inap.db

 
June 2008 U16SSS 
www.dialogic.com 
Dialogic® SS7 Protocols 
INAP Programmer's Manual 
 
 
 
2 
Copyright© 1998-2008 Dialogic Corporation. All Rights Reserved. You may not reproduce this document in whole or in part without 
permission in writing from Dialogic Corporation at the address provided below. 
All contents of this document are furnished for informational use only and are subject to change without notice and do not represent a 
commitment on the part of Dialogic Corporation or its subsidiaries (“Dialogic”). Reasonable effort is made to ensure the accuracy of the 
information contained in the document. However, Dialogic does not warrant the accuracy of this information and cannot accept 
responsibility for errors, inaccuracies or omissions that may be contained in this document. 
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, 
BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN 
A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS 
ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR 
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL 
PROPERTY RIGHT OF A THIRD PARTY. 
Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility 
applications. 
Due to differing national regulations and approval requirements, certain Dialogic products may be suitable for use only in specific 
countries, and thus may not function properly in other countries. You are responsible for ensuring that your use of such products occurs 
only in the countries where such use is suitable. For information on specific products, contact Dialogic Corporation at the address 
indicated below or on the web at www.dialogic.com. 
It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this document, in marketing 
collateral produced by or on web pages maintained by Dialogic may infringe one or more patents or other intellectual property rights 
owned by third parties. Dialogic does not provide any intellectual property licenses with the sale of Dialogic products other than a 
license to use such product in accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are 
provided except pursuant to a signed agreement with Dialogic. More detailed information about such intellectual property is available 
from Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9.  
Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement 
any concepts or applications and does not condone or encourage any intellectual property infringement and disclaims any 
responsibility related thereto. These intellectual property licenses may differ from country to country and it is the 
responsibility of those who develop the concepts or applications to be aware of and comply with different national license 
requirements.  
Dialogic, Dialogic Pro, Brooktrout, Cantata, SnowShore, Eicon, Eicon Networks, Eiconcard, Diva, SIPcontrol, Diva ISDN, TruFax, 
Realblocs, Realcomm 100, NetAccess, Instant ISDN, TRXStream, Exnet, Exnet Connect, EXS, ExchangePlus VSE, Switchkit, N20, 
Powering The Service-Ready Network, Vantage, Making Innovation Thrive, Connecting People to Information, Connecting to Growth and 
Shiva, among others as well as related logos, are either registered trademarks or trademarks of Dialogic. Dialogic's trademarks may be 
used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at 9800 
Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to full 
respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper 
acknowledgement. 
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Other names of actual 
companies and products mentioned herein are the trademarks of their respective owners. 
This document discusses one or more open source products, systems and/or releases. Dialogic is not responsible for your decision to 
use open source in connection with Dialogic products (including without limitation those referred to herein), nor is Dialogic responsible 
for any present or future effects such usage might have, including without limitation effects on your products, your business, or your 
intellectual property rights. 
Publication Date: June 2008 
Document Number: U16SSS, Issue 12 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
3 
Contents 
Revision History...........................................................................................................5 
1 About this Publication.........................................................................................7 
1.1 Introduction...........................................................................................................................7 
1.2 Abbreviations.........................................................................................................................8 
1.3 Related Documentation............................................................................................................9 
1.4 Feature Overview....................................................................................................................9 
2 General Description...........................................................................................11 
2.1 Module Overview..................................................................................................................11 
2.2 INAP Functional Entity Addressing...........................................................................................12 
2.3 INAP Application Context Handling..........................................................................................13 
2.4 Module Dimensions...............................................................................................................13 
2.5 Module Requirements............................................................................................................13 
3 INAP Module User Interface..............................................................................15 
3.1 Introduction.........................................................................................................................15 
3.2 Dialog Primitive Types...........................................................................................................16 
3.3 Service Component Primitives................................................................................................17 
3.4 INAP Dialogue Request Message.............................................................................................18 
3.5 INAP Dialogue Indication Message...........................................................................................20 
3.6 INAP Dialogue Primitive Parameters........................................................................................22 
3.7 INAP Service Request Message...............................................................................................26 
3.8 INAP Service Indication Message............................................................................................27 
3.9 INAP Service Primitive Parameters..........................................................................................29 
4 Functional API User Interface...........................................................................33 
4.1 Introduction.........................................................................................................................33 
4.2 API Function Specifications.....................................................................................................34 
4.3 API Function Parameter Specifications.....................................................................................39 
4.4 INAP – API Message Sequence Charts.....................................................................................44 
4.5 API Dialogue Parameters.......................................................................................................53 
5 Non-Primitive Interface....................................................................................57 
5.1 INAP Configuration Request...................................................................................................57 
5.2 INAP Network Context Configuration Request...........................................................................61 
5.3 INAP Timer Configuration Request..........................................................................................62 
5.4 INAP Functional Entity Configuration Request...........................................................................63 
5.5 INAP Application Context Configuration Request.......................................................................65 
5.6 Read Revision Request..........................................................................................................66 
5.7 INAP Software Event Indication..............................................................................................67 
5.8 INAP Maintenance Event Indication.........................................................................................68 
5.9 INAP Management Event Indication.........................................................................................69 
5.10 INAP Trace Mask Request......................................................................................................70 
5.11 Trace Event Indication...........................................................................................................72 
5.12 INAP Maintenance Mask Request.............................................................................................73 
5.13 INAP Software Event Mask Request.........................................................................................74 
Appendix A. Tick Timer Message Format....................................................................75 
A.1 Tick Timer Message Format....................................................................................................75 
Contents 
4 
Appendix B. Supported INAP Application Contexts....................................................77 
B.1 Overview.............................................................................................................................77 
B.2 Supported INAP Application Contexts......................................................................................78 
B.3 Supported INAP Operations....................................................................................................82 
B.4 Supported INAP Operation Parameters....................................................................................85 
B.5 ETSI CS-1 Operation Definitions.............................................................................................87 
B.6 ITU-T CS-1 Operation Definitions..........................................................................................102 
B.7 CAMEL v1 Operation Definitions............................................................................................117 
B.8 CAMEL v2 Operation Definitions............................................................................................121 
B.9 CAMEL v3 Operation Definitions............................................................................................133 
B.10 CAMEL v4 Operation Definitions............................................................................................160 
B.11 CAMEL v4 for IMS Operation Definitions................................................................................199 
B.12 ETSI CS-2 Operation Definitions...........................................................................................203 
B.13 AIN Operation Definitions....................................................................................................246 
B.14 Operation Extensions..........................................................................................................257 
B.15 Supported INAP Parameter List............................................................................................259 
B.16 Supported INAP Operation Result.........................................................................................283 
B.17 Supported INAP Errors........................................................................................................288 
B.18 Supported INAP Error Parameters.........................................................................................289 
Appendix C. Message Type Reference......................................................................293 
C.1 Message Type Reference.....................................................................................................293 
Figures 
Figure 1. INAP at an SCP.......................................................................................................11 
 
 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
5 
Revision History 
Issue Date Description 
12 June 2008 Rebranding and updates. 
CAMEL v4 and CAMEL v4 for IMS added. 
11 August 2007 CAP v3 documentation revised. 
Minor corrections and updates. 
10 Dec 2005 Added new parameters (qos, user_information, report_cause) 
Addition of a subset of AIN operations from GR-1299-CORE (AINGR). 
Minor corrections and updates. 
9 Jul 2003 Addition of all CAP V3 operations and selected AIN operations. 
8 Jul 2003 Branding changed: references to System7 removed.  
7 Jul 2001 Addition of remaining operations for ETSI CS-2. 
6 Mar 2001 Addition of operations for ETSI CS-2 SCF-SRF interface. 
5 May 2000 Extension of protocol support to provide access to operations and application contexts 
in ITU CS-1 (Oct ‘95) and CAMEL (v1 and v2). 
Enhanced support for the sending and receiving of operation extensions. 
Addition of new parameter for close pre-arranged end handling. 
4 May 1999 Completion of all ETSI CS-1 operations and application contexts included in ETS 300 
374-1.  Includes details of new operations and additional parameters required to 
support these new operations. Addition of the procedure IN_version procedure to 
provide API version information.  
3 Feb 1999 Addition of seven more ETSI 300-374-1 operations. 
2 Nov 1998 Minor Corrections.  
Notes on use of “pre-arranged end” of INAP dialogues 
1 Oct 1998 First Issue. INAP interface.  
Note: The latest release issue of this guide can be found at:  
http://www.dialogic.com/support/helpweb/signaling
Revision History 
6 
 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
7 
1 About this Publication 
1.1 Introduction 
The INAP module enables straightforward development of Intelligent Network 
applications in the SS7 environment. The User application is provided with 
simple access to the operations specified in the Intelligent Network 
Application Protocol (INAP).   
The module is of use to applications implementing any of the functions of the 
following IN Functional Entities: Service Control Function (SCF), Service 
Switching Function (SSF), Specialized Resource Function (SRF) or Call 
Unrelated Service Function (CUSF). 
The module is a portable software implementation of the Single Association 
Control Function (SACF) specified in the Intelligent Network Application 
Protocol (INAP) ([Ref 1] on page 9). 
The module consists of an event driven task using standard structured 
message types, which provides a control interface at the service provider 
level. A suite of API functions is also supplied to provide a convenient 
interface for the user application as well as coding and decoding of IN 
operations.  
The module uses the services provided by the underlying Transaction 
Capabilities (TCAP) service for the transfer of operations between peer INAP 
Functional Entities. 
This Programmer's Manual is intended for users developing their own 
applications that interface to and make use of the functionality provided by 
the INAP module. 
Both the INAP module and the suite of API functions are written using the ‘C’ 
programming language. They are fully portable and make no operating 
system or compiler specific references. 
This manual provides an overview of the API IN functions and the interface to 
the INAP module.  It includes details of all API function parameters and the 
structure of messages used to interface to the INAP module. 
1 About this Publication 
8 
1.2 Abbreviations  
The following table provides a list of abbreviations used in this manual. 
Abbreviation Description 
AIN Advanced Intelligent Network 
ANSI American National Standards Institute 
APDU Application Protocol Data Unit 
ASE Application Service Element 
ASN.1 Abstract Syntax Notation One 
CAMEL Customized Application for Mobile Network Enhanced Logic 
CAP CAMEL Application Part 
CCITT The International Telegraph & Telephone Consultative Committee 
CS-1 Capability Set One  
CS-2 Capability Set Two 
CUSF Call Unrelated Service Function 
FE Functional Entity 
FEAM Functional Entity Access Manager 
INAP      Intelligent Network Application Protocol 
ITU-T International Telecommunication Union (formerly CCITT) 
MACF Multiple Association Control Function 
MTP Message Transfer Part 
SACF Single Association Control Function 
SCCP Signaling Connection Control Part 
SCF Service Control Function 
SCP Service Control Point 
SRF Specialized Resource Function 
SSF Service Switching Function 
TCAP Transaction Capabilities Application Part 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
9 
1.3 Related Documentation 
[Ref 1]  ETS 300 374-1  - ETSI Intelligent Network CS1 Specification 
[Ref 2]  X.208  - Specification of Abstract Syntax Notation One (ASN.1) 
[Ref 3]  X.209  - Basic Encoding Rules for Abstract Syntax Notation One 
(ASN.1) 
[Ref 4]  Q.773  - SS7 Transaction Capabilities Formats and Encoding 
[Ref 5]  U06SSS - TCAP Programmer's Manual 
[Ref 6]  U10SSS - Software Environment Programmer’s Manual 
[Ref 7]  X.680  - Specification of Abstract Syntax Notation One (ASN.1) 
[Ref 8]  X.690  - Basic Encoding Rules for Abstract Syntax Notation One 
(ASN.1) 
[Ref 9]  Q.1218 - ITU-T Interface Recommendation for Intelligent Networks 
CS-1 
[Ref 10]  TS 101 046 v5.6.0 – CAMEL Application Part specification v1 
[Ref 11]  TS 101 046 v6.3.0 - CAMEL Application Part specification v2 
[Ref 12]  TS 129 078 v4.6.0 – CAMEL Application Part specification v3 
[Ref 13]  3GGP TS 29.078 v7.1.0 (2005-09) - CAMEL Application Part 
Specification v.4 
[Ref 14]  3GGP TS 29.278 v7.0.0 (2005-12) - CAMEL Application Part 4 IP 
Multimedia Subsystems (IMS) v.4 
[Ref 15]  EN 301 140-1 – ETSI Intelligent Network CS2 Specification 
[Ref 16]  GR-1299-CORE – AIN Specification, issue 7  
[Ref 17]  Q.1228 - ITU-T Interface Recommendation for Intelligent Networks 
CS-2   
1.4 Feature Overview 
Key features of the INAP module include: 
• Eases IN application development by providing simple access to 
communication between IN functional entities. 
• Functional Entity independent solution. 
• Supports communication functions required at the SCF, SSF, SRF and 
CUSF Functional Entities. 
• Implements the Single Association Control Function (SACF) specified in 
the ITU Q.1218 and ETSI ETS 300 374-1 specifications. 
• INAP module provides service independent access to the SS7 
environment. 
• Procedural API provides a convenient means of accessing the INAP 
module. Provides tailored suites of Application Service Elements (suites of 
INAP operations) to support the required IN functions.  
• The supported ASEs may be readily extended to support any network or 
operator specific IN functions. 
1 About this Publication 
10 
• Full user control of dialogues via message oriented or procedural (API) 
interface. 
• Support for application context negotiation. 
• Support for ITU, ETSI and CAMEL protocol stacks. 
• Support for a subset of the AIN protocol stack GR-1299-CORE (AINGR). 
• Error handling for Class 1, 2, 3, and 4 operations. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
2 General Description 
2.1 Module Overview 
The module provides an implementation of the Single Association Control 
Function (SACF) block of an IN Functional Entity. The figure below shows the 
various components at a SCP functional entity but the module itself is FE 
independent. It may provide services to applications implementing the 
functions of the SCF, SSF and SRF Functional Entities.  It may also support 
services to multiple FEs located at the same node. The ASEs can be 
implemented using the INAP API suite. Other modules in the Dialogic® SS7 
Protocol stack can be used to implement the SCCP, TCAP and MTP layers. 
Figure 1. INAP at an SCP 
SCF 
SCCP 
MTP1-3 
ASE(s) 
[INAP API suite] 
TCAP 
SACF 
[INAP Module] 
SS7 link SS7 link 
SCP 
 
The module is event driven. It has a single input queue into which messages 
from other modules (TCAP, INAP-User, management etc.) are written. The 
module processes each message in turn until the input queue is empty, in 
which case it will do nothing until the next event is received. Output from the 
module is directed depending on the type of event to the TCAP module, the 
INAP User module, the Management module or the Maintenance module. 
11 
2 General Description 
12 
The Intelligent Network Application Protocol (INAP) is specified in terms of 
operations that are "invoked" at the serving FE by the requesting FE. See 
[Ref 9] on page 9. These operations are invoked within the context of a 
"dialogue" between the two FEs.  
The INAP module provides the user with a primitive interface for INAP 
dialogue control and for INAP service requests. The service request primitives 
contain INAP operations coded as TCAP components ([Ref 4] on page 9) for 
transmission via INAP dialogues.  
The INAP module is supplied with an API function library containing a 
procedural interface for the INAP module. This consists of a suite of API 
functions for dialogue control and IN operation handling.  
The API suite includes functions for the encoding and recovery of IN 
operations and associated parameters. The operations are coded as TCAP 
components using the Basic Encoding Rules of the Abstract Syntax Notation 
1, see [Ref 3] on page 9.  This is the format required by the INAP module. 
Certain other parameters are also built into the INAP service request message 
by the coding function. 
If the user already has access to the ASN.1 encoded version of the 
component the INAP module may be accessed directly via the primitive 
interface.  
The API functions suite may be used with different variants of the INAP 
protocol. The required protocol handling is specified via internal coding tables. 
The user indicates the required protocol at run time. The INAP module is 
protocol independent. This approach allows new variants to be made available 
in minimum time.  
2.2 INAP Functional Entity Addressing 
When opening a dialogue with a remote FE the User Application must provide 
the SCCP address of the local and remote FEs in the SS7 network. 
The User Application may provide the full SCCP address explicitly in each 
dialogue message or alternatively, the INAP module provides a number of 
Functional Entity records which once configured allow the User Application to 
address Functional Entities using a locally defined reference code. This 
feature also permits the INAP module to support more than one local 
Functional Entity. For example an SCF and an SRF may be supported on the 
same SS7 stack. The FE record for each local FE should be configured with 
the module id of the user application implementing the procedures of that FE.  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
13 
2.3 INAP Application Context Handling 
ITU-T and ETSI INAP specifications include the use of Application Context to 
identify the "context" of a particular dialogue between two IN Functional 
Entities. Application Context negotiation is required when a dialogue is 
established between two IN Functional Entities. If the FE receiving the 
dialogue request cannot support the requested context the dialogue is 
aborted.   
The INAP module is able to perform application context negotiation once the 
supported contexts are configured. This can be done automatically using the 
API interface. The API user handles Application Contexts using defined 
interface codes. 
Alternatively the INAP module may be configured to transparently pass raw 
Application Context data to the User permitting the User Application to 
perform context negotiation if required. This transparent Application Context 
handling option can also be used to support interworking with some 
proprietary INAP implementations that do not make use of Application 
Contexts. 
2.4 Module Dimensions 
Internally there are a number of data structures used by the module.  
The maximum dimensions of these structures are determined by compile time 
constants. The constants of importance to the user are: 
• The maximum number of IN Functional Entities supported by the module 
(32 for all assemblies). 
• The maximum number of Application Contexts supported by the module 
(32 for all assemblies). 
• The maximum number of simultaneous dialogues supported by the 
module. 
• The maximum number of simultaneous invocations supported by the 
module. 
 Host based (Linux, 
Windows®, Solaris) SS7SIU520 SS7G21 SS7G22 SS7HDP SS7HDC 
Maximum number 
of dialogues 
supported 
65535 16384 65535 0, 8192 or 32768 
(depending on run- 
time license) 
Maximum number 
of invokes 
supported 
65535 16384 65535 0, 8192 or 32768 
(depending on run- 
time license) 
2.5 Module Requirements 
The module requires a periodic timer tick notification to be issued via the 
input queue. Typically this is required every tenth of a second. This can either 
be generated by a timer module or using the services of the selected 
operating system. 
2 General Description 
14 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
15 
3 INAP Module User Interface 
3.1 Introduction 
The INAP module is event driven. 
The INAP module - User interface is message based and uses the following 
message types: 
Message Type Value Usage 
INAP-SERVICE-REQ 0xc7f0 Used to invoke an operation at a remote Functional Entity. 
Also to respond to operation invocation requests from 
remote Functional Entities. 
INAP-SERVICE-IND 0x87f1 Used to receive the results or errors arising from 
operations invoked at remote Functional Entities. Also to 
receive operation invocation requests from remote 
Functional Entities. 
INAP-DIALOGUE-REQ 0xc7f2 Used to issue dialogue commands to the INAP module. 
INAP-DIALOGUE-IND 0x87f3 Used to receive dialogue events from the INAP module. 
User dialogue commands are passed by sending command primitives in the 
dialogue request messages outlined above. 
User operations are sent to the network using the service request messages 
outlined above. The required operation and associated parameters are 
supplied coded as a TCAP component ([Ref 4] on page 9) following the basic 
ASN.1 encoding rules ([Ref 3] on page 9). It is recommended that the user 
make use of the suite of API functions for the coding and decoding of INAP 
operations, see Chapter 4: Functional API User Interface on page 33. 
The message must be contained in a single buffer allocated by the sending 
module. The suite of API functions includes functions for the allocation and 
transmission of these message buffers.  
Each INAP primitive includes a number of parameters. These parameters are 
conveyed in the parameter area of the message buffer. 
3 INAP Module User Interface 
16 
3.2 Dialog Primitive Types 
Dialogue handling primitives provide the mechanism by which dialogues are 
established and maintained with remote Functional Entities. 
Dialogue primitives are sent by the INAP User in an INAP-DIALOGUE-REQ 
message.  These convey a dialogue request or response: 
Primitive Value Usage 
INAP-OPEN-REQ 0x1 Used to open a dialogue. The INAP module assigns 
resources for the dialogue and awaits any INAP operations 
the user wishes to open the dialogue with. 
INAP-CLOSE-REQ 0x2 Basic End: Used to indicate that any operations supplied 
should now be transmitted to the remote FE. The dialogue is 
then terminated. 
Pre Arranged End: Used to indicate that the dialogue may be 
terminated locally when any active invocations have 
completed. Any pending components sent to the INAP 
module will be discarded. The INAP module will issue a 
Close Indication when the dialogue is terminated.  
INAP-DELIMIT-REQ 0x3 Used to indicate that any components supplied should now 
be transmitted to the remote FE. The dialogue remains open. 
INAP-U-ABORT-REQ 0x4 Used to indicate that the user wishes to abort this dialogue. 
Any outstanding components are discarded. 
INAP-OPEN-RSP 0x81 Used to accept or reject a dialogue request from a remote 
FE. 
Under some network configurations, it may be desirable to change the local 
and remote addresses that INAP uses for a particular dialogue after the Open 
has been received. The INAP module allows the user to specify a new set of 
origination and destination addresses within the Open-Response (or U_Abort 
if appropriate). These addresses will be used for the remainder of the 
dialogue. The value of INAPPN_dest_address will become the new remote 
address and the INAPPN_orig_address will become the new local address 
which will be used in messages sent to TCAP. 
The current TCAP specifications only allow for the local address of the 
responding end of a dialogue to be changed; therefore, end-to-end support 
for changing additional addresses may depend on functionality offered at 
other nodes. 
Where the INAP module started a dialogue, it accepts new local and remote 
addresses and uses them for the rest of the dialogue. This means that the 
INAP module supports the functionality to act at both ends of a dialogue 
where the addresses have changed.  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
17 
Dialogue primitives sent by the INAP module in an INAP-DIALOGUE-IND 
message.  These convey a dialogue indication or confirmation: 
Primitive Value Usage 
INAP-OPEN-IND 0x1 Used to indicate a dialogue request from a remote FE. The 
user may subsequently receive service indication messages 
bearing components.  
INAP-CLOSE-IND 0x2 Used to indicate that all the components received have 
been issued to the user. The dialogue is terminated. 
INAP-DELIMITER-IND 0x3 Used to indicate that all the components received have 
been sent to the user. The dialogue remains open.  
INAP-OPEN-CNF 0x81 Used to indicate that the remote FE has accepted the user’s 
dialogue request. 
INAP-U-ABORT-IND 0x4 Used to indicate that the remote user has aborted the 
dialogue. Any outstanding components have been 
discarded. 
INAP-P-ABORT-IND 0x5 Used to indicate that the dialogue has been aborted 
because of a network error. Any outstanding components 
have been discarded. 
INAP-NOTICE-IND 0x6 Used to indicate that an abnormal component was detected. 
3.3 Service Component Primitives 
Service Component Request primitives convey coded INAP operations to the 
INAP module. The primitive type indicates the nature of the component. 
Primitive Value Usage 
INAP-INVOKE-REQ 0x1 Used by the user application to request an operation 
invocation. 
INAP-RESULT-REQ 0x2 Used by the user application to provide the successful result 
of an operation invocation. 
INAP-ERROR-REQ 0x3 Used by the user application to provide the unsuccessful 
result of an operation invocation.  
INAP-REJECT-REQ 0x4 Used by an API decode function to indicate a "provider" 
problem. This occurs if the decode function is unable to 
decode the received component.  
Service Component Indication primitives convey coded INAP operations to the 
user. The primitive type indicates the nature of the component. 
Primitive Value Usage 
INAP-INVOKE-IND 0x1 Used by the INAP module to convey an operation invocation 
to the user application. 
INAP-RESULT-IND 0x2 Used by the INAP module to convey the successful result of 
an operation previously invoked by the user. 
INAP-ERROR-IND 0x3 Used by the INAP module to convey the unsuccessful result 
of an operation previously invoked by the user.  
3 INAP Module User Interface 
18 
3.4 INAP Dialogue Request Message 
Synopsis 
Message sent from the User to the INAP module containing a dialogue 
request primitive. 
Message Format 
Message Header 
FIELD NAME MEANING 
type INAP_MSG_DLG_REQ (0xc7f2) 
id dialogue_ID 
src Sending module_id 
dst INAP_MODULE_ID 
rsp_req 0 
hclass 0 
status 0 
err_info 0 
len Number of bytes of user data 
H 
Parameter Area 
Offset Size Name 
0 1 Dialogue primitive type octet. 
1 len - 2 Parameters in Name-Length-Data format. 
len - 1 1 Set to zero indicating end of message. 
Description 
This message is used by the User to send dialogue primitives to the INAP 
module. All dialogue primitives contain a dialogue ID which is encoded in the 
message header. It does not form part of the parameter area. It must be 
provided by the User with the INAP-OPEN-REQ primitive and used in the 
message header of all subsequent dialogue primitives associated with that 
dialogue. Operation invocations, results and errors are also associated with a 
particular dialogue using this dialogue ID. 
See Section 3.2 Dialog Primitive Types on page 16 for details of primitive 
usage.  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
19 
Parameter Area Contents 
The following table lists the parameters associated with each dialogue request 
primitive.  
 INAP Primitive 
Parameter OPEN- 
REQ CLOSE–REQ DELIMITER-REQ U-ABORT-REQ OPEN-RSP 
Destination 
address A    O 
Originating 
address B    O 
Destination 
reference A     
Originating 
reference B     
Result     M 
Refuse reason     O 
Release method  M    
User reason    M  
Application 
context name O O O O O 
Application 
context index C   O  
User Information  O O O  
NC O     
Key 
Symbol Description 
M Mandatory The message will be discarded if the corresponding parameter is 
omitted 
O Optional The parameter is not essential 
A Exclusive OR One of the parameters marked A must be included. 
B Exclusive OR One of the parameters marked B must be included. 
C Conditional The parameter marked C must be included if Application Context 
negotiation is enabled i.e., if the INAP_MSG_CNF_AC message 
has been issued at least once.  
3 INAP Module User Interface 
20 
3.5 INAP Dialogue Indication Message 
Synopsis 
Dialogue event indication message sent from the INAP module to the user. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_DLG_IND (0x87f3) 
id Dialogue_ID 
src INAP_MODULE_ID 
dst User module_id 
rsp_req 0 
hclass 0 
status 0 
err_info 0 
len Number of bytes of user data 
 
Parameter Area 
Offset Size  Name 
0 1 Dialogue primitive type octet. 
1 len - 2 Parameters in Name-Length-Data format. 
len – 1 1 Set to zero indicating end of message. 
Description 
This message is used by the INAP module to indicate dialogue events to the 
User application.  
All protocol messages must contain the dialogue ID of the dialogue to which 
they refer. This is encoded in the message header. The INAP module assigns 
the dialogue id for an incoming dialogue request (OPEN IND primitive). 
See Section 3.2 Dialog Primitive Types on page 16 for details of dialogue 
primitive usage.  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
21 
The following table lists the parameters associated with each dialogue 
indication primitive: 
 INAP Primitive 
Parameter OPEN– 
IND CLOSE–IND DELIMITER-IND U-ABORT-IND P-ABORT-IND OPEN-CNF NOTICE-IND 
Destination 
address A     O  
Originating 
address B     O  
Destination 
reference A       
Originating 
reference B       
Result      M  
Refuse reason      O  
User reason    M    
Provider reason     M   
Application 
context name O O O O  O  
Application 
context index C     O  
Source     M   
Problem 
diagnostic       M 
Release confirm  O      
Report Cause       O 
User Information O O O O    
NC O       
Key 
Symbol Description 
M Mandatory The parameter will always be included in the message 
O Optional The parameter may or may not be included in the message 
depending on the circumstances in which the message is sent. 
A Exclusive OR One of the parameters marked A must be included. 
B Exclusive OR One of the parameters marked B must be included. 
C Conditional The parameter marked C must be included if Application Context 
negotiation is enabled i.e., if the INAP_MSG_CNF_AC message 
has been issued at least once.  
3 INAP Module User Interface 
22 
3.6 INAP Dialogue Primitive Parameters 
The following parameter names are defined for use in dialogue primitive 
messages: 
Parameter Mnemonic Value (dec) Value (hex) 
Destination address INAPPN_dest_address 1 0x01 
Originating address INAPPN_orig_address 3 0x03 
Result INAPPN_result 5 0x05 
Refuse reason INAPPN_refuse_rsn 6 0x06 
Release method INAPPN_release_method 7 0x07 
User reason INAPPN_user_rsn 8 0x08 
Provider reason INAPPN_prov_rsn 9 0x09 
User Information INAPPN_user_info 10 0x0a 
Application context name INAPPN_applic_context 11 0x0b 
Source INAPPN_source 12 0x0c 
Problem diagnostic INAPPN_prob_diag 13 0x0d 
Destination FE code INAPPN_dest_FE 14 0x0e 
Originating FE code INAPPN_orig_FE 15 0x0f 
Application context index INAPPN_ac_reference 27 0x1b 
Release confirm INAPPN_release_confirm 28 0x1c 
Report Cause INAPPN_report_cause 30 0x1e 
Network Context INAPPN_nc 31 0x1f 
The coding for each parameter type is given in the following tables: 
Parameter name INAPPN_dest_address 
Parameter length Variable, in the range 2 to 18 
Parameter data SCCP address of the FE with which the dialogue is required. 
Destination address parameter encoded in the format expected by the 
network layer (e.g.  when using SCCP, in accordance with Q.713 definition 
of “Called party address”, starting with the address indicator and 
containing, optionally, signaling point code, subsystem number and global 
title). 
 
Parameter name INAPPN_dest_FE 
Parameter length Fixed, set to two octets. 
Parameter data User defined reference code for the destination Functional Entity for this 
dialogue. The User must previously have issued a Functional Entity 
configuration request message for this FE. See Section 5.4 INAP 
Functional Entity Configuration Request on page 63. 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
23 
Parameter name INAPPN_orig_address 
Parameter length Variable, in the range 2 to 18 
Parameter data SCCP address of the FE requesting the dialogue. 
Origination address parameter encoded in the format expected by the 
network layer (e.g. when using SCCP, in accordance with Q.713 definition 
of “Called party address”, starting with the address indicator and 
containing, optionally, signaling point code and global title). 
 
Parameter name INAPPN_orig_FE 
Parameter length Fixed, set to two octets. 
Parameter data User defined code for the originating Functional Entity for this dialogue. 
The User must previously have issued a Functional Entity configuration 
request message for this FE. Section 5.4 INAP Functional Entity 
Configuration Request on page 63. 
 
Parameter name INAPPN_result 
Parameter length Fixed, set to one octet 
Parameter data Indicates whether the remote FE accepts the dialogue request from the 
user or not. 
• 0 – dialogue accepted 
• 1 – dialogue refused 
 
Parameter name INAPPN_refuse_rsn 
Parameter length Fixed, set to one octet 
Parameter data When a remote FE refuses a dialogue request from the user a reason may 
be provided. 
Single octet coded as follows:  
• 0 - no reason given 
• 3 – application context not supported 
• 4 – potential version incompatibility 
 
Parameter name INAPPN_release_confirm 
Parameter length Fixed, set to one octet 
Parameter data Allows the user to distinguish between a normal “basic” or “pre-arranged” 
termination of a dialogue. If this parameter is not present, then a normal 
release should be assumed.  
• 0 – normal release indication. The dialogue has been closed by the 
remote system.  
• 1 – release confirm indication. The indication is generated to confirm 
that the dialogue has been closed using a pre-arranged end. All 
operations have been completed or have timed-out.  
 
3 INAP Module User Interface 
24 
Parameter name INAPPN_release_method 
Parameter length Fixed, set to one octet 
Parameter data Allows the user to select “basic” or “pre-arranged” termination of a 
dialogue.   
• 0 – normal release. The INAP module issues a dialogue termination 
message to the remote system. May be used to transfer components to 
the remote system. User application dialogue resources may be 
released immediately.  
• 1 – prearranged end. Used where the IN specifications allow the 
dialogue to be terminated locally without sending a dialogue 
termination message to the remote system. If the INAP module is 
awaiting responses (errors or results) for any active Class 1, 2 or 3 
operation invocations, the INAP module will maintain the dialogue until 
the internal operation timers have expired or the responses received. 
Once all the operations have completed the INAP module will issue a 
Close Indication primitive. User application dialogue resources may 
then be released.   
 
Parameter name INAPPN_user_info 
Parameter length Variable (subject to satisfying message length limits). 
Parameter data User information encoded as an X.208 EXTERNAL, commencing with the 
EXTERNAL tag. 
This formatting is not required when the User Information is carried in a 
User Abort primitive. Any format may be used in this case. 
 
Parameter name INAPPN_user_rsn 
Parameter length Fixed, set to one octet 
Parameter data Allows the user to provide an abort cause when aborting a dialogue.  
Single octet coded as follows:  
• 0 - User specific reason 
• 6 - Application Context not supported 
 
Parameter name INAPPN_prov_rsn 
Parameter length Fixed, set to one octet 
Parameter data Provides the user with an abort cause when the network aborts a dialogue. 
• 0 – provider malfunction 
• 1 – supporting dialogue/transaction released 
• 2 – resource limitation 
• 3 – maintenance activity 
• 4 – version incompatibility 
• 5 – abnormal INAP dialogue 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
25 
Parameter name INAPPN_source 
Parameter length Fixed, set to one octet 
Parameter data Used to indicate the source of the abort in a provider abort primitive.  
• 0 – INAP problem 
• 1 - TC problem 
• 2 – network service problem 
 
Parameter name INAPPN_applic_context 
Parameter length Variable up to 32. 
Parameter data This parameter is only used when the module has been configured for 
"transparent AC operation" using the module configuration message. 
The Application context as received or transmitted with this dialogue. May 
be used to supply an alternative context when used with the U-ABORT 
primitive. 
Encoded as specified in Q.773 commencing with the Object Identifier 
Name tag. 
 
Parameter name INAPPN_ac_reference 
Parameter length Variable, in the range 1 to 2 
Parameter data The index specifying the Application context for use with this dialogue. The 
module must previously have been configured with supported contexts and 
associated references using the Configure AC message. See Section 5.5 
INAP Application Context Configuration Request on page 65. 
May be used to supply an alternative context when used with the U- 
ABORT primitive. 
 
