From 64c31a204a79f061f1c9b3ff841d134b2d3bb1bc Mon Sep 17 00:00:00 2001 From: Leo Siepel Date: Tue, 24 Dec 2024 21:31:29 +0100 Subject: [PATCH] Adapt documentation Signed-off-by: Leo Siepel --- bundles/org.openhab.binding.cbus/README.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/bundles/org.openhab.binding.cbus/README.md b/bundles/org.openhab.binding.cbus/README.md index 37dccfeff9b21..08517a68c18cf 100644 --- a/bundles/org.openhab.binding.cbus/README.md +++ b/bundles/org.openhab.binding.cbus/README.md @@ -9,8 +9,10 @@ This binding connects to C-Gate software which can be downloaded from the [Clips There is information about setting up the C-Gate software in the [CBus Forums](https://www.cbusforums.com/forums/c-bus-toolkit-and-c-gate-software.4). Make sure that the config/access.txt file allows a connection from computer running openHAB. -Whilst all versions of C-Gate should work 2.11.2 contained a fix for handling Indicator Kill messages for trigger groups. -Without that they will remain on the last value set and wont match what is shown on CBus devices. +Whilst all versions of C-Gate should work, some need special attention: + +- Versions before 2.11.2 lack a fix for handling Indicator Kill messages for trigger groups. Without that they will remain on the last value set and wont match what is shown on CBus devices. +- Versions from 3.4.0 or later have `event-millis` set to true by default, the binding cannot handle this. Adapt your cgate configuration file `C-GateConfig.txt` and set `event-millis=no`. First the CGate Connection bridge needs to be configured with the ip address of the computer running the C-Gate software. After this a Bridge is creaed for each network configured on the CBus Network. The CBus Project Name and the network Id for that network