Skip to content

Latest commit

 

History

History
395 lines (292 loc) · 13.2 KB

parameters.md

File metadata and controls

395 lines (292 loc) · 13.2 KB
Raw

ScubaGear Parameters

The Invoke-SCuBA cmdlet has several command-line parameters, which are described below.

Note: Some parameters can also be specified in a configuration file. If specified in both, command-line parameters have precedence over the config file.

Note: Parameters use the Pascal case convention , and their names are consistent with those in the configuration file.

AppID

AppID is the application ID of the service principal that is used during non-interactive mode authentication.

Parameter Value
Optional Yes
Datatype String
Default n/a
Config File Yes

Here is an example using -AppID:

# Authenticate with a service principal
Invoke-SCuBA -ProductNames teams `
  -CertificateThumbprint fedcba9876543210fedcba9876543210fedcba98 `
  -AppID abcdef0123456789abcde01234566789 `
  -Organization contoso.onmicrosoft.com

Note: AppID, CertificateThumbprint, and Organization are part of a parameter set used for authentication; if one is specified, all three must be specified.

CertificateThumbprint

CertificateThumbprint is the thumbprint of the certificate that is used for non-interactive mode authentication. The underlying PowerShell modules retrieve the certificate from the user's certificate store.

Parameter Value
Optional Yes
Datatype String
Default n/a
Config File Yes

Here is an example using -CertificateThumbprint:

# Authenticate with a service principal
Invoke-SCuBA -ProductNames teams `
  -CertificateThumbprint fedcba9876543210fedcba9876543210fedcba98 `
  -AppID abcdef0123456789abcde01234566789 `
  -Organization contoso.onmicrosoft.com

Note: AppID, CertificateThumbprint, and Organization are part of a parameter set used for authentication; if one is specified, all three must be specified.

ConfigFilePath

ConfigFilePath is the path of a configuration file that ScubaGear parses for input parameters.

Parameter Value
Optional Yes
Datatype String
Default Directory where ScubaGear is executed
Config File No

Here's an example using -ConfigFilePath:

# Set the inputs using a configuration file
Invoke-SCuBA -ProductNames teams `
  -ConfigFilePath C:\users\<username>\Documents\scuba\config.json

If -ConfigFilePath is specified, default values will be used for any parameters that are not added to the config file. These default values are shown in the full config file.

More information about the configuration file can be found on the configuration page.

Note: Path can be absolute or relative.

DarkMode

DarkMode enables the HTML report to have a dark mode look.

Parameter Value
Optional Yes
Datatype Switch
Default n/a
Config File No 
# View HTML report in dark mode
Invoke-SCuBA -ProductNames teams `
  -DarkMode

DisconnectOnExit

DisconnectOnExit deletes the authentication tokens from your local machine that were used to connect to the Microsoft APIs; this will for you to re-authenticate the next time you run ScubaGear. The name of this parameter is a misnomer.

Parameter Value
Optional Yes
Datatype Switch
Default n/a
Config File Yes 
# Delete the auth token
Invoke-SCuBA -ProductNames teams `
  -DisconnectOnExit

LogIn

LogIn enforces or bypasses authentication. If $true, ScubaGear will prompt the user to provide credentials to establish a connection to the specified M365 products in the ProductNames variable. If $false, it will use the previously issued authentication token, if it has not expired.

Parameter Value
Optional Yes
Datatype Boolean
Default $true
Config File Yes

This variable should typically be $true, as a connection is established in the current PowerShell terminal session with the first authentication. If another verification is run in the same PowerShell session, then this variable can be set to false to bypass a second authenticate.

# Reuse previous authentication
Invoke-SCuBA -ProductNames teams `
  -LogIn $false

Note: Defender will ask for authentication even if this variable is set to false.

M365Environment

M365Environment is used to authenticate to the various M365 commercial/government environments.

Parameter Value
Optional Yes
Datatype String
Default commercial
Config File Yes

Note: This parameter is required if authenticating to Power Platform. It is also required if executing the tool against GCC High or DoD tenants.

# Assess a government commercial account
Invoke-SCuBA -ProductNames teams `
  -M365Environment gcc

The list of acceptable values are:

Tenant Value
Non-government tenants commercial
Government cloud tenants gcc
Government cloud tenants (high) gcchigh
Department of Defense tenants dod

MergeJson

MergeJson combines the JSON files (named TeamsReport.json) in the IndividualReports folder together with the ProviderSettingsExport.json into an uber JSON file. These files are deleted, though the combined report, TestResults.json is not deleted.