Parameter name INAPPN_prob_diag 
Parameter length Fixed, set to one octet 
Parameter data Used to indicate unexpected events that are not related to an active 
operation invocation.  
• 0 – abnormal event detected by peer 
• 1 – response rejected by peer 
• 2 – abnormal event received from peer 
• 3 – abnormal network report cause 
 
Parameter name INAPPN_report_cause 
Parameter length Fixed, set to 1 
Parameter data Values as defined in Q.713 Return cause 
 
Parameter name INAPPN_nc 
Parameter length Variable, typically 1. Length of zero indicates Network Context is unknown. 
Parameter data Network Context identifier. 
If the default NC is being used then this parameter is optional. If present, it 
should have a value of 0. For other Network Contexts it should match the 
value defined in the relevant INP_MSG_NC_CONFIG message. 
3 INAP Module User Interface 
26 
3.7 INAP Service Request Message 
Synopsis 
Protocol message sent from the User to the INAP module containing a single 
INAP operation invocation, result or error. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_SRV_REQ (0xc7f0) 
id Dialogue_ID 
src Sending module_id 
dst INAP_TASK_ID 
rsp_req 0 
hclass 0 
status 0 
err_info 0 
len Number of bytes of user data 
 
Parameter Area 
Offset Size  Name 
0 1 Component Type octet. 
1 len – 2 Parameters in Name-Length-Data format. 
len – 1 1 Set to zero indicating end of message. 
Description 
This message allows the user to send INAP operation invoke, result and error 
components to a remote Functional Entity via an open dialogue. It is also 
used to issue problem codes relating to received components.  
The User's components are formatted as a TCAP component following the 
basic ASN.1 encoding rules. 
All service request messages must contain the dialogue ID of the dialogue to 
which they belong. This is encoded in the message header and does not form 
part of the parameter area. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
27 
The following parameters are defined for use in service request messages: 
 Component Type 
Parameter INVOKE- 
REQ RESULT-REQ ERROR-REQ REJECT-REQ 
Invoke ID M M M M 
Linked ID O    
Component M M M  
Op code M    
Parent Ind O    
Class M    
Timeout M    
Problem code    M 
Quality Of Service O    
Key 
Symbol Description 
M Mandatory The message will be discarded if the corresponding parameter is 
omitted 
O Optional The parameter is not essential 
3.8 INAP Service Indication Message 
Synopsis 
Protocol message sent from the INAP module to the user containing a 
received operation invoke, result or error component. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_SRV_IND (0x87f1) 
id Dialogue_ID 
src INAP_TASK_ID 
dst User module_id 
rsp_req 0 
hclass 0 
status 0 
err_info 0 
len Number of bytes of user data 
 
3 INAP Module User Interface 
28 
Parameter Area 
Offset Size  Name 
0 1 Component Type octet. 
1 Len - 2 Parameters in Name-Length-Data format. 
len – 1 1 Set to zero indicating end of message. 
Description 
The INAP module uses this message to send received INAP operation invoke, 
result and error components to the User. 
The received components are formatted as a TCAP component following the 
basic ASN.1 encoding rules. 
All service indication messages must contain the dialogue ID of the dialogue 
to which they belong. This is encoded in the message header and does not 
form part of the parameter area. 
The following parameters are defined for use in service indication messages: 
 Component Type 
Parameter INVOKE-IND RESULT-IND ERROR-IND 
Application context index C   
Component M M A 
Invoke ID M M M 
Linked ID O   
Linked Op code O M M 
Provider Error   A 
Key 
Symbol Description 
M Mandatory The parameter will always be included in the message. 
O Optional The parameter may or may not be included in the message 
depending on the circumstances in which the message is sent. 
C Conditional The parameter will be included in the message if Application 
Context negotiation is enabled, i.e. at least one 
INAP_MSG_CNF_AC message has been issued. 
A Exclusive OR One of the parameters marked A will always be included in the 
message. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
29 
3.9 INAP Service Primitive Parameters 
The following parameter names are defined for use in service primitive 
messages: 
Parameter Mnemonic Value (dec) Value (hex) 
Invoke ID INAPPN_invoke_id 16 0x10 
Linked ID INAPPN_linked_id 17 0x11 
Component INAPPN_component 18 0x12 
Class INAPPN_class 19 0x13 
Timeout INAPPN_timeout 20 0x14 
Op code INAPPN_op_code 21 0x15 
Linked Op code INAPPN_linked_op_code 22 0x16 
Problem code INAPPN_problem_code 23 0x17 
Parent Ind INAPPN_parent_ind 24 0x18 
Provider Error INAPPN_provider_error 25 0x19 
MTP message priority INAPPN_priority 26 0x1a 
Application context index INAPPN_ac_reference 27 0x1b 
Quality Of Service INAPPN_qos 29 0x1d 
 
Parameter name INAPPN_ac_reference 
Parameter length Variable, in the range 1 to 2 
Parameter data The index specifying the Application Context of the dialogue on which 
the component was received. 
Supplied with invoke components to permit the decoded operation to be 
validated against the context. 
The module must previously have been configured with supported 
contexts and associated references using the Application Context 
configuration message. See Section 5.5 INAP Application Context 
Configuration Request on page 65. 
 
Parameter name INAPPN_invoke_id 
Parameter length Fixed, set to 1 
Parameter data An id associated with every operation invocation. Assigned by the 
invoking user.  
 
Parameter name INAPPN_linked_id 
Parameter length Fixed, set to 1 
Parameter data The invoke id of the parent operation invocation. 
This parameter is only included in linked (child) operation invocations. 
 
3 INAP Module User Interface 
30 
Parameter name INAPPN_component 
Parameter length Variable, 1 to 255 
Parameter data The invoke, result or error component coded in accordance with Q.773 
using the ASN.1 Basic Encoding Rules. Starting with the Component 
type tag. 
 
Parameter name INAPPN_class 
Parameter length Fixed set to 1. 
Parameter data The class of the INAP operation. 
• 1 - Operation has Results and Errors 
• 2 - Operation has Errors only 
• 3 - Operation has Results only 
• 4 - Operation has no Results or Errors 
Where the INAP Operation code and decode functions are used, this 
parameter is supplied automatically 
 
Parameter name INAPPN_timeout 
Parameter length Fixed set to 2. 
Parameter data The TCAP timeout of the INAP operation. 
Specified on a per operation basis in the INAP specifications. Time in 
seconds. 
Where the INAP Operation code and decode functions are used, this 
parameter is supplied by using the API functions. 
 
Parameter name INAPPN_op_code 
Parameter length Fixed set to 1. 
Parameter data The INAP specified Operation Code. 
Supplied by the User in Service Invoke Request messages. The INAP 
module does not examine the contents, storing it for use in Service 
Indication messages relating to this invocation. 
Where the INAP API code and decode functions are used, this 
parameter is supplied automatically. 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
31 
Parameter name INAPPN_linked_op_code 
Parameter length Variable, in the range 1 to 2. 
Parameter data The INAP specified Operation Code. 
Supplied by the INAP module in Service Invoke Indications where the 
operation being invoked is a linked operation. In this case the operation 
code indicates the Parent operation of the linked operation. 
Supplied by the INAP module in Service Result & Error indications to 
indicate the operation to which the result or error refers.  
Where the INAP API code and decode functions are used, this 
parameter is handled automatically. 
 
Parameter name INAPPN_problem_code 
Parameter length Fixed set to 1. 
Parameter data Used by the User application to indicate a problem with a received 
component to the INAP module. The value of this parameter is a defined 
interface code. It does not correlate exactly with the TCAP reject 
component problem code. 
Where a INAP API decode function is used, this parameter is placed in 
the reject component automatically. 
• 1: Mistyped Parameter - The User application was unable to decode 
the received component. 
• 2: Unrecognized OP - The User application has decoded an 
operation that is not supported. 
• 3: Unrecognized Error - The User application has decoded an error 
that is not supported or not applicable to the operation invoked. 
 
Parameter name INAPPN_parent_ind 
Parameter length Fixed set to 1. 
Parameter data Used by the User application to indicate to the INAP module that the 
operation being invoked has defined linked operations. This allows the 
INAP module to reject inappropriate received linked operation 
invocations. 
• 0: The operation being invoked does not have any specified linked 
operations. 
• 1: The operation being invoked has specified linked operations.  
If this parameter is omitted it is assumed the operation being invoked 
does not have specified linked operations. 
Where the INAP API code functions are used, this parameter is supplied 
automatically if the operation is able to be a parent of a linked operation. 
 
3 INAP Module User Interface 
32 
Parameter name INAPPN_provider_error 
Parameter length Fixed set to 1. 
Parameter data Used by the INAP module to indicate a negative response to an 
operation invocation requested by the User application for network 
reasons. 
• 1: Duplicate Invoke ID - The user provided Invoke id for the 
invocation request collided with the invoke id of an existing 
invocation at the remote system. 
• 2: Unrecognized OP - The operation requested is not supported at 
the remote system. 
• 3: Mistyped Parameter - The remote system was unable to decode 
the operation invocation. 
• 4: Unrecognized Linked ID - The remote system did not have an 
active invocation matching the linked id. 
• 5: Linked Response Unexpected - The remote system was not 
expecting the linked response. 
• 6: Unexpected Linked Operation - The remote system was not 
expecting the linked operation invocation. 
• 7: Initiating Release - The remote system was unable to accept the 
operation invocation because the dialogue was being released. 
• 8: Resource Limitation - The remote system was unable to accept 
the operation invocation due to resource limitations. 
• 9: No response from peer - The operation invoked by the User 
application has timed out without a response being received. 
• 10: Invalid Response from peer - A response to an operation invoked 
by the User application was received. The response could not be 
decoded. 
• 11: Service Completion Failure - An expected response from the 
remote system was not received. 
 
Parameter name INAPPN_priority 
Parameter length Fixed set to 1. 
Parameter data Used by the User application to indicate the MTP message priority for 
the SS7 message resulting from the operation invocation. 
Used only in ANSI mode. See Section 5.1 INAP Configuration Request 
on page 57 
Where the INAP API code and decode functions are used, this 
parameter is supplied automatically. 
 
Parameter name INAPPN_qos 
Parameter length Fixed, set to 1 
Parameter data The octet is an indicator octet. The coding is as follows: 
• bit 0 - Set to 1 if the Return Option is selected. 
• bit 1 - Set to 1 if Sequence Control is required. 
All other bits are reserved for future use and must be set to zero. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
33 
4 Functional API User Interface 
4.1 Introduction 
The INAP module provides the means for transmitting INAP operations 
between Functional Entities. The module requires the INAP operations coded 
as a TCAP component ([Ref 4] on page 9), following the basic ASN.1 
encoding rules ([Ref 3] on page 9).  
A suite of API functions is supplied to provide a convenient way to build and 
recover the INAP module messages. The API functions also provide the 
coding and de-coding of INAP operations and their parameters as TCAP 
components.  
The API interface is entirely procedural. The user application need not be 
aware of the data structures used to handle the dialogue primitives and 
service requests. 
The suite of API functions provides the following features: 
• Message buffer allocation and de-allocation. 
• Dialogue handling.  
• IN service handling. 
• Generic Parameter handling.  
• Component code and decode. 
• Ability to send and receive user extensions to operations. 
The API suite of functions is generic to all INAP services.  INAP operations 
and associated parameters are identified using API interface codes that are 
defined in the API header file “in_inc.h”.  
The user places INAP operations and associated parameters in a "component 
structure". The type definition of this component structure is available to the 
user, permitting the user to create instances of it as required. However, the 
API functions conceal the internal contents of the structure from the user 
application. 
API functions are used to obtain an inter-process message structure.  
An API coding function is then used to build an INAP Service Request 
message in this message structure using the contents of the component 
structure. The INAP operation and associated parameters placed in the 
component structure by the user application are coded using the Basic 
Encoding Rules of ASN.1 see [Ref 3] on page 9. 
An API function can then be used to send the message structure to the INAP 
module. 
Operation results and errors are handled in a similar way.   
API function suites are available for the ETSI, ITU, CAMEL and AIN standards 
for INAP.  
4 Functional API User Interface 
34 
4.2 API Function Specifications 
The functions of the API interface are listed below. Function parameters are 
identified as well as any return values. 
Message Buffer Handling 
API Functions Parameters Return Value Usage 
IN_alloc_message() alloc_options1 msg Allocate message buffers 
The type of the message buffer 
pointer is “HDR *” 
IN_free_message() msg  status De-allocates message buffers 
IN_send_message() user_id 
inap_id 
msg  
status Sends message buffer to INAP 
module.  
 
Message Buffer Handling 
API Functions Parameters Return Value Usage 
IN_init_component() prot_spec 
cpt 
init_options1 
 
status Initialize the component buffer. The 
user application is free to create 
instances of the component buffer as 
required.  
This function should be used to 
initialize the component structure for 
use with a protocol specified by the 
prot_spec variable. It must be called 
before using a cpt structure for 
coding or decoding 
 
Build Dialogue Request 
API Functions Parameters Return Value Usage 
IN_set_dialogue_param() param_name  
len 
data_ptr  
msg  
status Sets parameter “param_name” in the 
“msg” message structure. Copies 
“len” octets of parameter data from 
the “data_ptr”  
The available “param_names” are 
defined in the in_inc.h header file. 
IN_dialogue_open() dlg_id 
msg  
status Builds an OPEN dialogue primitive in 
the given message structure. 
Parameters already present in the 
message structure are verified for the 
OPEN action. 
IN_dialogue_close() dlg_id 
msg  
status Builds a CLOSE dialogue primitive in 
the given message structure. 
Parameters already present in the 
message structure are verified for the 
CLOSE action. 
IN_dialogue_delimit() dlg_id 
msg  
status Builds a DELIMIT dialogue primitive 
in the given message structure. 
No parameters are required for this 
action. 
                                                 
1 
 This parameter is only defined when the code is compiled with a #define of IN_LMSGS and the library is implemented as a 
shared object. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
35 
Build Dialogue Request 
API Functions Parameters Return Value Usage 
IN_dialogue_u_abort() dlg_id 
msg  
status Builds a U-ABORT dialogue primitive 
in the given message structure. 
Parameters already present in the 
message structure are verified for the 
U-ABORT action. 
IN_dialogue_open_rsp () dlg_id 
msg  
status Builds an Open Response dialogue 
primitive in the given message 
structure. 
Parameters already present in the 
message structure are verified for the 
Open Response action. 
 
Read Dialogue Request  
API Functions 
Parameters Return 
Value Usage 
IN_get_dialogue_type() msg  
dlg_type_ptr 
status Used where the user application 
needs to determine type of dialogue 
in received message.  
The available “Dialogue type codes” 
are defined in the in_inc.h header 
file. 
 IN_get_dialogue_param() param_name  
param_len  
data_ptr   
max_len  
msg  
status  Retrieves parameter “param_name” 
from the “msg” message structure.  
Copies received parameter data to 
“data_ptr” and sets “param_len” to 
the number of bytes copied. 
 
Build Operation in 
Component Buffer  
API Functions 
Parameters Return 
Value Usage 
IN_set_operation() op_name 
timeout   
cpt  
status Used to place the required operation 
code into the component structure.  
See also Note A on page 36. 
IN_set_error() error_op  
err_name   
cpt  
status Used to place the required error 
code into the component structure.  
See also Note A on page 36. 
IN_set_result() result_op  
cpt 
status Used to set the operation code that 
triggered the result.   
See also Note A on page 36. 
IN_set_component_param() param_name 
len  
data_ptr   
cpt  
status  Used to place the required 
parameter into the component 
structure.   
See also Note A on page 36. 
4 Functional API User Interface 
36 
Note A: An error status is returned if the parameter, operation or error is invalid or is too 
large for the component structure. However, it is not necessary to check the 
status after setting each parameter. The first error to occur is recorded in the 
component structure and may be obtained using the function 
IN_get_component_first_error(). The functions IN_code_operation_invoke(), 
IN_code_result() or IN_code_error() will return IN_ERROR_IN_COMPONENT if an 
error is stored in the component structure during an attempt to build an INAP 
message.  
Read Operation from 
Component Buffer  
API Functions 
Parameters Return 
Value Usage 
IN_get_component_first_error() cpt  
error_rsn_ptr 
status  When using API functions to get 
or set operations, errors, results 
and associated parameters to 
and from component structures, 
the return status code of each 
function may be checked 
individually. As an alternative, 
the first function to fail places its 
return code in the component 
structures and this may be 
checked for once the 
component handling is 
complete.  
This function is used to obtain 
this error from the component 
structure. 
IN_get_operation() cpt   
op_name_ptr 
status Used to obtain the value of the 
received operation code. 
IN_get_error() cpt   
err_name_ptr 
status Used to obtain the value of the 
received error code. 
IN_get_component_param() param_name 
param_len 
data_ptr  
max_len   
cpt   
status Used to obtain the received 
parameter from the component 
structure.  
Note: Received parameters of 
ASN.1 NULL type return a 
length of 0 and a status of 
IN_SUCCESS.  
Copies the component 
parameter data to the user data 
area pointed to by "data_ptr". 
Places the number of octets 
copied in the location indicated 
by  “param_len”. "max_len" 
gives the maximum number of 
octets available in the user data 
area.  
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
37 
Code Service Request 
from Component Buffer   
API Functions 
Parameters Return 
Value Usage 
IN_code_operation_invoke()  dlg_id  
cpt   
msg 
status Codes the component in the 
given component structure as an 
invoke component into the given 
message structure.  
IN_code_result() dlg_id  
cpt  
msg  
status Codes the component in the 
given component structure as a 
result component into the given 
message structure. 
IN_code_error() dlg_id   
cpt   
msg   
status Codes the component in the 
given component structure as an 
error component or as a Reject 
component as appropriate for 
the nature of the user error 
parameter. The coded 
component is built into the given 
message structure. 
IN_code_reject() dlg_id   
cpt  
msg   
status Where an API decode function 
returns 
"IN_REJECT_REQUIRED" a 
provider problem has been 
detected. The decode API 
function places the detected 
problem component in the 
component structure. This 
function is used to build a reject 
INAP Service Request message. 
 
De-code Service Indication 
from Component Buffer   
API Functions 
Parameters Return 
Value Usage 
IN_get_component_type() msg  
cpt_type_ptr 
status Used to obtain the component 
type of a received message. 
IN_decode_operation() cpt   
msg   
status The operation and associated 
parameters are decoded from 
the component parameter of the 
received message into the given 
component structure.  
If a provider problem is detected 
during decoding that requires 
the transmission of a reject 
component to the remote system 
this function returns a status of 
"IN_REJECT_REQUIRED". The 
problem code is placed in the 
component structure. This 
component structure should be 
used with the IN_code_reject() 
function to build the required 
reject message, which should 
then be sent to the INAP 
module. 
4 Functional API User Interface 
38 
De-code Service Indication 
from Component Buffer   
API Functions 
Parameters Return 
Value Usage 
IN_decode_result()  cpt  
msg   
status The parameters of the result are 
decoded from the component 
parameter of the received 
message into the given 
component structure.  
Any provider problem detected 
during decoding is handled in 
the same way as during invoke 
component decoding. 
IN_decode_error()  cpt  
msg   
status The error code and associated 
parameters are decoded from 
the component parameter of the 
received message into the given 
component structure.  
Any provider problem detected 
during decoding is handled in 
the same way as during invoke 
component decoding. 
  
API support  
API Functions 
Parameters Return 
Value Usage 
IN_get_prot_spec prot_def prot_spec Returns a pointer to a protocol 
specification. 
This function can be called to 
get a ‘prot_spec’ pointer to pass 
to other IN functions. 
IN_init_applic_contexts  prot_spec 
user_id 
inap_id 
status Issues the Configure Application 
Context messages to the INAP 
module for the contexts 
supported by this API suite.  
This function should be called at 
system start up and whenever 
the INAP module is initialized. 
IN_version maj_rev 
min_rev 
text 
status Used to provide information on 
the version of the API library. 
The text variable will be updated 
to point to the name of the API. 
IN_set_param_length_range prot_spec 
param_name 
length_min 
length_max 
status Used to override the pre-set 
parameter length ranges with 
alternative values. 
This function should be used to 
redefine the default length range 
of protocol parameters. The 
protocol specification to change 
is indicated by the "prot_spec" 
parameter. This will affect all 
components using that protocol 
specification. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
39 
4.3 API Function Parameter Specifications 
The function parameters of the API interface are listed below. Parameter 
types are identified in ‘C’. 
 
Parameter name alloc_options 
Parameter type u32 
Notes Option flags for the IN_alloc_message function. The following flag 
bits are defined.  
• Bit 0 – IN_ALLOC_OPTION_LMSGS – set to indicate if the 
allocated message is to be a large message.  
• All other bits – set to zero. 
 
Parameter name cpt 
Parameter type pointer to IN_CPT 
Notes Pointer to component structure. 
The type of the component buffer pointer is “IN_CPT *" defined in the 
in_inc.h header file.  
The User application should create instances of this as required. 
However the user application need not be aware of the internal 
structure of this type.  
 
Parameter name cpt_type_ptr 
Parameter type pointer to u8  
Notes Pointer to User Application variable into which the interface codes for 
the component type will be placed.  
Value defined in the API header file in_inc.h. 
 
Parameter name data_ptr 
Parameter type u8  
Notes Pointer to the first octet of user data. 
 
Parameter name dlg_id 
Parameter type u16  
Notes User defined id code for the dialogue. The range of dialogue ids 
available to the user is configured in the INAP module configuration 
message. 
 
Parameter name dlg_type_ptr 
Parameter type pointer to u8  
Notes Pointer to User Application variable into which the defined interface 
code for the dialogue type will be placed.  
Value defined in the API header file in_inc.h. 
 
4 Functional API User Interface 
40 
Parameter name err_name 
Parameter type u16 
Notes INAP error code. 
The available error codes are defined in the API header file. 
 
Parameter name err_name_ptr 
Parameter type pointer  to u16  
Notes Pointer to User Application variable into which the code for the 
required INAP error will be placed. 
The available error codes are defined in the API header file. 
 
Parameter name error_op 
Parameter type u16 
Notes Code for the operation whose invocation this error relates to. 
The available operation codes are defined in the API header file and 
have the prefix ‘INOP_’. 
 
Parameter name error_rsn_ptr 
Parameter type pointer to s16  
Notes Pointer to a User Application variable into which the status code 
returned by the first component handling function to fail is placed.  
The available status codes are defined in the API header file. 
 
Parameter name inap_id 
Parameter type u8 
Notes Contains the module id of the INAP module. 
 
Parameter name init_options 
Parameter type u32 
Notes Option flags for the IN_init_component function. The following flag 
bits are defined.  
• Bit 0 – IN_INIT_OPTION_CODE_SHIFT – set to indicate if Code 
Shift is supported (may be generated in INAP)  
• All other bits – set to zero. 
 
Parameter name len 
Parameter type u16 or u8 
Notes Contains length of parameter data in octets. 
 
Parameter name length_min 
Parameter type u16 or u8 
Notes Contains minimum length of parameter data in octets. 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
41 
Parameter name length_max 
Parameter type u16 or u8 
Notes Contains maximum length of parameter data in octets. 
 
Parameter name maj_rev 
Parameter type pointer to u16 
Notes Updated to show the major version number for the API library 
 
Parameter name min_rev 
Parameter type pointer to u16 
Notes Updated to show the minor version number for the API library 
 
Parameter name max_len 
Parameter type u16 or u8 
Notes Specifies the maximum length of parameter buffer data in octets in 
order to prevent overflow. 
 
Parameter name msg 
Parameter type pointer to HDR 
Notes Pointer to an inter process message structure. 
 
Parameter name op_name 
Parameter type u16 
Notes API interface code for the required operation. 
API interface operation codes defined in the API header file. 
 
Parameter name op_name_ptr 
Parameter type pointer to u16 
Notes Pointer to User Application variable into which the API interface code 
for the required operation will be placed. 
API interface operation codes defined in the API header file. 
 
Parameter name param_name 
Parameter type u16  
Notes Values defined in the API header file to identify the parameter.  
When used with the IN_set_dialogue_param() function the available 
parameters are detailed in Section 4.5 API Dialogue Parameters on 
page 53. Dialogue parameters are common to all INAP 
implementations. 
When used with the IN_set_component_param() function the 
available parameters depend on the INAP operation set supported by 
the API supplied. These are detailed in Appendix B on page 77. 
 
4 Functional API User Interface 
42 
Parameter name param_len 
Parameter type pointer to u16 (or pointer to u8) 
Notes Pointer to User Application variable into which the length of the 
recovered parameter is placed. 
 
Parameter name prot_def 
Parameter type u16 
Notes Value to pass to the ‘IN_get_prot_spec’ function to gain a ‘prot_spec’ 
pointer to a given protocol. 
• Use “INETS_300_374_1_PROTOCOL” for coding under ETS 
300 374 1. 
• Use “INEN_301_140_1_PROTOCOL” for coding under EN 301 
140-1. 
• Use “INITU_Q1218_PROTOCOL” for coding under ITU Q.1218. 
• Use “INCAP_V1_PROTOCOL” for coding under CAMEL v1. 
• Use “INCAP_V2_PROTOCOL” for coding under CAMEL v2. 
• Use “INCAP_V3_PROTOCOL” for coding under CAMEL v3. 
• Use “INCAP_V4_PROTOCOL” for coding under CAMEL v4. 
• Use “INCAP_IMS_PROTOCOL” for coding under CAMEL v4 for 
IMS. 
• Use “AINGR_1299_PROTOCOL” for coding under AIN. 
 
Parameter name prot_spec 
Parameter type pointer to void  
Notes Pointer to a pre-defined table specifying protocol definitions for 
parameter length ranges, ASN operation coding, Application Context 
handling and Error codes. 
The user need not be aware of the internal structure used. 
Note: The ‘IN_get_prot_spec’ function is used to define these 
pointers. 
 
Parameter name result_op 
Parameter type u16 
Notes Code for the operation whose invocation this result relates to. 
Value defined in the API header file. 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
43 
Parameter name status 
Parameter type s16 
Notes Code returned by API functions indicating success or failure. 
• 0:  IN_SUCCESS 
• -1: IN_GENERAL_FAILURE   
• -2: IN_INVALID_MESSAGE_HEADER  
• -3: IN_MESSAGE_BUFFER_OVERFLOW 
• -4: N_INVALID_PARAM_ Name   
• -5: IN_INVALID_PARAM_LEN  
• -6: IN_INVALID_OPERATION 
• -7: IN_INVALID_ERROR 
• -8: IN_INVALID_TIMEOUT 
• -9:   IN_INVALID_PROTOCOL_SPEC 
• -10: IN_INVALID_COMPONENT_POINTER 
• -11: IN_ERROR_IN_COMPONENT  
• -12: IN_INVALID_COMPONENT_TYPE 
• -13: IN_COMPONENT_BUFFER_OVERFLOW 
• -14: IN_COMPONENT_CODING_ERROR  
• -15: IN_PARAM_NOT_FOUND 
• -16: IN_PARAM_BUFFER_OVERFLOW 
• -17: IN_APPLIC_CONTEXT_NOT_FOUND 
• -18: IN_APPLIC_CONTEXT_ERROR 
• -19: IN_COMPONENT_NOT_FOUND 
• -20: IN_INVOKE_ID_NOT_FOUND  
• -21: IN_OP_CODE_NOT_FOUND 
• -22: IN_INVALID_LINKED_OPERATION 
• -23: IN_INVALID_OPERATION_CLASS 
• -24: IN_REJECT_REQUIRED  
Values defined in the API header file in_inc.h. 
 
Parameter name text 
Parameter type pointer to char * 
Notes Updated to point to a text name for the API. 
 
Parameter name timeout 
Parameter type u16 
Notes Timeout for the operation invocation.  
If the timeout parameter is set to zero, the longest timeout specified 
for the operation is used.  
If the timeout parameter is set to a duration outside the specified 
range for the operation, the coding function returns an error.  
 
Parameter name user_id 
Parameter type u8 
Notes Contains the module id of the User Application module. 
4 Functional API User Interface 
44 
4.4 INAP – API Message Sequence Charts 
In the following sections, message sequence charts are used to show 
example sequences of API function calls with associated INAP and TCAP 
module messages. The first example shows a dialogue being opened at the 
local system and the second example shows the case where the dialogue is 
opened at the remote system. In all cases, only the messages at the local 
system are shown. 
4.4.1 Outgoing Dialogue 
INAP 
User  INAP  TCAP 
See Opening a 
Dialogue 
(p. 45) 
--INAP_DLG_REQ(OPEN)    
See Sending 
an Operation 
(p. 45) 
--INAP_SRV_REQ(INVOKE)    
   --TCAP_INVOKE  
See Sending a 
Delimit (p. 46) --INAP_DLG_REQ(DELIMIT) 
    
   --TCAP_BEGIN  
   TCAP_CONTINUE--  
See Receiving 
an Open 
Response 
(p. 46) 
INAP_DLG_IND(OPEN-RSP)--    
See Decoding 
an Operation 
(p. 47) 
INAP_SRV_IND(INVOKE)--    
 INAP_DLG_IND(DELIMIT)--    
   TCAP_END--  
See Receiving 
a Close (p. 48) 
INAP_DLG_IND(CLOSE)--    
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
45 
Opening a Dialogue 
In order to open a dialogue with a remote system the user application obtains 
a message structure and fills in the associated parameters. The message can 
then be set as a dialogue open before sending to the INAP module. One of 
the parameters in the open message should indicate the application context 
to be used for the length of the dialogue. This can either be the application 
context index or full application context. The application context index is used 
to reference a pre-configured application context. 
h = IN_alloc_message(); 
IN_set_dialogue_param(INDP_dest_address,len,dptr,h); 
IN_set_dialogue_param(INDP_orig_address,len,dptr,h); 
IN_set_dialogue_param(INDP_applic_context_index,len,dptr,h); 
IN_dialogue_open(dlg_id,h); 
IN_send_message(user_id,inap_id,h); 
Nothing will be sent to the remote system at this point. The INAP binary 
module is waiting for any INAP operation invocations with which the user may 
wish to open the dialogue. The dialogue id chosen for the open request 
should be an idle dialogue from the outgoing range defined by the values in 
the INAP configuration message (see Section 5.1 INAP Configuration Request 
on page 57). 
Sending an Operation 
To send an operation on an opened dialogue first a message structure is 
obtained in the same way as for dialogue messages. The user must then 
initialize an instance of a component structure, denoted here as ‘cpt’. This 
initializes the fields in the component structure, including setting the protocol 
to be used to encode or decode messages. The cpt structure is used to store 
information ready for encoding into a message structure. The 
IN_set_operation is used to set the operation and timeout values. The 
IN_set_component_parameter procedure is used to store parameter data into 
the cpt structure. Once all of the required parameters are stored in the 
component, the IN_code_operation_invoke encodes the data from the cpt 
structure into the message structure ready for sending to the INAP module.  
h = IN_alloc_message(); 
IN_init_component(prot_spec,cpt); 
IN_set_operation(op_name,timeout,cpt); 
IN_set_component_param(INPN_InvokeID,len,dptr,cpt); 
IN_set_component_param(param1,len,dptr,cpt); 
IN_set_component_param(param2,len,dptr,cpt); 
IN_code_operation_invoke(dlg_id,cpt,h); 
IN_send_message(user_id,inap_id,h); 
4 Functional API User Interface 
46 
Sending a Delimit 
The delimit message is built and sent in a similar way to the open message. 
Once this is received by the INAP binary, any pending components will be 
sent to the remote system in a TCAP Begin message. 
h = IN_alloc_message(); 
IN_dialogue_delimit(dlg_id,h); 
IN_send_message(user_id,inap_id,h); 
Receiving an Open Response 
The procedure GCT_receive can be used to receive the incoming message. 
The message type will indicate it is a dialogue indication and the procedure 
IN_get_dialogue_type will show the message is an open response. The open 
response message will indicate in the result parameter whether the remote 
system wishes to accept or reject the dialogue. 
h = GCT_receive(); 
 
switch (h->type) 
{ 
  case INAP_MSG_SRV_IND : 
    ... 
    break; 
 
  case INAP_MSG_DLG_IND : 
    IN_get_dialogue_type(h,dlg_type_ptr); 
    switch (dlg_type_ptr) 
    { 
       ... 
       case INDT_OPEN_RSP: 
         
IN_get_dialogue_param(INDP_result,lenptr,dptr,max_len,h); 
         
IN_get_dialogue_param(INDP_refuse_rsn,lenptr,dptr,max_len,h); 
         
IN_get_dialogue_param(INDP_applic_context,lenptr,dptr,max_len,h); 
         ...      
         break; 
       ... 
    } 
    break; 
 ... 
} 
relm(h); 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
47 
Decoding an Operation 
The operation invoke message is received in the same way as the dialogue 
open response, but in this case the message type will indicate it is a service 
indication. The procedure IN_get_component_type can be used to see the 
procedure is an operation invoke. Just as when encoding an operation into a 
service request, a component structure must be initialized ready for use when 
decoding a component from a service indication message. 
h = GCT_receive(); 
 
switch (h->type) 
{ 
  case INAP_MSG_SRV_IND : 
    IN_get_component_type(h,&cpt_type); 
    switch (cpt_type) 
    { 
      case INCPT_INVOKE   :  
IN_init_component(prot_spec,cpt); 
IN_decode_operation(cpt,h); 
IN_get_component_param(param1,lenptr,dptr,buffer_size,cpt); 
IN_get_component_param(param2,lenptr,dptr,buffer_size,cpt); 
...  
break; 
      ... 
    break; 
 
  case INAP_MSG_DLG_IND :  
       ... 
    } 
    break; 
 ... 
} 
relm(h); 
If the message received is corrupted or does not contain mandatory 
parameters, the return code from IN_decode_operation will indicate a reject 
is required. The cpt structure used for the decoding of the operation will have 
the information needed for the reject already encoded in it. The 
IN_code_reject procedure can be used to build the reject from the cpt 
structure before sending to the remote system. 
4 Functional API User Interface 
48 
Receiving a Close 
The procedure GCT_receive can be used to receive the incoming message. 
The message type will indicate that it is a dialogue indication and the 
procedure IN_get_dialogue_type will show the message is a close.  
h = GCT_receive(); 
 
switch (h->type) 
{ 
  case INAP_MSG_SRV_IND : 
    ... 
    break; 
 
  case INAP_MSG_DLG_IND : 
 
    IN_get_dialogue_type(h,dlg_type_ptr); 
    switch (dlg_type_ptr) 
    { 
      ... 
      case INDT_CLOSE: 
IN_get_dialogue_param(INDP_release_method,lenptr,dptr,max_len,m); 
...       
break; 
        ... 
    } 
    break; 
 ... 
}  
relm(h); 
The close indicates that the dialogue should be ended and no further 
communication for that dialogue is possible. Resources for that dialogue 
should be closed and the dialogue id should be made available for re-use. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
49 
4.4.2 Incoming Dialogue 
INAP User  INAP  TCAP 
   TCAP_BEGIN--  
See Receiving a 
Dialogue Open (p. 49) 
INAP_DLG_IND(OPEN)--    
   TCAP_INVOKE--  
See Decoding an 
Operation (p. 50) 
INAP_SRV_IND(INVOKE)--    
See Decoding a 
Delimit (p. 51) 
INAP_DLG_IND(DELIMIT)--    
See Sending an Open 
Response (p. 51) --INAP_DLG_REQ(OPEN_RSP) 
   
See Sending an 
Operation (p. 51) --INAP_SRV_REQ(INVOKE) 
    
   --TCAP_INVOKE  
 --INAP_DLG_REQ(DELIMIT)    
   --TCAP_CONTINUE 
See Sending a Close 
(p. 52) --INAP_DLG_REQ(CLOSE) 
    
   --TCAP_END  
Receiving a Dialogue Open 
A dialogue open indication can be decoded in the same way as other dialogue 
indications shown in the previous example. The value of the dialogue id is 
chosen from idle dialogues by the INAP binary module. The valid ids are 
defined by the values in the in INAP configuration message. (See Section 5.1 
INAP Configuration Request on page 57.) 
If the INAP binary has been pre-configured with valid application contexts 
using the INAP_MSG_CNF_AC message then it will handle the application 
context negotiation. This means when it receives a request to open a dialogue 
for a particular application context it knows which are supported by the local 
system. If the incoming application context matches one of the supported 
application contexts then the open indication will contain the corresponding 
application context index. See Section 5.5 INAP Application Context 
Configuration Request on page 65 for more information on configuring 
application contexts. 
4 Functional API User Interface 
50 
If application contexts have not be pre-configured, then the open indication 
will contain the full application context and this application context will have 
to be echoed back to the remote system in the open response and any other 
dialogue requests.  
h = GCT_receive(); 
 
switch (h->type) 
{ 
  case INAP_MSG_SRV_IND : 
    ... 
    break; 
 
  case INAP_MSG_DLG_IND : 
 
