Shelly Homekit 2.14.0-alpha

[markirb]

This version is an ALPHA version for the following Gen3 Devices.
Usage is at your own risk.

See https://github.com/mongoose-os-apps/shelly-homekit/blob/device/2pmg3/README.md for supported features.

• 1 Gen3
• 1PM Gen3
• 2PM Gen3
• i4 Gen3
• PlugS Gen3

Note that reverting is currently NOT possible for 2PM Gen3 and PlugS Gen3 as there is no original Firmware available yet.
If you want to try it anyways please use something like
curl -F commit_timeout=500 -F [email protected] http://[your ip]/update
for automatic revert after 500 seconds.

Please provide experience and feedback in the corresponding discussion

Support

If you use and enjoy the firmware please consider a donation to support further development.

[bdlooze]

How do I install this alpha release for my gen3 1PM's OTA?

[markirb]

Via web interface of your Shelly firmware. You can manually upload files there

[fhoner]

Are there plans for Shelly Plug S Gen3 as well?

[markirb]

Sure, as soon as someone has the pinout this should be no problem

[fhoner]

thanks! is there anything I could contribute? I have one such device here. or how do you usually get them?

[markirb]

It is already available here:

https://devices.esphome.io/devices/Shelly-Plug-S-Gen3

So I am on the way integrating this.
Note that revert will not be possible on the first version as there is no official firmware from shelly yet.

However if you want to try this out you can via: (this automatically reverts to stock version after 500 seconds)

curl -F commit_timeout=500 -F [email protected] http://[your ip]/update

You can find alpha in release section now