goodwe_eco_mode_power

[tand2000]

Do you see any possibility to extend your excellent work to allow me to adjust the power in ECO CHARGE MODE and ECO DISCHARGE MODE within a range of 0-100 (though practically only ECO CHARGE MODE "0" and ECO DISCHARGE MODE "1")?

ChatGPT might describe the implementation this way, but I'm not sure if it's entirely correct. ChatGPT is not infallible.

Define a new entity or attribute for goodwe_eco_mode_power:
The developer should ensure that the integration provides an entity or attribute to control the Eco mode power value (goodwe_eco_mode_power). This value should be configurable in a range from 0 to 100 to adjust the power output in Eco mode according to the required settings.

Check the API documentation:
The developer needs to verify the GoodWe inverter API to ensure that it accepts and correctly processes the goodwe_eco_mode_power value. There may be specific API endpoints responsible for setting this value, and these should be integrated into the custom component.

Implement the set_value functionality:
If the goodwe_eco_mode_power value is to be set via a slider interface in Home Assistant, the developer should ensure that the corresponding function (set_value) is implemented within the integration and that it sends the value (between 0 and 100) to the inverter.

Limit checks and error handling:
The developer should implement proper limit checks for the goodwe_eco_mode_power value (0-100). If invalid values are passed, the integration should return a clear error message and ensure that the inverter does not respond incorrectly.

Testing and validation:
Finally, the developer should perform tests to ensure that the goodwe_eco_mode_power value is correctly sent to the inverter and that the inverter responds as expected. Specifically, it should be confirmed that the inverter adjusts the power in Eco mode according to the transmitted values.

This would be a more detailed description of the possible steps needed to implement the requested feature.