Parameter Value
Optional Yes
Datatype Switch
Default n/a
Config File No 
# Delete the JSON files
Invoke-SCuBA -ProductNames teams `
  -MergeJson

OPAPath

OPAPath is the location of the folder that contains the Open Policy Agent (OPA) policy engine executable file. The executable must be named opa_windows_amd64.exe. For most cases, this parameter should not be used.

Parameter Value
Optional Yes
Datatype String
Default C:\Users\<username>\.scubagear\Tools
Config File Yes 
# Change the directory that contains the OPA exe
Invoke-SCuBA -ProductNames teams `
  -OPAPath "C:\Users\<username>\Downloads"

Note: Path can be absolute or relative.

Organization

Organization is the organization that's used in non-interactive mode authentication. It is of the form contoso.onmicrosoft.com.

Parameter Value
Optional Yes
Datatype String
Default n/a
Config File Yes

Here is an example using Organization:

# Authenticate with a service principal
Invoke-SCuBA -ProductNames teams `
  -CertificateThumbprint fedcba9876543210fedcba9876543210fedcba98 `
  -AppID abcdef0123456789abcde01234566789 `
  -Organization contoso.onmicrosoft.com

Note: AppID, CertificateThumbprint, and Organization are part of a parameter set used for authentication; if one is specified, all three must be specified.

OutFolderName

OutFolderName is the first half of the name of the folder where the report files will be created. The second half is a timedate stamp. The location of this folder is determined by the OutPath parameter.

Parameter Value
Optional Yes
Datatype String
Default M365BaselineConformance
Config File Yes 
# Put the results in the testing folder
Invoke-SCuBA -ProductNames teams `
  -OutFolderName testing

OutJsonFileName

OutJsonFileName renames the uber JSON file that is created if the MergeJson parameter is used. This should only be the base file name, as the extension .json will automatically be added.

Parameter Value
Optional Yes
Datatype String
Default ScubaResults.json
Config File No

Note: This parameter does not work if the -MergeJson parameter is not present.

# Put the results in the testing folder
Invoke-SCuBA -ProductNames teams `
  -OutJsonFileName myresults `
  -MergeJson

OutPath

OutPath is the folder path where the report files will be created. The folder will be created if it does not exist.

Parameter Value
Optional Yes
Datatype String
Default M365BaselineConformance with a timestamp
Config File Yes 
# Put the results in the testing folder
Invoke-SCuBA -ProductNames teams `
  -OutPath myresults

Note: Path can be absolute or relative.

OutProviderFileName

OutProviderFileName is the name the JSON file that contains all of the information that ScubaGear extracted from the products.

Parameter Value
Optional Yes
Datatype String
Default ProviderSettingsExport
Config File Yes 
# Put the results in the testing folder
Invoke-SCuBA -ProductNames teams `
  -OutProviderFileName mysettings

Note: ScubaGear will automatically add the .json to this filename.

OutRegoFileName

OutRegoFileName is the name of the test results file in JSON and CSV that are created in the output folder.

Parameter Value
Optional Yes
Datatype String
Default TestResults
Config File Yes 
# Put the results in the testing folder
Invoke-SCuBA -ProductNames teams `
  -OutRegoFileName mytestresults

Note: ScubaGear will automatically add the .csv and the .json respectively to these filenames.

OutReportName

OutReportName is the name of the HTML file that is a summary of the detailed reports created in the output folder.

Parameter Value
Optional Yes
Datatype String
Default BaselineReports
Config File Yes 
# Put the results in the testing folder
Invoke-SCuBA -ProductNames teams `
  -OutReportName myreport

Note: ScubaGear will automatically add the .html to this filename.

ProductNames

ProductNames provides one or more M365 shortened product names that ScubaGear will assess.

Parameter Value
Optional Yes
Datatype List of Strings
Default ["aad", "defender", "exo", "sharepoint", "teams"]
Config File Yes

The list of acceptable values are:

Product Product Name
Entra ID aad
Defender for Office 365 defender
Exchange Online exo
Power Platform powerplatform
SharePoint Online and OneDrive for Business sharepoint
Microsoft Teams teams 
# Assess two products
Invoke-SCuBA -ProductNames teams, exo

Note: Product names are separated by commas.

Quiet

Quiet prevents the HTML report will not be opened in an external web browser.

Parameter Value
Optional Yes
Datatype Switch
Default n/a
Config File No 
# Do not open the browser
Invoke-SCuBA -ProductNames teams `
  -Quiet

Version

Version writes the current ScubaGear version to the console. ScubaGear will not be run. When the Version parameter is used, no other parameters should be included.

Parameter Value
Optional Yes
Datatype Switch
Default n/a
Config File No 
# Check the version
Invoke-SCuBA -Version