Could WEBUI see the matter device over thread ? Is it possible to setup a board router PI from iphone?

[392625227]

I have set up the border router on the Raspberry Pi, it works fine, I can view and manage Thread devices for WebUI, but I can't see Thread-based matter devices, how can WebUI see these Thread-based Matter devices? In addition, the iPhone cannot find this border router, where is the help file? Thanks for any help.

[wgtdkp]

how can WebUI see these Thread-based Matter devices?

How is your Matter-over-Thread devices commissioned? By an Android phone, CHIP tool or other tools? Please provide more details.

In addition, the iPhone cannot find this border router, where is the help file?

How did you determine that iPhone cannot find this border router? Scan with mDNS discovery apps or try Matter-over-Thread commissioning with iphone and it failed?

[392625227]

I want to address the second problem first:
Q:How did you determine that iPhone cannot find this border router? Scan with mDNS discovery apps or try Matter-over-Thread commissioning with iphone and it failed?
A: I burned examples/lighting-app on nrf52840dongle, tried to test this lighting example with the home-kit app connection on the iphone, but the iPhone shows "Unable to add accessories, pairing failed", nrf52840dongle's uart log file is as follows:

renxn@Jason_Ren:~$ sudo minicom -D /dev/ttyACM0 -C log -c on

Welcome to minicom 2.7.1

OPTIONS: I18n
Compiled on Dec 23 2019, 02:06:26.
Port /dev/ttyACM0, 12:31:07

Press CTRL-A Z for help on special keys

I: Init CHIP stack
I: 279184 [DL]BLE address: D0:E1:82:09:73:9B
I: SoftDevice Controller build revision:
I: 6d 90 41 2a 38 e8 ad 17 |m.A*8...
I: 29 a5 03 38 39 27 d7 85 |)..89'..
I: 1f 85 d8 e1 |....
I: 279196 [DL]OpenThread started: OK
I: 279197 [DL]Setting OpenThread device type to MINIMAL END DEVICE
I: 279198 [SVR]Server initializing...
I: 279199 [TS]Last Known Good Time: 2023-03-09T08:43:41
I: 279202 [DMG]AccessControl: initializing
I: 279202 [DMG]Examples::AccessControlDelegate::Init
I: 279203 [DMG]AccessControl: setting
I: 279204 [DMG]DefaultAclStorage: initializing
I: 279204 [DMG]DefaultAclStorage: 0 entries loaded
E: 279205 [IN]SO_REUSEPORT failed: 109
I: 279213 [ZCL]Using ZAP configuration...
I: 279231 [DMG]AccessControlCluster: initializing
I: 279232 [ZCL]Initiating Admin Commissioning cluster.
I: 279232 [ZCL]Door Lock server initialized
I: 279233 [ZCL]Initialize PCC Plugin Server Cluster.
E: 279234 [ZCL]DeviceInfoProvider is not registered
E: 279235 [ZCL]Failed to read calendar type with error: 0x86
I: 279236 [ZCL]Initialize PCC Server Cluster [EP:1]
I: 279237 [ZCL]Constant Pressure Not Supported
I: 279238 [ZCL]PCC Server: Constant Proportional Pressure Not Supported
I: 279239 [ZCL]PCC Server: Constant Flow Not Supported
I: 279239 [ZCL]PCC Server: Constant Temperature Not Supported
I: 279240 [ZCL]PCC Server: Constant Speed Not Supported
I: 279241 [ZCL]PCC Server: ControlMode attribute not available
I: 279242 [ZCL]PCC Server: PumpStatus attribute not available
I: 279246 [DIS]Updating services using commissioning mode 1
I: 279248 [DIS]Advertise commission parameter vendorID=65521 productID=32769 discriminator=3840/15 cm=1
E: 279250 [DIS]Failed to advertise commissionable node: 3
E: 279250 [DIS]Failed to finalize service update: 1c
I: 279251 [DIS]Updating services using commissioning mode 1
I: 279253 [DIS]Advertise commission parameter vendorID=65521 productID=32769 discriminator=3840/15 cm=1
E: 279254 [DIS]Failed to advertise commissionable node: 3
E: 279255 [DIS]Failed to finalize service update: 1c
I: 279256 [DIS]Delaying proxy of operational discovery: missing delegate
I: 279257 [IN]CASE Server enabling CASE session setups
I: 279258 [SVR]Joining Multicast groups