    IN_get_dialogue_type(h,dlg_type_ptr); 
    switch (dlg_type_ptr) 
    { 
       ... 
       case INDT_OPEN: 
IN_get_dialogue_param(INDP_dest_address,lenptr,dptr,max_len,m); 
IN_get_dialogue_param(INDP_orig_address,lenptr,dptr,max_len,m);  
IN_get_dialogue_param(INDP_dest_FE,lenptr,dptr,max_len,m); 
IN_get_dialogue_param(INDP_orig_FE,lenptr,dptr,max_len,m); 
IN_get_dialogue_param(INDP_applic_context_index,lenptr,dptr, 
                             max_len,m); 
         ...      
         break; 
       ... 
    } 
    break; 
 ... 
} 
relm(h); 
Decoding an Operation 
The operation decode can be performed as described in Decoding an 
Operation on page 47.  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
51 
Decoding a Delimit 
The procedure GCT_receive can be used to receive the incoming message. 
The message type will indicate it is a dialogue indication and the procedure 
IN_get_dialogue_type will show the message is a delimit.  
h = GCT_receive(); 
 
switch (h->type) 
{ 
  case INAP_MSG_SRV_IND : 
    ... 
    break; 
 
  case INAP_MSG_DLG_IND : 
 
    IN_get_dialogue_type(h,dlg_type_ptr); 
    switch (dlg_type_ptr) 
    { 
       ... 
       case INDT_DELIMIT: 
       ...    
       break; 
     ... 
    } 
    break; 
 ... 
} 
relm(h); 
The delimit indicates that all of the pending group of operations, results or 
errors received from the remote system in the same message over the 
signaling link have been sent from the INAP binary.  
Sending an Open Response 
The open response is built and sent in a similar way to the open message. 
m = IN_alloc_message(); 
IN_set_dialogue_param(param1,len,dptr,m); 
IN_set_dialogue_param(param2,len,dptr,m); 
IN_set_dialogue_param(param3,len,dptr,m); 
IN_dialogue_open_rsp(dlg_id,m); 
IN_send_message(user_id,inap_id,m); 
Sending an Operation 
The operation encode and send can be performed as described in Sending an 
Operation on page 45.   
As before the sending of the operation will not trigger a message to be sent 
to INAP until a delimit (or close) is sent to INAP. 
4 Functional API User Interface 
52 
Sending a Close 
The close request is sent to end the dialogue with the remote system and the 
release method parameter should be used to show whether this should be a 
normal or pre-arranged end. 
m = IN_alloc_message(): 
IN_dialogue_close(dlg_id,m); 
IN_set_dialogue_param(INDP_release_method,len,dptr,m); 
IN_send_message(user_id,inap_id,m); 
4.4.3 Incoming Dialogue with Pre-arranged End 
INAP User  INAP  TCAP 
   TCAP_BEGIN--  
 INAP_DLG_IND(OPEN)--    
   TCAP_INVOKE--  
 INAP_SRV_IND(INVOKE)--    
 INAP_DLG_IND(DELIMIT)--    
 --INAP_DLG_REQ(OPEN_RSP)    
 --INAP_SRV_REQ(INVOKE)    
   --TCAP_INVOKE  
 --INAP_DLG_REQ(DELIMIT)    
   --TCAP_CONTINUE  
Closing a 
Dialogue with 
Pre-arranged 
End  below 
--INAP_DLG_REQ(CLOSE) 
PRE_ARRANGED_END 
   
  Waiting 
for timeout   
    TCAP_L_CANCEL--  
Close 
Indication on 
Operation 
Timeout (p. 53) 
INAP_DLG_IND(CLOSE)— 
(On operation timeout) 
 --TCAP_END 
(Pre-arranged end, no 
message to remote 
system) 
 
Closing a Dialogue with Pre-arranged End 
INAP and TCAP specifications allow a dialogue to be closed under some 
conditions without an explicit TC-END being sent over the SS7 link. If a close 
with release reason of pre-arranged end is sent to INAP then the module will 
wait until the operation timers of outgoing operations have expired before 
closing the dialogue. Any component waiting to be sent from INAP will be 
discarded. To send pending components, a delimit must preceded the close 
pre-arranged end.  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
53 
Close Indication on Operation Timeout 
When the operation timer expires the INAP binary will send a close indication 
to the user module to allow the user to free their dialogue resources. After 
sending the indication INAP will free its own resources for the dialogue.  
Waiting for the timeout allows for any possible errors to the operation to be 
returned before the dialogue closes. The release confirm parameter can be 
used to differentiate between a normal close indication and a close confirm 
following a close pre-arranged end. 
4.5 API Dialogue Parameters  
The functional API permits the user to establish, maintain and terminate 
dialogues with remote Functional Entities. 
The dialogue control functions are common to all INAP applications.  
The API functions act to send and receive dialogue request and indication 
messages to the INAP module. The parameters that are required for these 
messages are those detailed in the message specifications given in Chapter 3 
INAP Module User Interface on page 15.  
The mnemonics available to the user application for the parameter names are 
provided in the interface include file (in_inc.h) accompanying the API. 
The parameters that should be placed in the message structure using the 
IN_set_dialogue_param() function for each of the message primitive types 
are summarized below. 
 IN Dialogue Primitive Type 
Parameter INDT_OPEN INDT_ 
CLOSE INDT_ DELIMIT INDT_U_  ABORT  INDT_OPEN_ RSP  
Destination address A     
Originating address B     
Destination reference A     
Originating reference B     
Result     M 
Refuse reason     O 
Release method  M    
User reason    M  
Application context 
name O O O O O 
Application context 
index C   O  
User Information      
4 Functional API User Interface 
54 
Key 
Symbol Description 
M Mandatory The message will be discarded if the corresponding parameter is 
omitted 
O Optional The parameter is not essential 
A Exclusive OR One of the parameters marked A must be included. 
B Exclusive OR One of the parameters marked B must be included. 
C Conditional The parameter marked C must be included if AC negotiation is 
enabled.  
The parameters that may be recovered from the message structure using the 
IN_get_dialogue_param() function for each of the message primitive types 
are summarized below. 
 IN Dialogue Primitive Type 
Parameter INDT_ 
OPEN INDT_ CLOSE INDT_ DELIMIT INDT_U_ABORT INDT_P_ABORT INDT_ OPEN_RSP INDT_ NOTICE 
Destination 
address A       
Originating 
address B       
Destination 
reference A       
Originating 
reference B       
Result      M  
Refuse 
reason      O  
User 
reason    M    
Provider 
reason     M   
Application 
context 
name O O O O  O  
Application 
context 
index C     O  
Source     M   
Problem 
diagnostic       M 
Release 
confirm  O      
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
55 
 IN Dialogue Primitive Type 
Parameter INDT_ 
OPEN INDT_ CLOSE INDT_ DELIMIT INDT_U_ABORT INDT_P_ ABORT INDT_ OPEN_RSP INDT_NOTICE 
Report 
Cause       O 
User 
Information O O O O    
The available parameter mnemonics are summarized below: 
Parameter Mnemonic Value (dec) Value (hex) 
Destination address INDP_dest_address 1 0x01 
Originating address INDP_orig_address 3 0x03 
Result INDP_result 5 0x05 
Refuse reason INDP_refuse_rsn 6 0x06 
Release method INDP_release_method 7 0x07 
User reason INDP_user_rsn 8 0x08 
Provider reason INDP_prov_rsn 9 0x09 
User Information INDP_user_info 10 0x0a 
Application context name INDP_applic_context 11 0x0b 
Source INDP_source 12 0x0c 
Problem diagnostic INDP_prob_diag 13 0x0d 
Destination FE code INDP_dest_FE 14 0x0e 
Originating FE code INDP_orig_FE 15 0x0f 
Application Context Index INDP_applic_context_index 27 0x1b 
Release Confirm INDP_release_confirm 28 0x1c 
Report Cause INDP_report_cause 30 0x1e 
The parameters are used as required by the INAP module. See Chapter 3 
INAP Module User Interface on page 15.   
4 Functional API User Interface 
56 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
57 
5 Non-Primitive Interface 
In addition to the primitive interface for passing INAP protocol messages 
between the INAP module and the User application, the INAP module 
supports a non-primitive interface for implementation-specific functionality. 
The non-primitive interface permits the configuration of the INAP module.   
It also allows the INAP module to supply diagnostic information, protocol 
error events and software error events to the local system management and 
maintenance modules.  
This section describes the formats of all the messages used in the non- 
primitive interface. 
All of the messages handled by the INAP module may request a confirmation 
by setting the rsp_req field in the message header.  
The confirmation message consists of the received message echoed back to 
the sending module. The status field of the confirmation message header may 
take one of the following values.  
Mnemonic Value Description 
INAPE_BAD_ID 1 Inappropriate or invalid id in request message 
INAPE_BAD_STATE 2 Message received in wrong state. 
INAPE_BAD_MSG 5 Unsupported message received. 
INAPE_BAD_PARAM 6 Invalid parameters contained in message. 
INAPE_NO_RESOURCES 7 Insufficient internal message resources. 
INAPE_INVALID_NC 8 Invalid Network Context 
INAPE_INVALID_VERSION 9 Message version is invalid 
5.1 INAP Configuration Request 
Synopsis 
Message used to configure the INAP module for operation. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_CONFIG (0x77f4) 
id 0 
src Sending module_id 
dst INAP_TASK_ID 
rsp_req used to request a confirmation 
hclass 0 
status 0 
err_info 0 
len 40 
 
5 Non-Primitive Interface 
58 
Parameter Area 
Offset Size  Name 
0 1 user_id 
1 1 TCAP_id 
2 1 mngt_id 
3 1 maint_id 
4 1 trace_id 
5 1 reserved 
6 2 base_usr_ogdlg_id 
8 2 base_usr_icdlg_id 
10 2 base_tc_ogdlg_id 
12 2 base_tc_icdlg_id 
14 2 nog_dialogues 
16 2 nic_dialogues 
18 2 num_invokes 
20 4 options 
24 16 reserved  
Description 
This message is used to configure the INAP module for operation. It should 
be the first message sent to the module. Any messages received before a 
valid configuration message will be discarded. It should only be issued once. 
The message parameters relate to the environment in which the INAP module 
is operating.  
Parameter Description 
user_id 
User Application module ID.  
Note: The INAP module may be configured with Functional Entity references 
(see Section 5.4 INAP Functional Entity Configuration Request on page 63). 
These references permit a module ID to be associated with each local FE.  
The User ID configured here acts as the default User Application ID for 
received messages whose destination address is not among the configured 
local FEs. 
TCAP_id 
TCAP module ID. 
mngt_id 
Management module ID. The module to which software event indications are 
sent. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
59 
maint_id 
Maintenance module ID. The module to which maintenance event indications 
are sent. 
trace_id 
Trace module ID. The module to which trace event indications are sent. 
base_usr_ogdlg_id 
The first dialogue ID for outgoing dialogues. The user assigns dialogue IDs for 
outgoing dialogues. The User should assign values in the range 
base_ogdlg_id to (base_ogdlg_id + nog_dialogues - 1). The user must ensure 
that the dialogue ID is included in all protocol messages sent via the outgoing 
dialogue. 
base_usr_icdlg_id 
The first dialogue ID for incoming dialogues. The INAP module allocates the 
dialogue ID for incoming dialogues. It uses values in the range base_icdlg_id 
to (base_icdlg_id + nic_dialogues - 1) for this purpose. It is important that 
different ranges of values are used for incoming and outgoing dialogues on 
the user interface. This prevents the INAP module assigning a dialogue ID to 
an incoming dialogue at the same instant the user assigns it to an outgoing 
dialogue. 
base_tc_ogdlg_id 
The first dialogue ID for outgoing dialogues for use on the INAP module - 
TCAP interface. The INAP module allocates dialogue IDs for outgoing 
dialogues. It uses values in the range base_tc_ogdlg_id to (base_tc_ogdlg_id 
+ nog_dialogues - 1) for this purpose. 
base_tc_icdlg_id 
The first dialogue ID for incoming dialogues for use on the INAP module - 
TCAP interface. The TCAP module allocates the dialogue ID for incoming 
dialogues. It uses values in the range base_tc_icdlg_id to (base_tc_icdlg_id + 
nic_dialogues - 1) for this purpose. It is important that different ranges of 
values are used for incoming and outgoing dialogues on the INAP module – 
TCAP interface. This prevents the INAP module assigning a dialogue id to an 
outgoing dialogue at the same instant TCAP assigns it to an incoming 
dialogue. 
nog_dialogues 
The maximum number of simultaneous outgoing dialogues that the module is 
required to support. This value is compared with a compile time constant to 
ensure that the module has sufficient internal resources to handle the 
requested maximum number of outgoing dialogues. 
nic_dialogues 
The maximum number of simultaneous incoming dialogues that the module is 
required to support. This value is compared with a compile time constant to 
ensure that the module has sufficient internal resources to handle the 
requested maximum number of incoming dialogues. 
5 Non-Primitive Interface 
60 
num_invokes 
The maximum number of simultaneous invocations that the module is 
required to support. This value is compared with a compile time constant to 
ensure that the module has sufficient internal resources to handle the 
requested number of simultaneous invocations. 
Options 
Run time options are assigned according to the following table. 
Bit Mnemonic Description 
0  INAPF_ANSI ANSI operation 
If set to one the module will handle ANSI format TCAP 
components specified according to ANSI T1.114. No 
application contexts should normally be configured for ANSI 
operation. 
If not set the INAP module will handle ITU format TCAP 
components specified according to ITU Q.773. 
1  INAPF_TRNS_AC Transparent Application Context 
If set to one, the module will convey the Application Context 
received in incoming dialogue messages to the user in the 
"Application Context Name" parameter. The user may also 
provide the Application Context for outgoing dialogue 
messages using the same "Application Context Name" 
parameter. 
This permits the user application to handle application context 
negotiation if so required. It can also be used to enable 
interworking with implementations that do not make use of 
application contexts by forcing the module to ignore the 
application context parameter. 
The "Application Context Name" parameter is not used if this 
option is not set. 
2  INAPF_24PC Use 24 bit point codes. 
If set to one, the module will expect 24 bit point codes when 
examining Functional Entity Addresses. 
If set to zero, the module will expect 14 bit point codes when 
examining Functional Entity Addresses. 
3 INAPF_NULL_TC_CONT Null TC-CONTINUE 
If set, the INAP module will generate an 
INAPDT_DELIMITER_IND on reception of TC-CONTINUE 
without any component in the established state.  
If not set, the Null TC-CONTINUE will be discarded (default 
operation) 
4 INAPF_SEGMENTATION Set to 1 to enable segmentation support when used with an 
appropriate SCCP and TCAP configuration. 
5 - 
15 none Reserved. 
Reserved bits should be set to zero. 
Reserved 
Reserved for future use. Should be set to zero. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
61 
5.2 INAP Network Context Configuration Request 
Synopsis 
Message used to configure a Network Context. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_NC_CONFIG (0x77f8) 
id Network Context id (value 1 to 3) 
src Sending module_id 
dst INAP_TASK_ID 
rsp_req used to request a confirmation 
hclass 0 
status 0 
err_info 0 
len 40 
 
Parameter Area 
Offset Size  Name 
0 1 cnf_ver 
1 1 user_id 
2 1 TCAP_id 
3 2 options 
5 35 reserved 
Description 
This allows the configuration of additional Network Contexts. The 
INAP_MSG_CONFIG (0x77f4) message should be used to configure the 
default Network Context for the first network. For each subsequent Network 
Context, the message INAP_MSG_NC_CONFIG is required. The 
INAP_MSG_NC_CONFIG message contains parameters to define address 
format and INAP specific options and therefore allows different behavior for 
the module to be selected depending on the Network Context of the dialogue.  
The meaning of the parameters in the INAP_MSG_NC_CONFIG message is 
the same as the equivalent parameters in the INAP_MSG_CONFIG message. 
When used to support multiple local point codes within the same network, the 
options settings should typically be the same in both messages. 
Parameter Description 
Network Context Id 
5 Non-Primitive Interface 
62 
The Network Context id will identify the Network Context being defined. The 
default Network Context (0) is configured using the existing 
INAP_MSG_CONFIG message therefore this message should only be used for 
Network Contexts 1 to 3. This assumes that four Network Contexts are 
permitted. 
cnf_ver 
Version of this NC configuration message. (Currently only version zero). 
user_id 
INAP-User module ID for this NC. 
TCAP_id 
TCAP module ID for this NC. 
options 
Run-time options assigned for this NC. Defined according to the options field 
table for the INAP_MSG_CONFIG message. 
reserved 
Reserved for future use. Should be set to zero. 
5.3 INAP Timer Configuration Request 
Synopsis 
Message used to set up default protocol timers for use by the INAP module. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_CNF_TIM (0x77f5) 
id 0 
src Sending module_id 
dst INAP_TASK_ID 
rsp_req used to request a confirmation 
hclass 0 
status 0 
err_info 0 
len 40 
 
Parameter Area 
Offset Size  Name 
0 2 tguard 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
63 
Description 
This message is used to configure the INAP protocol timers for operation. It 
should be sent to the module before any protocol messages are sent or 
received.  
Timer values are in multiples of the timer tick period which should usually be 
100ms. 
Parameter Description 
tguard 
Timer:  Waiting for a response from the User application. A minimum value of 
5 seconds is recommended (If the Configure Timers message is not sent, a 
default value of 50 seconds will be used.). 
5.4 INAP Functional Entity Configuration Request 
Synopsis 
Message used to set up the internal Functional Entity records.  
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_CNF_FE (0x77f7) 
id FE reference 
src Sending module_id 
dst INAP_TASK_ID 
rsp_req used to request a confirmation 
hclass 0 
status 0 
err_info 0 
len 40 
 
Parameter Area 
Offset Size  Name 
0 2 FE options 
2 1 local FE module ID 
3 1 FE SCCP address length 
4 18 FE SCCP address  
22 18 reserved  
5 Non-Primitive Interface 
64 
Description 
This message is used to configure the INAP functional entity records for 
operation. These allow the User application to refer to Functional Entities in 
the network via a local reference rather than providing the full SCCP address.  
All Functional Entity configuration messages must contain the FE reference 
assigned by the User application to this FE. This is encoded in the message 
header and does not form part of the parameter area. The user may 
subsequently use this reference in the “Destination FE” or “Originating FE” 
parameters of the INAP_OPEN_DLG primitive or “IN_dialogue_open” API 
function. This reference is used instead of the destination or origination 
address parameter. 
Parameter Description 
FE options 
Run time options assigned according to the following table: 
Bit Mnemonic Description 
0  INAPFE_LOCAL Local FE¶If set to one the FE is local, i.e.: it is at the 
local point code.¶If not set the FE resides at a remote 
point code. 
1 - 15 none Reserved.¶Reserved bits should be set to zero.  
Local FE module ID 
Used when the FE is located at the local point code. 
Single octet indicating the Module Id to which messages addressed to this FE 
should be sent. Used only for local FEs. This permits the INAP module to 
support INAP dialogues to several local FEs distinguished by their SCCP 
addresses.  
Note: Any message received whose destination address has not been configured using 
the FE configuration message is sent to the User Application Module ID configured 
in the module configuration message. 
Note: Within the local SCCP module, local FEs must be configured as Local Sub Systems. 
If the INAP and TCAP module are to be shared between FEs, all Local Sub Systems 
must be configured to use the same TCAP module ID. 
FE SCCP address length 
The length of the SCCP address of the Functional Entity. 
FE SCCP address 
The SCCP address of the Functional Entity. 
Reserved 
Reserved for future use. Should be set to zero. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
65 
5.5 INAP Application Context Configuration Request 
Synopsis 
Message used to set up the internal Application Context records.  
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_CNF_AC (0x77f6) 
id Application Context Reference 
src Sending module_id 
dst INAP_TASK_ID 
rsp_req used to request a confirmation 
hclass 0 
status 0 
err_info 0 
len 9 + ac_len 
 
Parameter Area 
Offset Size  Name 
0 8 Reserved 
8 1 Application Context Length (ac_len) 
9  ac_len Application Context 
Description 
This message is used to configure the INAP Application Context records for 
use. These control the application context negotiation that the module 
conducts during dialogue establishment. All supported application contexts 
must be individually configured using this message.  
The module will only accept incoming dialogues with configured Application 
Contexts. If a dialogue request with an unconfigured context is received, a 
dialogue abort message is returned to the requesting Functional Entity.  
If no supported Application Contexts are configured, the application context 
negotiation is disabled. The module will accept all incoming dialogues. 
The number of Application Context records available to the user is configured 
at module initialization using the Module Configuration message.   
All Application Context configuration messages must contain the AC reference 
assigned by the User application to this AC. This is encoded in the message 
header and does not form part of the parameter area. The user may 
subsequently use this reference in the “ac_reference” parameter of the 
INAP_OPEN_DLG primitive or “IN_dialogue_open” API function to indicate the 
application context required for the dialogue.  
5 Non-Primitive Interface 
66 
Parameter Description 
Reserved 
Reserved for future use. Should be set to zero. 
Application Context Length  
The application context length indicates the number of octets representing 
the Application Context. 
Application Context 
The octet string specified in the relevant IN standard to represent the 
required application context. Encoded as specified in Q.773 commencing with 
the Object Identifier Name tag. This is the same format as expected for the 
parameter INAPPN_applic_context. 
5.6 Read Revision Request 
Synopsis 
Message used to request the module type and software revision number. 
Message Format 
Message Header 
Field Name Meaning 
type GEN_MSG_MOD_IDENT (0x6111) 
id 0 
src Originating module ID 
dst INAP_TASK_ID 
rsp_req Sending layer’s bit must be set 
hclass 0 
status 0 
err_info 0 
len 28 
 
Parameter Area 
Offset Size  Name 
0 2 type Currently undefined 
2 1 maj_rev Major version number 
3 1 min_rev Minor version number 
4 24 text  Null terminated string giving textual module identity 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
67 
Description 
This message is provided to request a reply indicating the software version 
for module under test. 
On receipt of this request the module returns the message with status 
"SUCCESS" to the sender including the information requested. 
5.7 INAP Software Event Indication 
Synopsis 
Message used by INAP to indicate an implementation specific software related 
event to the local management module. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_ERROR_IND (0x07f8) 
id See below 
src INAP_TASK_ID 
dst Management module id 
rsp_req 0 
class 0 
status Software event code (see below) 
err_info 0 
len 0 
Description 
This message is used by INAP to notify system management of various 
software events which under normal operating conditions should not occur.  
These events may be due to lack of system resource or error within the 
system. 
5 Non-Primitive Interface 
68 
Software Event Code 
The Software event code contained in the status field of the message 
indicates the type of event. Possible values are listed in the following table, 
which also lists the meaning of the id field in each case. 
Mnemonic Code Id Description 
INAPSWE_NO_MSSM 1 0 Maximum number of active invocations 
exceeded. 
INAPSWE_NO_DLG 2 0 No internal resource to handle 
dialogue. 
INAPSWE_NO_ISM 3 0 Internal pool of structured messages 
exhausted. 
INAPSWE_ISM_LOW 4 0 Internal pool of structured messages 
running low. 
INAPSWE_BAD_MSG 5 msg_type Unrecognized inter process message 
received. 
INAPSWE_TX_FMT_ERR 6 0 Internal error during message 
formatting. 
INAPSWE_USER_BAD_FMT 7 msg_type Badly formatted message received 
from User. 
INAPSWE_TCAP_BAD_FMT 8 msg_type Badly formatted message received 
from TCAP. 
INAPSWE_UNREC_TYPE 9 msg_type Unrecognized message received from 
TCAP. 
INAPSWE_INVALID_DLG_ID 10 dlg_id Message received with unrecognized 
dialogue id. 
INAPSWE_INVALID_NC 11 nc Message received with unrecognized 
Network Context. 
5.8 INAP Maintenance Event Indication 
Synopsis 
Message used by INAP to indicate a protocol related event to the local 
maintenance module.  
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_MAINT_IND (0x07f9) 
id See below 
src INAP_TASK_ID 
dst Maintenance module id 
rsp_req 0 
class 0 
status Maintenance event code (see below) 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
69 
Message Header 
Field Name Meaning 
err_info 0 
len 0 
Description 
This message is used by INAP to indicate a protocol related to the 
maintenance module. 
Maintenance Event Code 
The Maintenance event code contained in the status field of the message 
indicates the type of event. Possible values are listed in the following table, 
which also lists the meaning of the id field in each case. 
Mnemonic Code Id Description 
INAPME_INVALID_AC 0x1 dlg_id Dialogue received from TCAP with unrecognized 
Application Context. 
INAPME_INVALID_NC 0x02 dlg_id Dialogue received from INAP-User or TCAP with 
unrecognized Network Context. 
5.9 INAP Management Event Indication 
Synopsis 
This message is issued by the INAP module to notify system management of 
general software events that under normal operating conditions should not 
occur. These events may be due to lack of system resources or errors within 
the software. 
Message Format 
Message Header 
Field Name Meaning 
type MGT_MSG_EVENT_IND (0x0008) 
id 0 
src MAP_TASK_ID 
dst Management module ID 
rsp_req 0 
hclass 0 
status Management event code (see below) 
err_info Time-stamp 
reserved 0 
len 0 
5 Non-Primitive Interface 
70 
Management Event Code 
The Management event code contained in the status field of the message 
indicates the type of event.  Possible values are listed in the following table 
which also lists the meaning of the id field in each case. 
Mnemonic Value id Description 
ERR_SDLSIG_LOW 47 0x2f 0 The internal signal queue is running short of entries. If 
this fault persists, the software should be re-built with 
more signals allocated to the signal queue. 
ERR_NO_SDLSIG 46 0x2e 0 The internal signal queue has been exhausted. If this 
event occurs then correct operation of the module is 
not guaranteed. 
5.10 INAP Trace Mask Request 
Synopsis 
Message used to configure INAP to send a trace message to the trace module 
whenever a specific message type is sent or received.  The trace module is 
identified in the INAP configuration request message. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_TRACE_MASK (0x57fb) 
id 0 
src Sending module ID 
dst INAP_TASK_ID 
rsp_req Used to request a confirmation 
hclass 0 
status 0 
err_info 0 
len 12 
 
Parameter Area 
Offset Size  Name 
0 4 op_evt_mask - Output event trace mask 
4 4 ip_evt_mask - Input event trace mask 
8 4 non_prim_mask - Non-primitive trace mask 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
71 
Description 
op_evt_mask 
The output event trace mask. This is a 32-bit value with bits set to 1 to cause 
a trace message to be sent to the system trace module when INAP sends the 
associated protocol message.      
31 30 29 28 27 26 25 24 
0 0 0 0 0 0 0 0 
 
31 30 29 28 27 26 25 24 
0 0 0 0 0 0 0 0 
 
23      22 21 20 19 18 17 16 
0 0 0 0 0 0 0 0 
 
7       6      5       4       3       2       1       0 
0 0 0 0 TCCMP IND2 TCDLG IND3 INAPSRV REQ4 INAPDLG REQ5 
ip_evt_mask 
The input event trace mask. This is a 32-bit value with bits set to 1 to cause a 
trace message to be sent to the system trace module when INAP receives the 
associated protocol message.  
31 30 29 28 27 26 25 24 
0 0 0 0 0 0 0 0 
 
31 30 29 28 27 26 25 24 
0 0 0 0 0 0 0 0 
 
23      22 21 20 19 18 17 16 
0 0 0 0 0 0 0 0 
 
7      6      5      4      3       2       1       0 
0 0 0 0 TCCMP IND6 TCDLG IND7 INAPSRV REQ8 INAPDLG REQ9 
                                                 
2 
 TCCMP_IND – Component request primitive from INAP to TCAP. 
3 
 TCDLG_IND – Dialogue request primitive from INAP to TCAP. 
4 
 INAPSRV_REQ – Service indication primitive from INAP to the user. 
5 
 INAPDLG_REQ – Dialogue indication primitive from INAP to the user. 
6 
 TCCMP_IND – Component Indication primitive from TCAP to INAP. 
7 
 TCDLG_IND – Dialogue Indication primitive from TCAP to INAP. 
8 
 INAPSRV_REQ – Service request primitive from the User to INAP. 
9 
 INAPDLG_REQ – Dialogue request primitive from the User to INAP. 
5 Non-Primitive Interface 
72 
non_prim_mask 
The non-primitive trace mask. This is a 32-bit value with bits set to 1 to 
cause a trace message to be sent to the system trace module when INAP 
receives the associated non-primitive message.  
31 30 29 28 27 26 25 24 
0 0 0 0 0 0 0 0 
 
31 30 29 28 27 26 25 24 
0 0 0 0 0 0 0 0 
 
23      22 21 20 19 18 17 16 
0 0 0 0 0 0 0 0 
 
7   6      5       4       3       2       1       0 
0 CNF_AC10 CNF_FE11 SSW_ MSK12 SMT_ 
MSK13 SW_EVT 
14 
MT_EVT15 CNF_ TIM16 
5.11 Trace Event Indication 
Synopsis 
The INAP trace event masks are used to enable tracing of all messages sent 
or received by the INAP module. The traced messages are reported in event 
indication messages as shown below: 
Message Format 
Message Header 
Field Name Meaning 
type MGT_MSG_TRACE_EV (0x0003) 
id 0 
src INAP_TASK_ID 
dst Trace module id 
rsp_req 0 
hclass 0 
status 0 
err_info 0 
                                                 
10 
 CNF_AC - Application Context Configuration Message received by INAP. 
11 
 CNF_FE - Functional Entity Configuration Message received by INAP. 
12 
 SSW_MSK - Software Event Mask Request message received by INAP. 
13 
 SMT_MSK - Maintenance Mask Request message received by INAP. 
14 
 SW_EVT– Software Error Event indication message sent by INAP to the management module. 
15 
 MT_EVT – Maintenance Event indication message sent by INAP to the maintenance module. 
16 
 CNF_TIM – Timer Configuration Message received by INAP. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
73 
Message Header 
Field Name Meaning 
len 18 + length of traced data 
 
Parameter Area 
Offset Size  Name 
0 1 source module id 
1 1 destination module id 
2 2 id 
4 2 type 
6 2 status 
8 4 timestamp 
12 4 pointer to the message being traced 
16 2 data length 
18 0 .. 280 data - Data taken from the contents of the MSG parameter area. 
5.12 INAP Maintenance Mask Request 
Synopsis 
Message used to configure which maintenance events INAP should trigger the 
sending of a maintenance event indication message. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_S_MAINT_MASK (0x57fd) 
id 0 
src Sending module ID 
dst INAP_TASK_ID 
rsp_req Used to request a confirmation 
class 0 
status 0 
err_info 0 
len 9 
 
Parameter Area 
Offset Size  Name 
0 9 mask 
5 Non-Primitive Interface 
74 
Mask 
A bit mask indicating the maintenance events which are active. A ‘1’ indicates 
that an event is active and a ‘0’ indicates that it is not. The first octet sent is 
for maintenance event codes 0-7, (bit 0 for event code 0) the second octet 
for maintenance event codes 8-15, (bit 0 for event code 8) etc.   
Pad unused bits with zeros. 
The maintenance events currently reported in the INAP Maintenance Event 
Indication message detailed in Section 5.8 INAP Maintenance Event Indication 
on page 68 are enabled by default. 
5.13 INAP Software Event Mask Request 
Synopsis 
Message used to configure the software error events for which INAP will send 
a software event indication message. 
Message Format 
Message Header 
Field Name Meaning 
type INAP_MSG_S_ERROR_MASK (0x57fc) 
id 0 
src Sending module ID 
dst INAP_TASK_ID 
rsp_req Used to request a confirmation 
class 0 
status 0 
err_info 0 
len 9 
 
Parameter Area 
Offset Size  Name 
0 9 mask 
Mask 
A bit mask indicating the software events which are active. A ‘1’ indicates 
that an event is active, and a ‘0’ indicates that is not active. The first octet 
sent is for software event codes 0-7 (bit 0 for event code 0), the second octet 
for software event codes 8-15 (bit 0 for event code 8), etc.  
Pad unused bits with zeros. 
All software events currently reported in the INAP Software Event Indication 
message detailed in Section 5.7 INAP Software Event Indication on page 67 
are enabled by default. 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
75 
Appendix A.  Tick Timer Message Format 
A.1 Tick Timer Message Format  
Synopsis 
The INAP module requires a periodic “tick timer” message. This must be sent 
at the required frequency, nominally every tenth of a second. 
Message Format 
Message Header 
Field Name Meaning 
type TM_EXP (0xc002) 
id Index to timer table 
src Sending module ID 
dst INAP_TASK_ID 
rsp_req 0 
class 0 
status 0 
err_info 0 
len 4 
 
