How to point rae at this QR code ?

[richard-xx]

[Erol444]

Hi @richard-xx ,
I believe qr recognition should run on any camera, but you might have most luck with the center front color camera. Note that you only see "RAE" on the screen, it means it's not running robothub agent, and you'd need to restart the service (docs here, manual control: https://docs-beta.luxonis.com/deploy/connect-device/rae)

[richard-xx]

Hi @Erol444 ,
I tried but the LCD always says "Connection Failed".

[Erol444]

Hi @richard-xx ,
I believe that means that either SSID/Password is incorrect, or that RAE isn't close enough to the WIFI - could you double check that?

[richard-xx]

I am sure the SSID/password is correct. When connecting to RAE using ssh (192.168.197.55), I can see the IP address (192.168.0.xxx) of the wireless network, but the LCD shows "Connection Failed".

[samcts2309]

@richard-xx
I got the same issue too right after it scanned the wifi qr code,
then the rae restarted itself and somehow it connected to the wifi showing "Connected to Robothub" afterwards

[Erol444]

@samcts2309 that should mean it's connected to the internet & Robothub. Can you not access the device via robothub afterward?

[samcts2309]

@Erol444 Yes, I can connect the device via robothub afterward.