I: 279259 [SVR]Server Listening...
I: 279259 [DL]Device Configuration:
I: 279260 [DL] Serial Number: 11223344556677889900
I: 279261 [DL] Vendor Id: 65521 (0xFFF1)
I: 279262 [DL] Product Id: 32769 (0x8001)
I: 279263 [DL] Hardware Version: 0
I: 279264 [DL] Setup Pin Code (0 for UNKNOWN/ERROR): 20202021
I: 279266 [DL] Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00)
I: 279268 [DL] Manufacturing Date: (not set)
I: 279269 [DL] Device Type: 65535 (0xFFFF)
I: 279271 [SVR]SetupQRCode: [MT:-24J042C00KA0648G00]
I: 279272 [SVR]Copy/paste the below URL in a browser to see the QR Code:
I: 279273 [SVR]https://project-chip.github.io/connectedhomeip/qrcode.html?data=MT%3A-24J042C00KA0648G00
I: 279274 [SVR]Manual pairing code: [34970112332]
I: 279276 [DL]CHIP task running
I: 279279 [DL]CHIPoBLE advertising started
I: 279281 [SVR]Cannot load binding table: a0
I: 298675 [DL]BLE connection established (ConnId: 0x00)
I: 298676 [DL]Current number of connections: 1/2
I: 298676 [DL]CHIPoBLE advertising stopped
W: Ignoring data for unknown channel ID 0x003a
I: 299648 [BLE]local and remote recv window sizes = 5
I: 299649 [BLE]selected BTP version 4
I: 299650 [BLE]using BTP fragment sizes rx 244 / tx 244.
I: 299768 [DL]CHIPoBLE connection established (ConnId: 0x00, GATT MTU: 247)
I: 299829 [EM]>>> [E:31096r M:81400257] (U) Msg RX from 0:0415B3D24DD90B1A [0000] --- Type 0000:20 (SecureChannel:PBKDFParamRequest)
I: 299832 [EM]<<< [E:31096r M:2660910] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:21 (SecureChannel:PBKDFParamResponse)
I: 299833 IN Sending msg 2660910 to IP address 'BLE'
I: 299979 [EM]>>> [E:31096r M:81400258] (U) Msg RX from 0:0415B3D24DD90B1A [0000] --- Type 0000:22 (SecureChannel:PASE_Pake1)
I: 302011 [EM]<<< [E:31096r M:2660911] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:23 (SecureChannel:PASE_Pake2)
I: 302012 IN Sending msg 2660911 to IP address 'BLE'
E: 302013 [DL]Long dispatch time: 2035 ms, for event type 16388
I: 302109 [EM]>>> [E:31096r M:81400259] (U) Msg RX from 0:0415B3D24DD90B1A [0000] --- Type 0000:24 (SecureChannel:PASE_Pake3)
I: 302111 [EM]<<< [E:31096r M:2660912] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:40 (SecureChannel:StatusReport)
I: 302112 IN Sending msg 2660912 to IP address 'BLE'
I: 302114 [SC]SecureSession[0x20002fa0]: Moving from state 'kEstablishing' --> 'kActive'
I: 302115 [SVR]Commissioning completed session establishment step
I: 302117 [DIS]Updating services using commissioning mode 0
I: 302119 [DIS]Advertise commission parameter vendorID=65521 productID=32769 discriminator=3840/15 cm=0
E: 302120 [DIS]Failed to advertise extended commissionable node: 3
E: 302121 [DIS]Failed to finalize service update: 1c
I: 302122 [SVR]Device completed Rendezvous process
I: 302170 [EM]>>> [E:31097r M:4996490] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:02 (IM:ReadRequest)
I: 302173 [EM]<<< [E:31097r M:136667552] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:05 (IM:ReportData)
I: 302175 IN Sending msg 136667552 on secure session with LSID: 8143
I: 302230 [EM]>>> [E:31098r M:4996491] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:02 (IM:ReadRequest)
I: 302237 [EM]<<< [E:31098r M:136667553] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:05 (IM:ReportData)
I: 302238 IN Sending msg 136667553 on secure session with LSID: 8143
I: 302529 [EM]>>> [E:31099r M:4996492] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:02 (IM:ReadRequest)
I: 302533 [EM]<<< [E:31099r M:136667554] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:05 (IM:ReportData)
I: 302534 IN Sending msg 136667554 on secure session with LSID: 8143
I: 302590 [EM]>>> [E:31100r M:4996493] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:02 (IM:ReadRequest)