Parameter Area 
Offset Size  Name 
0 4 Timer type 
  
5 Non-Primitive Interface 
76 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
77 
Appendix B. Supported INAP Application Contexts 
B.1 Overview 
This appendix contains the following information: 
• Supported INAP Application Contexts. See page 78.  
• Supported INAP Operations. See page 82. 
• Supported INAP Operation Parameters. See page 85. 
• ETSI CS-1 Operation Definitions. See page 87. 
• ITU-T CS-1 Operation Definitions. See page 102. 
• CAMEL v1 Operation Definitions. See page 117. 
• CAMEL v2 Operation Definitions. See page 121. 
• CAMEL v3 Operation Definitions. See page 133. 
• CAMEL v4 Operation Definitions. See page 160. 
• CAMEL v4 for IMS Operation Definitions. See page 199. 
• ETSI CS-2 Operation Definitions. See page 203. 
• AIN Operation Definitions. See page 246. 
• Operation Extensions. See page 257. 
• Supported INAP Parameter List. See page 259. 
• Supported INAP Operation Result. See page 283. 
• Supported INAP Errors. See page 288. 
• Supported INAP Error Parameters. See page 289. 
5 Non-Primitive Interface 
78 
B.2 Supported INAP Application Contexts 
The API functions support INAP operations specified to ETSI, ITU-T, CAMEL 
and AIN standards. The supported operations form part of the Application 
Contexts listed below. Mnemonics are defined to allow the User application to 
easily refer to a particular context.  
The mnemonics identified below are defined in the in_inc.h header file 
accompanying the API suite. They provide the parameter data for the 
"data_ptr" parameter of the IN_set_dialogue_param() and 
IN_get_dialogue_param() API functions when setting or recovering the 
"Application context index" dialogue parameter. 
Note: The INAP module may be configured to supply raw Application Context data to the 
User Application if required. See Section 5.1 INAP Configuration Request on page 
57. 
B.2.1 ETSI CS-1 
Specification: ETS 300 374-1, Sept 1994 
Application context Mnemonic Value 
(dec) Value (hex) 
Core-INAP-CS1-SSP-to-SCP-AC INETS_AC_CS1_SSP_TO_SCP 0 0x0 
Core-INAP-CS1-ASSIST- 
HANDOFF-TO-SSP-TO-SCP INETS_AC_CS1_ASSIST_HANDOFF_TO_SSP_TO_SCP 1 0x1 
Core-INAP-CS1-IP-TO-SCP INETS_AC_CS1_IP_TO_SCP 2 0x2 
Core-INAP-CS1-SSP-to-SCP-AC INETS_AC_CS1_SCP_TO_SSP 3 0x3 
Core-INAP-CS1-SCP-TO-SSP- 
TRAFFIC-MANAGEMENT INETS_AC_CS1_SCP_TO_SSP_TRAFFIC_MANAGEMENT 4 0x4 
Core-INAP-CS1-SCP-TO-SSP- 
SERVICE-MANAGEMENT INETS_AC_CS1_SCP_TO_SSP_SERVICE_MANAGEMENT 5 0x5 
Core-INAP-CS1-SSP-TO-SCP- 
SERVICE-MANAGEMENT INETS_AC_CS1_SSP_TO_SCP_SERVICE_MANAGEMENT 6 0x6  
B.2.2 ITU-T CS-1 
Specification: Q.1218, October 1995 
Application context Mnemonic Value 
(dec) Value (hex) 
IN-CS1-SSF-TO-SCF-GENERIC-AC INITU_CS1_SSF_TO_SCF_ GENERIC_AC 16 0x10 
IN-CS1-SSF-TO-SCF-DPSPECIFIC-AC INITU_CS1_SSF_TO_SCF_ DPSPECIFIC_AC 17 0x11 
IN-CS1-ASSIST-HANDOFF-SSF-TO-SCF- 
AC INITU_CS1_ASSIST_HANDOFF_ SSF_TO_SCF_AC 18 0x12 
IN-CS1-SRF-TO-SCF-AC INITU_CS1_SRF_TO_SCF_AC 19 0x13 
IN-CS1-SCF-TO-SSF-AC INITU_CS1_SCF_TO_SSF_AC 20 0x14 
IN-CS1-DP-SPECIFIC-SCF-TO-SSF-AC INITU_CS1_DP_SPECIFIC_SCF_ TO_SSF_AC 21 0x15 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
79 
Application context Mnemonic Value 
(dec) Value (hex) 
IN-CS1-SCF-TO-SSF-TRAFFIC- 
MANAGEMENT-AC INITU_CS1_SCF_TO_SSF_ TRAFFIC_MANAGEMENT_AC 22 0x16 
IN-CS1-SCF-TO-SSF-SERVICE- 
MANAGEMENT-AC INITU_CS1_SCF_TO_SSF_ SERVICE_MANAGEMENT_AC 23 0x17 
IN-CS1-SSF-TO-SCF-SERVICE- 
MANAGEMENT-AC INITU_CS1_SSF_TO_SCF_ SERVICE_MANAGEMENT_AC 24 0x18 
IN-CS1-SCF-TO-SSF-STATUS- 
REPORTING-AC INITU_CS1_SCF_TO_SSF_ STATUS_REPORTING_AC 25 0x19  
B.2.3 CAMEL v1  
Specification: CAMEL Application Part (CAP) GSM 09.78 version 5.6.0 Release 1996 
Application context Mnemonic Value 
(dec) Value (hex) 
CAP-v1-gsmSSF-TO-gsmSCF INCAP_V1_GSMSSF_TO_ GSMSCF 32 0x20 
B.2.4 CAMEL v2 
Specification: CAMEL Application Part (CAP) GSM 09.78 version 6.3.0 Release 1997 
Application context Mnemonic Value 
(dec) Value (hex) 
CAP-v2-gsmSSF-to-gsmSCF INCAP_V2_GSMSSF_TO_ GSMSCF 33 0x21 
CAP-v2-ASSIST-HANDOFF- 
gsmSSF-to-gsmSCF INCAP_V2_ASSIST_HANDOFF_GSMSSF_TO_GSMSCF 34 0x22 
CAP-v2- gsmSRF-to-gsmSCF INCAP_V2_GSMSRF_TO_ GSMSCF 35 0x23 
B.2.5 CAMEL v3 
Specification: CAMEL Application Part (CAP) 3GPP TS 29.078 version 4.6.0 Release 2002 
Application context Mnemonic Value 
(dec) 
Value 
(hex) 
CAP-gsmSSF-scfGenericAC INCAP_V3_GSMSSF_TO_GSMSCF_GENERIC 80 0x50 
CAP-gsmSSF-scfAssistHandoffAC INCAP_V3_ASSIST_HANDOFF_GSMSSF_TO_GSMSCF 81 0x51 
CAP-gsmSRF-gsmSCF INCAP_V3_GSMSRF_TO_GSMSCF 82 0x52 
CAP-gprsSSF-gsmSCF-AC INCAP_V3_GPRSSSF_TO_GSMSCF 83 0x53 
CAP-gsmSCF-gprsSSF-AC INCAP_V3_GSMSCF_TO_GPRSSSF 84 0x54 
CAP-v3-sms-AC INCAP_V3_SMS 85 0x55 
5 Non-Primitive Interface 
80 
B.2.6 CAMEL v4 
Specification: CAMEL Application Part (CAP) 3GPP TS 29.078 7.3.0 (2006-06). See Section B.10 
CAMEL v4 Operation Definitions on page 160 for operation parameter definitions. 
Application context Mnemonic Value 
(dec) 
Value 
(hex) 
CAP-gsmSSF-scfGenericAC INCAP_V4_GSMSSF_TO_GSMSCF_GENERIC 112 0x70 
CAP-gsmSSF-scfAssistHandoffAC INCAP_V4_ASSIST_HANDOFF_GSMSSF_TO_GSMSCF 113 0x71 
CAP-scf-gsmSSFGenericAC INCAP_V4_SCF_TO_GSMSSF_GENERIC 114 0x72 
gsmSRF-gsmSCF INCAP_V4_GSMSRF_TO_GSMSCF 115 0x73 
CAP-gprsSSF-gsmSCF-AC INCAP_V4_GPRSSSF_TO_GSMSCF 116 0x74 
CAP-gsmSCF-gprsSSF-AC INCAP_V4_GSMSCF_TO_GPRSSSF 117 0x75 
cap4-sms-AC INCAP_V4_SMS 118 0x76 
B.2.7 CAMEL v4 for IMS 
Specification: CAMEL v4 for IMS protocol (3GPP TS 29.278 7.0.0). See Section B.11 CAMEL v4 
for IMS Operation Definitions on page 199 for operation parameter definitions. 
Application context Mnemonic Value 
(dec) 
Value 
(hex) 
CAP-IMSSF-scfGenericAC INCAP_V4_IM_SSF_TO_GSMSCF_GENERIC 144 0x90 
B.2.8 ETSI CS-2 
Specification: EN 301 140-1, June 1999 
Application context Mnemonic Value 
(dec) Value (hex) 
CS2-SSF-to-SCF-AC GENERIC INETS_AC_CS2_SSF_SCF_ GNERIC 52 0x34 
CS2-SSF-SCF-ASSIST- 
HANDOFF INETS_AC_CS2_SSF_SCF_ ASSIST_HANDOFF 54 0x36 
CS2-SSF-SCF-SERVICE- 
MANAGEMENT INETS_AC_CS2_SSF_SCF_ SERVICE_MANAGEMENT 55 0x37 
CS2-SCF-SSF-GENERIC INETS_AC_CS2_SCF_SSF_ GENERIC 56 0x38 
CS2-SCF-SSF-TRAFFIC- 
MANAGEMENT INETS_AC_CS2_SCF_SSF_ TRAFFIC_MANAGEMENT 58 0x3a 
CS2-SCF-SSF-SERVICE- 
MANAGEMENT INETS_AC_CS2_SCF_SSF_ SERVICE_MANAGEMENT 59 0x3b 
CS2-SCF-SSF-TRIGGER- 
MANAGEMENT INETS_AC_CS2_SCF_SSF_ TRIGGER_MANAGEMENT 61 0x3d 
CS2-SCF-to-SRF-AC INETS_AC_CS2_SRF_SCF 62 0x3e 
CS2-SCF-SCF- OPERATIONS INETS_AC_CS2_SCF_SCF_ OPERATIONS 69 0x45 
CS2-DISTRIBUTED-SCF- 
SYSTEM INETS_AC_CS2_DISTRIBUTED_SCF_SYSTEM 70 0x46 
CS2-SCF-SCF- OPERATIONS- 
WITH-3SE INETS_AC_CS2_SCF_SCF_ OPERATIONS_WITH_3SE 71 0x47 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
81 
Application context Mnemonic Value 
(dec) Value (hex) 
CS2-DISTRIBUTED-SCF- 
SYSTEM-WITH-3SE INETS_AC_CS2_DISTRIBUTED_SCF_SYSTEM_WITH_3SE 72 0x48 
CS2-SCF-CUSF INETS_AC_CS2_SCF_CUSF 73 0x49 
CS2-CUSF-SCF INETS_AC_CS2_CUSF_SCF 74 0x4a 
B.2.9 AIN 
Specification: GR-1299-CORE, Issue 7, November 2001 
Application context Mnemonic Value 
(dec) Value (hex) 
AIN-AC-GENERIC AINGR_1299_AC_GENERIC 60 0x3c 
5 Non-Primitive Interface 
82 
B.3 Supported INAP Operations 
The API functions supports INAP and AIN operations specified to the standard appropriate to the 
application context being supported; for example, the ETSI application contexts conform to ETS 
300 374-1. Not all of the operations supported are present in every of the protocol standards. 
The later operation definition sections show the operations appropriate to each standard. 
The mnemonics identified below are defined in the in_inc.h header file accompanying the API 
suite. They are used in the "op_name" parameter of the IN_set_operation() and 
IN_get_operation() API functions. 
The following INAP operations are currently supported. 
 Operation Mnemonic Value 
(dec) Value (hex) 
ActivateServiceFiltering INOP_ActivateServiceFiltering 42 0x2a 
ActivityTest INOP_ActivityTest 55 0x37 
ActivityTestGPRS INOP_ActivityTestGPRS 70 0x46 
ApplyCharging INOP_ApplyCharging 35 0x23 
ApplyChargingGPRS INOP_ApplyChargingGPRS 71 0x47 
ApplyChargingReport INOP_ApplyChargingReport 36 0x24 
ApplyChargingReportGPRS INOP_ApplyChargingReport GPRS 72 0x48 
AssistRequestInstructions INOP_AssistRequestInstructions 16 0x10 
CallGap                           INOP_CallGap 41 0x29 
CallInformationReport INOP_CallInformationReport 44 0x2c 
CallInformationRequest INOP_CallInformationRequest 45 0x2d 
Cancel INOP_Cancel 53 0x35 
CancelGPRS INOP_CancelGPRS 73 0x49 
CollectInformation INOP_CollectInformation 27 0x1b 
ConfirmedNotificationProvided     INOP_ConfirmedNotification Provided  117 0x75 
ConfirmedReportCharging Information INOP_ConfirmedReportChargingInformation 119 0x77 
Connect INOP_Connect 20 0x14 
ConnectAssociation        INOP_ConnectAssociation 132 0x84 
ConnectGPRS INOP_ConnectGPRS 74 0x4a 
ConnectSMS INOP_ConnectSMS 62 0x3e 
ConnectToResource                 INOP_ConnectToResource 19 0x13 
Continue INOP_Continue 31 0x1f 
ContinueAssociation       INOP_ContinueAssociation 133 0x85 
ContinueGPRS INOP_ContinueGPRS 75 0x4b 
ContinueSMS INOP_ContinueSMS 65 0x41 
ContinueWithArgument  INOP_ContinueWithArgument 88 0x58 
ContinueWithArgument (for CAP v3) INOP_CAPv3_ContinueWithArgument 56 0x38 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
83 
 Operation Mnemonic Value 
(dec) Value (hex) 
CreateCallSegmentAssociation INOP_CreateCallSegmentAssociation 89 0x59 
DFC_with_Argument INOP_DFC_with_Argument 86 0x56 
DisconnectForwardConnection INOP_DisconnectForward Connection 18 0x12 
DisconnectLeg INOP_DisconnectLeg 90 0x5a 
EntityReleased                 INOP_EntityReleased 96 0x60 
EntityReleasedGPRS                 INOP_EntityReleasedGPRS 76 0x4d 
EstablishChargingRecord INOP_EstablishChargingRecord 112 0x70 
EstablishTemporaryConnection INOP_EstablishTemporary Connection 17 0x11 
EventNotificationCharging INOP_EventNotificationCharging 26 0x1a 
EventReportBCSM INOP_EventReportBCSM 24 0x18 
EventReportBCUSM          INOP_EventReportBCUSM 134 0x86 
EventReportGPRS INOP_EventReportGPRS 80 0x50 
EventReportSMS INOP_EventReportSMS 64 0x40 
FurnishChargingInformation INOP_FurnishCharging Information 34 0x22 
FurnishChargingInformationGPRS INOP_FurnishCharging InformationGPRS 77 0x4d 
FurnishChargingInformationSMS INOP_FurnishCharging InformationSMS 61 0x3d 
HandlingInformationRequest INOP_HandlingInformation Request 113 0x71 
HandlingInformationResult       INOP_HandlingInformation Result 114 0x72 
InitialAssociationDP      INOP_InitialAssociationDP 131 0x83 
InitialDP INOP_InitialDP 0 0x00 
InitialDPGPRS INOP_InitialDPGPRS 78 0x4e 
InitialDPSMS INOP_InitialDPSMS 60 0x3c 
InitiateAssociation    INOP_InitiateAssociation 123 0x7b 
InitiateCallAttempt INOP_InitiateCallAttempt 32 0x20 
ManageTriggerData    INOP_ManageTriggerData17 97 0x61 
MergeCallSegments     INOP_MergeCallSegments 91 0x5b 
MoveCallSegments                  INOP_MoveCallSegment  92 0x5c 
MoveLeg             INOP_MoveLeg 93 0x5d 
NetworkCapability INOP_NetworkCapability 115 0x73 
NotificationProvided  INOP_NotificationProvided 116 0x74 
PlayAnnouncement INOP_PlayAnnouncement 47 0x2f 
PlayTone INOP_PlayTone17 97 0x61 
PromptAndCollectUserInformation INOP_PromptAndCollectUser Information 48 0x30 
PromptAndReceive Message INOP_PromptAndReceive Message 107 0x6b 
                                                 
17 
 INOP_PlayTone and INOP_ManageTriggerData both use value 97. INOP_PlayTone is used for CAMEL v4 and 
INOP_ManageTriggerData is used for ETSI CS-2. 
5 Non-Primitive Interface 
84 
 Operation Mnemonic Value 
(dec) Value (hex) 
ProvideUserInformation      INOP_ProvideUserInformation  118 0x76 
ReleaseAssociation        INOP_ReleaseAssociation  126 0x7e 
ReleaseCall INOP_ReleaseCall 22 0x16 
ReleaseGPRS INOP_ReleaseGPRS 79 0x4f 
ReleaseSMS INOP_ReleaseSMS 66 0x42 
ReportChargingInformation INOP_ReportCharging Information 120 0x78 
ReportUTSI INOP_ReportUTSI 101 0x65 
RequestNotification INOP_RequestNotification 121 0x79 
RequestNotificationChargingEvent INOP_RequestNotification ChargingEvent 25 0x19 
RequestReportBCSMEvent INOP_RequestReportBCSM Event 23 0x17 
RequestReportBCUSMEvent INOP_RequestReportBCUSM Event 127 0x7f 
RequestReportGPRSEvent INOP_RequestReportGPRS Event 81 0x51 
RequestReportSMSEvent INOP_RequestReportSMSEvent 63 0x3f 
RequestReportUTSI INOP_RequestReportUTSI 98 0x62 
ResetTimer INOP_ResetTimer 33 0x21 
ResetTimerGPRS INOP_ResetTimerGPRS 82 0x52 
ResetTimerSMS INOP_ResetTimerSMS 67 0x43 
ScriptClose INOP_ScriptClose 111 0x6f 
ScriptEvent INOP_ScriptEvent 109 0x6d 
ScriptInformation INOP_ScriptInformation 108 0x6c 
ScriptRun INOP_ScriptRun 110 0x6e 
SendChargingInformation INOP_SendChargingInformation 46 0x2e 
SendChargingInformationGPRS INOP_SendChargingInformation GPRS 83 0x53 
SendSTUI     INOP_SendSTUI 100 0x64 
ServiceFilteringResponse INOP_ServiceFilteringResponse 43 0x2b 
SpecializedResourceReport INOP_SpecializedResource Report 49 0x31 
SplitLeg INOP_SplitLeg  95 0x5f 
The following AIN operations are currently supported:   
 Operation Mnemonic Value 
(dec) Value (hex) 
AnalyzeRoute AINOP_AnalyzeRoute 25857 0x6501 
Disconnect AINOP_Disconnect 25859 0x6503 
InfoAnalyzed AINOP_InfoAnalyzed 25603 0x6403 
InfoCollected AINOP_InfoCollected 25602 0x6402 
SendToResource AINOP_SendToReource 26113 0x6601 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
85 
B.4 Supported INAP Operation Parameters 
The parameters that may be placed in the component structure for each of 
the supported operations are summarized below.  
The mnemonics identified below are defined in the in_inc.h or ain_inc.h 
header file accompanying the API suite. They are used in the "param_name" 
parameter of the IN_set_component_param() and 
IN_get_component_param() API functions. 
There are two forms of parameter names: 
• INPN_ParameterName  
This is the form used for primitive parameters where there is only one of 
the specified parameter in each operation. 
For AIN the prefix is AINPN_, eg. AINPN_ ParameterName 
• INPN_ParameterName(n) 
This form is used in cases when more than one parameter of the specified 
parameter name is possible in the operation. This can occur when the 
ASN coding of a parameter is one of the forms shown below. 
For AIN the prefix is AINPN_, eg. AINPN_ParameterName(n). 
Case 1 
PrimParamA  ::= SEQUENCE Size (1 to 3) OF PrimType 
In the case 1 above the parameter name mnemonic for PrimParamA would be 
INPN_PrimParamA(n). In this form, the ‘n’ represents the position in the 
sequence. Thus, to get the first, second or third element in the sequence, the 
parameter names INPN_PrimParamA(0),  INPN_PrimParamA(1) or 
INPN_PrimParamA(2) should be used. 
5 Non-Primitive Interface 
86 
Case 2 
ConstTypeB ::= SEQUENCE { 
PrimParamC [0] PrimType 
} 
ConstParamB  ::= SEQUENCE Size (1 to 16) OF ConstTypeB 
In case 2, although the parameter PrimParamC is not a sequence itself, it is 
part of a constructed type which is. This means in order to identify the correct 
PrimParamC, the form INPN_PrimParamC(n) should be used. In this case, ‘n’ 
refers to the element in the sequence of ConstParamB. 
This form of parameter name makes it possible to use the parameter names 
in loops: 
for (n=0; n<3; n++) 
{ 
... 
IN_set_component_param(INPN_PrimParamC(n), len, data_ptr[n], 
cpt); 
... 
} 
Key 
Symbol Description 
M Mandatory The message will be discarded if the corresponding parameter 
is omitted. It must be present for the operation to be formatted.  
O Optional The parameter is not essential and need not be present in order 
to format or recover an operation.  
C Choice This parameter is part of a choice structure. Only one of the 
parameters in the choice should be present.  
D Default The parameter may be omitted from a message being sent. On 
reception, if the parameter is not present in the message, the 
default value for the parameter is recovered into the cpt 
structure.  
A ASN.1 Encoded This parameter is sent or received in raw ASN.1 coded form. 
The parameter is included to allow user defined extensions to 
the operations with the operation definition needing to be 
changed. If more than one encoded parameter is present in the 
case of Ellipsis data the component parameter will be a 
concatenation of all of the encoded data. 
For each letter, the number following it represents the depth of the sub-table 
in constructed parameters. For example, the ConnectToResource operation 
(Appendix B.5.5 ConnectToResource on page 89) has the IPRoutingAddress 
and Null parameters marked as C2. The depth of two shows they are part of 
the constructed parameter ResourceAddress marked as M. 
ResourceAddress (constructor, sub-table depth 1)  M 
 IPRoutingAddress (primative, sub-table depth 2) C2  
 Null (primative, sub-table depth 2) C2  
    
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
87 
B.5 ETSI CS-1 Operation Definitions 
B.5.1 InitialDP 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ServiceKey INPN_ServiceKey 3 0x3 M 
DialledDigits INPN_DialledDigits 4 0x4 O 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartyBuisness GroupID INPN_CallingPartyBuisness GroupID 7 0x7 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
CallingPartySubaddress INPN_CallingPartySubaddress 9 0x9 O 
CGEncountered INPN_cGEncountered 10 0xa O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
IPAvailable INPN_IPAvailable 12 0xc O 
LocationNumber INPN_LocationNumber 13 0xd O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceProfileIdentifier INPN_ServiceProfileIdentifier 16 0x10 O 
TerminalType INPN_TerminalType 17 0x11 O 
TriggerType INPN_TriggerType 18 0x12 O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O 
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O 
BearerCapability INPN_BearerCapability 23 0x17 O 
EventTypeBCSM INPN_EventTypeBCSM 24 0x18 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x20 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
88 
B.5.2 AssistRequestInstructions 
INOP_AssistRequestInstructions 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CorrelationID INPN_CorrelationID 31 0x1f M 
IPAvailable INPN_IPAvailable 12 0xc O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.3 EstablishTemporaryConnection 
INOP_EstablishTemporaryConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AssistingSSPIPRouting 
Address INPN_AssistingSSPIPRouting Address 102 0x66 M 
CorrelationID INPN_CorrelationID 31 0x1f O 
ScfID INPN_ScfID 38 0x26 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.4 DisconnectForwardConnection 
INOP_DisconnectForwardConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
89 
B.5.5 ConnectToResource  
INOP_ConnectToResource 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ResourceAddress M 
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2 
Null n/a   C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
If no IPRouting address is supplied a null resource address will be formatted. 
B.5.6 Connect 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting 
Address INPN_DestinationRouting Address(n) 
(n = 0) 
27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
CorrelationID INPN_CorrelationID 31 0x1f O 
CutAndPaste INPN_CutAndPaste 32 0x20 O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0cf O 
RouteList INPN_RouteList(n)  
(n = 0 to 2) 
35 
to 
37 
0x23 
to 
0x25 
O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ScfID INPN_ScfID 38 0x26 O 
ForwardingCondition INPN_ForwardingCondition 33 0x21 O 
ServiceInteraction 
Indicators INPN_ServiceInteraction Indicators 20 0x15 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
90 
B.5.7 ReleaseCall 
INOP_ReleaseCall 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cause INPN_Cause 41 0x29 O 
B.5.8 RequestReportBCSMEvent 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BCSMEvents (SEQUENCE, size = 0 to 15) M 
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 207 0xc0 to 0xcf M2 
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3 
DPSpecificCriteria O2 
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3 
ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The BCSMEvent structure can be repeated up to sixteen times for each 
operation. Replace ‘n’ with the position in the sequence of BCSMEvents 
starting from 0. The LegID for each event may be specified as either a 
SendingSideID or a ReceivingSideID. For some events, the LegID parameter 
is mandatory, e.g. events O-MidCall, O-Disconnect, T-MidCall and T- 
Disconnect in ETSI 300 374-1 must have this parameter present. For other 
events, the legID may take default values. Similarly, the DPSpecificCriteria 
for each event may be specified as either NumberOfDigits or 
ApplicationTimer. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
91 
B.5.9 EventReportBCSM 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeBCSM INPN_EventTypeBCSM(0) 192  
to 207 0xc0  to 0xcf M 
EventSpecificInformationBCSM O 
CollectedInfo C2 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
AnalyzedInformation C2 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 M3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
RouteSelectFailure C2 
FailureCause INPN_FailureCause 94 0x5e O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OcalledPartyBusy C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OnoAnswer C2 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Oanswer C2 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OmidCall C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Odisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TcalledPartyBusy C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TnoAnswer C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
5 Non-Primitive Interface 
92 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
Tanswer C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TmidCall C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tdisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
LegID O 
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
MiscCallInfo O 
MessageType 
Default = request(0) 
INPN_MessageType 56 0x38 D2 
The event specific information formatted or recovered is dependent on the 
value of INPN_EventTypeBCSM(0). For example, if its value is collectedInfo 
(2), then the format procedures will use the parameter 
INPN_CalledPartyNumber. 
B.5.10 RequestNotificationChargingEvent  
INOP_RequestNotificationChargingEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ChargingEvent (SEQUENCE, size = 1 to 16) M 
EventTypeCharging INPN_EventTypeCharging(n) 272 to 287 0x110 to 0x11f M2 
MonitorMode INPN_MonitorMode(n) 208  to 223 0xd0 to 0xdf M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C3 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
93 
B.5.11 EventNotificationCharging  
INOP_EventNotificationCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeCharging INPN_EventTypeCharging(0) 272 0x110 M 
EventSpecificInformationCharging INPN_EventSpecificInformationCharging 58 0x3a O 
LegID O 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
MonitorMode INPN_MonitorMode(0) 208  0xd0  M 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.12 CollectInformation  
INOP_CollectInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.13 Continue 
INOP_Continue 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.5.14 InitiateCallAttempt  
INOP_InitiateCallAttempt 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(n) 
(n = 0) 
27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O 
5 Non-Primitive Interface 
94 
INOP_InitiateCallAttempt 
Value Parameter Mnemonic 
dec hex 
 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.15 ResetTimer  
INOP_ResetTimer 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimerID INPN_TimerID 61 0x3d M 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.16 FurnishChargingInformation 
INOP_FurnishChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeId INPN_InvokeId 1 0x1 M 
FurnishCharging Information INPN_FCIBillingChargingCharacteristics 34 0x22 M 
B.5.17 ApplyCharging 
INOP_ApplyCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AchBillingCharging 
Characteristics INPN_AchBillingCharging Characteristics 52 0x34 M 
SendCalculationToSCP 
Indication 
Default = False 
INPN_SendCalculationToSCP 
Indication 53 0x35 D 
PartyToCharge O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
95 
B.5.18 ApplyChargingReport 
INOP_ApplyChargingReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CallResult INPN_CallResult 55 0x37 M 
B.5.19 CallGap  
INOP_CallGap 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
GapCriteria M 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2 
GapOnService C2 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CalledAddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressAndService C2 
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
LocationNumber INPN_LocationNumber 13 0xd O3 
GapIndicators M 
Gap Duration INPN_Gap_Duration 72 0x48 M2 
GapInterval INPN_GapInterval 73 0x49 M2 
ControlType INPN_ControlType 101 0x65 O 
GapTreatment O 
InformationToSend 
See InformationToSend (Sub-table) on page 96. 
C2 
ReleaseCause INPN_ReleaseCause 96 0x60 C2 
Both C2 
InformationToSend 
See InformationToSend (Sub-table) on page 96. 
M3 
ReleaseCause INPN_ReleaseCause 96 0x60 M3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
96 
InformationToSend (Sub-table) 
InformationToSend 
Value Parameter Mnemonic 
dec hex 
 
InbandInfo C 
MessageID O2 
ElementaryMessageID INPN_ElementaryMessageID 628 0x274 C3 
Text C3 
MessageContent INPN_MessageContent 65 0x41 M4 
Attributes INPN_Attributes                         66 0x42 O4 
ElementaryMessageIDs INPN_Elementary MessageIDs(n) 256 to 271 0x100 to 0x11f C3 
VariableMessage C3 
ElementaryMessageID INPN_Variable_MessageID 629 0x275 M4 
VariableParts M4 
Integer INPN_Integer(n) 528 to 532 0x210 to 0x214 C5 
Number INPN_Number(n) 533 to 537 0x215 to 0x210 C5 
Time INPN_Time(n) 538 to 541 0x21a to x21e C5 
Date INPN_Date(n) 542 to 547 0x21f to 0x223 C5 
Price INPN_Price(n) 548 to 552 0x224 to x229 C5 
NumberOfRepetitions INPN_NumberOfRepetitions 88 0x58 O2 
Duration INPN_Duration 89 0x59 O2 
Interval INPN_Interval 90 0x5a O2 
Ellipsis  
(present in CAP V3 only) INPN_InbandInfo_Ellipsis 1383 0x567 A2 
Tone C 
ToneID INPN_ToneID 64 0x40 M2 
Duration  INPN_Duration 89 0x59 O2 
Ellipsis  
(present in CAP V3 and 
CAP V4 only) 
INPN_Tone_Ellipsis 1375 0x55f A2 
DisplayInformation  
(absent in CAP V3 and 
CAP V4) 
INPN_DisplayInformation 91 0x5b C 
InfoToSend_Ellipsis  
(absent in CAP V3 and 
CAP V4) 
INPN_InfoToSend_Ellipsis 634 0x27a C 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
97 
B.5.20 ActivateServiceFiltering  
INOP_ActivateServiceFiltering 
Value  Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
FilteredCallTreatment    M 
SFBillingCharging 
Characteristics INPN_SFBillingCharging Characteristics 92 0x5c M2 
InformationToSend 
See InformationToSend (Sub-table) on page 96. 
O2 
MaximumNumberOf Counters INPN_MaximumNumberOf Counters 93 0x5d O2 
ReleaseCause INPN_ReleaseCause 96 0x60 O2 
FilteringCharacteristics M 
Interval INPN_Interval 90 0x5a C2 
NumberOfCalls INPN_NumberOfCalls 97 0x61 C2 
FilteringTimeout M 
Filtering Duration INPN_Filtering_Duration 98 0x62 C2 
StopTime INPN_StopTime 100 0x64 C2 
FilteringCriteria M 
ServiceKey INPN_ServiceKey 3 0x3 C2 
AddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3 
LocationNumber INPN_LocationNumber 13 0xd O3 
StartTime O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.21 ServiceFilteringResponse  
INOP_ServiceFilteringResponse 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CountersValue (SEQUENCE, size = 1 to 100)  M 
CounterID INPN_CounterID 328 
to 
427 
0x148 
to 
0x1ab 
M2 
5 Non-Primitive Interface 
98 
INOP_ServiceFilteringResponse 
Value Parameter Mnemonic 
dec hex 
 
CounterValue INPN_CounterValue 428 
to 
527 
0x1ac 
to 
0x20f 
M2 
FilteringCriteria M 
ServiceKey INPN_ServiceKey 3 0x3 C2 
AddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3 
LocationNumber INPN_LocationNumber 13 0xd O3 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.22 CallInformationReport  
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformationType INPN_RequestedInformationType 288 
to 
292 
0x120 
to 
0x124 
M2 
RequestedInformationValue M2 
CallAttemptEllapsedTimeValue  INPN_CallAttemptEllapsedTimeValue(n) 293 
to 
297 
0x125 
to 
0x129 
C3 
CallStopTimeValue INPN_CallStopTimeValue(n) 298 
to 
302 
0x12a 
to 
0x12e 
C3 
CallConnectedElapsedTimeValueINPN_CallConnectedElapsedTimeValue(n) 303 
to 
307 
0x12f to 
0x133 C3 
CalledAddressValue INPN_CalledAddressValue(n) 308 
to 
312 
0x134 
to 
0x138 
C3 
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 
to 
317 
0x139 
to 
0x13d 
C3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
99 
B.5.23 CallInformationRequest 
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformationType INPN_RequestedInformationType 288 
to 
292 
0x120 
to 
0x124 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.24 SendChargingInformation  
INOP_SendChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
SCIBillingCharging 
Characteristics INPN_SCIBillingCharging Characteristics 87 0x57 M 
LegID M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.25 PlayAnnouncement 
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
InformationToSend O 
InformationToSend 
See InformationToSend (Sub-table) on page 96. 
M2 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3bD 
RequestAnnouncement Complete 
Default = True 
INPN_RequestAnnouncement Complete 60 0x3c D 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70A 
5 Non-Primitive Interface 
100 
B.5.26 PromptAndCollectUserInformation 
INOP_ PromptAndCollectUserInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CollectedInfo M 
CollectedDigits M2 
MinimumNumberOfDigits 
Default = 1 
INPN_MinimumNumberOfDigits 74 0x3b D3 
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x3c M3 
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x3d O3 
CancelDigit INPN_CancelDigit 77 0x3e O3 
StartDigit INPN_StartDigit 78 0x3f O3 
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x40 O3 
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x41 O3 
Errortreatment 
Default = StfErrorAndInfo  
INPN_Errortreatment 81 0x42 D3 
InterDigitTimeOut 
Default = True 
INPN_InterDigitTimeOut 82 0x43 D3 
InterruptableAndInd 
Default = False 
INPN_InterruptableAnnInd 83 0x44 D3 
VoiceBack 
Default = False 
INPN_VoiceBack 84 0x45 D3 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
InformationToSend 
See InformationToSend (Sub-table) on page 96. 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.5.27 SpecializedResourceReport 
INOP_ SpecializedResourceReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
LinkedID INPN_LinkedID 2 0x2 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
101 
B.5.28 Cancel 
INOP_Cancel 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O 
 
