Skip to content

Latest commit

 

History

History
235 lines (163 loc) · 15.7 KB

invocation-async.md

File metadata and controls

235 lines (163 loc) · 15.7 KB

Asynchronous invocation

Several AWS services, such as Amazon Simple Storage Service (Amazon S3) and Amazon Simple Notification Service (Amazon SNS), invoke functions asynchronously to process events. When you invoke a function asynchronously, you don't wait for a response from the function code. You hand off the event to Lambda and Lambda handles the rest. You can configure how Lambda handles errors, and can send invocation records to a downstream resource to chain together components of your application.

The following diagram shows clients invoking a Lambda function asynchronously. Lambda queues the events before sending them to the function.

[]

For asynchronous invocation, Lambda places the event in a queue and returns a success response without additional information. A separate process reads events from the queue and sends them to your function. To invoke a function asynchronously, set the invocation type parameter to Event.

$ aws lambda invoke --function-name my-function  --invocation-type Event --payload '{ "key": "value" }' response.json
{
    "StatusCode": 202
}

The output file (response.json) doesn't contain any information, but is still created when you run this command. If Lambda isn't able to add the event to the queue, the error message appears in the command output.

Lambda manages the function's asynchronous event queue and attempts to retry on errors. If the function returns an error, Lambda attempts to run it two more times, with a one-minute wait between the first two attempts, and two minutes between the second and third attempts. Function errors include errors returned by the function's code and errors returned by the function's runtime, such as timeouts.

[]

If the function doesn't have enough concurrency available to process all events, additional requests are throttled. For throttling errors (429) and system errors (500-series), Lambda returns the event to the queue and attempts to run the function again for up to 6 hours. The retry interval increases exponentially from 1 second after the first attempt to a maximum of 5 minutes. However, it might be longer if the queue is backed up. Lambda also reduces the rate at which it reads events from the queue.

The following example shows an event that was successfully added to the queue, but is still pending one hour later due to throttling.

[]

Even if your function doesn't return an error, it's possible for it to receive the same event from Lambda multiple times because the queue itself is eventually consistent. If the function can't keep up with incoming events, events might also be deleted from the queue without being sent to the function. Ensure that your function code gracefully handles duplicate events, and that you have enough concurrency available to handle all invocations.

When the queue is backed up, new events might age out before Lambda has a chance to send them to your function. When an event expires or fails all processing attempts, Lambda discards it. You can configure error handling for a function to reduce the number of retries that Lambda performs, or to discard unprocessed events more quickly.

You can also configure Lambda to send an invocation record to another service. Lambda supports the following destinations for asynchronous invocation.

  • Amazon SQS – A standard SQS queue.
  • Amazon SNS – An SNS topic.
  • AWS Lambda – A Lambda function.
  • Amazon EventBridge – An EventBridge event bus.

The invocation record contains details about the request and response in JSON format. You can configure separate destinations for events that are processed successfully, and events that fail all processing attempts. Alternatively, you can configure an SQS queue or SNS topic as a dead-letter queue for discarded events. For dead-letter queues, Lambda only sends the content of the event, without details about the response.

Topics

Configuring error handling for asynchronous invocation

Use the Lambda console to configure error handling settings on a function, a version, or an alias.

To configure error handling

  1. Open the Lambda console Functions page.

  2. Choose a function.

  3. Under Asynchronous invocation, choose Edit.

  4. Configure the following settings.

    • Maximum age of event – The maximum amount of time Lambda retains an event in the asynchronous event queue, up to 6 hours.
    • Retry attempts – The number of times Lambda retries when the function returns an error, between 0 and 2.

  5. Choose Save.

When an invocation event exceeds the maximum age or fails all retry attempts, Lambda discards it. To retain a copy of discarded events, configure a failed-event destination.

Configuring destinations for asynchronous invocation

To send records of asynchronous invocations to another service, add a destination to your function. You can configure separate destinations for events that fail processing and events that are successfully processed. Like error handling settings, you can configure destinations on a function, a version, or an alias.

The following example shows a function that is processing asynchronous invocations. When the function returns a success response or exits without throwing an error, Lambda sends a record of the invocation to an EventBridge event bus. When an event fails all processing attempts, Lambda sends an invocation record to an Amazon SQS queue.

[]

To send events to a destination, your function needs additional permissions. Add a policy with the required permissions to your function's execution role. Each destination service requires a different permission, as follows:

Add destinations to your function in the Lambda console's function designer.

To configure a destination for asynchronous invocation records

  1. Open the Lambda console Functions page.

  2. Choose a function.

  3. Under Designer, choose Add destination.

  4. For Source, choose Asynchronous invocation.

  5. For Condition, choose from the following options:

    • On failure – Send a record when the event fails all processing attempts or exceeds the maximum age.
    • On success – Send a record when the function successfully processes an asynchronous invocation.

  6. For Destination type, choose the type of resource that receives the invocation record.

  7. For Destination, choose a resource.

  8. Choose Save.

When an invocation matches the condition, Lambda sends a JSON document with details about the invocation to the destination. The following example shows an invocation record for an event that failed three processing attempts due to a function error.

