycle of workloads on each node.
For each defined lifecycle point, one or more hooks may be applied as an annotation to the machine object. These annotations will pause reconciliation of a machine object until all hooks are resolved for that lifecycle point. The hooks should be managed by a Hook Implementing Controller or other external application, or manually created and removed by an administrator.
pre-drain.delete.hook.machine.cluster.x-k8s.io
Hooks defined at this point will prevent the machine-controller from draining a node after the machine-object has been marked for deletion until the hooks are removed.
pre-terminate.delete.hook.machine.cluster.x-k8s.io
Hooks defined at this point will prevent the machine-controller from removing/terminating the instance in the cloud provider until the hooks are removed.
"pre-terminate" has been chosen over "pre-delete" because "terminate" is more easily associated with an instance being removed from the cloud or infrastructure, whereas "delete" is ambiguous as to the actual state of the machine in its lifecycle.
<lifecycle-point>.delete.hook.machine.cluster-api.x-k8s.io/<hook-name>: <owner/creator>
This is the point in the lifecycle of reconciling a machine the annotation will have effect and pause the machine-controller.
Each hook should have a unique and descriptive name that describes in 1-3 words what the intent/reason for the hook is. Each hook name should be unique and managed by a single entity.
Some information about who created or is otherwise in charge of managing the annotation. This might be a controller or a username to indicate an administrator applied the hook directly.
These examples are all hypothetical to illustrate what form annotations should take. The names of each hook and the respective controllers are fictional.
pre-drain.hook.machine.cluster-api.x-k8s.io/migrate-important-app: my-app-migration-controller
pre-terminate.hook.machine.cluster-api.x-k8s.io/backup-files: my-backup-controller
pre-terminate.hook.machine.cluster-api.x-k8s.io/wait-for-storage-detach: my-custom-storage-detach-controller
The machine-controller should check for the existence of 1 or more hooks at specific points (lifecycle-points) during reconciliation. If a hook matching the lifecycle-point is discovered, the machine-controller should stop reconciling the machine.
An example of where the pre-drain lifecycle-point might be implemented: https://github.com/kubernetes-sigs/cluster-api/blob/30c377c0964efc789ab2f3f7361eb323003a7759/controllers/machine_controller.go#L270
When a Hook Implementing Controller updates the machine, reconciliation will be triggered, and the machine will continue reconciling as normal, unless another hook is still present; there is no need to 'fail' the reconciliation to enforce requeuing.
When all hooks for a given lifecycle-point are removed, reconciliation will continue as normal.
The machine-controller should not timeout or otherwise consider the lifecycle hook as 'failed.' Only the Hook Implementing Controller may decide to remove a particular lifecycle hook to allow the machine-controller to progress past the corresponding lifecycle-point.
The machine-controller will not attempt to enforce any ordering of hooks. No ordering should be expected by the machine-controller.
Hook Implementing Controllers may choose to provide a mechanism to allow ordering amongst themselves via whatever means HICs determine. Examples could be using CRDs external to the machine-api, gRPC communications, or additional annotations on the machine or other objects.
Hook Implementing Controller is the component that manages a particular lifecycle hook.
- Watch machine objects and determine when an appropriate action must be taken.
- After completing the desired hook action, remove the hook annotation.
- Watch machine objects and add a hook annotation as desired by the cluster administrator.
- Coordinate with other Hook Implementing Controllers through any means possible, such as using common annotations, CRDs, etc. For example, one hook controller could set an annotation indicating it has finished its work, and another hook controller could wait for the presence of the annotation before proceeding.
A Hook Implementing Controller should watch machines and determine when is the best time to take action.
For example, if an HIC manages a lifecycle hook at the pre-drain lifecycle-point, then that controller should take action immediately after a machine has a DeletionTimestamp or enters the "Deleting" phase.
Fine-tuned coordination is not possible at this time; eg, it's not possible to execute a pre-terminate hook only after a node has been drained. This is reserved for future work.
It is entirely up to the Hook Implementing Controller to determine when it is prudent to remove a particular lifecycle hook. Some controllers may want to 'give up' after a certain time period, and others may want to block indefinitely. Cluster operators should consider the characteristics of each controller before utilizing them in their clusters.
- Annotation keys must conform to length limits: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/#syntax-and-character-set
- Requires well-behaved controllers and admins to keep things running smoothly. Would be easy to disrupt machines with poor configuration.
- Troubleshooting problems may increase in complexity, but this is mitigated mostly by the fact that these hooks are opt-in. Operators will or should know they are consuming these hooks, but a future proliferation of the cluster-api could result in these components being bundled as a complete solution that operators just consume. To this end, we should update any troubleshooting guides to check these hook points where possible.
Require advanced users to fork and customize. This can already be done if someone chooses, so not much of a solution.
We define additional finalizers, but this really only implies the deletion lifecycle point. A misbehaving controller that accidentally removes finalizers could have undesirable effects.
Harder for users to modify or set hooks during machine creation. How would a user remove a hook if a controller that is supposed to remove it is misbehaving? We’d probably need an annotation like ‘skip-hook-xyz’ or similar and that seems redundant to just using annotations in the first place
We probably don’t want other controllers dynamically adding and removing spec fields on an object. It’s not very declarative to utilize spec fields in that way.
Seems like we’d need to sync information to and from a CR. There are different approaches to CRDs (1-to-1 mapping machine to CR, match labels, present/absent vs status fields) that each have their own drawbacks and are more complex to define and configure.
Nothing defined here should directly impact upgrades other than defining hooks that impact creation/deletion of a machine, generally.
Fine-tuned timing of hooks is not possible at this time.
In the future, it is possible to implement this timing via additional machine phases, or possible "sub-phases" or some other mechanism that might be appropriate. As stated in the non-goals, that is not in scope at this time, and could be future work. This is currently being discussed in issue 3365.