If the parameter IPN_Cancel_InvokeID is not set, then the operation will be 
sent with the null parameter ‘All Requests’ indicating all operations on that 
dialogue should be cancelled. 
B.5.29 ActivityTest 
INOP_ ActivityTest 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
5 Non-Primitive Interface 
102 
B.6 ITU-T CS-1 Operation Definitions 
B.6.1 InitialDP 
 INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ServiceKey INPN_ServiceKey 3 0x3 O 
DialledDigits INPN_DialledDigits 4 0x4 O 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartyBuisness GroupID INPN_CallingPartyBuisness GroupID 7 0x7 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
CallingPartySubaddress INPN_CallingPartySubaddress 9 0x9 O 
CGEncountered INPN_cGEncountered 10 0xa O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
IPAvailable INPN_IPAvailable 12 0xc O 
LocationNumber INPN_LocationNumber 13 0xd O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
ServiceProfileIdentifier INPN_ServiceProfileIdentifier 16 0x10 O 
TerminalType INPN_TerminalType 17 0x12 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
TriggerType INPN_TriggerType 18 0x13 O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x14 O 
ServiceInteractionIndicators INPN_ServiceInteractionIndicators 20 0x15 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x16 O 
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x17 O 
BearerCapability INPN_BearerCapability 23 0x2a O 
EventTypeBCSM INPN_EventTypeBCSM 24 0x2a O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x2a O 
RedirectionInformation INPN_RedirectionInformation 26 0x2b O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
103 
B.6.2 AssistRequestInstructions  
INOP_AssistRequestInstructions 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CorrelationID INPN_CorrelationID 31 0x1f M 
IPAvailable INPN_IPAvailable 12 0xc O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.3 EstablishTemporaryConnection 
INOP_EstablishTemporaryConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AssistingSSPIPRouting 
Address INPN_AssistingSSPIPRouting Address 102 0x1 M 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224 
to 
239 
0xe0 
to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 
to 
255 
0xf0  
to  0xff C3 
CorrelationID INPN_CorrelationID 31 0x1f O 
ScfID INPN_ScfID 38 0x26 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.4 DisconnectForwardConnection 
INOP_DisconnectForwardConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
5 Non-Primitive Interface 
104 
B.6.5 ConnectToResource  
INOP_ConnectToResource 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ResourceAddress M 
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224  to 
239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 
255 0xf0  to  0xff C3 
Both O2 
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f M3 
LegID M3 
SendingSideID INPN_SendingSideID(n) 224  to 
239 0xe0 to 0xef O3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 
255 0xf0  to  0xff O3 
Null n/a   C2 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
If no IPRouting address is supplied a null resource address will be formatted. 
If both IPRouting address and LegID are supplied, the message will be 
appropriately formatted to handle the ‘both’ choice. 
B.6.6 Connect 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(n)  
(n = 0) 
27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
CorrelationID INPN_CorrelationID 31 0x1f O 
CutAndPaste INPN_CutAndPaste 32 0x20 O 
ForwardingCondition INPN_ForwardingCondition 33 0x21 O 
ISDNAccessRelated 
Information INPN_ISDNAccessRelated Information  34 0x22 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
105 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
RouteList INPN_RouteList(n)   
(n = 0 to 2) 
35 to 
37  0x23 to 
0x25 
O 
ScfID INPN_ScfID 38 0x26 O 
TravellingClassMark INPN_TravellingClassMark 39 0x27 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Carrier INPN_Carrier 40 0x28 O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.7 ReleaseCall 
INOP_ReleaseCall 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cause INPN_Cause 41 0x29 O 
B.6.8 RequestReportBCSMEvent 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BCSMEvents (SEQUENCE, size = 0 to 15) M 
EventTypeBCSM INPN_EventTypeBCSM(n) 192  to  207 0xc0 to 0xcf M2 
MonitorMode INPN_MonitorMode(n) 208  to 223 0xd0 to 0xdf M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C3 
DPSpecificCriteria O2 
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3 
5 Non-Primitive Interface 
106 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3 
BCSMEventCorrelationID INPN_BCSMEventCorrelationID 24 0x18 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The BCSMEvent structure can be repeated up to sixteen times for each 
operation. Replace ‘n’ with the position in the sequence of BCSMEvents 
starting from 0. The LegID for each event may be specified as either a 
SendingSideID or a ReceivingSideID. For some events, the LegID parameter 
is mandatory; for example, events O-MidCall, O-Disconnect, T-MidCall and T- 
Disconnect in ETSI 300 374-1 must have this parameter present. For other 
events, the legID may take default values. Similarly, the DPSpecificCriteria 
for each event may be specified as either NumberOfDigits or 
ApplicationTimer. 
B.6.9 EventReportBCSM 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeBCSM INPN_EventTypeBCSM(0) 192  to  207 0xc0 to 0xcf M 
CorrelationID INPN_CorrelationID 31 0x1f O 
EventSpecificInformationBCSM O 
CollectedInfo C2 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
AnalyzedInformation C2 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 M3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
RouteSelectFailure  C2 
FailureCause INPN_FailureCause 94 0x5e O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OcalledPartyBusy       C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OnoAnswer  C2 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
107 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
Oanswer       C2 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OmidCall       C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Odisconnect       C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TcalledPartyBusy       C2    
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TnoAnswer  C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tanswer       C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TmidCall       C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tdisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
LegID O 
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C2 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C2 
MiscCallInfo O 
MessageType  
Default = request(0) 
INPN_MessageType 56 0x38 D2 
DPAssignment INPN_DPAssignment 14 0xe O2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
108 
The event specific information formatted is dependent on the value of 
INPN_EventTypeBCSM(0). For example, if its value is collectedInfo (2), then 
the format procedures will expect INPN_CalledPartyNumber to be present. 
B.6.10 RequestNotificationChargingEvent  
INOP_RequestNotificationChargingEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ChargingEvent (SEQUENCE, size = 1 to 16) M 
EventTypeCharging INPN_EventTypeCharging(n) 272 to 287 0x110 to 0x11f M2 
MonitorMode INPN_MonitorMode(n) 208  to 223 0xd0 to 0xdf M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C3 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.11 EventNotificationCharging 
INOP_EventNotificationCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeCharging INPN_EventTypeCharging(0) 272 0x110 M 
EventSpecificInformationCharging INPN_EventSpecificInformationCharging 58 0x3a O 
LegID O 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
MonitorMode INPN_MonitorMode(0) 208  0xd0  M 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
109 
B.6.12 CollectInformation   
INOP_CollectInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
NumberingPlan INPN_NumberingPlan 107 0x6b O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
TravellingClassMark INPN_TravellingClassMark 39 0x27 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
DialledDigits INPN_DialledDigits 4 0x4 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.13 Continue  
INOP_Continue 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.6.14 InitiateCallAttempt  
INOP_InitiateCallAttempt 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(n) 
(n = 0) 
27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
ISDNAccessRelated 
Information INPN_ISDNAccessRelated Information 34 0x22 O 
TravellingClassMark INPN_TravellingClassMark 39 0x27 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x15 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
110 
B.6.15 ResetTimer  
INOP_ResetTimer 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimerID INPN_TimerID 61 0x3d M 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.16 FurnishChargingInformation 
INOP_FurnishChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeId INPN_InvokeId 1 0x1 M 
FurnishCharging Information INPN_FCIBillingChargingCharacteristics 34 0x22 M 
B.6.17 ApplyCharging 
INOP_ApplyCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AchBillingCharging Characteristics INPN_AchBillingCharging Characteristics 52 0x34 M 
PartyToCharge O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.18 ApplyChargingReport 
INOP_ApplyChargingReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CallResult INPN_CallResult 55 0x37 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
111 
B.6.19 CallGap  
INOP_CallGap 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
GapCriteria M 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2 
GapOnService C2 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CalledAddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressAndService C2 
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
LocationNumber INPN_LocationNumber 13 0xd O3 
GapIndicators M 
Gap Duration INPN_Gap_Duration 72 0x48 M2 
GapInterval INPN_GapInterval 73 0x49 M2 
ControlType INPN_ControlType 101 0x65 O 
GapTreatment O 
InformationToSend 
See InformationToSend (Sub-table) on page 96 
C2 
ReleaseCause INPN_ReleaseCause 96 0x60 C2 
Both C2 
InformationToSend 
See InformationToSend (Sub-table) on page 96 
M3 
ReleaseCause INPN_ReleaseCause 96 0x60 M3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
112 
B.6.20 ActivateServiceFiltering 
INOP_ActivateServiceFiltering 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
FilteredCallTreatment M 
SFBillingCharging Characteristics INPN_SFBillingCharging Characteristics 92 0x5c M2 
InformationToSend 
See InformationToSend (Sub-table) on page 96 
O2 
MaximumNumberOf Counters INPN_MaximumNumberOf Counters 93 0x5d O2 
ReleaseCause INPN_ReleaseCause 96 0x60 O2 
FilteringCharacteristics M 
Interval INPN_Interval 90 0x5a C2 
NumberOfCalls INPN_NumberOfCalls 97 0x61 C2 
FilteringTimeout M 
Filtering Duration INPN_Filtering_Duration 98 0x62 C2 
StopTime INPN_StopTime 100 0x64 C2 
FilteringCriteria M 
ServiceKey INPN_ServiceKey 3 0x3 C2 
AddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3 
LocationNumber INPN_LocationNumber 13 0xd O3 
StartTime O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
113 
B.6.21 ServiceFilteringResponse   
INOP_ServiceFilteringResponse 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CountersValue (SEQUENCE, size = 1 to 100)  M 
CounterID INPN_CounterID 328 to 427 0x148 to 0x1ab M2 
CounterValue INPN_CounterValue 428  to 527 0x1ac to 0x20f M2 
FilteringCriteria M 
ServiceKey INPN_ServiceKey 3 0x3 C2 
AddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3 
LocationNumber INPN_LocationNumber 13 0xd O3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ResponseCondition INPN_ResponseCondition 105 0x69 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.22 CallInformationReport  
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformationType INPN_RequestedInformationType 288 to 
292 0x120 to 0x124 M2 
RequestedInformationValue M2 
CallAttemptEllapsed TimeValue  INPN_CallAttemptEllapsedTime Value(n) 293 to 
297 0x125 to 0x129 C3 
CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 
302 0x12a to 0x12e C3 
CallConnectedElapsedTimeValueINPN_CallConnectedElapsedTimeValue(n) 303 to 
307 0x12f to 0x133 C3 
CalledAddressValue INPN_CalledAddressValue(n) 308 to 
312 0x134 to 0x138 C3 
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 to 
317 0x139 to 0x13d C3 
CorrelationID INPN_CorrelationID 31 0x1f O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
114 
B.6.23 CallInformationRequest  
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformationType INPN_RequestedInformationType 288 to 
292 0x120 to 0x124 M2 
CorrelationID INPN_CorrelationID 31 0x1f O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.24 SendChargingInformation  
INOP_SendChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
SCIBillingCharging Characteristics INPN_SCIBillingCharging Characteristics 87 0x57 M 
LegID M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.25 PlayAnnouncement 
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
O InformationToSend 
See InformationToSend (Sub-table) on page 96 
M2 
DisconnectFromIP 
Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
RequestAnnouncement 
Complete 
Default = True 
INPN_RequestAnnouncement Complete 60 0x3c D 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
115 
B.6.26 PromptAndCollectUserInformation 
INOP_ PromptAndCollectUserInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CollectedInfo M 
CollectedDigits M2 
MinimumNumberOfDigits 
Default = 1 
INPN_MinimumNumberOfDigits 74 0x4a D3 
MaximumNumberOfDigits INPN_MaximumNumberOfDigits 75 0x4b M3 
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3 
CancelDigit INPN_CancelDigit 77 0x4d O3 
StartDigit INPN_StartDigit 78 0x4e O3 
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3 
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3 
Errortreatment 
Default = StfErrorAndInfo  
INPN_Errortreatment 81 0x51 D3 
InterDigitTimeOut 
Default = True 
INPN_InterDigitTimeOut 82 0x52 D3 
InterruptableAndInd 
Default = False 
INPN_InterruptableAnnInd 83 0x53 D3 
VoiceBack 
Default = False 
INPN_VoiceBack 84 0x54 D3 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x55 D 
O InformationToSend 
InformationToSend (Sub-table) on page 96 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.6.27 SpecializedResourceReport 
INOP_ SpecializedResourceReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
LinkedID INPN_LinkedID 2 0x2 O 
5 Non-Primitive Interface 
116 
B.6.28 Cancel 
INOP_Cancel 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O 
If the parameter INPN_Cancel_InvokeID is not set, then the operation will be 
sent with the null parameter ‘All Requests’ indicating all operations on that 
dialogue should be cancelled. 
B.6.29 ActivityTest  
INOP_ ActivityTest 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
117 
B.7 CAMEL v1 Operation Definitions 
B.7.1 InitialDP 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ServiceKey INPN_ServiceKey 3 0x3 M 
DialledDigits INPN_DialledDigits 4 0x4 O 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartyBuisness GroupID INPN_CallingPartyBuisness GroupID 7 0x7 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
CallingPartySubaddress INPN_CallingPartySubaddress 9 0x9 O 
CGEncountered INPN_cGEncountered 10 0xa O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
IPAvailable INPN_IPAvailable 12 0xc O 
LocationNumber INPN_LocationNumber 13 0xd O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ServiceProfileIdentifier INPN_ServiceProfileIdentifier 16 0x10 O 
TerminalType INPN_TerminalType 17 0x11 O 
TriggerType INPN_TriggerType 18 0x12 O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O 
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O 
BearerCapability INPN_BearerCapability 23 0x17 O 
EventTypeBCSM INPN_EventTypeBCSM 24 0x18 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x20 O 
IMSI INPN_IMSI 130 0x81 O 
SubscriberState O 
AssumedIdle INPN_AssumedIdle 134 0x85 C2 
CamelBusy INPN_CamelBusy 135 0x86 C2 
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2 
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2 
5 Non-Primitive Interface 
118 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
LocationInfo O 
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O2 
GeographicalInformation INPN_GeographicalInformation 125 0x7d O2 
Vlr_Number INPN_Vlr_Number 126 0x7e O2 
LocationNumber INPN_LI_LocationNumber 127 0x7f O2 
CellIdOrLAIb O2 
CellIdFixedLength INPN_CellIdFixedLength 122 0x7a C3 
LAIFixedLength INPN_LAIFixedLength 123 0x7b C3 
ExtensionContainer INPN_ExtensionContainer 128 0x80 O2 
LocationInfo Ellipsis INPN_LocationInfo_Ellipsis 114 0x72 O2 
Ext_BasicSrvCode O 
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2 
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2 
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O 
MSCAddress INPN_MSCAddress 132 0x84 O 
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.7.2 Connect 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting 
Address(n) 
(n = 0) 
27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Generic Numbers (SEQUENCE, size 1 to 5) O 
GenericNumber INPN_GenericNumber(n) 67 to 
71 0x43 to 0x47 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
119 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
SuppressionOf 
Announcement INPN_SuppressionOf Announcement 109 0x6d O 
OCSIApplicable INPN_OCSIApplicable 110 0x6e O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.7.3 ReleaseCall 
INOP_ReleaseCall 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cause INPN_Cause 41 0x29 O 
B.7.4 RequestReportBCSMEvent 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BCSMEvents (SEQUENCE, size = 0 to 15) M 
EventTypeBCSM INPN_EventTypeBCSM(n) 192  to  207 0xc0 to 0xcf M2 
MonitorMode INPN_MonitorMode(n) 208  to 223 0xd0 to 0xdf M2 
LegID O2    
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C3 
DPSpecificCriteria O2    
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3 
ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The BCSMEvent structure can be repeated up to sixteen times for each 
operation. Replace ‘n’ with the position in the sequence of BCSMEvents 
starting from 0. The LegID for each event may be specified as either a 
SendingSideID or a ReceivingSideID. For some events the LegID parameter is 
mandatory. For other events, the legID may take default values. Similarly, 
the DPSpecificCriteria for each event may be specified as either 
NumberOfDigits or ApplicationTimer. 
5 Non-Primitive Interface 
120 
B.7.5 EventReportBCSM  
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeBCSM INPN_EventTypeBCSM(0) 192  to  207 0xc0 to 0xcf M 
EventSpecificInformationBCSM O 
Odisconnect  C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tdisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
LegID O 
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C2 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C2 
MiscCallInfo O 
MessageType 
Default = request(0) 
INPN_MessageType 56 0x38 D2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The event-specific information formatted or recovered is dependent on the 
value of INPN_EventTypeBCSM(0). For example, if its value is Tdisconnect, 
then the format procedures will use the parameter INPN_ReleaseCause. 
B.7.6 Continue 
INOP_Continue 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.7.7 ActivityTest  
INOP_ ActivityTest 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
121 
B.8 CAMEL v2 Operation Definitions 
B.8.1 InitialDP 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ServiceKey INPN_ServiceKey 3 0x3 M 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartyBuisness GroupID INPN_CallingPartyBuisness GroupID 7 0x7 O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
LocationNumber INPN_LocationNumber 13 0xd O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O 
BearerCapability INPN_BearerCapability 23 0x17 O 
EventTypeBCSM INPN_EventTypeBCSM 24 0x18 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
IMSI INPN_IMSI 130 0x81 O 
SubscriberState O 
AssumedIdle INPN_AssumedIdle 134 0x86 C2 
CamelBusy INPN_CamelBusy 135 0x87 C2 
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2 
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2 
LocationInfo O 
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O2 
GeographicalInformation INPN_GeographicalInformation 125 0x7d O2 
Vlr_Number INPN_Vlr_Number 126 0x7e O2 
LocationNumber INPN_LI_LocationNumber 127 0x7f O2 
CellIdOrLAIb O2 
CellIdFixedLength INPN_CellIdFixedLength 122 0x7a C3 
LAIFixedLength INPN_LAIFixedLength 123 0x7b C3 
ExtensionContainer INPN_ExtensionContainer 128 0x80 O2 
LocationInfo Ellipsis INPN_LocationInfo_Ellipsis 114 0x72 O2 
5 Non-Primitive Interface 
122 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
Ext_BasicSrvCode O 
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2 
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2 
CallReferenceNumber INPN_CallReferenceNumber 131 0x82 O 
MSCAddress INPN_MSCAddress 132 0x83 O 
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O 
TimeAndTimezone INPN_TimeAndTimezone 132 0x84 O 
GSM_Forwarding Pending INPN_GSM_ForwardingPending 133 0x85 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
IDPArgExtension O 
NACarrierInfo O2 
NACarrierID INPN_NACarrierID 140 0x8c O3 
NACICSelectionType INPN_NACICSelectionType 139 0x8b O3 
NACarrierInfo_Ellipsis INPN_NACarrierInfo_Ellipsis 116 0x74 O3 
NAOliInfo INPN_NAOliInfo 141 0x8d O2 
NAChargeNumber INPN_NAChargeNumber 142 0x8e O2 
InitialDPArgExt_Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 O2 
B.8.2 AssistRequestInstructions  
INOP_AssistRequestInstructions 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CorrelationID INPN_CorrelationID 31 0x1f M 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
123 
B.8.3 EstablishTemporaryConnection 
INOP_EstablishTemporaryConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AssistingSSPIPRouting Address INPN_AssistingSSPIPRouting Address 102 0x1 M 
CorrelationID INPN_CorrelationID 31 0x1f O 
ScfID INPN_ScfID 38 0x26 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ServiceInteractionIndicatorsTwo O 
BothwayThrough ConnectionIndicator INPN_BothwayThrough 
ConnectionIndicator 111 0x6f O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.8.4 DisconnectForwardConnection 
INOP_DisconnectForwardConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.8.5 ConnectToResource  
INOP_ConnectToResource 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ResourceAddress M    
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2 
Null n/a   C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
ServiceInteractionIndicatorsTwo O 
BothwayThrough 
ConnectionIndicator INPN_BothwayThrough ConnectionIndicator 111 0x6f O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
124 
B.8.6 Connect 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(n) 
(n = 0) 
27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Generic Numbers (SEQUENCE, size 1 to 5) O 
GenericNumber INPN_GenericNumber(n) 67 to 
71 0x43 to 
0x47 
O 
SuppressionOf Announcement INPN_SuppressionOf Announcement 109 0x6d O 
OCSIApplicable INPN_OCSIApplicable 110 0x6e O 
Ellipsis INPN_Ellipsis 112 0x70 A 
NA-Info O 
NACarrierInfo O2 
NACarrierID INPN_NACarrierID 140 0x8c O3 
NACICSelectionType INPN_NACICSelectionType 139 0x8b O3 
NACarrierInfo_Ellipsis INPN_NACarrierInfo_Ellipsis 116 0x74 O3 
NAOliInfo INPN_NAOliInfo 141 0x8d O2 
NAChargeNumber INPN_NAChargeNumber 142 0x8e O2 
NAInfo_Ellipsis INPN_NAInfo_Ellipsis 115 0x73 O2 
B.8.7 ReleaseCall 
INOP_ReleaseCall 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cause INPN_Cause 41 0x29 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
125 
B.8.8 RequestReportBCSMEvent 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BCSMEvents (SEQUENCE, size = 1 to 16) M 
EventTypeBCSM INPN_EventTypeBCSM(n) 192  to  207 0xc0 to 0xcf M2 
MonitorMode INPN_MonitorMode(n) 208  to 223 0xd0 to 0xdf M2 
LegID O2    
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C3 
DPSpecificCriteria O2    
NumberOfDigits INPN_NumberOfDigits(n) 160 to 175 0xa0 to 0xaf C3 
ApplicationTimer INPN_ApplicationTimer(n) 176 to 191 0xb0 to 0xbf C3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The BCSMEvent structure can be repeated up to sixteen times for each 
operation. Replace ‘n’ with the position in the sequence of BCSMEvents 
starting from 0. The LegID for each event may be specified as either a 
SendingSideID or a ReceivingSideID. For some events, the LegID parameter 
is mandatory; for example, events O-MidCall, O-Disconnect, T-MidCall and T- 
Disconnect in CAMEL CAP v2 must have this parameter present. For other 
events, the legID may take default values. Similarly, the DPSpecificCriteria 
for each event may be specified as either NumberOfDigits or 
ApplicationTimer. 
B.8.9 EventReportBCSM 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeBCSM INPN_EventTypeBCSM(0) 192  to 207 0xc0  to 0xcf M 
EventSpecificInformationBCSM O 
RouteSelectFailure  C2 
FailureCause INPN_FailureCause 94 0x5e O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OcalledPartyBusy       C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OnoAnswer  C2 
5 Non-Primitive Interface 
126 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Oanswer       C2 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Odisconnect       C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TcalledPartyBusy       C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TnoAnswer  C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tanswer       C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tdisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
LegID O 
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C2 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0  to  0xff C2 
MiscCallInfo O 
MessageType  
Default = request(0) 
INPN_MessageType 56 0x38 D2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The event-specific information formatted or recovered is dependent on the 
value of INPN_EventTypeBCSM(0). For example, if its value is Tdisconnect, 
then the format procedures will use the parameter INPN_ReleaseCause. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
127 
B.8.10 Continue  
INOP_Continue 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.8.11 ResetTimer  
INOP_ResetTimer 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimerID INPN_TimerID 61 0x3d M 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.8.12 FurnishChargingInformation 
INOP_FurnishChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeId INPN_InvokeId 1 0x1 M 
FCIBCCCAMELsequence1 M 
FreeFormatData INPN_FreeFormData 319 0x13f M2 
PartyToCharge O2 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3 
AppendFreeFormatData INPN_AppendFreeFormData 637 0x27d O2 
B.8.13 ApplyCharging 
INOP_ApplyCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AchBillingCharging Characteristics M 
TimeDurationCharging M2 
MaxCallPeriodDuration INPN_MaxCallPeriodDuration 159 0x9f M3 
ReleaseIfDurationExceeded O3 
5 Non-Primitive Interface 
128 
INOP_ApplyCharging 
Value Parameter Mnemonic 
dec hex 
 
Tone 
Default = False 
INPN_Tone 778 0x30a D4 
Ellipsis INPN_RelIfDurEx_Ellipsis 4179 0x1053 A4 
Extensions (see Appendix B.14 Operation Extensions on page 257) O4 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O3 
PartyToCharge O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.8.14 ApplyChargingReport 
INOP_ApplyChargingReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CallResult INPN_CallResult 55 0x37 M 
B.8.15 CallInformationReport  
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformationType INPN_RequestedInformationType 288 to 
292 0x120 to 0x124 M2 
RequestedInformationValue M2 
CallAttemptEllapsedTimeValue  INPN_CallAttemptEllapsedTimeValue(n) 293 to 
297 0x125 to 0x129 C3 
CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 
302 0x12a to 0x12e C3 
CallConnectedElapsedTimeValueINPN_CallConnectedElapsedTimeValue(n) 303 to 
307 0x12f to 0x133 C3 
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 to 
317 0x139 to 0x13d C3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
LegID O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
129 
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
SendingSideID INPN_SendingSideID(n) 224  
to 239 0xe0 to 0xef C2 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 
255 0xf0  to  0xff C2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.8.16 CallInformationRequest  
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformation Type INPN_RequestedInformation Type 288 to 292 0x120 to 0x124 M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
LegID O 
SendingSideID INPN_SendingSideID(n) 224  to 239 0xe0 to 0xef C2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.8.17 SendChargingInformation 
INOP_SendChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CAMEL SCIBillingCharging Characteristics M 
AOC BeforeAnswer C2 
CAMEL AOC BeforeAnswer INPN_CAMEL_AOC_ BeforeAnswer 143 0x8f Note18 
InitialCAI M3 
Initial CAI E1 INPN_Initial_CAI_E1 144 0x90 O4 
Initial CAI E2 INPN_Initial_CAI_E2 145 0x91 O4 
Initial CAI E3 INPN_Initial_CAI_E3 146 0x92 O4 
Initial CAI E4 INPN_Initial_CAI_E4 147 0x93 O4 
Initial CAI E5 INPN_Initial_CAI_E5 148 0x94 O4 
Initial CAI E6 INPN_Initial_CAI_E6 149 0x95 O4 
                                                 
18 
INPN_CAMEL_AOC_BeforeAnswer will not be formatted or decoded. It is used to determine if the AOC is for before or 
after answer. If present, AOCBeforeAnswer will be sent, otherwise AOCAfterAnswer will be sent. The data stored in the 
INPN_CAMEL_AOC_BeforeAnswer may be of any value. 
5 Non-Primitive Interface 
130 
INOP_SendChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
Initial CAI E7 INPN_Initial_CAI_E7 150 0x96 O4 
AOC Subsequent O3 
Subsequent CAI E1 INPN_Subsequent_CAI_E1 151 0x97 O4 
Subsequent CAI E2 INPN_Subsequent_CAI_E2 152 0x98 O4 
Subsequent CAI E3 INPN_Subsequent_CAI_E3 153 0x99 O4 
Subsequent CAI E4 INPN_Subsequent_CAI_E4 154 0x9a O4 
Subsequent CAI E5 INPN_Subsequent_CAI_E5 155 0x9b O4 
Subsequent CAI E6 INPN_Subsequent_CAI_E6 156 0x9c O4 
Subsequent CAI E7 INPN_Subsequent_CAI_E7 157 0x9d O4 
AOC Subsequent C2 
Subsequent CAI E1 INPN_Subsequent_CAI_E1 151 0x97 O3 
Subsequent CAI E2 INPN_Subsequent_CAI_E2 152 0x98 O3 
Subsequent CAI E3 INPN_Subsequent_CAI_E3 153 0x99 O3 
Subsequent CAI E4 INPN_Subsequent_CAI_E4 154 0x9a O3 
Subsequent CAI E5 INPN_Subsequent_CAI_E5 155 0x9b O3 
Subsequent CAI E6 INPN_Subsequent_CAI_E6 156 0x9c O3 
Subsequent CAI E7 INPN_Subsequent_CAI_E7 157 0x9d O3 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O2 
SendingSideID M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 M 
Extensions O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.8.18 PlayAnnouncement 
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
O InformationToSend 
See InformationToSend (Sub-table) on page 96 
M2 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
RequestAnnouncement Complete 
Default = True 
INPN_RequestAnnouncement Complete 60 0x3c D 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
131 
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
dec hex 
 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.8.19 PromptAndCollectUserInformation 
INOP_ PromptAndCollectUserInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CollectedInfo M 
CollectedDigits M2 
MinimumNumberOfDigits  
Default = 1 
INPN_MinimumNumberOfDigits 74 0x3b D3 
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x3c M3 
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x3d O3 
CancelDigit INPN_CancelDigit 77 0x3e O3 
StartDigit INPN_StartDigit 78 0x3f O3 
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x40 O3 
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x41 O3 
Errortreatment  
Default = StfErrorAndInfo  
INPN_Errortreatment 81 0x42 D3 
InterDigitTimeOut 
 Default = True 
INPN_InterDigitTimeOut 82 0x43 D3 
InterruptableAndInd  
Default = False 
INPN_InterruptableAnnInd 83 0x44 D3 
VoiceBack  
Default = False 
INPN_VoiceBack 84 0x45 D3 
DisconnectFromIP Forbidden  
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
O InformationToSend 
See InformationToSend (Sub-table) on page 96 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
132 
B.8.20 SpecializedResourceReport 
INOP_ SpecializedResourceReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
LinkedID INPN_LinkedID 2 0x2 O 
B.8.21 Cancel 
INOP_Cancel 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O 
If the parameter IPN_Cancel_InvokeID is not set, then the operation will be 
sent with the null parameter ‘All Requests’ indicating all operations on that 
dialogue should be cancelled. 
B.8.22 ActivityTest  
INOP_ ActivityTest 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
133 
B.9 CAMEL v3 Operation Definitions 
B.9.1 InitialDP 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ServiceKey INPN_ServiceKey 3 0x3 M 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
cGEncountered INPN_cGEncountered 10 0xa O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
LocationNumber INPN_LocationNumber 13 0xd O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O 
BearerCapability  
BearerCapability INPN_BearerCapability 23 0x17 O2 
Ellipsis INPN_BearerCap_Ellipsis 119 0x77 O2 
EventTypeBCSM INPN_EventTypeBCSM 24 0x18 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Cause INPN_Cause 41 0x29 O 
O ServiceInteractionIndicatorsTwo 
See ServiceInteractionIndicatorsTwo (sub-table) on page 134 
O2 
Carrier INPN_Carrier 40 0x28 O 
CUG-Index INPN_CUG_Index 644 0x284 O 
CUG-Interlock INPN_CUG_Interlock 645 0x285 O 
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
IMSI INPN_IMSI 130 0x81 O 
SubscriberState O 
AssumedIdle INPN_AssumedIdle 134 0x86 C2 
CamelBusy INPN_CamelBusy 135 0x87 C2 
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2 
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2 
5 Non-Primitive Interface 
134 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
O LocationInformation 
See LocationInformation (sub-table) on page 135 
O2 
Ext_BasicSrvCode O 
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2 
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2 
CallReferenceNumber INPN_CallReferenceNumber 131 0x82 O 
MSCAddress INPN_MSCAddress 132 0x83 O 
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O 
TimeAndTimezone INPN_TimeAndTimezone 132 0x84 O 
GSM_Forwarding Pending INPN_GSM_ForwardingPending 133 0x85 O 
IDPArgExtension O 
GMSC Address INPN_GMSC_Address 653 0x28d O2 
InitialDPArgExt_Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
ServiceInteractionIndicatorsTwo (sub-table) 
ServiceInteractionIndicatorsTwo 
Value Parameter Mnemonic 
dec hex 
 
ForwardServiceInteractionInd O 
ConferenceTreatment 
Indicator 
INPN_Fw_Conference TreatmentInd 711 0x2c7 O2 
CallDiversionTreatment 
Indicator 
INPN_CallDiversionTreatment 
Ind 
712 0x2c8 O2 
CallingPartyRestriction Indicator INPN_CallingPartyRestriction Ind 714 0x2ca O2 
Ellipsis INPN_ForwardServIntInd_Ellipsis 1402 0x57a A2 
BackwardServiceInteractionInd O 
ConferenceTreatmentIndicator INPN_Bw_Conference TreatmentInd 710 0x2c6 O2 
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O2 
Ellipsis INPN_BackwardServIntInd _Ellipsis 1403 0x57b A2 
BothwayThrough ConnectionInd INPN_BothwayThrough 
ConnectionIndicator 111 0x6f O 
ConnectedNumber Treatment INPN_ConnectedNumber Treatment 718 0x2ce O 
NonCUGCall INPN_NonCUGCall 663 0x297 O 
HoldTreatmentIndicator INPN_HoldTreatmentInd 656 0x290 O 
CWTreatmentIndicator INPN_CWTreatmentInd 647 0x287 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
135 
ServiceInteractionIndicatorsTwo 
Value Parameter Mnemonic 
dec hex 
 
ECTTreatmentindicator INPN_ECTTreatmentind 709 0x2c5 O 
Ellipsis INPN_ServIntActInd2_Ellipsis 1404 0x57c A 
LocationInformation (sub-table) 
LocationInformation  
Value Parameter Mnemonic 
dec hex 
 
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O 
GeographicalInformation INPN_GeographicalInformation 125 0x7d O 
Vlr_Number INPN_Vlr_Number 126 0x7e O 
LocationNumber INPN_LI_LocationNumber 127 0x7f O 
CellGlobalIdOrServiceAreaIdOrLAI O 
CellGlobalIdOrServiceAreaIdFixedLength INPN_CellIdFixedLength 122 0x7a C2 
LAIFixedLength INPN_LAIFixedLength 123 0x7b C2 
ExtensionContainer INPN_ExtensionContainer 128 0x80 O 
Ellipsis INPN_LocationInfo_Ellipsis 114 0x72 A 
SelectLSA-Id INPN_SelectLSAIdentity 765 0x2fd O 
ISDNAddressString INPN_ISDNAddressString 726 0x2d6 O 
GeodeticInformation INPN_GeodeticInformation 4229 0x1085 O 
CurrentLocationRetrieved INPN_CurLocRetrieved 4228 0x1084 O 
SAI-Present INPN_SAIPresent 763 0x2fb O 
B.9.2 AssistRequestInstructions  
INOP_AssistRequestInstructions 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CorrelationID INPN_CorrelationID 31 0x1f M 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
136 
B.9.3 EstablishTemporaryConnection 
INOP_EstablishTemporaryConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AssistingSSPIPRouting Address INPN_AssistingSSPIPRouting 
Address 102 0x1 M 
CorrelationID INPN_CorrelationID 31 0x1f O 
ScfID INPN_ScfID 38 0x26 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Carrier INPN_Carrier 40 0x28 O 
O ServiceInteractionIndicatorsTwo 
See ServiceInteractionIndicatorsTwo (sub-table) on page 134 
O2 
NaOliInfo INPN_NaOliInfo 141 0x8d O 
ChargeNumber INPN_ChargeNumber 642 0x282 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.4 DisconnectForwardConnection 
INOP_DisconnectForwardConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.9.5 ConnectToResource  
INOP_ConnectToResource 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ResourceAddress    M 
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2 
None INPN_None 650 0x28a C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
O ServiceInteractionIndicatorsTwo 
See ServiceInteractionIndicatorsTwo (sub-table) on page 134 
O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
137 
B.9.6 Connect 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Carrier INPN_Carrier 40 0x28 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
GenericNumbers (SEQUENCE, size = 1 to 5) O 
GenericNumber INPN_GenericNumber(n) 67 to 71 0x43 to 
0x47 O2 
O ServiceInteractionIndicatorsTwo 
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) 
O2 
ChargeNumber INPN_ChargeNumber 642 0x282 O 
CUG-Interlock INPN_CUG_Interlock 645 0x285 O 
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
Suppression of Announcement INPN_SuppressionOfAnnouncement 109 0x6d O 
OCSIApplicable INPN_OCSIApplicable 110 0x6e O 
NaOliInfo INPN_NAOliInfo 141 0x8d O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.7 ReleaseCall 
INOP_ReleaseCall 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cause INPN_Cause 41 0x29 O 
5 Non-Primitive Interface 
138 
B.9.8 RequestReportBCSMEvent 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BCSMEvents (SEQUENCE, size = 1 to 10) M 
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to  
201 0xc0 to 0xc9 M2 
MonitorMode INPN_MonitorMode(n) 208  to 
217 0xd0 to 0xd9 M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224  to 
233 0xe0 to 0xe9 C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 
249 0xf0  to  0xf9 C3 
DpSpecificCriteria    O2 
ApplicationTimer INPN_ApplicationTimer(n) 176 to 
185 0xb0 to 0xb9 O3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The BCSMEvent structure can be repeated up to ten times for each operation. 
Replace ‘n’ with the position in the sequence of BCSMEvents starting from 0. 
The LegID for each event may be specified as either a SendingSideID or a 
ReceivingSideID. For some events, the LegID parameter is mandatory; for 
example, events O-MidCall, O-Disconnect, T-MidCall and T-Disconnect in 
CAMEL CAP v2 must have this parameter present. For other events, the legID 
may take default values. 
B.9.9 EventReportBCSM 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M 
EventSpecificInformationBCSM O 
RouteSelectFailure C2 
FailureCause INPN_FailureCause 94 0x5e O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OcalledPartyBusy C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
139 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
OnoAnswer C2 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Oanswer C2 
DestinationAddress INPN_DestinationAddr 648 0x288 O3 
Or-Call INPN_OrCall 664 0x298 O3 
ForwardedCall INPN_ForwardedCall 651 0x28b O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Odisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TcalledPartyBusy    C2 
BusyCause INPN_BusyCause 95 0x5f O3 
CallForwarded INPN_CallForwarded 639 0x27f O3 
RouteNotPermitted INPN_RouteNotPermitted 753 0x2f1 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TnoAnswer C2 
CallForwarded INPN_CallForwarded 639 0x27f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tanswer  C2 
DestinationAddress INPN_DestinationAddr 648 0x288 O3 
Or-Call INPN_OrCall 664 0x298 O3 
ForwardedCall INPN_ForwardedCall 651 0x28b O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tdisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
LegID O 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2 
MiscCallInfo O 
MessageType INPN_MessageType 56 0x38 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
140 
The event-specific information formatted or recovered is dependent on the 
value of INPN_EventTypeBCSM(0). For example, if its value is Tdisconnect, 
then the format procedures will use the parameter INPN_ReleaseCause. 
B.9.10 Continue  
INOP_Continue 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.9.11 ResetTimer  
INOP_ResetTimer 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimerID INPN_TimerID 61 0x3d M 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.12 FurnishChargingInformation 
INOP_FurnishChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeId INPN_InvokeId 1 0x1 M 
FCIBCCCAMELsequence1 M 
FreeFormatData INPN_FreeFormData 319 0x13f M2 
PartyToCharge O2 
SendingSideID INPN_SendingSideID(0) 224 0xe0 O3 
AppendFreeFormatData 
Default = overwrite (0) 
INPN_AppendFreeFormData 637 0x27d D2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
141 
B.9.13 ApplyCharging 
INOP_ApplyCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimeDurationCharging M 
MaxCallPeriodDuration INPN_MaxCallPeriodDuration 159 0x9f M2 
ReleaseIfDuration Exceeded 
Default = False 
INPN_ReleaseIfDurExceeded 750 0x2ee D2 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O2 
Tone  
Default = False 
INPN_Tone 778 0x30a D2 
Extensions2 (see Appendix B.14 Operation Extensions on page 257) O2 
Ellipsis INPN_TmDurChar_Ellipsis 1374 0x55e A2 
PartyToCharge O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
 
