Skip to content

Latest commit

 

History

History
367 lines (254 loc) · 12.6 KB

development.md

File metadata and controls

367 lines (254 loc) · 12.6 KB
Raw

WARNING WARNING WARNING WARNING WARNING

PLEASE NOTE: This document applies to the HEAD of the source tree

If you are using a released version of Kubernetes, you should refer to the docs that go with that version.

The latest 1.0.x release of this document can be found [here](http://releases.k8s.io/release-1.0/docs/devel/development.md).

Documentation for other releases can be found at releases.k8s.io.

Development Guide

Releases and Official Builds

Official releases are built in Docker containers. Details are here. You can do simple builds and development with just a local Docker installation. If want to build go locally outside of docker, please continue below.

Go development environment

Kubernetes is written in Go programming language. If you haven't set up Go development environment, please follow this instruction to install go tool and set up GOPATH. Ensure your version of Go is at least 1.3.

Git Setup

Below, we outline one of the more common git workflows that core developers use. Other git workflows are also valid.

Visual overview

Git workflow

Fork the main repository

  1. Go to https://github.com/kubernetes/kubernetes
  2. Click the "Fork" button (at the top right)

Clone your fork

The commands below require that you have $GOPATH set ($GOPATH docs). We highly recommend you put Kubernetes' code into your GOPATH. Note: the commands below will not work if there is more than one directory in your $GOPATH.

mkdir -p $GOPATH/src/k8s.io
cd $GOPATH/src/k8s.io
# Replace "$YOUR_GITHUB_USERNAME" below with your github username
git clone https://github.com/$YOUR_GITHUB_USERNAME/kubernetes.git
cd kubernetes
git remote add upstream 'https://github.com/kubernetes/kubernetes.git'

Create a branch and make changes

git checkout -b myfeature
# Make your code changes

Keeping your development fork in sync

git fetch upstream
git rebase upstream/master

Note: If you have write access to the main repository at github.com/kubernetes/kubernetes, you should modify your git configuration so that you can't accidentally push to upstream:

git remote set-url --push upstream no_push

Committing changes to your fork

Before committing any changes, please link/copy these pre-commit hooks into your .git directory. This will keep you from accidentally committing non-gofmt'd go code.

cd kubernetes/.git/hooks/
ln -s ../../hooks/pre-commit .

Then you can commit your changes and push them to your fork:

git commit
git push -f origin myfeature

Creating a pull request

  1. Visit https://github.com/$YOUR_GITHUB_USERNAME/kubernetes
  2. Click the "Compare and pull request" button next to your "myfeature" branch.
  3. Check out the pull request process for more details

When to retain commits and when to squash

Upon merge, all git commits should represent meaningful milestones or units of work. Use commits to add clarity to the development and review process.

Before merging a PR, squash any "fix review feedback", "typo", and "rebased" sorts of commits. It is not imperative that every commit in a PR compile and pass tests independently, but it is worth striving for. For mass automated fixups (e.g. automated doc formatting), use one or more commits for the changes to tooling and a final commit to apply the fixup en masse. This makes reviews much easier.

See Faster Reviews for more details.

godep and dependency management

Kubernetes uses godep to manage dependencies. It is not strictly required for building Kubernetes but it is required when managing dependencies under the Godeps/ tree, and is required by a number of the build and test scripts. Please make sure that godep is installed and in your $PATH.

Installing godep

There are many ways to build and host go binaries. Here is an easy way to get utilities like godep installed:

  1. Ensure that mercurial is installed on your system. (some of godep's dependencies use the mercurial source control system). Use apt-get install mercurial or yum install mercurial on Linux, or brew.sh on OS X, or download directly from mercurial.

  2. Create a new GOPATH for your tools and install godep:

export GOPATH=$HOME/go-tools
mkdir -p $GOPATH
go get github.com/tools/godep
  1. Add $GOPATH/bin to your path. Typically you'd add this to your ~/.profile:
export GOPATH=$HOME/go-tools
export PATH=$PATH:$GOPATH/bin

Using godep

Here's a quick walkthrough of one way to use godeps to add or update a Kubernetes dependency into Godeps/_workspace. For more details, please see the instructions in godep's documentation.

  1. Devote a directory to this endeavor:

Devoting a separate directory is not required, but it is helpful to separate dependency updates from other changes.

export KPATH=$HOME/code/kubernetes
mkdir -p $KPATH/src/k8s.io/kubernetes
cd $KPATH/src/k8s.io/kubernetes
git clone https://path/to/your/fork .
# Or copy your existing local repo here. IMPORTANT: making a symlink doesn't work.
  1. Set up your GOPATH.
# Option A: this will let your builds see packages that exist elsewhere on your system.
export GOPATH=$KPATH:$GOPATH
# Option B: This will *not* let your local builds see packages that exist elsewhere on your system.
export GOPATH=$KPATH
# Option B is recommended if you're going to mess with the dependencies.
  1. Populate your new GOPATH.
cd $KPATH/src/k8s.io/kubernetes
godep restore
  1. Next, you can either add a new dependency or update an existing one.
# To add a new dependency, do:
cd $KPATH/src/k8s.io/kubernetes
go get path/to/dependency
# Change code in Kubernetes to use the dependency.
godep save ./...

