Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Fresh ARM installation gives errors #5233

Closed
5 tasks done
timscha opened this issue May 12, 2023 · 6 comments
Closed
5 tasks done

Fresh ARM installation gives errors #5233

timscha opened this issue May 12, 2023 · 6 comments
Labels
bug

Comments

@timscha
Copy link

timscha commented May 12, 2023

Contribution guidelines

I've found a bug and checked that ...

  • ... I understand that not following the below instructions will result in immediate closure and/or deletion of my issue.
  • ... I have understood that this bug report is dedicated for bugs, and not for support-related inquiries.
  • ... I have understood that answers are voluntary and community-driven, and not commercial support.
  • ... I have verified that my issue has not been already answered in the past. I also checked previous issues.

Description

Hi guys

I setup a CAX21 on Hetzner - and tried to install the current nightly version of Mailcow. Most of the setup runs smoothly. I selected the nightly channel during the setup. After docker compose up -d the following happened:

Logs:

! unbound-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                 0.0s
 ! dockerapi-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                               0.0s
 ! olefy-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                   0.0s
 ! watchdog-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                0.0s
 ! sogo-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                    0.0s
 ! solr-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                    0.0s
 ! clamd-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                   0.0s
 ! php-fpm-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                 0.0s
 ! postfix-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                 0.0s
 ! dovecot-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                 0.0s
 ! acme-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                    0.0s
 ! rspamd-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                                  0.0s
 ! netfilter-mailcow The requested image's platform (linux/amd64) does not match the detected host platform (linux/arm64/v8) and no specific platform was requested                               0.0s

Steps to reproduce:

1. Install Debian 11 with Docker
2. Clone the repo as described in the docu
3. Start the installation

Which branch are you using?

master

Operating System:

Debian 11

Server/VM specifications:

4

Is Apparmor, SELinux or similar active?

no

Virtualization technology:

KVM

Docker version:

23.0.6

docker-compose version or docker compose version:

v2.17.3

mailcow version:

2023-04b

Reverse proxy:

nginx

Logs of git diff:

Only cert related stuff

Logs of iptables -L -vn:

root@mailcow:/opt/mailcow# iptables -L -vn
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
    4   248 DOCKER-USER  all  --  *      *       0.0.0.0/0            0.0.0.0/0
    4   248 DOCKER-ISOLATION-STAGE-1  all  --  *      *       0.0.0.0/0            0.0.0.0/0
    1    84 ACCEPT     all  --  *      br-mailcow  0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
    2   124 DOCKER     all  --  *      br-mailcow  0.0.0.0/0            0.0.0.0/0
    1    40 ACCEPT     all  --  br-mailcow !br-mailcow  0.0.0.0/0            0.0.0.0/0
    1    84 ACCEPT     all  --  br-mailcow br-mailcow  0.0.0.0/0            0.0.0.0/0
    0     0 ACCEPT     all  --  *      docker0  0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
    0     0 DOCKER     all  --  *      docker0  0.0.0.0/0            0.0.0.0/0
    0     0 ACCEPT     all  --  docker0 !docker0  0.0.0.0/0            0.0.0.0/0
    0     0 ACCEPT     all  --  docker0 docker0  0.0.0.0/0            0.0.0.0/0

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain DOCKER (2 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 ACCEPT     tcp  --  !br-mailcow br-mailcow  0.0.0.0/0            172.22.1.249         tcp dpt:6379
    0     0 ACCEPT     tcp  --  !br-mailcow br-mailcow  0.0.0.0/0            172.22.1.7           tcp dpt:3306
    0     0 ACCEPT     tcp  --  !br-mailcow br-mailcow  0.0.0.0/0            172.22.1.11          tcp dpt:443
    1    40 ACCEPT     tcp  --  !br-mailcow br-mailcow  0.0.0.0/0            172.22.1.11          tcp dpt:80

Chain DOCKER-ISOLATION-STAGE-1 (1 references)
 pkts bytes target     prot opt in     out     source               destination
    1    40 DOCKER-ISOLATION-STAGE-2  all  --  br-mailcow !br-mailcow  0.0.0.0/0            0.0.0.0/0
    0     0 DOCKER-ISOLATION-STAGE-2  all  --  docker0 !docker0  0.0.0.0/0            0.0.0.0/0
    4   248 RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0

Chain DOCKER-ISOLATION-STAGE-2 (2 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 DROP       all  --  *      br-mailcow  0.0.0.0/0            0.0.0.0/0
    0     0 DROP       all  --  *      docker0  0.0.0.0/0            0.0.0.0/0
    1    40 RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0

Chain DOCKER-USER (1 references)
 pkts bytes target     prot opt in     out     source               destination
    4   248 RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0

Logs of ip6tables -L -vn:

root@mailcow:/opt/mailcow# ip6tables -L -vn
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
 1263  111K DOCKER-USER  all      *      *       ::/0                 ::/0
 1263  111K DOCKER-ISOLATION-STAGE-1  all      *      *       ::/0                 ::/0
 1263  111K DOCKER     all      *      br-mailcow  ::/0                 ::/0
    0     0 ACCEPT     all      *      br-mailcow  ::/0                 ::/0                 ctstate RELATED,ESTABLISHED
    0     0 ACCEPT     all      br-mailcow !br-mailcow  ::/0                 ::/0
 1263  111K ACCEPT     all      br-mailcow br-mailcow  ::/0                 ::/0