B.9.14 ApplyChargingReport 
INOP_ApplyChargingReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CAMEL-CallResult M 
TimeDurationChargingResult M2 
PartyToCharge M3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 M4 
TimeInformation M3 
TimeIfNoTariffSwitch INPN_TimeIfNoTariffSwitch 776 0x308 C4 
TimeIfTariffSwitch C4 
TimeSinceTariffSwitch INPN_TmSinceTariffSwch 777 0x309 M5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O5 
CallActive 
Default = True 
INPN_CallActive 638 0x27e D3 
CallReleasedAtTcpExpiry INPN_CallReleasedAtTcpExp 640 0x280 O3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O3 
Ellipsis INPN_TmDurCharRes_Ellipsis 1373 0x55d O3 
5 Non-Primitive Interface 
142 
B.9.15 CallGap 
INOP_CallGap 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
GapCriteria M 
BasicGapCriteria C1 
CalledAddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 O3 
CallingAddressAndService C2 
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 O3 
GapOnService C2 
ServiceKey INPN_ServiceKey 3 0x3 M3 
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 O3 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2 
CompoundGapCriteria C1 
CompoundCalledAddressAndService C2 
CalledAddressValue INPN_ComCalledAddressValue 894 0x37e M3 
ServiceKey INPN_ComServiceKey 893 0x37d M3 
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 O3 
CompoundCallingAddressAndService C2 
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3 
ServiceKey INPN_ComServiceKey 893 0x37d M3 
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 O3 
CompoundGapOnService C2 
ServiceKey INPN_ComServiceKey 893 0x37d M3 
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 O3 
CompoundCalledAddressValue INPN_ComCalledAddressValue 894 0x37e C2 
ScfId INPN_ScfID 38 0x26 O2 
GapIndicators M 
GapDuration INPN_Gap_Duration 72 0x48 M2 
GapInterval INPN_GapInterval 73 0x49 M2 
Ellipsis INPN_GapInd_Ellipsis 1411 0x583 A2 
ControlType INPN_ControlType 101 0x65 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
143 
INOP_CallGap 
Value Parameter Mnemonic 
dec hex 
 
GapTreatment O 
C2 InformationToSend 
See InformationToSend (Sub-table) on page 96 
O3 
ReleaseCause INPN_ReleaseCause 96 0x60 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.16 CallInformationReport  
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationList (SEQUENCE, size = 1 to 4)  M 
RequestedInformationType INPN_RequestedInformationType 288 to 
291 0x120 to 0x123 M2 
RequestedInformationValue M2 
CallAttemptEllapsedTimeValue  INPN_CallAttemptEllapsedTimeValue(n) 293 to 
296 0x125 to 0x128 C3 
CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 
301 0x12a to 0x12d C3 
CallConnectedElapsedTimeValueINPN_CallConnectedElapsedTimeValue(n) 303 to 
306 0x12f to 0x132 C3 
ReleaseCauseValue INPN_ReleaseCauseValue(n) 313 to 
316 0x139 to 0x13c C3 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
LegID O 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
144 
B.9.17 CallInformationRequest  
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 4)  M 
RequestedInformation Type(n) INPN_RequestedInformation Type(n) 288 
to 
291 
0x120 
to 
0x123 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
LegID O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.18 SendChargingInformation  
INOP_SendChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CAMEL-SCIBillingChargingCharacteristics M 
AOCBeforeAnswer C2 
AOCInitial M3 
E1 INPN_Initial_CAI_E1 144 0x90 O4 
E2 INPN_Initial_CAI_E2 145 0x91 O4 
E3 INPN_Initial_CAI_E3 146 0x92 O4 
E4 INPN_Initial_CAI_E4 147 0x93 O4 
E5 INPN_Initial_CAI_E5 148 0x94 O4 
E6 INPN_Initial_CAI_E6 149 0x95 O4 
E7 INPN_Initial_CAI_E7 150 0x96 O4 
AOCSubsequent O3 
CAI-GSM0224 M4 
E1 INPN_Subsequent_CAI_E1 151 0x97 O5 
E2 INPN_Subsequent_CAI_E2 152 0x98 O5 
E3 INPN_Subsequent_CAI_E3 153 0x99 O5 
E4 INPN_Subsequent_CAI_E4 154 0x9a O5 
E5 INPN_Subsequent_CAI_E5 155 0x9b O5 
E6 INPN_Subsequent_CAI_E6 156 0x9c O5 
E7 INPN_Subsequent_CAI_E7 157 0x9d O5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
145 
INOP_SendChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
AOCAfterAnswer C2 
AOCSubsequent O3 
CAI-GSM0224 M4 
E1 INPN_Subsequent_CAI_E1 151 0x97 O5 
E2 INPN_Subsequent_CAI_E2 152 0x98 O5 
E3 INPN_Subsequent_CAI_E3 153 0x99 O5 
E4 INPN_Subsequent_CAI_E4 154 0x9a O5 
E5 INPN_Subsequent_CAI_E5 155 0x9b O5 
E6 INPN_Subsequent_CAI_E6 156 0x9c O5 
E7 INPN_Subsequent_CAI_E7 157 0x9d O5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4 
PartyToCharge M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Note: INPN_CAMEL_AOC_BeforeAnswer will not be formatted or decoded. It is used to 
determine if the AOC is for before or after answer. If present, AOCBeforeAnswer 
will be sent, otherwise AOCAfterAnswer will be sent. The data stored in the 
INPN_CAMEL_AOC_BeforeAnswer may be of any value. 
B.9.19 PlayAnnouncement 
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
M InformationToSend 
See InformationToSend (Sub-table) on page 96 
M2 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
RequestAnnouncement Complete 
Default = True 
INPN_RequestAnnouncement Complete 60 0x3c D 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
146 
B.9.20 PromptAndCollectUserInformation 
INOP_ PromptAndCollectUserInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CollectedInfo M 
CollectedDigits M2 
MinimumNumberOfDigits 
Default = 1 
INPN_MinimumNumberOfDigits 74 0x4a D3 
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x4b M3 
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3 
CancelDigit INPN_CancelDigit 77 0x4d O3 
StartDigit INPN_StartDigit 78 0x4e O3 
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3 
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3 
Errortreatment 
Default = StfErrorAndInfo  
INPN_Errortreatment 81 0x51 D3 
InterruptableAndInd 
Default = True 
INPN_InterruptableAnnInd 82 0x52 D3 
VoiceInformation 
Default = False 
INPN_VoiceInformation 83 0x53 D3 
VoiceBack 
Default = False 
INPN_VoiceBack 84 0x54 D3 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
O InformationToSend 
See InformationToSend (Sub-table) on page 96 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.21 SpecializedResourceReport 
INOP_ SpecializedResourceReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
LinkedID INPN_LinkedID 2 0x2 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
147 
B.9.22 Cancel 
INOP_Cancel 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O 
If the parameter INPN_Cancel_InvokeID is not set then the operation will be 
sent with the null parameter ‘All Requests’ indicating all operations on that 
dialogue should be cancelled. 
B.9.23 ActivityTest 
 INOP_ ActivityTest 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.9.24 ContinueWithArg 
INOP_ ContinueWithArgument 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
O ServiceInteractionIndicatorsTwo 
See ServiceInteractionIndicatorsTwo (sub-table) on page 134 
O2 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
GenericNumbers (SEQUENCE, size = 1 to 5) O 
GenericNumber INPN_GenericNumber(n) 67 to 
71 0x43 to 0x47 O2 
CUG_Interlock INPN_CUG_Interlock 645 0x285 O 
CUG_OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
ChargeNumber INPN_ChargeNumber 642 0x282 O 
Carrier INPN_Carrier 40 0x28 O 
SuppressionOfAnnouncement INPN_SuppressionOfAnnouncement 109 0x6d O 
NAOliInfo INPN_NAOliInfo 141 0x8d O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
148 
B.9.25 InitialDPSMS 
INOP_InitialDPSMS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Servicekey INPN_ServiceKey 3 0x3 O 
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
EventTypeSMS INPN_EventTypeSMS(0) 861 0x35d O 
IMSI INPN_IMSI 130 0x82 O 
O LocationInformationMSC 
See LocationInformation (sub-table) on page 135 
O2 
O LocationInformationGPRS 
See LocationInformationGPRS (sub-table) below 
O2 
SMSCAddress INPN_SMSCAddress 768 0x300 O 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O 
TPShortMessage SubmissionInfo INPN_TPShtMsgSubInfo 781 0x30d O 
TPProtocolIdentifier INPN_TPProtocolID 780 0x30c O 
TPDataCodingScheme INPN_TPDataCodingScheme 779 0x30b O 
TPValidityPeriod INPN_TPValidityPeriod 782 0x30e O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
SMSReferenceNumber INPN_SMSReferenceNumber 770 0x302 O 
MSCAddress INPN_MSCAddress 132 0x84 O 
SGSN Number INPN_SGSNNumber 767 0x2ff O 
LocationInformationGPRS (sub-table) 
LocationInformationGPRS 
Value Parameter Mnemonic 
dec hex 
 
CellGlobalIdOrService AreaIdOrLAI INPN_CGlobal_Sarea_LAI 641 0x281 O 
RoutingAreaIdentity INPN_GPRSRoutingAreaID 897 0x381 O 
GeographicalInformation INPN_GPRSGeographical Information 895 0x37f O 
SGSN Number INPN_LocationInfoGPRS_SGSNNumber 4231 0x1087 O 
SelectedLSAIdentity INPN_LocationInfoGPRS_SelLSAIdentity 4281 0x10b9 O 
ExtensionContainer INPN_GPRSExtensionContainer 896 0x380 O 
Ellipsis INPN_LocationInfoGPRS_Ellipsis 1369 0x559 A 
SAI-Present INPN_LocationInfoGPRS_SAIPresent 4232 0x1088 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
149 
B.9.26 FurnishChargingInformationSMS 
INOP_FurnishChargingInformationSMS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
FCIBCCCAMELsequence1 M 
FreeFormatData INPN_FreeFormData 319 0x13f M2 
AppendFreeFormatData  
Default = overwrite (0) 
INPN_AppendFreeFormData 637 0x27d D2 
B.9.27 Connect SMS 
INOP_ConnectSMS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CallingPartysNumber INPN_CallingPartyNumber 6 0x6 O 
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O 
SMSCAddress INPN_SMSCAddress 768 0x300 O 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.28 RequestReportSMSEvent 
INOP_RequestReportSMSEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
SMSEvents (SEQUENCE, size = 1 to 10) M 
EventTypeSMS INPN_EventTypeSMS(n) 861 to 870 0x35d to 0x366 M2 
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
150 
B.9.29 EventReportSMS 
INOP_EventReportSMS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeSMS INPN_EventType(0) 861  M 
EventSpecificInformationSMS O 
O-SMSFailureSpecificInfo C2 
FailureCause INPN_FailureCause 94 0x5e M3 
Ellipsis INPN_EventSpecInfoSMS _Ellipsis 1371 0x55b A3 
O-SMSSubmitSpecificInfo C2 
  --No Info--  
Ellipsis INPN_EventSpecInfoSMS _Ellipsis 1371 0x55b A3 
MiscCallInfo O 
MessageType INPN_MessageType 56 0x38 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.30 ContinueSMS 
INOP_ContinueSMS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.9.31 ReleaseSMS 
INOP_ReleaseSMS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RPCause INPN_RPCause 762 0x2fa M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
151 
B.9.32 ResetTimerSMS 
INOP_ResetTimerSMS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimerID INPN_TimerID 61 0x3d M 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.33 ActivityTestGPRS 
INOP_ActivityTestGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.9.34 ApplyChargingGPRS 
INOP_ApplyChargingGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ChargingCharacteristics M 
MaxTransferredVolume INPN_MaxTransferredVol 659 0x293 C2 
MaxElapsedTime INPN_MaxElapsedTime 658 0x292 C2 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.35 ApplyChargingReportGPRS 
INOP_ApplyChargingReportGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ChargingResult M 
TransferredVolume C2 
VolumeIfNoTariffSwitch INPN_VolIfNoTariffSwch 785 0x311 C3 
VolumeIfTariffSwitch C3 
5 Non-Primitive Interface 
152 
INOP_ApplyChargingReportGPRS 
Value Parameter Mnemonic 
dec hex 
 
VolumeSinceLastTariff Switch INPN_VolLastTariffSwch 783 0x30f M4 
VolumeTariffSwitch Interval INPN_VolTariffSwchInt 784 0x310 O4 
ElapsedTime C2 
TimeGPRSIfNoTariff Switch INPN_TmGPRSIfNoTariffSwch 776 0x308 C3 
TimeGPRSIfTariffSwitch C3 
TimeGPRSSinceLast TariffSwitch INPN_TmGPRSSinceLast TariffSwch 774 0x306 M4 
TimeGPRSTariffSwitch Interval INPN_TmGPRSTariffSwchInt 775 0x307 O4 
O QualityOfService 
See CAMEL v.3 QualityOfService (sub-table) on page 153 
O2 
Active 
Default = True 
INPN_Active 636 0x27c D 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
ChargingRollOver O 
TransferredVolumeRollOver C2 
Ro-VolumeIfNoTariff Switch RO-VoIIfNoTariffSwch 761 0x2f9 C3 
Ro-VolumeIfTariffSwitch C3 
Ro-VolumeSinceLast TariffSwitch RO-VolLastTariffSwch 759 0x2f7 M4 
Ro-VolumeTariffSwitch Interval RO-VolTariffSwchInt 760 0x2f8 O4 
ElapsedTimeRollOver C2 
Ro-TimeGPRSIfNoTariff Switch RO-TmGPRSNoTariff Swch 756 0x2e C3 
Ro-TimeGPRSIfTariffSwitch C3 
Ro-TimeGPRSSinceLast TariffSwitch RO-TmGPRSLastTariffSwch 757 0x2f5 M4 
Ro-TimeGPRSTariff SwitchInterval RO-TmGPRSTariffSwchInt 758 0x2f6 O4 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
153 
CAMEL v.3 QualityOfService (sub-table) 
QualityOfService 
Value Parameter Mnemonic 
dec hex 
 
Requested-QoS O 
Short-QoS-Format INPN_ReqShtQoSFormat 751 0x2ef C2 
Long-QoS-Format INPN_ReqLngQoSFormat 752 0x2f0 C2 
Subscribed-QoS O 
Short-QoS-Format INPN_SubShtQoSFormat 771 0x303 C2 
Long-QoS-Format INPN_SubLngQoSFormat 772 0x304 C2 
Negotiated-QoS    O 
Short-QoS-Format INPN_NegShtQoSFormat 746 0x2ea C2 
Long-QoS-Format INPN_NegLngQoSFormat 747 0x2eb C2 
B.9.36 CancelGPRS 
INOP_CancelGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.37 ConnectGPRS 
INOP_ConnectGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AccessPointName INPN_AccessPtName 592 0x250 M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
154 
B.9.38 ContinueGPRS 
INOP_ContinueGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.39 EntityReleasedGPRS 
INOP_EntityReleasedGPRS 
Value Parameter Mnemonic 
dec hex 
 
 
InvokeID INPN_InvokeID 1 0x1 M 
GPRSCause INPN_GPRSCause 654 0x28e M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.40 FurnishChargingInformationGPRS 
INOP_FurnishChargingInformationGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
FCIBCCCAMELsequence1 M 
FreeFormatData INPN_FreeFormData 319 0x13f M2 
PDPID INPN_PDPID 665 0x299 O2 
AppendFreeFormatData  
Default = overwrite (0) 
INPN_AppendFreeFormData 637 0x27d D2 
Ellipsis INPN_FCIGPRSseq_Ellipsis 1367 0x557  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
155 
B.9.41 InitialDPGPRS 
INOP_InitialDPGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Servicekey INPN_Servicekey 3 0x3 M 
GPRSEventType INPN_GPRSEventType(0) 877 0x36d M 
MSISDN INPN_MSISDN 660 0x294 M 
IMSI INPN_IMSI 130 0x82 M 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf M 
GPRSMSClass O 
MSNetworkCapability INPN_MSNetworkCapability 661 0x295 M2 
MSRadioAccess Capability INPN_MSRadioAccess Capability 662 0x296 O2 
EndUserAddress O 
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M2 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M2 
PDPAddress INPN_PDPAddress 666 0x29a O2 
O QualityOfService 
See CAMEL v.3 QualityOfService (sub-table) on page 153 O2 
AccessPointName INPN_AccessPtName 592 0x250 O 
RoutingAreaIdentity INPN_RoutingAreaID 754 0x2f2 O 
ChargingID INPN_ChargingID 643 0x283 O 
SGSNCapabilities INPN_SGSNCapabilities 766 0x2fe O 
O LocationInformationGPRS 
See LocationInformationGPRS (sub-table) on page 148 O2 
PDPInitiationType INPN_PDPInitiationType 667 0x29b O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
GGSNAddress INPN_GGSNAddress 652 0x28c O 
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O 
B.9.42 ReleaseGPRS 
INOP_ReleaseGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
GPRSCause INPN_GPRSCause 654 0x28e M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
156 
B.9.43 EventReportGPRS 
INOP_EventReportGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
GPRSEventType INPN_GPRSEventType(0) 877 0x36d M 
MiscCallInfo O 
MessageType INPN_MessageType 56 0x38 O2 
GPRSEventSpecificInformation O 
AttachChangeOfPositionSpecificInformation C2 
O3 LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O4 
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3 
PDP-ContextChangeOfPositionSpecificInformation C2 
AccessPointName INPN_AccessPtName 592 0x250 O3 
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3 
O3 LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O4 
EndUserAddress O3 
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4 
PDPAddress INPN_PDPAddress 666 0x29a O4 
O3 QualityOfService (see CAMEL v.3 QualityOfService (sub-table) on page 153) 
O4 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3 
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3 
GGSNAddress INPN_GGSNAddress 652 0x28c O3 
DetachSpecificInformation C2 
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3 
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3 
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3 
DisconnectSpecificInformation C2 
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3 
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3 
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3 
PDPContextEstablishmentSpecificInformation C2 
AccessPointName INPN_AccessPtName 592 0x250 O3 
EndUserAddress O3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
157 
INOP_EventReportGPRS 
Value Parameter Mnemonic 
dec hex 
 
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4 
PDPAddress INPN_PDPAddress 666 0x29a O4 
O3 QualityOfService (see CAMEL v.3 QualityOfService (sub-table) on page 153) 
O4 
O3 LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O4 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3 
PDPInitiationType INPN_PDPInitiationType 667 0x29b O3 
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3 
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O3 
PDPContextEstablishmentAcknowledgementSpecificInformation C2 
AccessPointName INPN_AccessPtName 592 0x250 O3 
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3 
EndUserAddress O3 
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4 
PDPAddress INPN_PDPAddress 666 0x29a O4 
O3 QualityOfService (see CAMEL v.3 QualityOfService (sub-table) on page 153) 
O4 
O3 LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O4 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3 
Ellipsis INPN_EventSpecInfoGPRS _Ellipsis 1372 0x55c A3 
GGSNAddress INPN_GGSNAddress 652 0x28c O3 
PDPID INPN_PDPID 655 0x28f O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
158 
B.9.44 RequestReportGPRSEvent 
INOP_RequestReportGPRSEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
GPRSEvent (SEQUENCE, size = 1 to 10) M 
GPRSEventType INPN_GPRSEventType(n) 877 to 886 0x36d to 0x376 M2 
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.45 ResetTimerGPRS 
INOP_ResetTimerGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimerID 
Default = tssf (0) 
INPN_TimerID 61 0x3d D 
TimerValue INPN_TimerValue 62 0x3e M 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.9.46 SendChargingInformationGPRS 
INOP_SendChargingInformationGPRS 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CAMEL-SCIGPRSBillingChargingCharacteristics M 
AOCGPRS M2 
AOCInitial M3 
E1 INPN_Initial_CAI_E1 144 0x90 O4 
E2 INPN_Initial_CAI_E2 145 0x91 O4 
E3 INPN_Initial_CAI_E3 146 0x92 O4 
E4 INPN_Initial_CAI_E4 147 0x93 O4 
E5 INPN_Initial_CAI_E5 148 0x94 O4 
E6 INPN_Initial_CAI_E6 149 0x95 O4 
E7 INPN_Initial_CAI_E7 150 0x96 O4 
AOCSubsequent O3 
CAI-GSM0224 M4 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
159 
INOP_SendChargingInformationGPRS 
Value Parameter Mnemonic 
dec hex 
 
E1 INPN_Subsequent_CAI_E1 151 0x97 O5 
E2 INPN_Subsequent_CAI_E2 152 0x98 O5 
E3 INPN_Subsequent_CAI_E3 153 0x99 O5 
E4 INPN_Subsequent_CAI_E4 154 0x9a O5 
E5 INPN_Subsequent_CAI_E5 155 0x9b O5 
E6 INPN_Subsequent_CAI_E6 156 0x9c O5 
E7 INPN_Subsequent_CAI_E7 157 0x9d O5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4 
PDPID INPN_PDPID 665 0x299 O2 
Ellipsis INPN_Ellipsis 112 0x70 A2 
5 Non-Primitive Interface 
160 
B.10 CAMEL v4 Operation Definitions 
B.10.1 InitialDP 
INOP_InitialDP 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
ServiceKey INPN_ServiceKey 3 0x03 M 
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O 
cGEncountered INPN_cGEncountered 10 0x0a O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0x0b O 
LocationNumber INPN_LocationNumber 13 0x0d O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0x0f O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O 
BearerCapability O 
BearerCapability INPN_BearerCapability 23 0x17 C2 
Ellipsis INPN_BearerCap_Ellipsis 119 0x77 C2 
EventTypeBCSM INPN_EventTypeBCSM 24 0x18 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Cause INPN_Cause 41 0x29 O 
O ServiceInteractionIndicatorsTwo  
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) 
O2 
Carrier INPN_Carrier 40 0x28 O 
CUG-Index INPN_CUG_Index 644 0x284 O 
CUG-Interlock INPN_CUG_Interlock 645 0x285 O 
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
IMSI INPN_IMSI 130 0x81 O 
SubscriberState O 
AssumedIdle INPN_AssumedIdle 134 0x86 C2 
CamelBusy INPN_CamelBusy 135 0x87 C2 
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2 
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
161 
INOP_InitialDP 
Value Parameter Mnemonic 
(dec) (hex) 
 
O LocationInformation (see LocationInformation (sub-table) on page 135) 
O2 
Ext_BasicServicesCode O 
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2 
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2 
CallReferenceNumber INPN_CallReferenceNumber 131 0x82 O 
MSCAddress INPN_MSCAddress 132 0x83 O 
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x80 O 
TimeAndTimezone INPN_TimeAndTimezone 132 0x84 O 
CallForwardingSS Pending INPN_GSM_ForwardingPending 133 0x85 O 
IDPArgExtension O 
GMSC Address INPN_GMSCAddress 653 0x28d O2 
ForwardingDestNumber INPN_ForwardingDestNumber 2776 0xad8 O2 
MSClassMark2 INPN_MSClassMark2 2777 0xad9 O2 
IMEI INPN_IMEI 2778 0xada O2 
SupportedCamelPhases INPN_SupportedCamelPhases 2779 0xadb O2 
OfferedCamel4Functionalities INPN_OfferedCamel4Functionalities 2780 0xadc O2 
BearerCapability2 O2 
BearerCapability2 INPN_BearerCapability2 2771 0xad3 O3 
Ext_BasicServiceCode2 O2 
Ext_BearerServiceCode2 INPN_Ext_BearerServiceCode2 2764 0xacc C3 
Ext_TeleserviceCode2 INPN_Ext_TeleserviceCode2 2765 0xacd C3 
HighLayerCompatibility2 INPN_HighLayerCompatibility2 2781 0xadd O2 
LowLayerCompatibility INPN_LowLayerCompatibility 2782 0xade O2 
LowLayerCompatibility2 INPN_LowLayerCompatibility2 2783 0xadf O2 
Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 A2 
EnhancedDialledServicesAllowed INPN_EnhancedDialledServicesAllowed 2784 0xae0 O2 
UU_Data O2 
UUIndicator INPN_UUIndicator 2773 0xad5 O3 
UUI INPN_UUI 2774 0xad6 O3 
uusCFInteraction INPN_uusCFInteraction 2775 0xad7 O3 
UU_ExtensionContainer INPN_UU_ExtensionContainer 4230 0x1086 O3 
Ellipsis INPN_UU_Ellipsis 4216 0x1078 A3 
CollectInformationAllowed INPN_collectInformationAllowed 2785 0xae1 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
162 
B.10.2 AssistRequestInstructions  
INOP_AssistRequestInstructions 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CorrelationID INPN_CorrelationID 31 0x1f M 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0x0b M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.3 EstablishTemporaryConnection 
INOP_EstablishTemporaryConnection 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
AssistingSSPIPRouting 
Address INPN_AssistingSSPIPRouting Address 102 0x66 M 
CorrelationID INPN_CorrelationID 31 0x1f O 
ScfID INPN_ScfID 38 0x26 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Carrier INPN_Carrier 40 0x28 O 
O ServiceInteractionIndicatorsTwo  
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) 
O2 
CallSegmentId INPN_CallSegmentID 320 0x140 O 
NAOliInfo INPN_NAOliInfo 141 0x8d O 
ChargeNumber INPN_ChargeNumber 642 0x282 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0x0f O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O 
B.10.4 DisconnectForwardConnection 
INOP_DisconnectForwardConnection 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
163 
B.10.5 DFCWithArgument 
INOP_DFC_with_Argument 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.6 ConnectToResource 
INOP_ConnectToResource 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
ResourceAddress M 
IPRoutingAddress INPN_IPRoutingAddress 31 0x1f C2 
None INPN_None 650 0x28a C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
O ServiceInteractionIndicatorsTwo  
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) 
O2 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.7 Connect 
INOP_Connect 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
DestinationRouting Address INPN_DestinationRouting 
Address(0) 27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0x0f O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Carrier INPN_Carrier 40 0x28 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
GenericNumbers (SET, size = 1 to 5) O 
5 Non-Primitive Interface 
164 
INOP_Connect 
Value Parameter Mnemonic 
(dec) (hex) 
 
GenericNumber INPN_GenericNumber(n) 67 to 
71 0x43 to 0x47 O2 
O ServiceInteractionIndicatorsTwo  
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) 
O2 
ChargeNumber INPN_ChargeNumber 642 0x282 O 
LegID    O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
CUG-Interlock INPN_CUG_Interlock 645 0x285 O 
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
Suppression of 
Announcement INPN_SuppressionOfAnnouncement 109 0x6d O 
OCSIApplicable INPN_OCSIApplicable 110 0x6e O 
NaOliInfo INPN_NAOliInfo 141 0x8d O 
BorInterrogationRequested INPN_BorInterrogationRequested 2787 0xae3 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
SuppressNCSI INPN_SuppressNCSI 2788 0xae4 O 
B.10.8 ReleaseCall 
INOP_ReleaseCall 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
Cause INPN_Cause 41 0x29 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
165 
B.10.9 RequestReportBCSMEvent 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
BCSMEvents (SEQUENCE, size = 1 to 16)19 M 
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to 
207 0xc0 to 0xcf M2 
MonitorMode INPN_MonitorMode(n) 208 to 
223 0xd0 to 0xdf M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224 to 
239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 
255 0xf0 to 0xff C3 
DPSpecificCriteria O2 
ApplicationTimer INPN_ApplicationTimer(n) 176 to 
191 0xb0 to 0xbf C3 
MidCallControlInfo C3 
MinimumNumberOfDigitsSeq INPN_MinimumNumberOfDigitsSeq(n) 2789 to 
2804 0x to 0x O4 
MaximumNumberOfDigitsSeq INPN_MaximumNumberOfDigitsSeq(n) 2805 to 
2820 0x to 0x O4 
EndOfReplyDigitSeq INPN_EndOfReplyDigitSeq(n) 2821 to 
2836 0x to 0x O4 
CancelDigitSeq INPN_CancelDigitSeq(n) 2837 to 
2852 0x to 0x O4 
StartDigitSeq INPN_StartDigitSeq(n) 2853 to 
2868 0x to 0x O4 
InterDigitTimeout INPN_MC_InterDigitTimeout(n) 4265 to 
4280 0x to 0x O4 
Ellipsis INPN_MidCallCtlInfoEllipsis(n) 4249 to 
4264 0x to 0x A4 
DpSpecificCriteriaAlt C3 
ChangeOfPositionControlInfo (SEQUENCE, size = 1 to 10)220 O4 
ChangeOfLocation[0] O5 
CellGlobalId INPN_CellGlobalId0(n) 2885 to 
2900 0xb45 to 0xb54 O6 
                                                 
19 
 The BCSMEvent structure can be repeated up to 16 times for each operation. Replace ‘n’ with the position in the 
sequence of BCSMEvents starting from 0. The CAP v4 specification indicates that the structure may be repeated up to 30 
times. This has not been implemented due to implementation reasons. 
20 
 The ChangeOfLocation structure can be repeated up to 10 times – for each instance of BCSMEvent. This nesting has 
required that the instances of the ChangeOfLocation parameters are given unique names; for example, 
INPN_ServiceAreaId9(15) for the ServiceAreaId parameter in the 10th instance of ChangeOfLocation within the 16th BCSM 
Event. 
5 Non-Primitive Interface 
166 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
(dec) (hex) 
 
ServiceAreaId INPN_ServiceAreaId0(n) 2901 to 
2916 0xb55 to 0xb64 O6 
LocationAreaId INPN_LocationAreaId0(n) 2917 to 
2932 0xb65 to 0xb74 O6 
InterSystemHandOver INPN_InterSystemHandOver0(n) 2933 to 
2948 0xb75 to 0xb84 O6 
InterPLMNHandOver INPN_InterPLMNHandOver0(n) 2949 to 
2964 0xb85 to 0xb94 O6 
InterMSCHandOver INPN_InterMSCHandOver0(n) 2965 to 
2980 0xb95 to 0xba4 O6 
ChangeOfLocationAlt0 O6 
Ellipsis INPN_ChangeOfLocationEllipsis0(n) 2981 to 
2996 0xba5 to 0xbb4 A7 
ChangeOfLocation[1] O5 
CellGlobalId INPN_CellGlobalId1(n) 2997 to 
3012 0xbb5 to 0xbc4 O6 
ServiceAreaId INPN_ServiceAreaId1(n) 3013 to 
3028 0xbc5 to 0xbd4 O6 
LocationAreaId INPN_LocationAreaId1(n) 3029 to 
3044 0xbd5 to 0xbe4 O6 
InterSystemHandOver INPN_InterSystemHandOver1(n) 3045 to 
3060 0xbe5 to 0xbf4 O6 
InterPLMNHandOver INPN_InterPLMNHandOver1(n) 3061 to 
3076 0xbf5 to 0xc04 O6 
InterMSCHandOver INPN_InterMSCHandOver1(n) 3077 to 
3092 0xc05 to 0xc14 O6 
ChangeOfLocationAlt1 O6 
Ellipsis INPN_ChangeOfLocationEllipsis1(n) 3093 to 
3108 0xc15 to 0xc24 A7 
ChangeOfLocation[2] O5 
CellGlobalId INPN_CellGlobalId2(n) 3109 to 
3124 0xc25 to 0xc34 O6 
ServiceAreaId INPN_ServiceAreaId2(n) 3125 to 
3140 0xc35 to 0xc44 O6 
LocationAreaId INPN_LocationAreaId2(n) 3141 to 
3156 0xc45 to 0xc54 O6 
InterSystemHandOver INPN_InterSystemHandOver2(n) 3157 to 
3172 0xc55 to 0xc64 O6 
InterPLMNHandOver INPN_InterPLMNHandOver2(n) 3173 to 
3188 0xc65 to 0xc74 O6 
InterMSCHandOver INPN_InterMSCHandOver2(n) 3189 to 
3204 0xc75 to 0xc84 O6 
ChangeOfLocationAlt2 O6 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
167 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
(dec) (hex) 
 
Ellipsis INPN_ChangeOfLocationEllipsis2(n) 3205 to 
3220 0xc85 to 0xc94 A7 
ChangeOfLocation[3] O5 
CellGlobalId INPN_CellGlobalId3(n) 3221 to 
3236 0xc95 to 0xca4 O6 
ServiceAreaId INPN_ServiceAreaId3(n) 3237 to 
3252 0xca5 to 0xcb4 O6 
LocationAreaId INPN_LocationAreaId3(n) 3253 to 
3268 0xcb5 to 0xcc4 O6 
InterSystemHandOver INPN_InterSystemHandOver3(n) 3269 to 
3284 0xcc5 to 0xcd4 O6 
InterPLMNHandOver INPN_InterPLMNHandOver3(n) 3285 to 
3300 0xcd5 to 0xce4 O6 
InterMSCHandOver INPN_InterMSCHandOver3(n) 3301 to 
3316 0xce5 to 0xcf4 O6 
ChangeOfLocationAlt3 O6 
Ellipsis INPN_ChangeOfLocationEllipsis3(n) 3317 to 
3332 0xcf5 to 0xd04 A7 
ChangeOfLocation[4] O5 
CellGlobalId INPN_CellGlobalId4(n) 3333 to 
3348 0xd05 to 0xd14 O6 
ServiceAreaId INPN_ServiceAreaId4(n) 3349 to 
3364 0xd15 to 0xd24 O6 
LocationAreaId INPN_LocationAreaId4(n) 3365 to 
3380 0xd25 to 0xd34 O6 
InterSystemHandOver INPN_InterSystemHandOver4(n 3381 to 
3396 0xd35 to 0xd44 O6 
InterPLMNHandOver INPN_InterPLMNHandOver4(n) 3397 to 
3412 0xd45 to 0xd54 O6 
InterMSCHandOver INPN_InterMSCHandOver4(n) 3413 to 
3428 0xd55 to 0xd64 O6 
ChangeOfLocationAlt4 O6 
Ellipsis INPN_ChangeOfLocationEllipsis4(n) 3429 to 
3444 0xd65 to 0xd74 A7 
ChangeOfLocation[5] O5 
CellGlobalId INPN_CellGlobalId5(n) 3445 to 
3460 0xd75 to 0xd84 O6 
ServiceAreaId INPN_ServiceAreaId5(n) 3461 to 
3476 0xd85 to 0xd94 O6 
LocationAreaId INPN_LocationAreaId5(n) 3477 to 
3492 0xd95 to 0xda4 O6 
InterSystemHandOver INPN_InterSystemHandOver5(n) 3493 to 
3508 0xda5 to 0xdb4 O6 
5 Non-Primitive Interface 
168 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
(dec) (hex) 
 
InterPLMNHandOver INPN_InterPLMNHandOver5(n) 3509 to 
3524 0xdb5 to 0xdc4 O6 
InterMSCHandOver INPN_InterMSCHandOver5(n) 3525 to 
3540 0xdc5 to 0xdd4 O6 
ChangeOfLocationAlt5 O6 
Ellipsis INPN_ChangeOfLocationEllipsis5(n) 3541 to 
3556 0xdd5 to 0xde4 A7 
ChangeOfLocation[6] O5 
CellGlobalId INPN_CellGlobalId6(n) 3557 to 
3572 0xde5 to 0xdf4 O6 
ServiceAreaId INPN_ServiceAreaId6(n) 3573 to 
3588 0xdf5 to 0xe04 O6 
LocationAreaId INPN_LocationAreaId6(n) 3589 to 
3604 0xe05 to 0xe14 O6 
InterSystemHandOver INPN_InterSystemHandOver6(n) 3605 to 
3620 0xe15 to 0xe24 O6 
InterPLMNHandOver INPN_InterPLMNHandOver6(n) 3621 to 
3636 0xe25 to 0xe34 O6 
InterMSCHandOver INPN_InterMSCHandOver6(n) 3637 to 
3652 0xe35 to 0xe44 O6 
ChangeOfLocationAlt6 O6 
Ellipsis INPN_ChangeOfLocationEllipsis6(n) 3653 to 
3668 0xe45 to 0xe54 A7 
ChangeOfLocation[7] O5 
CellGlobalId INPN_CellGlobalId7(n) 3669 to 
3684 0xe55 to 0xe64 O6 
ServiceAreaId INPN_ServiceAreaId7(n) 3685 to 
3700 0xe65 to 0xe74 O6 
LocationAreaId INPN_LocationAreaId7(n) 3701 to 
3716 0xe75 to 0xe84 O6 
InterSystemHandOver INPN_InterSystemHandOver7(n) 3717 to 
3732 0xe85 to 0xe94 O6 
InterPLMNHandOver INPN_InterPLMNHandOver7(n) 3733 to 
3748 0xe95 to 0xea4 O6 
InterMSCHandOver INPN_InterMSCHandOver7(n) 3749 to 
3764 0xea5 to 0xeb4 O6 
ChangeOfLocationAlt7 O6 
Ellipsis INPN_ChangeOfLocationEllipsis7(n) 3765 to 
3780 0xeb5 to 0xec4 A7 
ChangeOfLocation[8] O5 
CellGlobalId INPN_CellGlobalId8(n) 3781 to 
3796 0xec5 to 0xed4 O6 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
169 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
(dec) (hex) 
 
