Skip to content

Latest commit

 

History

History
160 lines (105 loc) · 4.99 KB

README.md

File metadata and controls

160 lines (105 loc) · 4.99 KB
Raw

Build Status

The latest version of this document can be found at wiki.

Overview

xrdp implements Audio Output redirection using PulseAudio, which is a sound system used on POSIX operating systems.

The server to client audio redirection is implemented as per Remote Desktop Protocol: Audio Output Virtual Channel Extension [MS-RDPEA] specs, which means it is interoperable with any RDP client which implements it (most of them including: MS RDP clients, FreeRDP).

However, our Microphone redirection (client to server) implementation is proprietary and doesn't implement the [MS-RDPEAI] specs. Its only supported by the following clients so far: NeutrinoRDP client and rdesktop.

Here is how to build pulseaudio modules for your distro, so you can have audio support through xrdp.

In this instruction, pulseaudio version is 11.1. You need to replace the version number in this instruction if your environment has different versions. You can find out your pulseaudio version executing the following command:

pulseaudio --version

or

pkg-config --modversion libpulse

How to build

Debian 9 / Ubuntu

This instruction also should be applicable to the Ubuntu family.

Prerequisites

Some build tools and package development tools are required. Make sure install the tools.

apt install build-essential dpkg-dev

Prepare & build

Install pulseaudio and requisite packages to build pulseaudio.

apt install pulseaudio
apt build-dep pulseaudio

Fetch the pulseaudio source. You'll see pulseaudio-11.1 directory in your current directory.

apt source pulseaudio

Enter into the directory and build the pulseaudio package.

cd pulseaudio-11.1
./configure

Finally, let's build xrdp source / sink modules. You'll have two .so files module-xrdp-sink.so and module-xrdp-source.so.

git clone https://github.com/neutrinolabs/pulseaudio-module-xrdp.git
cd pulseaudio-module-xrdp
./bootstrap && ./configure PULSE_DIR=/path/to/pulseaudio-11.1
make

CentOS 7.x (7.5 or later requires this build procedure)

Prerequisites

Some build tools and package development tools are required. Make sure install the tools.

yum groupinstall "Development Tools"
yum install rpmdevtools yum-utils
rpmdev-setuptree

Prepare & build

Install pulseaudio and requisite packages to build pulseaudio.

yum install pulseaudio pulseaudio-libs pulseaudio-libs-devel
yum-builddep pulseaudio

Fetch the pulseaudio source and extract. You'll see `~/rpmbuild/BUILD/

yumdownloader --source pulseaudio
rpm --install pulseaudio*.src.rpm

Build the pulseaudio source. In this phase, pulseaudio is not necessarily needed to be built but configured however there's no way to do only configure.

rpmbuild -bb --noclean ~/rpmbuild/SPECS/pulseaudio.spec

Finally, let's build xrdp source / sink modules. You'll have two .so files module-xrdp-sink.so and module-xrdp-source.so.

git clone https://github.com/neutrinolabs/pulseaudio-module-xrdp.git
cd pulseaudio-module-xrdp
./bootstrap && ./configure PULSE_DIR=~/rpmbuild/BUILD/pulseaudio-10.0
make

Other distro

First off, find out your pulseaudio version using pulseaudio --version command. Download the tarball of the pulseaudio version that you have.

After downloading the tarball, extract the tarball and cd into the source directory, then run ./configure.

wget https://freedesktop.org/software/pulseaudio/releases/pulseaudio-11.1.tar.xz
tar xf pulseaudio-11.1.tar.xz
cd pulseaudio-11.1
./configure

If additional packages are required to run ./configure, install requisite packages depending on your environment.

Finally, let's build xrdp source / sink modules. You'll have two .so files module-xrdp-sink.so and module-xrdp-source.so.

git clone https://github.com/neutrinolabs/pulseaudio-module-xrdp.git
cd pulseaudio-module-xrdp
./bootstrap && ./configure PULSE_DIR=/path/to/pulseaudio-11.1
make

Install

Just make install should install built modules to the correct directory.

You can confirm if the modules properly installed by following command:

ls $(pkg-config --variable=modlibexecdir libpulse)

If you can see lots of module-*.so and module-xrdp-sink.so, module-xrdp-source.so, PulseAudio modules should be properly built and installed.

module-xrdp-sink.la and module-xrdp-source.so may be installed to the target directory, these files are not necessary and you can remove them safely.

Enjoy!

See if it works

To see if it works, run pavumeter in the xrdp session. Playback any YouTube video in Firefox. You'll see "Showing signal levels of xrdp sink" and volume meter moving.