Skip to content

Latest commit

 

History

History
78 lines (55 loc) · 2.12 KB

README.ESP32.Md

File metadata and controls

78 lines (55 loc) · 2.12 KB
Raw

Requirements

AtomVM has been tested with the version 4 releases of the Espressif esp-idf SDK.

Building AtomVM for ESP32

  • activate the esp-idf build environment:
cd ${HOME}/esp/esp-idf (or the path to your esp-idf root directory)
. ./export.sh
  • build:
cd src/platforms/esp32/ # include the base path to your AtomVM clone i.e.: ${HOME}/AtomVM/src/...
idf.py set-target esp32 # or esp32c3, esp32s2, esp32s3
idf.py menuconfig
idf.py build
  • flash:
./build/mkimage.sh
./build/flashimage.sh

Running BEAM code on ESP32

  • BEAM module must be stripped before using PackBEAM:

    Note: The executable is created in the AtomVM/build/tools/packbeam directory.

./PackBEAM packed.avm module.beam
  • Packed BEAM module should be written to dedicated BEAM partition:
$IDF_PATH/components/esptool_py/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 115200 --before default_reset --after hard_reset write_flash -u --flash_mode dio --flash_freq 40m --flash_size detect  0x210000 packed.avm

Running Hello World

This example will print a Hello World message.

# Flash the hello_world.avm to the device
$ $IDF_PATH/components/esptool_py/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 115200 --before default_reset --after hard_reset write_flash -u --flash_mode dio --flash_freq 40m --flash_size detect  0x210000 build/examples/erlang/hello_world.avm

$ cd src/platforms/esp32

# Open the serial monitor
$ idf.py monitor

Running Blink Example

This example will switch on and off a led connected to GPIO 2 every second.

Flash blink example using following commands:

# Flash the blink.avm to the device
$ $IDF_PATH/components/esptool_py/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 115200 --before default_reset --after hard_reset write_flash -u --flash_mode dio --flash_freq 40m --flash_size detect  0x210000 build/examples/erlang/esp32/blink.avm