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain DOCKER (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 ACCEPT     tcp      !br-mailcow br-mailcow  ::/0                 fd4d:6169:6c63:6f77::10  tcp dpt:443
    0     0 ACCEPT     tcp      !br-mailcow br-mailcow  ::/0                 fd4d:6169:6c63:6f77::10  tcp dpt:80

Chain DOCKER-ISOLATION-STAGE-1 (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 DOCKER-ISOLATION-STAGE-2  all      br-mailcow !br-mailcow  ::/0                 ::/0
 1263  111K RETURN     all      *      *       ::/0                 ::/0

Chain DOCKER-ISOLATION-STAGE-2 (1 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 DROP       all      *      br-mailcow  ::/0                 ::/0
    0     0 RETURN     all      *      *       ::/0                 ::/0

Chain DOCKER-USER (1 references)
 pkts bytes target     prot opt in     out     source               destination
 1263  111K RETURN     all      *      *       ::/0                 ::/0

Logs of iptables -L -vn -t nat:

root@mailcow:/opt/mailcow# iptables -L -vn -t nat
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
    6   321 DOCKER     all  --  *      *       0.0.0.0/0            0.0.0.0/0            ADDRTYPE match dst-type LOCAL

Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 DOCKER     all  --  *      *       0.0.0.0/0           !127.0.0.0/8          ADDRTYPE match dst-type LOCAL

Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 MASQUERADE  all  --  *      !br-mailcow  172.22.1.0/24        0.0.0.0/0
    0     0 MASQUERADE  all  --  *      !docker0  172.17.0.0/16        0.0.0.0/0
    0     0 MASQUERADE  tcp  --  *      *       172.22.1.249         172.22.1.249         tcp dpt:6379
    0     0 MASQUERADE  tcp  --  *      *       172.22.1.7           172.22.1.7           tcp dpt:3306
    0     0 MASQUERADE  tcp  --  *      *       172.22.1.11          172.22.1.11          tcp dpt:443
    0     0 MASQUERADE  tcp  --  *      *       172.22.1.11          172.22.1.11          tcp dpt:80

Chain DOCKER (2 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 RETURN     all  --  br-mailcow *       0.0.0.0/0            0.0.0.0/0
    0     0 RETURN     all  --  docker0 *       0.0.0.0/0            0.0.0.0/0
    0     0 DNAT       tcp  --  !br-mailcow *       0.0.0.0/0            127.0.0.1            tcp dpt:7654 to:172.22.1.249:6379
    0     0 DNAT       tcp  --  !br-mailcow *       0.0.0.0/0            127.0.0.1            tcp dpt:13306 to:172.22.1.7:3306
    0     0 DNAT       tcp  --  !br-mailcow *       0.0.0.0/0            0.0.0.0/0            tcp dpt:443 to:172.22.1.11:443
    1    40 DNAT       tcp  --  !br-mailcow *       0.0.0.0/0            0.0.0.0/0            tcp dpt:80 to:172.22.1.11:80

Logs of ip6tables -L -vn -t nat:

root@mailcow:/opt/mailcow# ip6tables -L -vn -t nat
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 DOCKER     all      *      *       ::/0                 ::/0                 ADDRTYPE match dst-type LOCAL

Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 DOCKER     all      *      *       ::/0                !::1                  ADDRTYPE match dst-type LOCAL

Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination
    0     0 MASQUERADE  all      *      br-mailcow  ::/0                 ::/0                 ADDRTYPE match dst-type LOCAL
    0     0 MASQUERADE  all      *      !br-mailcow  fd4d:6169:6c63:6f77::/64  ::/0
    0     0 MASQUERADE  tcp      *      *       fd4d:6169:6c63:6f77::10  fd4d:6169:6c63:6f77::10  tcp dpt:443
    0     0 MASQUERADE  tcp      *      *       fd4d:6169:6c63:6f77::10  fd4d:6169:6c63:6f77::10  tcp dpt:80

Chain DOCKER (2 references)
 pkts bytes target     prot opt in     out     source               destination
    0     0 RETURN     all      br-mailcow *       ::/0                 ::/0
    0     0 DNAT       tcp      !br-mailcow *       ::/0                 ::/0                 tcp dpt:443 to:[fd4d:6169:6c63:6f77::10]:443
    0     0 DNAT       tcp      !br-mailcow *       ::/0                 ::/0                 tcp dpt:80 to:[fd4d:6169:6c63:6f77::10]:80

DNS check:

Error response from daemon: Container 90ac558bd7768c63b651aa492612ad408669f3c19b7c1440c0ee8f43849131b9 is restarting, wait until the container is running
@timscha timscha added the bug label May 12, 2023
@timscha timscha changed the title Fresh installation gives errors Fresh ARM installation gives errors May 12, 2023
@timscha
Copy link
Author

timscha commented May 12, 2023

An additional "./update.sh --nightly" also didn't made any difference.

@DerLinkman
Copy link
Member

DerLinkman commented May 12, 2023 •
edited
Loading

ARM64 is not on nightly yet.

Still on it's seperate branch.

Therefor only usable their or not.

Follow us on twitter or our blog or check the PR: #5219 for new informations regarding ARM64 support.

@twixi
Copy link

twixi commented Aug 1, 2023

any news?

@DerLinkman
Copy link
Member

any news?

See: https://mailcow.email/posts/whats-up-arm64/

@twixi
Copy link

twixi commented Aug 3, 2023

need arm as soon as possible!

@DerLinkman
Copy link
Member

need arm as soon as possible!

Then you might check out this:
https://mailcow.email/posts/2023/arm64-open-beta/

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
bug
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@timscha @twixi @DerLinkman