unable to set Logitech g502 Lightspeed Led's

[Will2knz]

unable to set the led's to a solid color or off . Apply the settings seems to do nothing and the led's stay in a cycle mode.

[jarbarsi]

I am also experiencing this issue, I've found that changing the profile in the upper left to any other than the currently selected and then back causes the LEDs to update, while the apply button does nothing to the LEDs.

[AsaTheUncle]

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

[marcinmielni]

Debian 12, G502, piper 0.7-1. Applying settings only restarted the cycle, when changed profile in upper left corner profile1(default)->profile0 changes were applied.

[pricardo73]

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

Try changing to profile 0 at upper left corner .
I have a G703 and worked for me.

[AsaTheUncle]

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

Try changing to profile 0 at upper left corner . I have a G703 and worked for me.

Thanks, this did work for my G703.

[ASRodrigo1]

I am also unable to change the LEDs on Logitech G703. When applying it restarts the breathing cycle, nothing else.

Try changing to profile 0 at upper left corner . I have a G703 and worked for me.

G703 here as well. Worked for me. Thank you!