Skip to content

Latest commit

 

History

History
93 lines (68 loc) · 3.01 KB

tianocore_build.md

File metadata and controls

93 lines (68 loc) · 3.01 KB
Raw

Coreboot with tianocore payload on apu2

This document describes how to build coreboot image with tianocore payload for PC Engines apu2 platform. Payload is supported since v4.9.0.7 release.

Building coreboot image

  1. Clone the pce-fw-builder

  2. Pull or build docker container:

    docker pull pcengines/pce-fw-builder

  3. Build v4.9.0.7 image:

    ./build.sh release v4.9.0.7 apu2

  4. Invoke distclean:

    ./build.sh dev-build $PWD/release/coreboot apu2 distclean

  5. Copy config file for target platform

    cp $PWD/release/coreboot/configs/config.pcengines_apu2 $PWD/release/coreboot/.config

  6. Create full config:

    ./build.sh dev-build $PWD/release/coreboot apu2 olddefconfig

  7. Invoke menuconfig:

    ./build.sh dev-build $PWD/release/coreboot apu2 menuconfig

  8. In menuconfig go to Payload menu and next:

    • In Add a payload choose Tianocore coreboot payload package
    • Deselect PXE ROM
    • Select Tianocore build type release
    • In Secondary Payloads disable all options
    • Make sure that Tianocore revision is set to origin/coreboot-4.7.x-uefi in the Insert a commit’s SHA-1 or a branch name line.
    • Rest options in Payload menu leave default
    • Save settings and leave menuconfig

    Screenshot from correctly filled Payloads menu:

    Payloads config menu

  9. Build coreboot image

    ./build.sh dev-build $PWD/release/coreboot apu2 CPUS=$(nproc)

  10. After successful build coreboot image file is in release/coreboot/build directory.

Coreboot + tianocore working example

To enter Boot Manager Menu press F2 or down arrow after the message shows up. There is 3s timeout which will proceed directly to booting if no key (or Enter) was pressed.

In Boot Manager user can see what bootable device are visible and what is boot order. UEFI Shell is shown also and in default settings it is always last boot option. Selecting the highlighted option will lead to boot process from selected device.

NOTE: It may happen that even if device is seen in boot menu, tianocore could not boot from it. It is because OS on the selected device uses legacy mode and therefore it is not UEFI-aware system.

In Boot Maintenance Manager user has access to change some basic options, such as boot order or console options. However, it is not recommended to change serial console options, due to possibility of connection lost.

Following example is showing how expected output should looks like and how to move in UEFI shell menu. It was tested on apu4 platform, to which bootable USB stick was attached. As you can see, USB is a primary device in boot order menu. Hence, it always boot from it. To enter UEFI Shell, you need to choose it manually from Boot Manager.