I: 302593 [EM]<<< [E:31100r M:136667555] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:05 (IM:ReportData)
I: 302595 IN Sending msg 136667555 on secure session with LSID: 8143
I: 302650 [EM]>>> [E:31101r M:4996494] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:02 (IM:ReadRequest)
I: 302657 [EM]<<< [E:31101r M:136667556] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:05 (IM:ReportData)
I: 302658 IN Sending msg 136667556 on secure session with LSID: 8143
I: 302949 [EM]>>> [E:31102r M:4996495] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:02 (IM:ReadRequest)
I: 302953 [EM]<<< [E:31102r M:136667557] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:05 (IM:ReportData)
I: 302954 IN Sending msg 136667557 on secure session with LSID: 8143
I: 303010 [EM]>>> [E:31103r M:4996496] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:02 (IM:ReadRequest)
I: 303018 [EM]<<< [E:31103r M:136667558] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:05 (IM:ReportData)
I: 303019 IN Sending msg 136667558 on secure session with LSID: 8143
I: 303130 [EM]>>> [E:31104r M:4996497] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 303132 [FS]GeneralCommissioning: Received ArmFailSafe (60s)
I: 303134 [EM]<<< [E:31104r M:136667559] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 303135 IN Sending msg 136667559 on secure session with LSID: 8143
I: 303190 [EM]>>> [E:31105r M:4996498] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 303194 [EM]<<< [E:31105r M:136667560] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 303195 IN Sending msg 136667560 on secure session with LSID: 8143
I: 303250 [EM]>>> [E:31106r M:4996499] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 303252 [ZCL]OpCreds: Certificate Chain request received for PAI
I: 303256 [EM]<<< [E:31106r M:136667561] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 303257 IN Sending msg 136667561 on secure session with LSID: 8143
I: 303430 [EM]>>> [E:31107r M:4996500] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 303432 [ZCL]OpCreds: Certificate Chain request received for DAC
I: 303436 [EM]<<< [E:31107r M:136667562] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 303437 IN Sending msg 136667562 on secure session with LSID: 8143
I: 303610 [EM]>>> [E:31108r M:4996501] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 303612 [ZCL]OpCreds: Received an AttestationRequest command
I: 303644 [ZCL]OpCreds: AttestationRequest successful.
I: 303649 [EM]<<< [E:31108r M:136667563] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 303650 IN Sending msg 136667563 on secure session with LSID: 8143
I: 303917 [EM]>>> [E:31109r M:4996502] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 303919 [FS]GeneralCommissioning: Received ArmFailSafe (60s)
I: 303921 [EM]<<< [E:31109r M:136667564] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 303923 IN Sending msg 136667564 on secure session with LSID: 8143
I: 306137 [EM]>>> [E:31110r M:4996503] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 306139 [ZCL]OpCreds: Received a CSRRequest command
I: 306338 [ZCL]OpCreds: AllocatePendingOperationalKey succeeded
I: 306370 [ZCL]OpCreds: CSRRequest successful.
I: 306373 [EM]<<< [E:31110r M:136667565] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 306374 IN Sending msg 136667565 on secure session with LSID: 8143
E: 306376 [DL]Long dispatch time: 240 ms, for event type 16388
I: 306738 [EM]>>> [E:31111r M:4996504] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 306740 [ZCL]OpCreds: Received an AddTrustedRootCertificate command
I: 306799 [ZCL]OpCreds: AddTrustedRootCertificate successful.
I: 306801 [EM]<<< [E:31111r M:136667566] (S) Msg TX to 0:FFFFFFFB00000000 [0000] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 306803 IN Sending msg 136667566 on secure session with LSID: 8143
