Skip to content

Latest commit

 

History

History
21 lines (16 loc) · 1.29 KB

README.md

File metadata and controls

21 lines (16 loc) · 1.29 KB
Raw

pico_i2c_mem

Reading and writing to I2C memories with pico.

To read and write to a I2C memory or any I2C device that need register number before data is sent or received use:

int i2c_write_mem_blocking(i2c_inst_t *i2c, uint32_t i2caddr, uint32_t addr, size_t addrsize, uint8_t *src, size_t len);
int i2c_read_mem_blocking(i2c_inst_t *i2c, uint32_t i2caddr, uint32_t addr, size_t addrsize, uint8_t *dst, size_t len);`

The addr paramater is the desired address in the I2C memory. The addrsizeparameter is its length in bytes, the acceptable range is 1-4.

The other parameters are as in the i2c_write_blocking(). The return value is either the number of bytes written to or read from the memory, not including address bytes, or PICO_GENERIC_ERROR in case of errors, including NACK while writing the memory address.

To use this in your pico project:

  • copy this directory (MemI2C) as a subdirectory of the base project directory or add it as a git submodule
  • add the following line to the main CMakeLists.txt, after the add_executable(...) statement:
    add_subdirectory( MemI2C )
  • At least version 3.13 of CMake is needed, make sure the main CMakeLists.txt begins with a
    cmake_minimum_required(VERSION 3.13) (or later) line to correctly set policies.
  • use #include "memI2C.h" as needed.