Oops: Unable to determine board revision from /proc/cpuinfo

[marcosradix]

Oops: Unable to determine board revision from /proc/cpuinfo
-> No "Hardware" line
-> You'd best google the error to find out why.

When I am trying to using it, if I try gpio readall it gos well:
+------+-----+----------+------+---+ OPi 3 +---+------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+------+---+----++----+---+------+----------+-----+------+
| | | 3.3V | | | 1 || 2 | | | 5V | | |
| 122 | 0 | SDA.0 | OFF | 0 | 3 || 4 | | | 5V | | |
| 121 | 1 | SCL.0 | OFF | 0 | 5 || 6 | | | GND | | |
| 118 | 2 | PWM.0 | OFF | 0 | 7 || 8 | 0 | OFF | PL02 | 3 | 354 |
| | | GND | | | 9 || 10 | 0 | OFF | PL03 | 4 | 355 |
| 120 | 5 | RXD.3 | OFF | 0 | 11 || 12 | 0 | OFF | PD18 | 6 | 114 |
| 119 | 7 | TXD.3 | OFF | 0 | 13 || 14 | | | GND | | |
| 362 | 8 | PL10 | OFF | 0 | 15 || 16 | 0 | OFF | PD15 | 9 | 111 |
| | | 3.3V | | | 17 || 18 | 0 | OFF | PD16 | 10 | 112 |
| 229 | 11 | MOSI.1 | OFF | 0 | 19 || 20 | | | GND | | |
| 230 | 12 | MISO.1 | OFF | 0 | 21 || 22 | 0 | OFF | PD21 | 13 | 117 |
| 228 | 14 | SCLK.1 | OFF | 0 | 23 || 24 | 0 | OFF | CE.1 | 15 | 227 |
| | | GND | | | 25 || 26 | 0 | OFF | PL08 | 16 | 360 |
+------+-----+----------+------+---+----++----+---+------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+------+---+ OPi 3 +---+------+----------+-----+------+

I am using orange pi 3 its board

[Gazgiza]

I got the same. But on my Opi5