ServiceAreaId INPN_ServiceAreaId8(n) 3797 to 
3812 0xed5 to 0xee4 O6 
LocationAreaId INPN_LocationAreaId8(n) 3813 to 
3828 0xee5 to 0xef4 O6 
InterSystemHandOver INPN_InterSystemHandOver8(n) 3829 to 
3844 0xef5 to 0xf04 O6 
InterPLMNHandOver INPN_InterPLMNHandOver8(n) 3845 to 
3860 0xf05 to 0xf14 O6 
InterMSCHandOver INPN_InterMSCHandOver8(n) 3861 to 
3876 0xf15 to 0xf24 O6 
ChangeOfLocationAlt8 O6 
Ellipsis INPN_ChangeOfLocationEllipsis8(n) 3877 to 
3892 0xf25 to 0xf34 A7 
ChangeOfLocation[9] O5 
CellGlobalId INPN_CellGlobalId9(n) 3893 to 
3908 0xf35 to 0xf44 O6 
ServiceAreaId INPN_ServiceAreaId9(n) 3909 to 
3924 0xf45 to 0xf54 O6 
LocationAreaId INPN_LocationAreaId9(n) 3925 to 
3940 0xf55 to 0xf64 O6 
InterSystemHandOver INPN_InterSystemHandOver9(n) 3941 to 
3956 0xf65 to 0xf74 O6 
InterPLMNHandOver INPN_InterPLMNHandOver9(n) 3957 to 
3972 0xf75 to 0xf84 O6 
InterMSCHandOver INPN_InterMSCHandOver9(n) 3973 to 
3988 0xf85 to 0xf94 O6 
ChangeOfLocationAlt9 O6 
Ellipsis INPN_ChangeOfLocationEllipsis9(n) 3989 to 
4004 0xf95 to 0xfa4 A7 
NumberOfDigits INPN_NumberOfDigits(n) 160 to 
175 0xa0 to 0xaf O4 
InterDigitTimeout INPN_InterDigitTimeout(n) 2869 to 
2884 0xb35 to 0xb44 O4 
INPN_DpSpecCritAltEllipsis(n) A4 Ellipsis 
INPN_AutomaticRearm(n) 4005 to 
4020 0xfa5 to 0xfb4 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
170 
B.10.10 EventReportBCSM 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
EventTypeBCSM INPN_EventTypeBCSM(0).   
See BCSM Event Codes on page 174 
192 0xc0 M 
EventSpecificInformationBCSM O 
RouteSelectFailure21 C2 
FailureCause INPN_FailureCause 94 0x5e O3 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OcalledPartyBusy C2 
BusyCause INPN_BusyCause 95 0x5f O3 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OnoAnswer C2 
  --No Info--  
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Oanswer C2 
DestinationAddress INPN_DestinationAddr 648 0x288 O3 
Or-Call INPN_OrCall 664 0x298 O3 
ForwardedCall INPN_ForwardedCall 651 0x28b O3 
ChargeIndicator INPN_ChargeIndicator 4182 0x1056 O3 
Ext_BasicServiceCode O3 
Ext_BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C4 
Ext_TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C4 
Ext_BasicServiceCode2 O3 
Ext_BearerServiceCode INPN_Ext_BearerServiceCode2 2764 0xacc C4 
Ext_TeleserviceCode INPN_Ext_TeleserviceCode2 2765 0xacd C4 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Omidcall C2 
MidCallEvents O3 
DTMFDigitsCompleted INPN_DTMFDigitsCompleted 4183 0x1057 C4 
DTMFDigitsTimeOut INPN_DTMFDigitsTimeOut 4184 0x1058 C4 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Odisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
                                                 
21 
 The event specific information formatted or recovered is dependent on the value of INPN_EventTypeBCSM(0). For 
example, if its value is Tdisconnect, then the format procedures will use the parameter INPN_ReleaseCause. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
171 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
(dec) (hex) 
 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TcalledPartyBusy C2 
BusyCause INPN_BusyCause 95 0x5f O3 
CallForwarded INPN_CallForwarded 639 0x27f O3 
RouteNotPermitted INPN_RouteNotPermitted 753 0x2f1 O3 
ForwardingDestinationNumber INPN_forwardingDestinationNumber 4185 0x1059 O3 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TnoAnswer C2 
CallForwarded INPN_CallForwarded 639 0x27f O3 
ForwardingDestinationNumber INPN_forwardingDestinationNumber 4185 0x1059 O3 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tanswer C2 
DestinationAddress INPN_DestinationAddr 648 0x288 O3 
Or-Call INPN_OrCall 664 0x298 O3 
ForwardedCall INPN_ForwardedCall 651 0x28b O3 
ChargeIndicator INPN_ChargeIndicator 4182 0x1056 O3 
Ext_BasicServiceCode O3 
Ext_BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C4 
Ext_TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C4 
Ext_BasicServiceCode2 O3 
Ext_BearerServiceCode INPN_Ext_BearerServiceCode2 2764 0xacc C4 
Ext_TeleserviceCode INPN_Ext_TeleserviceCode2 2765 0xacd C4 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tmidcall C2 
MidCallEvents O3 
DTMFDigitsCompleted INPN_DTMFDigitsCompleted 4183 0x1057 C4 
DTMFDigitsTimeOut INPN_DTMFDigitsTimeOut 4184 0x1058 C4 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tdisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OtermSeized C2 
O3LocationInformation (see LocationInformation (sub-table) on page 135) 
O4 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
5 Non-Primitive Interface 
172 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
(dec) (hex) 
 
CallAccepted C2 
O3LocationInformation (see LocationInformation (sub-table) on page 135) 
O4 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Oabandon C2 
RouteNotPermitted INPN_RouteNotPermitted 753 0x2f1 O3 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OchangeOfPosition C2 
LocationInformation (see LocationInformation (sub-table) on page 135) O3 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
MetDPCriteriaList (SEQUENCE, size = 1 to 10)22 O3 
EnteringCellGlobalId INPN_EnteringCellGlobalId(n) 4053 to 
4062 0xfd5 to 0xfde C4 
LeavingCellGlobalId INPN_LeavingCellGlobalId(n) 4063 to 
4072 0xfdf to 0xfe8 C4 
EnteringServiceAreaId INPN_EnteringServiceAreaId(n) 4073 to 
4082 0xfe9 to 0xff2 C4 
LeavingServiceAreaId INPN_LeavingServiceAreaId(n) 4083 to 
4092  0xff3 to 0xffc C4 
EnteringLocationAreaId INPN_EnteringLocationAreaId(n) 4093 to 
4102  0xffd to 0x1006 C4 
LeavingLocationAreaId INPN_LeavingLocationAreaId(n) 4103 to 
4112  0x1007 to 0x1010 C4 
InterSystemHandOverToUMTSINPN_InterSystemHandOverToUMTS(n) 4113 to 
4122 0x1011 to 0x101a C4 
InterSystemHandOverToGSM INPN_InterSystemHandOverToGSM(n) 4123 to 
4132 0x101b to 0x1024 C4 
InterPLMNHandOver INPN_InterPLMNHandOver(n) 4133 to 
4142 0x1025 to 0x102e C4 
InterMSCHandOver INPN_InterMSCHandOver(n) 4143 to 
4152 0x102f to 0x1038 C4 
MetDPCriterionAlt C4 
Ellipsis INPN_MetDPCriterion_Ellipsis(n) 4153 to 
4162 0x1039 to 0x1042 A5 
TchangeOfPosition C2 
O3LocationInformation (see LocationInformation (sub-table) on page 135) 
O4 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
                                                 
22 
 For MetDPCriteriaList, each of the up to 10 instances may use any of the parameters listed after it. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
173 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
(dec) (hex) 
 
MetDPCriteriaList – defined as above O3 
DpSpecificInfoAlt  (default match) C2 
Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
oServiceChangeSpecificInfo O3 
Ext_BasicServiceCode O4 
Ext_BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C5 
Ext_TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C5 
Ellipsis INPN_oServiceChargeInfo_Ellipsis 4222 0x107e A4 
InitiatorOfServiceCharge INPN_oInitiatorOfServiceCharge 4224 0x1080 O4 
NatureOfServiceCharge INPN_oNatureOfServiceCharge 4226 0x1082 O4 
tServiceChangeSpecificInfo O3 
Ext_BasicServiceCode O4 
Ext_BearerServiceCode INPN_Ext_BearerServiceCode_tServChng 4180 0x1054 C5 
Ext_TeleserviceCode INPN_Ext_TeleserviceCode_tServChng 4181 0x1055 C5 
Ellipsis INPN_tServiceChargeInfo_Ellipsis 4223 0x107f A4 
InitiatorOfServiceCharge INPN_tInitiatorOfServiceCharge 4225 0x1081 O4 
NatureOfServiceCharge INPN_tNatureOfServiceCharge 4227 0x1083 O4 
collectedInfoSpecificInfo O3 
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 O4 
Ellipsis INPN_CollectedInfo_Ellipsis 4221 0x107d A4 
LegID O 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2 
MiscCallInfo O 
MessageType INPN_MessageType 56 0x38 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
174 
BCSM Event Codes 
BCSM Event Codes are shown in the following table. 
Event Name Code 
INEV_origAttemptAuthorized 1 
INEV_collectedInfo 2 
INEV_analyzedInformation 3 
INEV_routeSelectFailure 4 
INEV_oCalledPartyBusy 5 
INEV_oNoAnswer 6 
INEV_oAnswer 7 
INEV_oMidCall 8 
INEV_oDisconnect 9 
INEV_oAbandon 10 
INEV_termAttemptAuthorized 12 
INEV_tCalledPartyBusy 13 
INEV_tNoAnswer 14 
INEV_tAnswer 15 
INEV_tMidCall 16 
INEV_tDisconnect 17 
INEV_tAbandon 18 
INEV_oTermSeized 19 
INEV_oSuspended 20 
INEV_tSuspended 21 
INEV_origAttempt 22 
INEV_oReAnswer 24 
INEV_tReAnswer 25 
INEV_facilityAcceptedAndAvailable 26 
INEV_callAccepted 27 
INEV_oChangeOfPosition 50 
INEV_tChangeOfPosition 51 
INEV_oServiceChange 52 
INEV_tServiceChange 53 
B.10.11 CollectInformation 
INOP_CollectInformation 
Value  Parameter Mnemonic 
(dec) (hex)  
InvokeID INPN_InvokeID 1 0x01 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
175 
B.10.12 Continue  
INOP_Continue 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
B.10.13 InitiateCallAttempt 
INOP_InitiateCallAttempt 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
DestinationRoutingAddress INPN_DestinationRoutingAddress(0) 27 0x1b M 
Extensions (see Appendix B.14 Operation Extensions on page 257) O 
LegToBeCreated O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
NewCallSegment INPN_NewCallSegment(0) 1036 0x40c O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x06 O 
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O 
GsmSCFAddress INPN_GsmSCFAddress 4186 0x105a O 
Suppress-T-CSI INPN_SuppressTCSI 4187 0x105b O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.14 ResetTimer  
INOP_ResetTimer 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
TimerID 
Default = tssf (0) 
INPN_TimerID 61 0x3d D 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
176 
B.10.15 FurnishChargingInformation 
INOP_FurnishChargingInformation 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeId INPN_InvokeId 1 0x01 M 
FCIBCCCAMELsequence1 M 
FreeFormatData INPN_FreeFormData 319 0x13f M2 
PartyToCharge O2 
SendingSideID INPN_SendingSideID(0) 224 0xe0 O3 
AppendFreeFormatData 
Default = overwrite(0) 
INPN_AppendFreeFormData 637 0x27d D2 
B.10.16 ApplyCharging 
INOP_ApplyCharging 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
AChBillingChargingCharacteristics M 
TimeDurationCharging M2 
MaxCallPeriodDuration INPN_MaxCallPeriodDuration 159 0x9f M3 
ReleaseIfDuration Exceeded  
Default = FALSE 
INPN_ReleaseIfDurExceeded 750 0x2ee D3 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O3 
AudibleIndicator O3 
Tone  INPN_AudibleIndicTone 4214 0x1076 C4 
BurstListO3 C4 
WarningPeriod 
Default = 30 
INPN_warningPeriod 4213 0x1075 D5 
Burst O5 
NumberOfBursts 
Default = 1 
INPN_numberOfBursts 4193 0x1061 D6 
BurstInterval 
Default = 2 
INPN_burstInterval 4194 0x1062 D6 
NumberOfTonesInBurst 
Default = 3 
INPN_numberOfTonesInBurst 4195 0x1063 D6 
ToneDuration  
Default = 2 
INPN_toneDuration 4196 0x1064 D6 
ToneInterval 
Default = 2 
INPN_toneInterval 4197 0x1065 D6 
Ellipsis INPN_BurstEllipsis 4211 0x1073 A6 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
177 
INOP_ApplyCharging 
Value Parameter Mnemonic 
(dec) (hex) 
 
Ellipsis INPN_BurstListEllipsis 4212 0x1074 A5 
Extensions2  (see Appendix B.14 Operation Extensions on page 257)  O3 
Ellipsis INPN_TmDurChar_Ellipsis 1374 0x55e A3 
PartyToCharge O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
AChChargingAddress O 
LegID C2 
SendingSideID INPN_SendingSideID(1) 225 0xe1 C3 
ReceivingSideID INPN_ReceivingSideID(1) 241 0xf1 C3 
SrfConnection INPN_SrfConnection 2786 0xae2 C2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.17 ApplyChargingReport 
INOP_ApplyChargingReport 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CallResult M 
TimeDurationChargingResult M2 
PartyToCharge M3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 M4 
TimeInformation M3 
TimeIfNoTariffSwitch INPN_TmIfNoTariffSwch 776 0x308 C4 
TimeIfTariffSwitch C4 
TimeSinceTariffSwitch INPN_TmSinceTariffSwch 777 0x309 M5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O5 
LegActive 
Default = TRUE 
INPN_LegActive 4215 0x1077 D3 
CallLegReleasedAtTcpExpiry INPN_CallReleasedAtTcpExp 640 0x280 O3 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O3 
AChChargingAddress O3 
LegID C4 
SendingSideID INPN_SendingSideID(1) 225 0xe1 C5 
ReceivingSideID INPN_ReceivingSideID(1) 241 0xf1 C5 
5 Non-Primitive Interface 
178 
INOP_ApplyChargingReport 
Value Parameter Mnemonic 
(dec) (hex) 
 
SrfConnection INPN_SrfConnection 2786 0xae2 C4 
Ellipsis INPN_TmDurCharRes_Ellipsis 112 0x70 A3 
B.10.18 CallGap 
INOP_CallGap 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
GapCriteria M 
BasicGapCriteria C2 
CalledAddressAndService C3 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M4 
ServiceKey INPN_ServiceKey 3 0x03 M4 
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 A4 
CallingAddressAndService C3 
CallingAddressValue INPN_CallingAddressValue 99 0x63 M4 
ServiceKey INPN_ServiceKey 3 0x03 M4 
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 A4 
GapOnService C3 
ServiceKey INPN_ServiceKey 3 0x03 M4 
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 A4 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C3 
CompoundGapCriteria C2 
CompoundBasicGapCriteria M3 
CompoundCalledAddressAndService C4 
CalledAddressValue INPN_ComCalledAddressValue 894 0x37e M5 
ServiceKey INPN_ComServiceKey 893 0x37d M5 
Ellipsis INPN_CldAddrServ_Ellipsis 1398 0x576 A5 
CompoundCallingAddressAndService C4 
CallingAddressValue INPN_CallingAddressValue 99 0x63 M5 
ServiceKey INPN_ComServiceKey 893 0x37d M5 
Ellipsis INPN_ClgAddrServ_Ellipsis 1400 0x578 A5 
CompoundGapOnService C4 
ServiceKey INPN_ComServiceKey 893 0x37d M5 
Ellipsis INPN_GapOnServ_Ellipsis 1401 0x579 A5 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
179 
INOP_CallGap 
Value Parameter Mnemonic 
(dec) (hex) 
 
CalledAddressValue INPN_ComCalledAddressValue 894 0x37e C4 
ScfID INPN_ScfID 38 0x26 O3 
GapIndicators M 
GapDuration INPN_Gap_Duration 72 0x48 M2 
GapInterval INPN_GapInterval 73 0x49 M2 
Ellipsis INPN_GapInd_Ellipsis 1411 0x583 A2 
ControlType INPN_ControlType 101 0x65 O 
GapTreatment O 
C2 InformationToSend (see InformationToSend (Sub-table) on page 96) 
O3 
ReleaseCause INPN_ReleaseCause 96 0x60 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.19 CallInformationReport  
INOP_CallInformationReport 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
RequestedInformationList (SEQUENCE, size = 1 to 4)  M 
RequestedInformationType INPN_RequestedInformationType(n) 288 to 
291 0x120 to 0x123 M2 
RequestedInformationValue M2 
CallAttemptEllapsedTimeValue  INPN_CallAttemptEllapsedTimeValue(n) 293 to 
296 0x125 to 0x128 C3 
CallStopTimeValue INPN_CallStopTimeValue(n) 298 to 
301 0x12a to 0x12d C3 
CallConnectedElapsedTimeValueINPN_CallConnectedElapsedTimeValue(n) 303 to 
306 0x12f to 0x132 C3 
ReleaseCauseValue INPN_ReleaseCauseValue(n) 313 to 
316 0x139 to 0x13c C3 
Ellipsis INPN_ReqInfo_Ellipsis(n) 1376 to 
1379 0x560 to 0x563 A2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
5 Non-Primitive Interface 
180 
INOP_CallInformationReport 
Value Parameter Mnemonic 
(dec) (hex) 
 
LegID O 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.20 CallInformationRequest 
INOP_CallInformationReport 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
RequestedInformationReport (SEQUENCE, size = 1 to 4)  M 
RequestedInformation 
Type INPN_RequestedInformationType(n) 288 to 291 0x120 to 0x123 M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
LegID    O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.21 SendChargingInformation  
INOP_SendChargingInformation 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CAMEL-SCIBillingChargingCharacteristics M 
AOCBeforeAnswer23 C2 
AOCInitial M3 
E1 INPN_Initial_CAI_E1 144 0x90 O4 
E2 INPN_Initial_CAI_E2 145 0x91 O4 
E3 INPN_Initial_CAI_E3 146 0x92 O4 
E4 INPN_Initial_CAI_E4 147 0x93 O4 
E5 INPN_Initial_CAI_E5 148 0x94 O4 
E6 INPN_Initial_CAI_E6 149 0x95 O4 
E7 INPN_Initial_CAI_E7 150 0x96 O4 
                                                 
23 
 The parameters INPN_CAMEL_AOC_BeforeAnswer and INPN_CAMEL_AOC_AfterAnswer are used to determine if the AOC 
is for before or after answer. If present, AOCBeforeAnswer or AOCAfterAnswer will be sent, otherwise the AOC-Extension 
will be sent. The parameters are not formatted or decoded and may be of any value. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
181 
INOP_SendChargingInformation 
Value Parameter Mnemonic 
(dec) (hex) 
 
AOCSubsequent O3 
CAI-GSM0224 M4 
E1 INPN_Subsequent_CAI_E1 151 0x97 O5 
E2 INPN_Subsequent_CAI_E2 152 0x98 O5 
E3 INPN_Subsequent_CAI_E3 153 0x99 O5 
E4 INPN_Subsequent_CAI_E4 154 0x9a O5 
E5 INPN_Subsequent_CAI_E5 155 0x9b O5 
E6 INPN_Subsequent_CAI_E6 156 0x9c O5 
E7 INPN_Subsequent_CAI_E7 157 0x9d O5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4 
AOCAfterAnswer24 C2 
AOCSubsequent O3 
CAI-GSM0224 M4 
E1 INPN_Subsequent_CAI_E1 151 0x97 O5 
E2 INPN_Subsequent_CAI_E2 152 0x98 O5 
E3 INPN_Subsequent_CAI_E3 153 0x99 O5 
E4 INPN_Subsequent_CAI_E4 154 0x9a O5 
E5 INPN_Subsequent_CAI_E5 155 0x9b O5 
E6 INPN_Subsequent_CAI_E6 156 0x9c O5 
E7 INPN_Subsequent_CAI_E7 157 0x9d O5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4 
AOC-Extension (CAMEL-SCIBillingChargingCharacteristicsAlt)24 C2 
Ellipsis INPN_SCIBCCAlt_Ellipsis 4218 0x107a A3 
PartyToCharge M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
                                                 
24 
 The parameters INPN_CAMEL_AOC_BeforeAnswer and INPN_CAMEL_AOC_AfterAnswer are used to determine if the AOC 
is for before or after answer. If present, AOCBeforeAnswer or AOCAfterAnswer will be sent, otherwise the AOC-Extension 
will be sent. The parameters are not formatted or decoded and may be of any value. 
5 Non-Primitive Interface 
182 
B.10.22 PlayAnnouncement 
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
M InformationToSend (see InformationToSend (Sub-table) on page 96) 
M2 
DisconnectFromIP Forbidden 
Default = TRUE 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
RequestAnnouncement 
CompleteNotification 
Default = TRUE 
INPN_RequestAnnouncement 
Complete 60 0x3c D 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
RequestAnnouncementStartedNotification 
Default - FALSE 
INPN_RequestAnnouncementStarted 4189 0x105d D 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.23 PromptAndCollectUserInformation 
INOP_ PromptAndCollectUserInformation 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CollectedInfo M 
CollectedDigits M2 
MinimumNbOfDigits 
Default = 1 
INPN_MinimumNumberOfDigits 74 0x4a D3 
MaximumNbOf Digits INPN_MaximumNumberOfDigits 75 0x4b M3 
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3 
CancelDigit INPN_CancelDigit 77 0x4d O3 
StartDigit INPN_StartDigit 78 0x4e O3 
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3 
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3 
ErrorTreatment 
Default: = StfErrorAndInfo 
INPN_Errortreatment 81 0x51 D3 
InterruptableAndInd 
Default = TRUE 
INPN_InterruptableAnnInd 82 0x52 D3 
VoiceInformation 
Default = FALSE 
INPN_VoiceInformation 83 0x53 D3
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
183 
INOP_ PromptAndCollectUserInformation 
Value Parameter Mnemonic 
(dec) (hex) 
 
VoiceBack 
Default = FALSE 
INPN_VoiceBack 84 0x54 D3 
DisconnectFromIP Forbidden 
Default = TRUE 
INPN_DisconnectFromIPForbidden 59 0x3b D 
O InformationToSend (see InformationToSend (Sub-table) on page 96) 
O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
RequestAnnouncementStartedNotification 
Default - FALSE 
INPN_RequestAnnouncementStarted 4189 0x105dD 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.24 SpecializedResourceReport 
INOP_ SpecializedResourceReport 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
LinkedID INPN_LinkedID 2 0x02 O 
AllAnnouncementsComplete INPN_AllAnnouncementsComplete 4190 0x105e C 
FirstAnnouncementStarted INPN_FirstAnnouncementStarted 4191 0x105f C 
B.10.25 Cancel 
INOP_Cancel 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 C 
AllRequests INPN_CancelAllRequests 4219 0x107b C 
CallSegmentToCancel C 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O2 
CallSegmentID INPN_CallSegmentID 320 0x140 O2 
Ellipsis INPN_CallSegToCancelEllipsis 4210 0x1072 A2 
5 Non-Primitive Interface 
184 
B.10.26 ActivityTest  
INOP_ ActivityTest 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
B.10.27 ContinueWithArg 
INOP_ ContinueWithArgument 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
O ServiceInteractionIndicatorsTwo  
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) 
O2 
CallingPartysCategory INPN_CallingPartysCategory 8 0x08 O 
GenericNumbers (SET, size = 1 to 5) O 
GenericNumber INPN_GenericNumber(n) 67  to  
71 0x43  to  0x47 O2 
CUG_Interlock INPN_CUG_Interlock 645 0x285 O 
CUG_OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
ChargeNumber INPN_ChargeNumber 642 0x282 O 
Carrier INPN_Carrier 40 0x28 O 
SuppressionOfAnnouncement INPN_SuppressionOfAnnouncement 109 0x6d O 
NAOliInfo INPN_NAOliInfo 141 0x8d O 
BorInterrogationRequested INPN_BorInterrogationRequested 2787 0xae3 O 
Suppress-O-CSI INPN_SuppressOCSI 4200 0x1068 O 
ContinueWithArgumentArgExtension O 
Suppress-D-CSI INPN_SuppressDCSI 4198 0x1066 O2 
Suppress-N-CSI INPN_SuppressNCSI 2788 0xae4 O2 
SuppressOutgoingCallBarringINPN_SuppressOutgoingCallBarring 4199 0x1067 O2 
LegOrCallSegment O2 
CallSegmentID INPN_CallSegmentID 320 0x140 C3 
LegId C3 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C4 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C4 
Ellipsis INPN_ContinueWithArgumentExtensionEllipsis4209 0x1071 A2 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
185 
B.10.28 DisconnectLeg 
INOP_DisconnectLeg 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
LegToBeReleased M 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.29 MoveLeg 
INOP_MoveLeg 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
LegIDToMove M 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.30 SplitLeg 
INOP_SplitLeg 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
LegToBeSplit M 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
NewCallSegment INPN_NewCallSegment(0) 1036 0x40c O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
186 
B.10.31 EntityReleased 
INOP_EntityReleased 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CallSegmentFailure C 
CallSegmentID INPN_CallSegmentID 320 0x140 O2 
Cause INPN_Cause 41 0x29 O2 
Ellipsis INPN_CallSegmentFailure_Ellipsis 4192 0x1060 A2 
BCSMFailure C 
LegId O2 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3 
Cause INPN_BCSMCause 4208 0x1070 O2 
Ellipsis INPN_BCSMFailure_Ellipsis 946 0x3b2 A2 
B.10.32 PlayTone 
INOP_PlayTone 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
LegOrCallSegment M 
CallSegmentID INPN_CallSegmentID 320 0x140 C2 
LegId C2 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3 
Burst M 
NumberOfBursts 
Default = 1 
INPN_numberOfBursts 4193 0x1061 D2 
BurstInterval 
Default = 2 
INPN_burstInterval 4194 0x1062 D2 
NumberOfTonesInBurst 
Default = 3 
INPN_numberOfTonesInBurst 4195 0x1063 D2 
ToneDuration 
Default = 2 
INPN_toneDuration 4196 0x1064 D2 
ToneInterval 
Default = 2 
INPN_toneInterval 4197 0x1065 D2 
Ellipsis INPN_BurstEllipsis 4211 0x1073 A2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
187 
INOP_PlayTone 
Value Parameter Mnemonic 
(dec) (hex) 
 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.33 InitialDPSMS 
INOP_InitialDPSMS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
Servicekey INPN_ServiceKey 3 0x03 O 
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O 
CallingPartyNumber INPN_CallingPartyNumberSMS 4188 0x105c O 
EventTypeSMS INPN_EventTypeSMS(0) 861 0x35d O 
IMSI INPN_IMSI 130 0x82 O 
O LocationInformation (see LocationInformation (sub-table) on page 135) 
O2 
O LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O2 
SMSCAddress INPN_SMSCAddress 768 0x300 O 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O 
TPShortMessage SpecificInfo INPN_TPShtMsgSubInfo 781 0x30d O 
TPProtocolIdentifier INPN_TPProtocolID 780 0x30c O 
TPDataCodingScheme INPN_TPDataCodingScheme 779 0x30b O 
TPValidityPeriod INPN_TPValidityPeriod 782 0x30e O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
SMSReferenceNumber INPN_SMSReferenceNumber 770 0x302 O 
MSCAddress INPN_MSCAddress 132 0x84 O 
SGSN Number INPN_SGSNNumber 767 0x2ff O 
MS-ClassMark2 INPN_MSClassMark2 2777 0xad9 O 
GPRSMSClass    O 
MSNetworkCapability INPN_MSNetworkCapability 661 0x295 O2 
MSRadioAccessCapability INPN_MSRadioAccessCapability 662 0x296 O2 
IMEI INPN_IMEI 2778 0xada O 
CalledPartyNumber INPN_CalledPartyNumber 5 0x05 O 
5 Non-Primitive Interface 
188 
B.10.34 FurnishChargingInformationSMS 
INOP_FurnishChargingInformationSMS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
FCIBCCCAMELsequence1 M 
FreeFormatData INPN_FreeFormData 319 0x13f M2 
AppendFreeFormatData  
Default = overwrite (0) 
INPN_AppendFreeFormData 637 0x27d D2 
B.10.35 Connect SMS 
INOP_ConnectSMS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CallingPartysNumber INPN_CallingPartyNumberSMS 4188 0x105c O 
DestinationSubscriber Number INPN_DestSubscriberNumber 649 0x289 O 
SMSCAddress INPN_SMSCAddress 768 0x300 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.36 RequestReportSMSEvent 
INOP_RequestReportSMSEvent 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
SMSEvents (SEQUENCE, size = 1 to 10) M 
EventTypeSMS INPN_EventTypeSMS(n) 861 to 870 0x35d to 0x366 M2 
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
189 
B.10.37 EventReportSMS 
INOP_EventReportSMS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
EventTypeSMS INPN_EventTypeSMS(0)  
See SMS Event Codes below 
861 0x35d M 
EventSpecificInformationSMS O 
O-SMSFailureSpecificInfo25 C2 
FailureCause INPN_SMSCause 769 0x301 M3 
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3 
O-SMSSubmittedSpecificInfo C2 
  --No Info--  
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3 
T-SMSFailureSpecificInfo C2 
FailureCause INPN_MT_SMSCause 2772 0xad4 M3 
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3 
T-SMSDeliverySpecificInfo C2 
  --No Info--  
Ellipsis INPN_EventSpecInfoSMS_Ellipsis 1371 0x55b A3 
MiscCallInfo O 
MessageType 
Default = request 
INPN_MessageType 56 0x38 D2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
SMS Event Codes 
The SMS Event Codes are listed in the following table. 
Event Name Event Code 
INEVS_SMSCollectedInfo 1 
INEVS_oSMSFailure 2 
INEVS_oSMSSubmitted 3 
INEVS_SMSDeliveryRequested 11 
INEVS_tSMSFailure 12 
INEVS_tSMSDelivery 13 
                                                 
25 
 The event-specific information formatted or recovered is dependent on the value of INPN_EventTypeSMS(0). 
5 Non-Primitive Interface 
190 
B.10.38 ContinueSMS 
INOP_ContinueSMS 
Value  Parameter Mnemonic 
(dec) (hex)  
InvokeID INPN_InvokeID 1 0x01 M 
B.10.39 ReleaseSMS 
INOP_ReleaseSMS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
RPCause INPN_RPCause 762 0x2fa M 
B.10.40 ResetTimerSMS 
INOP_ResetTimerSMS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
TimerID 
Default = tssf (0) 
INPN_TimerID 61 0x3d D 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.41 ActivityTestGPRS 
INOP_ActivityTestGPRS 
Value  Parameter Mnemonic 
(dec) (hex)  
InvokeID INPN_InvokeID 1 0x01 M 
B.10.42 ApplyChargingGPRS 
INOP_ApplyChargingGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
ChargingCharacteristics M 
MaxTransferredVolume INPN_MaxTransferredVol 659 0x293 C2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
191 
INOP_ApplyChargingGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
MaxElapsedTime INPN_MaxElapsedTime 658 0x292 C2 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.43 ApplyChargingReportGPRS 
INOP_ApplyChargingReportGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
ChargingResult M 
TransferredVolume C2 
VolumeIfNoTariffSwitch INPN_VolIfNoTariffSwch 785 0x311 C3 
VolumeIfTariffSwitch C3 
VolumeSinceLastTariff Switch INPN_VolLastTariffSwch 783 0x30f M4 
VolumeTariffSwitch Interval INPN_VolTariffSwchInt 784 0x310 O4 
ElapsedTime C2 
TimeGPRSIfNoTariff Switch INPN_TmGPRSIfNoTariffSwch 776 0x308 C3 
TimeGPRSIfTariffSwitch    C3 
TimeGPRSSinceLast 
TariffSwitch INPN_TmGPRSSinceLast¶TariffSwch 774 0x306 M4 
TimeGPRSTariffSwitch Interval INPN_TmGPRSTariffSwchInt 775 0x307 O4 
O QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 192) 
O2 
Active  
Default = TRUE 
INPN_Active 636 0x27c D 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
ChargingRollOver O 
TransferredVolumeRollOver C2 
Ro-VolumeIfNoTariff Switch INPN_RO_VolIfNoTariffSwch 761 0x2f9 C3 
Ro-VolumeIfTariffSwitch C3 
Ro-VolumeSinceLast 
TariffSwitch INPN_RO_VolLastTariffSwch 759 0x2f7 M4 
Ro-VolumeTariffSwitch Interval INPN_RO_VolTariffSwchInt 760 0x2f8 O4 
ElapsedTimeRollOver C2 
5 Non-Primitive Interface 
192 
INOP_ApplyChargingReportGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
Ro-TimeGPRSIfNoTariff Switch INPN_RO_TmGPRSNoTariffSwch 756 0x2f4 C3 
Ro-TimeGPRSIfTariffSwitch C3 
Ro-TimeGPRSSinceLast 
TariffSwitch INPN_RO_TmGPRSLastTariffSwch 757 0x2f5 O4 
Ro-TimeGPRSTariff 
SwitchInterval INPN_RO_TmGPRSTariffSwchInt 758 0x2f6 O4 
CAMEL v4 QualityOfService (sub-table) 
QualityOfService 
Value Parameter Mnemonic 
(dec) (hex) 
 