# To update an existing dependency, do:
cd $KPATH/src/k8s.io/kubernetes
go get -u path/to/dependency
# Change code in Kubernetes accordingly if necessary.
godep update path/to/dependency/...

If go get -u path/to/dependency fails with compilation errors, instead try go get -d -u path/to/dependency to fetch the dependencies without compiling them. This can happen when updating the cadvisor dependency.

  1. Before sending your PR, it's a good idea to sanity check that your Godeps.json file is ok by running hack/verify-godeps.sh

If hack/verify-godeps.sh fails after a godep update, it is possible that a transitive dependency was added or removed but not updated by godeps. It then may be necessary to perform a godep save ./... to pick up the transitive dependency changes.

It is sometimes expedient to manually fix the /Godeps/godeps.json file to minimize the changes.

Please send dependency updates in separate commits within your PR, for easier reviewing.

Unit tests

cd kubernetes
hack/test-go.sh

Alternatively, you could also run:

cd kubernetes
godep go test ./...

If you only want to run unit tests in one package, you could run godep go test under the package directory. For example, the following commands will run all unit tests in package kubelet:

$ cd kubernetes # step into the kubernetes directory.
$ cd pkg/kubelet
$ godep go test
# some output from unit tests
PASS
ok      k8s.io/kubernetes/pkg/kubelet   0.317s

Coverage

Currently, collecting coverage is only supported for the Go unit tests.

To run all unit tests and generate an HTML coverage report, run the following:

cd kubernetes
KUBE_COVER=y hack/test-go.sh

At the end of the run, an the HTML report will be generated with the path printed to stdout.

To run tests and collect coverage in only one package, pass its relative path under the kubernetes directory as an argument, for example:

cd kubernetes
KUBE_COVER=y hack/test-go.sh pkg/kubectl

Multiple arguments can be passed, in which case the coverage results will be combined for all tests run.

Coverage results for the project can also be viewed on Coveralls, and are continuously updated as commits are merged. Additionally, all pull requests which spawn a Travis build will report unit test coverage results to Coveralls. Coverage reports from before the Kubernetes Github organization was created can be found here.

Integration tests

You need an etcd in your path. To download a copy of the latest version used by Kubernetes, either

  • run hack/install-etcd.sh, which will download etcd to third_party/etcd, and then set your PATH to include third_party/etcd.
  • inspect cluster/saltbase/salt/etcd/etcd.manifest for the correct version, and then manually download and install it to some place in your PATH.
cd kubernetes
hack/test-integration.sh

End-to-End tests

You can run an end-to-end test which will bring up a master and two nodes, perform some tests, and then tear everything down. Make sure you have followed the getting started steps for your chosen cloud platform (which might involve changing the KUBERNETES_PROVIDER environment variable to something other than "gce".

cd kubernetes
hack/e2e-test.sh

Pressing control-C should result in an orderly shutdown but if something goes wrong and you still have some VMs running you can force a cleanup with this command:

go run hack/e2e.go --down

Flag options

See the flag definitions in hack/e2e.go for more options, such as reusing an existing cluster, here is an overview:

# Build binaries for testing
go run hack/e2e.go --build

# Create a fresh cluster.  Deletes a cluster first, if it exists
go run hack/e2e.go --up

# Create a fresh cluster at a specific release version.
go run hack/e2e.go --up --version=0.7.0

# Test if a cluster is up.
go run hack/e2e.go --isup

# Push code to an existing cluster
go run hack/e2e.go --push

# Push to an existing cluster, or bring up a cluster if it's down.
go run hack/e2e.go --pushup

# Run all tests
go run hack/e2e.go --test

# Run tests matching the regex "Pods.*env"
go run hack/e2e.go -v -test --test_args="--ginkgo.focus=Pods.*env"

# Alternately, if you have the e2e cluster up and no desire to see the event stream, you can run ginkgo-e2e.sh directly:
hack/ginkgo-e2e.sh --ginkgo.focus=Pods.*env

Combining flags

# Flags can be combined, and their actions will take place in this order:
# -build, -push|-up|-pushup, -test|-tests=..., -down
# e.g.:
go run hack/e2e.go -build -pushup -test -down

# -v (verbose) can be added if you want streaming output instead of only
# seeing the output of failed commands.

# -ctl can be used to quickly call kubectl against your e2e cluster. Useful for
# cleaning up after a failed test or viewing logs. Use -v to avoid suppressing
# kubectl output.
go run hack/e2e.go -v -ctl='get events'
go run hack/e2e.go -v -ctl='delete pod foobar'

Conformance testing

End-to-end testing, as described above, is for development distributions. A conformance test is used on a versioned distro.

The conformance test runs a subset of the e2e-tests against a manually-created cluster. It does not require support for up/push/down and other operations. To run a conformance test, you need to know the IP of the master for your cluster and the authorization arguments to use. The conformance test is intended to run against a cluster at a specific binary release of Kubernetes. See conformance-test.sh.

Testing out flaky tests

Instructions here

Regenerating the CLI documentation

hack/update-generated-docs.sh

Analytics