Example invocation record

{
    "version": "1.0",
    "timestamp": "2019-11-14T18:16:05.568Z",
    "requestContext": {
        "requestId": "e4b46cbf-b738-xmpl-8880-a18cdf61200e",
        "functionArn": "arn:aws:lambda:us-east-2:123456789012:function:my-function:$LATEST",
        "condition": "RetriesExhausted",
        "approximateInvokeCount": 3
    },
    "requestPayload": {
        "ORDER_IDS": [
            "9e07af03-ce31-4ff3-xmpl-36dce652cb4f",
            "637de236-e7b2-464e-xmpl-baf57f86bb53",
            "a81ddca6-2c35-45c7-xmpl-c3a03a31ed15"
        ]
    },
    "responseContext": {
        "statusCode": 200,
        "executedVersion": "$LATEST",
        "functionError": "Unhandled"
    },
    "responsePayload": {
        "errorMessage": "RequestId: e4b46cbf-b738-xmpl-8880-a18cdf61200e Process exited before completing request"
    }
}

The invocation record contains details about the event, the response, and the reason that the record was sent.

Asynchronous invocation configuration API

To manage asynchronous invocation settings with the AWS CLI or AWS SDK, use the following API operations.

To configure asynchronous invocation with the AWS CLI, use the put-function-event-invoke-config command. The following example configures a function with a maximum event age of 1 hour and no retries.

$ aws lambda put-function-event-invoke-config --function-name error \
--maximum-event-age-in-seconds 3600 --maximum-retry-attempts 0
{
    "LastModified": 1573686021.479,
    "FunctionArn": "arn:aws:lambda:us-east-2:123456789012:function:error:$LATEST",
    "MaximumRetryAttempts": 0,
    "MaximumEventAgeInSeconds": 3600,
    "DestinationConfig": {
        "OnSuccess": {},
        "OnFailure": {}
    }
}

The put-function-event-invoke-config command overwrites any existing configuration on the function, version, or alias. To configure an option without resetting others, use update-function-event-invoke-config. The following example configures Lambda to send a record to an SQS queue named destination when an event can't be processed.

$ aws lambda update-function-event-invoke-config --function-name error \
--destination-config '{"OnFailure":{"Destination": "arn:aws:sqs:us-east-2:123456789012:destination"}}'
{
    "LastModified": 1573687896.493,
    "FunctionArn": "arn:aws:lambda:us-east-2:123456789012:function:error:$LATEST",
    "MaximumRetryAttempts": 0,
    "MaximumEventAgeInSeconds": 3600,
    "DestinationConfig": {
        "OnSuccess": {},
        "OnFailure": {
            "Destination": "arn:aws:sqs:us-east-2:123456789012:destination"
        }
    }
}

AWS Lambda function dead-letter queues

As an alternative to an on-failure destination, you can configure your function with a dead-letter queue to save discarded events for further processing. A dead-letter queue acts the same as an on-failure destination in that it is used when an event fails all processing attempts or expires without being processed. However, a dead-letter queue is part of a function's version-specific configuration, so it is locked in when you publish a version. On-failure destinations also support additional targets and include details about the function's response in the invocation record.

If you don't have a queue or topic, create one. Choose the target type that matches your use case.

To send events to a queue or topic, your function needs additional permissions. Add a policy with the required permissions to your function's execution role.

If the target queue or topic is encrypted with a customer managed key, the execution role must also be a user in the key's resource-based policy.

After creating the target and updating your function's execution role, add the dead-letter queue to your function. You can configure multiple functions to send events to the same target.

To configure a dead-letter queue

  1. Open the Lambda console Functions page.

  2. Choose a function.

  3. Under Asynchronous invocation, choose Edit.

  4. Set DLQ resource to Amazon SQS or Amazon SNS.

  5. Choose the target queue or topic.

  6. Choose Save.

To configure a dead-letter queue with the AWS CLI, use the update-function-configuration command.

$ aws lambda update-function-configuration --function-name my-function \
--dead-letter-config TargetArn=arn:aws:sns:us-east-2:123456789012:my-topic

Lambda sends the event to the dead-letter queue as-is, with additional information in attributes. You can use this information to identify the error that the function returned, or to correlate the event with logs or an AWS X-Ray trace.

Dead-letter queue message attributes

  • RequestID (String) – The ID of the invocation request. Request IDs appear in function logs. You can also use the X-Ray SDK to record the request ID on an attribute in the trace. You can then search for traces by request ID in the X-Ray console. For an example, see the error processor sample.
  • ErrorCode (Number) – The HTTP status code.
  • ErrorMessage (String) – The first 1 KB of the error message.

[]

If Lambda can't send a message to the dead-letter queue, it deletes the event and emits the DeadLetterErrors metric. This can happen because of lack of permissions, or if the total size of the message exceeds the limit for the target queue or topic. For example, if an Amazon SNS notification with a body close to 256 KB triggers a function that results in an error, the additional event data added by Amazon SNS, combined with the attributes added by Lambda, can cause the message to exceed the maximum size allowed in the dead-letter queue.

If you're using Amazon SQS as an event source, configure a dead-letter queue on the Amazon SQS queue itself and not on the Lambda function. For more information, see Using AWS Lambda with Amazon SQS.