I: 307039 [EM]>>> [E:31112r M:4996505] (S) Msg RX from 0:FFFFFFFB00000000 [0000] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 307041 [ZCL]OpCreds: Received an AddNOC command
I: 307045 [FP]Validating NOC chain
I: 307104 [FP]NOC chain validation successful
I: 307105 [FP]Added new fabric at index: 0x1
I: 307105 [FP]Assigned compressed fabric ID: 0x0F13E60B764CCA33, node ID: 0x00000000D22D0399
I: 307107 [TS]Last Known Good Time: 2023-03-09T08:43:41
I: 307107 [TS]New proposed Last Known Good Time: 2023-03-14T04:35:57
I: 307108 [TS]Updating pending Last Known Good Time to 2023-03-14T04:35:57
I: 307131 [ZCL]OpCreds: ACL entry created for Fabric index 0x1 CASE Admin Subject 0x52A344CD8DC3F715
I: 307132 [DIS]Advertise operational node 0F13E60B764CCA33-00000000D22D0399
I: 307134 [ZCL]OpCreds: successfully created fabric index 0x1 via AddNOC
I: 307136 [EM]<<< [E:31112r M:136667567] (S) Msg TX to 1:FFFFFFFB00000000 [CA33] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 307137 IN Sending msg 136667567 on secure session with LSID: 8143
E: 307138 [DL]Long dispatch time: 102 ms, for event type 16388
I: 307218 [EM]>>> [E:31113r M:4996506] (S) Msg RX from 1:FFFFFFFB00000000 [CA33] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 307227 [EM]<<< [E:31113r M:136667568] (S) Msg TX to 1:FFFFFFFB00000000 [CA33] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 307228 IN Sending msg 136667568 on secure session with LSID: 8143
I: 307338 [EM]>>> [E:31114r M:4996507] (S) Msg RX from 1:FFFFFFFB00000000 [CA33] --- Type 0001:08 (IM:InvokeCommandRequest)
I: 309069 [DL]SRP Client was started, detected server: fd0b:9776:80bd:0000:d41b:8f9a:05b4:83c7
I: 309076 [EM]<<< [E:31114r M:136667569] (S) Msg TX to 1:FFFFFFFB00000000 [CA33] --- Type 0001:09 (IM:InvokeCommandResponse)
I: 309078 IN Sending msg 136667569 on secure session with LSID: 8143
I: 309079 [DIS]Advertise operational node 0F13E60B764CCA33-00000000D22D0399
I: 309080 [SVR]Operational advertising enabled
I: 310033 [DIS]Setting operational delegate post init
I: 310033 [DIS]Updating services using commissioning mode 0
I: 310034 [DIS]Advertise operational node 0F13E60B764CCA33-00000000D22D0399
I: 310036 [DL]advertising srp service: 0F13E60B764CCA33-00000000D22D0399._matter._tcp
I: 310039 [DIS]Advertise commission parameter vendorID=65521 productID=32769 discriminator=3840/15 cm=0
I: 310041 [DL]advertising srp service: 022D169D4ED61DD1._matterc._udp
I: 311640 [EM]>>> [E:31115r M:81400260] (U) Msg RX from 0:403625E96DBD5A13 [0000] --- Type 0000:30 (SecureChannel:CASE_Sigma1)
I: 311641 [IN]CASE Server received Sigma1 message. Starting handshake. EC 0x20004920
I: 311642 [IN]CASE Server disabling CASE session setups
I: 311644 [EM]<<< [E:31115r M:2660913 (Ack:81400260)] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:10 (SecureChannel:StandaloneAck)
I: 311645 IN Sending msg 2660913 to IP address 'UDP:[fd87:f4a6:e613:4d2c:82b:171c:fed6:5d99]:51634'
I: 311647 [SC]Received Sigma1 msg
I: 311653 [SC]CASE matched destination ID: fabricIndex 1, NodeID 0x00000000D22D0399
I: 311883 [EM]<<< [E:31115r M:2660914 (Ack:81400260)] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:31 (SecureChannel:CASE_Sigma2)
I: 311885 IN Sending msg 2660914 to IP address 'UDP:[fd87:f4a6:e613:4d2c:82b:171c:fed6:5d99]:51634'
I: 311887 [SC]Sent Sigma2 msg
I: 312031 [EM]>>> [E:31115r M:81400261 (Ack:2660914)] (U) Msg RX from 0:403625E96DBD5A13 [0000] --- Type 0000:40 (SecureChannel:StatusReport)
E: 312033 [SC]Received error (protocol code 2) during pairing process: 54
E: 312034 [IN]CASE Session establishment failed: 54
I: 312035 [EM]<<< [E:31115r M:2660915 (Ack:81400261)] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:10 (SecureChannel:StandaloneAck)
I: 312036 IN Sending msg 2660915 to IP address 'UDP:[fd87:f4a6:e613:4d2c:82b:171c:fed6:5d99]:51634'
I: 312039 [IN]CASE Server enabling CASE session setups
I: 312280 [EM]>>> [E:31116r M:81400262] (U) Msg RX from 0:461BEBD62DE29576 [0000] --- Type 0000:30 (SecureChannel:CASE_Sigma1)
I: 312282 [IN]CASE Server received Sigma1 message. Starting handshake. EC 0x20004920
I: 312283 [IN]CASE Server disabling CASE session setups
I: 312284 [EM]<<< [E:31116r M:2660916 (Ack:81400262)] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:10 (SecureChannel:StandaloneAck)
I: 312285 IN Sending msg 2660916 to IP address 'UDP:[fd87:f4a6:e613:4d2c:82b:171c:fed6:5d99]:51634'
I: 312287 [SC]Received Sigma1 msg
I: 312293 [SC]CASE matched destination ID: fabricIndex 1, NodeID 0x00000000D22D0399
I: 312524 [EM]<<< [E:31116r M:2660917 (Ack:81400262)] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:31 (SecureChannel:CASE_Sigma2)
I: 312525 IN Sending msg 2660917 to IP address 'UDP:[fd87:f4a6:e613:4d2c:82b:171c:fed6:5d99]:51634'
I: 312528 [SC]Sent Sigma2 msg
I: 312753 [EM]>>> [E:31116r M:81400263 (Ack:2660917)] (U) Msg RX from 0:461BEBD62DE29576 [0000] --- Type 0000:40 (SecureChannel:StatusReport)
E: 312755 [SC]Received error (protocol code 2) during pairing process: 54
E: 312756 [IN]CASE Session establishment failed: 54
I: 312757 [EM]<<< [E:31116r M:2660918 (Ack:81400263)] (U) Msg TX to 0:0000000000000000 [0000] --- Type 0000:10 (SecureChannel:StandaloneAck)
I: 312758 IN Sending msg 2660918 to IP address 'UDP:[fd87:f4a6:e613:4d2c:82b:171c:fed6:5d99]:51634'
I: 312760 [IN]CASE Server enabling CASE session setups
I: 363920 [FS]Fail-safe timer expired
E: 363920 [SVR]Failsafe timer expired
I: 363921 [SC]SecureSession[0x20002fa0]: Moving from state 'kActive' --> 'kPendingEviction'
E: 363922 [SVR]Commissioning failed (attempt 1): 32
I: 363923 [BLE]Releasing end point's BLE connection back to application.
I: 363923 [DL]Closing BLE GATT connection (ConnId 00)
I: 363928 [DIS]Updating services using commissioning mode 1
I: 363928 [DIS]Advertise operational node 0F13E60B764CCA33-00000000D22D0399
I: 363931 [DIS]Advertise commission parameter vendorID=65521 productID=32769 discriminator=3840/15 cm=1
I: 363933 [DL]advertising srp service: 022D169D4ED61DD1._matterc._udp
E: 363934 [ZCL]OpCreds: Got FailSafeTimerExpired
E: 363934 [ZCL]OpCreds: Proceeding to FailSafeCleanup on fail-safe expiry!
E: 363935 [FP]Reverting pending fabric data for fabric 0x1
E: 363937 [FP]Warning: metadata not found during delete of fabric 0x1
I: 363967 [FP]Fabric (0x1) deleted.
I: 363968 [ZCL][OnFabricRemoved] Handling a fabric removal from the door lock server [endpointId=1,fabricIndex=1]
E: 363969 [ZCL]Failed to read DoorLock attribute: attribute=0x11, status=0x86
E: 363970 [ZCL][OnFabricRemoved] Unable to cleanup fabric from users - internal error [endpointId=1,fabricIndex=1]
E: 363971 [ZCL]Unable to handle fabric removal from the Door Lock Server instance [endpointId=1,fabricIndex=1]
I: 364010 [ZCL]UserLabel: Last Fabric index 0x1 was removed
I: 364011 [ZCL]OpCreds: Fabric index 0x1 was removed
I: 364142 [TS]Pending Last Known Good Time: 2023-03-14T04:35:57
I: 364144 [TS]Previous Last Known Good Time: 2023-03-09T08:43:41
I: 364145 [TS]Reverted Last Known Good Time to previous value
E: 364147 [FP]Warning: metadata not found during delete of fabric 0x1
E: 364151 [ZCL]OpCreds: failed to delete fabric at index 1: d8
I: 364153 [NP]Reverting Thread operational dataset
E: 364163 [DL]Long dispatch time: 243 ms, for event type 32782
I: 364164 [FS]Fail-safe cleanly disarmed
I: 364167 [DL]BLE GAP connection terminated (reason 0x16)
I: 364168 [DL]Current number of connections: 0/2
I: 364171 [DL]CHIPoBLE advertising started
I: 394171 [DL]CHIPoBLE advertising mode changed to slow

[wgtdkp]

You need to add the Thread network of your Border Router to iPhone with the iOS ThreadNetwork API (https://developer.apple.com/documentation/threadnetwork/thclient/3801788-storecredentials) to be able to commission a Matter-over-Thread device with iPhone.

[392625227]

In this question, I used the Apple TV 7 128G (with thread support) as the border router, not the Raspberry Pi in the first question. Apple TV is connected to the iPhone and working. Without the Apple TV, when I tried to add my NRF52840dongle to my 'apple home' network with the iPhone, the iPhone said "border routing required". When Apple TV working, it becomes a prompt "Unable to pair". I think your tip is that you need the iOS API when using the Raspberry Pi as a border router, right? How can my Matter-over-Thread device connect to Apple TV? My ultimate goal, of course, is that Matter-over-Thread devices end up like Apple home-kits.

[wgtdkp]

Please don't mix two issues in a single ticket. For Matter-over-Thread commissioning, please report the issue at https://github.com/project-chip/connectedhomeip/issues or to Apple

[392625227]

After a few weeks of studying, I finally figured out some problems.

1. The first question, webUI is a web tool used to manage thread devices on otbr (open thread board router), through the join button can see the thread PAN ID of the matter device, such as Apple TV box has established a thread network, assuming you know PSK, you can join this network. Unfortunately, I don't know how to get Apple TV Box's thread network PSK.
2. The second problem, compiled with matter/example/lighting-app/nrfconnect, burned on nrf52840dongles, can already be well controlled by Apple HomeKit. The original problem was that the connection process only needed to ensure that the matter device, Apple TV box, iPhone, all three must be in close range, keep the wireless communication signal good, and connect well to the Internet. When adding a new matter device to your iPhone, enter the QR code, 20202021, 34970112332, all three ways ok.

[jwhui]

Apple shares Thread Credentials via the iOS ThreadNetwork APIs.