Requested-QoS O 
Short-QoS-Format INPN_ReqShtQoSFormat 751 0x2ef C2 
Long-QoS-Format INPN_ReqLngQoSFormat 752 0x2f0 C2 
Subscribed-QoS O 
Short-QoS-Format INPN_SubShtQoSFormat 771 0x303 C2 
Long-QoS-Format INPN_SubLngQoSFormat 772 0x304 C2 
Negotiated-QoS O 
Short-QoS-Format INPN_NegShtQoSFormat 746 0x2ea C2 
Long-QoS-Format INPN_NegLngQoSFormat 747 0x2eb C2 
Ellipsis INPN_QoS_Ellipsis 1370 0x55a A 
Requested-QoS-Extension O 
SupplementToLongQoSFormat INPN_ReqSupToLongQoSFormat 4202 0x106a O2 
Ellipsis INPN_ReqGPRSQoSExt_Ellipsis 4203 0x106b A2 
Subscribed-QoS-Extension O 
SupplementToLongQoSFormat INPN_SubSupToLongQoSFormat 4204 0x106c O2 
Ellipsis INPN_SubGPRSQoSExt_Ellipsis 4205 0x106d A2 
Negotiated-QoS-Extension O 
SupplementToLongQoSFormat INPN_NegSupToLongQoSFormat 4206 0x106e O2 
Ellipsis INPN_NegGPRSQoSExt_Ellipsis 4207 0x106f A2 
B.10.44 CancelGPRS 
INOP_CancelGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
193 
INOP_CancelGPRS 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.45 ConnectGPRS 
INOP_ConnectGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
AccessPointName INPN_AccessPtName 592 0x250 M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.46 ContinueGPRS 
INOP_ContinueGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.47 EntityReleasedGPRS 
INOP_EntityReleasedGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
GPRSCause INPN_GPRSCause 654 0x28e M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
194 
B.10.48 FurnishChargingInformationGPRS 
INOP_FurnishChargingInformationGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
FCIBCCCAMELsequence1 M 
FreeFormatData INPN_FreeFormData 319 0x13f M2 
PDPID INPN_PDPID 665 0x299 O2 
AppendFreeFormatData  
Default = overwrite (0) 
INPN_AppendFreeFormData 637 0x27d D2 
Ellipsis INPN_FCIGPRSseq_Ellipsis 1367 0x557 A2 
B.10.49 InitialDPGPRS 
INOP_InitialDPGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
Servicekey INPN_Servicekey 3 0x03 M 
GPRSEventType INPN_GPRSEventType(0) 877 0x36d M 
MSISDN INPN_MSISDN 660 0x294 M 
IMSI INPN_IMSI 130 0x82 M 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf M 
GPRSMSClass O 
MSNetworkCapability INPN_MSNetworkCapability 661 0x295 M2 
MSRadioAccess Capability INPN_MSRadioAccess¶Capability 662 0x296 O2 
EndUserAddress O 
PDPTypeOrganization INPN_PDPTypeOrganization 749 0x2ed M2 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M2 
PDPAddress INPN_PDPAddress 666 0x29a O2 
O QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 192) 
O2 
AccessPointName INPN_AccessPtName 592 0x250 O 
RoutingAreaIdentity INPN_RoutingAreaID 754 0x2f2 O 
ChargingID INPN_ChargingID 643 0x283 O 
SGSNCapabilities INPN_SGSNCapabilities 766 0x2fe O 
O LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O2 
PDPInitiationType INPN_PDPInitiationType 667 0x29b O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
195 
INOP_InitialDPGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
GGSNAddress INPN_GGSNAddress 652 0x28c O 
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O 
IMEI INPN_IMEI 2778 0xada O 
B.10.50 ReleaseGPRS 
INOP_ReleaseGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
GPRSCause INPN_GPRSCause 654 0x28e M 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.51 EventReportGPRS 
INOP_EventReportGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
GPRSEventType INPN_GPRSEventType(0)  
See GPRS Event Codes on page 197 
877 0x36d M 
MiscCallInfo O 
MessageType 
Default = request(0) 
INPN_MessageType 56 0x38 D2 
GPRSEventSpecificInformation O 
AttachChangeOfPositionSpecificInformation26 C2 
O3 LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O4 
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3 
PDP-ContextChangeOfPositionSpecificInformation C2 
AccessPointName INPN_AccessPtName 592 0x250 O3 
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3 
LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) O3 
                                                 
26 
 The event specific information formatted or recovered is dependent on the value of INPN_GPRSEventType(0). 
5 Non-Primitive Interface 
196 
INOP_EventReportGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
O4 
EndUserAddress O3 
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4 
PDPAddress INPN_PDPAddress 666 0x29a O4 
O3 QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 192) 
O4 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3 
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3 
GGSNAddress INPN_GGSNAddress 652 0x28c O3 
DetachSpecificInformation C2 
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3 
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3 
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3 
DisconnectSpecificInformation C2 
InitiatingEntity INPN_InitiatingEntity 942 0x3ae O3 
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3 
RoutingAreaUpdate INPN_RoutingAreaUpdate 755 0x2f3 O3 
PDPContextEstablishmentSpecificInformation C2 
AccessPointName INPN_AccessPtName 592 0x250 O3 
EndUserAddress O3 
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4 
PDPAddress INPN_PDPAddress 666 0x29a O4 
O3 QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 192) 
O4 
O3 LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O4 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3 
PDPInitiationType INPN_PDPInitiationType 667 0x29b O3 
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3 
SecondaryPDP-Context INPN_SecondaryPDPContext 764 0x2fc O3 
PDPContextEstablishmentAcknowledgementSpecificInformation C2 
AccessPointName INPN_AccessPtName 592 0x250 O3 
GPRSChargingID INPN_GPRSChargingID 655 0x28f O3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
197 
INOP_EventReportGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
EndUserAddress O3 
PDPTypeOrganisation INPN_PDPTypeOrganisation 749 0x2ed M4 
PDPTypeNumber INPN_PDPTypeNumber 748 0x2ec M4 
PDPAddress INPN_PDPAddress 666 0x29a O4 
O3 QualityOfService (see CAMEL v4 QualityOfService (sub-table) on page 192) 
O4 
O3 LocationInformationGPRS (see LocationInformationGPRS (sub-table) on page 148) 
O4 
TimeAndTimeZone INPN_TimeAndTimezone 703 0x2bf O3 
Ellipsis INPN_EventSpecInfoGPRS_Ellipsis 1372 0x55c A3 
GGSNAddress INPN_GGSNAddress 652 0x28c O3 
PDPID INPN_PDPID 655 0x28f O 
Ellipsis INPN_Ellipsis 112 0x70 A 
GPRS Event Codes 
GPRS Event Codes are listed in the following table. 
GPRS Event Name Code 
INEVG_Attach 1 
INEVG_AttachChangeOfPosition 2 
INEVG_Detached 3 
INEVG_PDPContextEstablishment 11 
INEVG_PDPContextEstablishmentAck 12 
INEVG_Disconnect 13 
INEVG_PDPContextChangeOfPosition 14 
B.10.52 RequestReportGPRSEvent 
INOP_RequestReportGPRSEvent 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
GPRSEvent (SEQUENCE OF, size = 1 to 10) M 
GPRSEventType INPN_GPRSEventType(n) 877  to   886 0x36d to 0x376 M2 
MonitorMode INPN_MonitorMode(n) 208 to 217 0xd0 to 0xd9 M2 
PDPID INPN_PDPID 665 0x299 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
198 
B.10.53 ResetTimerGPRS 
INOP_ResetTimerGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
TimerID 
Default = tssf (0) 
INPN_TimerID 61 0x3d D 
TimerValue INPN_TimerValue 62 0x3e M 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.10.54 SendChargingInformationGPRS 
INOP_SendChargingInformationGPRS 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x01 M 
CAMEL-SCIGPRSBillingChargingCharacteristics M 
AOCGPRS M2 
AOCInitial M3 
E1 INPN_Initial_CAI_E1 144 0x90 O4 
E2 INPN_Initial_CAI_E2 145 0x91 O4 
E3 INPN_Initial_CAI_E3 146 0x92 O4 
E4 INPN_Initial_CAI_E4 147 0x93 O4 
E5 INPN_Initial_CAI_E5 148 0x94 O4 
E6 INPN_Initial_CAI_E6 149 0x95 O4 
E7 INPN_Initial_CAI_E7 150 0x96 O4 
AOCSubsequent O3 
CAI-GSM0224 M4 
E1 INPN_Subsequent_CAI_E1 151 0x97 O5 
E2 INPN_Subsequent_CAI_E2 152 0x98 O5 
E3 INPN_Subsequent_CAI_E3 153 0x99 O5 
E4 INPN_Subsequent_CAI_E4 154 0x9a O5 
E5 INPN_Subsequent_CAI_E5 155 0x9b O5 
E6 INPN_Subsequent_CAI_E6 156 0x9c O5 
E7 INPN_Subsequent_CAI_E7 157 0x9d O5 
TariffSwitchInterval INPN_TariffSwitchInterval 158 0x9e O4 
PDPID INPN_PDPID 665 0x299 O2 
Ellipsis INPN_Ellipsis 112 0x70 A2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
199 
B.11 CAMEL v4 for IMS Operation Definitions 
Specification: CAMEL Application Part (CAP) 3GPP TS 29.278 7.0.0 (2005-12) 
B.11.1 InitialDP 
INOP_InitialDP 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
ServiceKey INPN_ServiceKey 3 0x3 M 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
cGEncountered INPN_cGEncountered 10 0xa O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
LocationNumber INPN_LocationNumber 13 0xd O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O 
BearerCapability  
BearerCapability INPN_BearerCapability 23 0x17 O2 
Ellipsis INPN_BearerCap_Ellipsis 119 0x77 02 
EventTypeBCSM INPN_EventTypeBCSM 24 0x18 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Cause INPN_Cause 41 0x29 O 
ServiceInteractionIndicatorsTwo  
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) 
O 
Carrier INPN_Carrier 40 0x28 O 
CUG-Index INPN_CUG_Index 644 0x284 O 
CUG-Interlock INPN_CUG_Interlock 645 0x285 O 
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
IMSI INPN_IMSI 130 0x81 O 
SubscriberState O 
AssumedIdle INPN_AssumedIdle 134 0x86 C2 
CamelBusy INPN_CamelBusy 135 0x87 C2 
NetDetNotReachable INPN_NetDetNotReachable 136 0x88 C2 
5 Non-Primitive Interface 
200 
INOP_InitialDP 
Value Parameter Mnemonic 
(dec) (hex) 
 
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 C2 
LocationInfo (see LocationInformation (sub-table) on page 135) O 
Ext_BasicSrvCode O 
BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2 
TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2 
CallReferenceNumber INPN_CallReferenceNumber 131 0x82 O 
IMSSFAddress INPN_IMSSFAddress 4335 0x10EF O 
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x80 O 
TimeAndTimezone INPN_TimeAndTimezone 132 0x84 O 
GSM_Forwarding Pending INPN_GSM_ForwardingPending 133 0x85 O 
IDPArgExtension O 
GMSC Address INPN_GMSC_Address 653 0x28d O2 
MediaTypeInfoList INPN_MediaTypeInfo 4359- 
4363 0x1107 to 
0x110B 
O3 
sipCallid INPN_SipCallId 4356 0x1104 O2 
calledPartyURL INPN_CalledPartyURL 4357 0x1105 O2 
callingPartyURL INPN_CallingPartyURL 4358 0x1106 O2 
OriginalCalledPartyURL INPN_OriginalCalledPartyURL 4353 0x1101 O2 
RedirectingPartyURL INPN_RedirectingPartyURL 4352 0x1100 O2 
InitialDPArgExt_Ellipsis INPN_InitialDPArgExt_Ellipsis 117 0x75 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.11.2 ActivityTest 
See CAP v.3.  (Appendix B.9.23 ActivityTest on page 147). 
B.11.3 ApplyCharging 
See CAP v.3.  (Appendix B.9.13 ApplyCharging on page 141). 
B.11.4 ApplyChargingReport 
See CAP v.3.  (Appendix B.9.14 ApplyChargingReport on page 141). 
B.11.5 CallGap 
See CAP v.3.  (Appendix B.9.15 CallGap on page 142). 
B.11.6 CallInformationReport 
See CAP v.3.  (Appendix B.9.16 CallInformationReport on page 143). 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
201 
B.11.7 CallInformationRequest  
See CAP v.3.  (Appendix B.9.17 CallInformationRequest on page 144). 
B.11.8 PlayAnnouncement 
See CAP v.3.  (Appendix B.9.19 PlayAnnouncement on page 145). 
B.11.9 PromptAndCollectUserInformation 
See CAP v.3.  (Appendix B.9.20 PromptAndCollectUserInformation on page 
146). 
B.11.10 SpecializedResourceReport 
See CAP v.3.  (Appendix B.9.21 SpecializedResourceReport on page 146). 
B.11.11 Cancel 
See CAP v.3.  (Appendix B.9.22 Cancel on page 147). 
B.11.12 ContinueWithArg 
See CAP v.3.  (Appendix B.9.24 ContinueWithArg on page 147). 
B.11.13 FurnishChargingInformation 
See CAP v.3.  (Appendix B.9.12 FurnishChargingInformation on page 140). 
B.11.14 Continue 
See CAP v.3.  (Appendix B.9.10 Continue on page 140). 
B.11.15 DisconnectForwardConnection 
See CAP v.3.  (Appendix B.9.4 DisconnectForwardConnection on page 136). 
B.11.16 ConnectToResource  
INOP_ConnectToResource 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.11.17 Connect 
INOP_Connect 
Value Parameter Mnemonic 
(dec) (hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
5 Non-Primitive Interface 
202 
INOP_Connect 
Value Parameter Mnemonic 
(dec) (hex) 
 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Carrier INPN_Carrier 40 0x28 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
GenericNumbers (SEQUENCE, size = 1 to 5) O 
GenericNumber INPN_GenericNumber(n) 67 to 
71 0x43 to 0x47 O2 
ServiceInteractionIndicatorsTwo  
(see ServiceInteractionIndicatorsTwo (sub-table) on page 134) O 
ChargeNumber INPN_ChargeNumber 642 0x282 O 
CUG-Interlock INPN_CUG_Interlock 645 0x285 O 
CUG-OutgoingAccess INPN_CUG_OutgoingAccess 646 0x286 O 
Suppression of Announcement INPN_SuppressionOfAnnouncement 109 0x6d O 
OCSIApplicable INPN_OCSIApplicable 110 0x6e O 
NaOliInfo INPN_NAOliInfo 141 0x8d O 
ConnectArgExtension O 
DestinationRoutingAddressURL INPN_DestinationRoutingAddressURL 4354 0x1102 O2 
OriginalCalledPartyURL INPN_OriginalCalledPartyURL 4353 0x1101 O2 
RedirectingPartyURL INPN_RedirectingPartyURL 4352 0x1100 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.11.18 ReleaseCall 
See CAP v.3.  (Appendix B.9.7 ReleaseCall on page 137). 
B.11.19 ResetTimer  
See CAP v.3.  (Appendix B.9.11ResetTimeron page 140). 
B.11.20 RequestReportBCSMEvent 
See CAP v.3.  (Appendix B.9.8 RequestReportBCSMEvent on page 138). 
B.11.21 EventReportBCSM 
See CAP v.3.  (Appendix B.9.9 EventReportBCSM on page 138). 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
203 
B.12 ETSI CS-2 Operation Definitions 
B.12.1 InitialDP 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ServiceKey INPN_ServiceKey 3 0x3 M 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartyBuisness GroupID INPN_CallingPartyBusiness GroupID 7 0x7 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
CGEncountered INPN_cGEncountered 10 0xa O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
IPAvailable INPN_IPAvailable 12 0xc O 
LocationNumber INPN_LocationNumber 13 0xd O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
TerminalType INPN_TerminalType 17 0x11 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
AdditionalCallingParty Number INPN_AdditionalCallingParty Number 21 0x15 O 
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O 
BearerCapability O 
BearerCap INPN_BearerCapability 23 0x17 C2 
Tmr INPN_Tmr 104 0x68 C2 
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xC0 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x20 O 
Cause INPN_Cause 41 0x29 O 
ISDNAccessRelated Information INPN_ISDNAccessRelated Information 34 0x22 O 
INServiceCompatibilityIndication (1..15) O 
Agreements INPN_Agreements(0) 668 0x29c C2 
NetworkSpecific INPN_NetworkSpecific(0) 684 0x2ac C2 
GenericNumber INPN_GenericNumber(0) 67 0x43 O 
ServiceInteractionIndicatorsTwo O 
ForwardServiceInteractionInd O2 
ConferenceTreatmentIndicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3 
5 Non-Primitive Interface 
204 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
CallDiversionTreatmentIndicator INPN_CallDiversionTreatmentInd 712 0x2c8 O3 
CallOfferingTreatmentIndicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3 
CallingPartyRestricationIndicator INPN_CallingPartyRestricationInd 714 0x2ca O3 
BackwardServiceInteractionInd O2 
ConferenceTreatmentIndicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3 
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3 
BothwayThroughConnectionInd INPN_BothwayThroughConnectionIndicator 111 0x6f O2 
SuspendTimer INPN_SuspendTimer 717 0x2cd O2 
ConnectedNumberTreatment INPN_ConnectedNumberTreatment 718 0x2ce O2 
SupressCallDiversionNotification INPN_SuppressCallDiverNot 719 0x2cf O2 
SupressCallTransferNotification INPN_SuppressCallTransferNot 720 0x2d0 O2 
AllowCdINNoPresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2 
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2 
ForwardGVNS INPN_ForwardGVNS 724 0x2d4 O 
CreatedCallSegmentAssociation INPN_CSAID 725 0x2d5 O 
USIServiceIndicator O 
Global INPN_Global(0) 828 0x33c C2 
Local INPN_Local(0) 844 0x34c C2 
USIInformation INPN_USIInformation 704 0x2c0 O 
Carrier INPN_Carrier 40 0x28 O 
IMSI INPN_IMSI 130 0x82 O 
SubscriberState O 
AssumedIdle INPN_AssumedIdle 134 0x86 M2 
CamelBusy INPN_CamelBusy 135 0x87 M2 
NetworkDetectionNotReachable INPN_NetDetNotReachable 136 0x88 M2 
NotProvidedFromVLR INPN_NotProvidedFromVLR 137 0x89 M2 
LocationInformation O 
AgeOfLocation Information INPN_AgeOfLocation Information 124 0x7c O2 
GeographicalInformation INPN_GeographicalInformation 125 0x7d O2 
Vlr_Number INPN_Vlr_Number 126 0x7e O2 
LI_LocationNumber INPN_LI_LocationNumber 127 0x7f O2 
CellIdOrLAI O 
CellIdFixedLength INPN_CellIdFixedLength 122 0x7a C2 
LAIFixedLength INPN_LAIFixedLength 123 0x7b C2 
ExtensionContainer INPN_ExtensionContainer 128 0x80 O2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
205 
INOP_InitialDP 
Value Parameter Mnemonic 
dec hex 
 
Ext-BasicServiceCode O 
Ext-BearerServiceCode INPN_Ext_BearerServiceCode 120 0x78 C2 
Ext-TeleserviceCode INPN_Ext_TeleserviceCode 121 0x79 C2 
CallReferenceNumber INPN_CallReferenceNumber 131 0x83 O 
MSCAddress INPN_ISDNAddressString 726 0x2d6 O 
CalledPartyBCDNumber INPN_CalledPartyBCDNumber 129 0x81 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.2 AssistRequestInstructions 
INOP_AssistRequestInstructions 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CorrelationID INPN_CorrelationID 31 0x1f M 
IPAvailable INPN_IPAvailable 12 0xc O 
IPSSPCapabilities INPN_IPSSPCapabilities 11 0xb O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.3 EstablishTemporaryConnection 
INOP_EstablishTemporaryConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AssistingSSPIPRouting Address INPN_AssistingSSPIPRouting 
Address 102 0x66 M 
CorrelationID INPN_CorrelationID 31 0x1f O 
LegID C 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
CallSegmentID INPN_CallSegmentID 320 0x140  C2 
ScfID INPN_ScfID 38 0x26 C 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
ServiceInteractionIndicatorsTwo O 
5 Non-Primitive Interface 
206 
INOP_EstablishTemporaryConnection 
Value Parameter Mnemonic 
dec hex 
 
ForwardServiceInteractionInd O2 
ConferenceTreatment Indicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3 
CallDiversionTreatment Indicator INPN_CallDiversionTreatmentInd 712 0x2c8 O3 
CallOfferingTreatment Indicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3 
CallingPartyRestrication Indicator INPN_CallingPartyRestricationInd 714 0x2ca O3 
BackwardServiceInteractionInd 02 
ConferenceTreatment Indicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3 
CallCompletion TreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3 
BothwayThrough ConnectionInd INPN_BothwayThrough 
ConnectionIndicator 111 0x6f O2 
SuspendTimer INPN_SuspendTimer 717 0x2cd O2 
ConnectedNumber Treatment INPN_ConnectedNumberTreatment 718 0x2ce O2 
SupressCallDiversion Notification INPN_SuppressCallDiverNot 719 0x2cf O2 
SupressCallTransfer Notification INPN_SuppressCallTransferNot 720 0x2d0 O2 
AllowCdINNo PresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2 
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.4 DisconnectForwardConnection 
INOP_DisconnectForwardConnection 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.12.5 ConnectToResource  
INOP_ConnectToResource 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
IPAddressAndLegID C 
IPRoutingAddress INPN_IPRoutingAddress 85 0x55 M2 
LegID M2 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3 
IPAddressAndCallSegID C 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
207 
INOP_ConnectToResource 
Value Parameter Mnemonic 
dec hex 
 
IPRoutingAddress INPN_IPRoutingAddress 85 0x1f M2 
CallSegmentID INPN_CallSegmentID 320 0x140 M2 
IPRoutingAddress INPN_IPRoutingAddress 85 0x1f C 
LegID C 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Null n/a C 
CallSegmentID INPN_CallSegmentID 320 0x140 C 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
ServiceInteractionIndicatorsTwo O 
ForwardServiceInteractionInd O2 
ConferenceTreatment Indicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3 
CallDiversionTreatment Indicator INPN_CallDiversionTreatment Ind 712 0x2c8 O3 
CallOfferingTreatment Indicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3 
CallingPartyRestrication Indicator INPN_CallingPartyRestrication Ind 714 0x2ca O3 
BackwardServiceInteractionInd O2 
ConferenceTreatment Indicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3 
CallCompletion TreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3 
BothwayThrough ConnectionInd INPN_BothwayThrough 
ConnectionIndicator 111 0x6f O2 
SuspendTimer INPN_SuspendTimer 717 0x2cd O2 
ConnectedNumber Treatment INPN_ConnectedNumber Treatment 718 0x2ce O2 
SupressCallDiversion Notification INPN_SuppressCallDiverNot 719 0x2cf O2 
SupressCallTransfer Notification INPN_SuppressCallTransferNot 720 0x2d0 O2 
AllowCdINNo PresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2 
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
If no IPRouting address is supplied, a null resource address will be formatted. 
5 Non-Primitive Interface 
208 
B.12.6 Connect 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b O 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
CorrelationID INPN_CorrelationID 31 0x1f O 
CutAndPaste INPN_CutAndPaste 32 0x20 O 
ISDNAccessRelated 
Information INPN_ISDNAccessRelated Information 34 0x22 O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
RouteList  
RouteList INPN_RouteList(0) 35 0x23  
RouteList INPN_RouteList(1) 36 0x24  
RouteList INPN_RouteList(2) 37 0x25  
ScfID INPN_ScfID 38 0x26 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Carrier INPN_Carrier 40 0x28 O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
DisplayInformation INPN_DisplayInformation 91 0x5b O 
ForwardCallIndicators INPN_ForwardCallIndicators 22 0x16 O 
GenericNumber INPN_GenericNumber(0) 67 0x43 O 
ServiceInteractionIndicatorsTwo O 
ForwardServiceInteractionInd O2 
ConferenceTreatment 
Indicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3 
CallDiversionTreatment 
Indicator INPN_CallDiversionTreatment Ind 712 0x2c8 O3 
CallOfferingTreatment 
Indicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3 
CallingPartyRestrication 
Indicator INPN_CallingPartyRestrication Ind 714 0x2ca O3 
BackwardServiceInteractionInd O2 
ConferenceTreatment 
Indicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
209 
INOP_Connect 
Value Parameter Mnemonic 
dec hex 
 
CallCompletion 
TreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3 
BothwayThrough 
ConnectionInd INPN_BothwayThrough ConnectionIndicator 111 0x6f O2 
SuspendTimer INPN_SuspendTimer 717 0x2cd O2 
ConnectedNumber Treatment INPN_ConnectedNumber Treatment 718 0x2ce O2 
SupressCallDiversion 
Notification INPN_SuppressCallDiverNot 719 0x2cf O2 
SupressCallTransfer 
Notification INPN_SuppressCallTransferNot 720 0x2d0 O2 
AllowCdINNo PresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2 
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2 
INServiceCompatibilityIndication (1..15) O 
Agreements INPN_Agreements(0) 668 0x29c C2 
NetworkSpecific INPN_NetworkSpecific(0) 684 0x2aCC2 
ForwardGVNS INPN_ForwardGVNS 724 0x2d4 O 
BackwardGVNS INPN_BackwardGVNS 723 0x2d5 O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
LegID O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
LocationNumber INPN_LocationNumber 13 0xd O 
BearerCapability O 
BearerCap INPN_BearerCapability 23 0x17 C2 
Tmr INPN_Tmr 104 0x68 C2 
SuppressionOfAnnouncement INPN_SuppressionOfAnnouncement 109 0x6d O 
OCSIApplicable INPN_OCSIApplicable 110 0x6e O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
210 
B.12.7 ReleaseCall 
INOP_ReleaseCall 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
InitialCallSegment INPN_InitialCallSegment 745 0x2e9 M 
AssociatedCallSegment M 
CallSegment INPN_CallSegment 744 0x2e8 M2 
ReleaseCause INPN_Cause 41 0x29 O2 
AllCallSegments M 
ReleaseCause INPN_Cause 41 0x29 O2 
B.12.8 RequestReportBCSMEvent 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BCSMEvents (SEQUENCE, n = 0 to 15) M 
EventTypeBCSM INPN_EventTypeBCSM(n) 192 to  
207 0xc0  to 0xcf M2 
MonitorMode INPN_MonitorMode(n) 208 to 
223 0xd0 to 0xdf M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224 to 
239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 
255 0xf0  to  0xff C3 
DPSpecificCriteria O2 
NumberOfDigits INPN_NumberOfDigits(n) 160 to 
175 0xa0 to 0xaf C3 
ApplicationTimer INPN_ApplicationTimer(n) 176 to 
191 0xb0 to 0xbf C3 
MidCallControlInfo C3 
MidCallCtrlSeq0 M4 
MidCallInfoType0 M5 
INServiceControlCode Low0 INPN_INServiceControlCode Low0(n) 1448 to 
1463 0x5a8 to 0x5b7 M6 
INServiceControlCode High0 INPN_INServiceControlCode High0(n) 1464 to 
1479 0x5b8 to 0x5c7 O6 
MidCallReportType0 INPN_MidCallReportType0(n) 1480 to 
1495 0x5c8 to 0x5d7 D5 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
211 
INOP_RequestReportBCSMEvent 
Value Parameter Mnemonic 
dec hex 
 
MidCallCtrlSeq1 O4 
O2 MidCallInfoType1 
O5 
INServiceControlCode Low1 INPN_INServiceControlCode Low1(n) 1528 to 
1543 0x5f8 to 0x607 M6 
INServiceControlCode High1 INPN_INServiceControlCode High1(n) 1544 to 
1559 0x608 to 0x617 O6 
MidCallReportType1 INPN_MidCallReportType1(n) 1560 to 
1575 0x618 to 0x627 D5 
MidCallCtrlSeq2 O4 
MidCallInfoType2 O5 
INServiceControlCode Low2 INPN_INServiceControlCode Low2(n) 1608 to 
1623 0x648 to 0x657 M6 
INServiceControlCode High2 INPN_INServiceControlCode High2(n) 1624 to 
1639 0x658 to 0x667 O6 
MidCallReportType2 INPN_MidCallReportType2(n) 1640 to 
1655 0x668 to 0x677 D5 
MidCallCtrlSeq3 O4 
MidCallInfoType3 O5 
INServiceControlCode Low3 INPN_INServiceControlCode Low3(n) 1688 to 
1703 0x698 to 0x6a7 M6 
INServiceControlCode High3 INPN_INServiceControlCode High3(n) 1704 to 
1719 0x6a8 to 0x6b7 O6 
MidCallReportType3 INPN_MidCallReportType3(n) 1720 to 
1735 0x6b8 to 0x6c7 D5 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
The BCSMEvent structure can be repeated up to sixteen times for each 
operation. Replace ‘n’ with the position in the sequence of BCSMEvents 
starting from 0. The LegID for each event may be specified as either a 
SendingSideID or a ReceivingSideID. For some events, the LegID parameter 
is mandatory; for example, events O-MidCall, O-Disconnect, T-MidCall and T- 
Disconnect in ETSI 300 374-1 must have this parameter present. For other 
events, the legID may take default values. Similarly, the DPSpecificCriteria 
for each event may be specified as either NumberOfDigits or 
ApplicationTimer. 
5 Non-Primitive Interface 
212 
B.12.9 EventReportBCSM 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeBCSM INPN_EventTypeBCSM(0) 192 0xc0 M 
EventSpecificInformationBCSM O 
CollectedInfo C2 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M 
3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
AnalyzedInformation C2 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 M 
3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
RouteSelectFailure C2 
FailureCause INPN_FailureCause 94 0x5e O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OcalledPartyBusy C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OnoAnswer C2 
  --No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Oanswer      C2 
BackwardGVNS INPN_BackwardGVNS 723 0x2d3 O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
OmidCall      C2 
ConnectTime INPN_ConnectTime 103 0X65 O3 
oMidCallInfo  C2 
INServiceControlCode INPN_INServiceControlCode 701 0x2bd O4 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Odisconnect  C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
ConnectTime INPN_ConnectTime 103 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TcalledPartyBusy      C2 
BusyCause INPN_BusyCause 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
213 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
TnoAnswer C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tanswer      C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
TmidCall      C2 
ConnectTime INPN_ConnectTime 103 0x5f O3 
tMidCallInfo      O3 
INServiceControlCode INPN_INServiceControlCode 701 0x2bd O4 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
Tdisconnect C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
ConnectTime INPN_ConnectTime 95 0x5f O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
oTermSeizedSpecificInfo     C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
oSuspended      C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
origAttemptAuthorized C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
oReAnswer C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
facilitySelectedAndAvailable     C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
callAccepted  C2 
--No Info--  
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
oAbandon      C2 
abandonCause INPN_AbandonCause 95 0x5f O3
5 Non-Primitive Interface 
214 
INOP_EventReportBCSM 
Value Parameter Mnemonic 
dec hex 
 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
tAbandon  C2 
abandonCause INPN_AbandonCause 860 0x35c O3 
EventSpecInfo_Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
terminationAttemptAuthorized C2 
--No Info--  
LegID O 
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C2 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C2 
MiscCallInfo O 
MessageType 
Default = request(0) 
INPN_MessageType 56 0x38 D2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
The event specific information formatted or recovered is dependent on the 
value of INPN_EventTypeBCSM(0). For example, if its value is collectedInfo 
(2), then the format procedures will use the parameter 
INPN_CalledPartyNumber. 
B.12.10 RequestNotificationChargingEvent 
INOP_RequestNotificationChargingEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ChargingEvent (SEQUENCE, n = 0 to 15) M 
EventTypeCharging INPN_EventTypeCharging(n) 272 to 287 0x110 to 0x11f M2 
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2 
LegID O2 
SendingSideID INPN_SendingSideID(n) 224 to 239 0xe0 to 0xef C3 
ReceivingSideID INPN_ReceivingSideID(n) 240 to 255 0xf0 to 0xff C3 
EventTypeTariff INPN_EventTypeTariff(n) 794 to 809 0x31a to 0x329 O2 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
215 
B.12.11 EventNotificationCharging  
INOP_EventNotificationCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeCharging INPN_EventTypeCharging(0) 272 0x110 M 
EventSpecificInformationCharging INPN_EventSpecificInformationCharging 58 0x3a O 
LegID O 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
MonitorMode INPN_MonitorMode(0) 208  0xd0  D 
EventTypeTariff INPN_EventTypeTariff(0) 794 0x31a O 
EventSpecificinformationTariff INPN_EventSpecificInformationTariff  707 0x2c3 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.12 CollectInformation  
INOP_CollectInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.13 Continue  
INOP_Continue 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
5 Non-Primitive Interface 
216 
B.12.14 InitiateCallAttempt  
INOP_InitiateCallAttempt 
Value  Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b M 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
ISDNAccessRelatedInformation INPN_ISDNAccessRelatedInformation 34 0x22 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceInteraction Indicators INPN_ServiceInteraction Indicators 20 0x14 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
LegID M 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
CallSegmentID INPN_CallSegmentID 320 0x140 M 
INServiceCompatibilityResponse O 
Agreements INPN_Agreements(0) 668 0x29c C2 
NetworkSpecific INPN_NetworkSpecific(0) 684 0x2ac C2 
ServiceInteractionIndicatorsTwo O 
ForwardServiceInteractionInd O2 
ConferenceTreatment Indicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7 O3 
CallDiversionTreatment Indicator INPN_CallDiversionTreatment Ind 712 0x2c8 O3 
CallOfferingTreatment Indicator INPN_CallOfferingTreatmentInd 713 0x2c9 O3 
CallingPartyRestrication Indicator INPN_CallingPartyRestrication Ind 714 0x2ca O3 
BackwardServiceInteractionInd O2 
ConferenceTreatmentIndicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6 O3 
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2cc O3 
BothwayThrough ConnectionInd INPN_BothwayThrough 
ConnectionIndicator 111 0x6f O2 
SuspendTimer INPN_SuspendTimer 717 0x2cd O2 
ConnectedNumberTreatment INPN_ConnectedNumberTreatment 718 0x2ce O2 
SupressCallDiversionNotification INPN_SuppressCallDiverNot 719 0x2cf O2 
SupressCallTransferNotification INPN_SuppressCallTransferNot 720 0x2d0 O2 
AllowCdINNoPresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2 
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2 
Carrier INPN_Carrier 40 0x28 O 
LocationNumber INPN_LocationNumber 13 0xd O 
BearerCapability O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
217 
INOP_InitiateCallAttempt 
Value  Parameter Mnemonic 
dec hex 
 
BearerCap INPN_BearerCapability 23 0x17 C2 
Tmr INPN_Tmr 104 0x68 C2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.15 ResetTimer  
INOP_ResetTimer 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TimerID INPN_TimerID 61 0x3d D 
TimerValue INPN_TimerValue 62 0x3e M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.16 FurnishChargingInformation 
INOP_FurnishChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeId INPN_InvokeId 1 0x1 M 
FurnishCharging 
InformationBilling 
ChargingCharacteristics 
INPN_FCIBCCS1 715 0x2cb M 
FCIBCCSequenceCS2 M 
FCIBCC INPN_FCIBCC 708 0x2c4 O 
Tariff O 
Crgt INPN_Crgt 810 0x32a M2 
Aocrg INPN_Aocrg 811 0x32b M2 
5 Non-Primitive Interface 
218 
B.12.17 ApplyCharging 
INOP_ApplyCharging 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
AchBillingCharging 
Characteristics INPN_AchBillingCharging Characteristics 52 0x34 M 
SendCalculationToSCP 
Indication 
Default = False 
INPN_SendCalculationToSCP 
Indication 53 0x35 D 
PartyToCharge O 
SendingSideID INPN_SendingSideID(0) 224 0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.18 ApplyChargingReport 
INOP_ApplyChargingReport  
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CallResult INPN_CallResult 55 0x37 M 
B.12.19 CallGap  
INOP_CallGap 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
GapCriteria M 
CalledAddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressAndService C2 
CallingAddressValue INPN_CallingAddressValue 99 0x63 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
LocationNumber INPN_LocationNumber 13 0xd O3 
GapOnService C2 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 C2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
219 
INOP_CallGap 
Value Parameter Mnemonic 
dec hex 
 
Null n/a 
GapIndicators M 
Gap Duration INPN_Gap_Duration 72 0x48 M2 
GapInterval INPN_GapInterval 73 0x49 M2 
ControlType INPN_ControlType 101 0x65 O 
GapTreatment O 
InformationToSend (see InformationToSend (Sub-table) on page 96) C2 
ReleaseCause INPN_ReleaseCause 96 0x60 C2 
Both C2 
InformationToSend (see InformationToSend (Sub-table) on page 96) M3 
ReleaseCause INPN_ReleaseCause 96 0x60 M3 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.20 ActivateServiceFiltering  
INOP_ActivateServiceFiltering 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
FilteredCallTreatment    M 
SFBillingCharging 
Characteristics INPN_SFBillingCharging Characteristics 92 0x5c M2 
InformationToSend (see InformationToSend (Sub-table) on page 96) O2 
MaximumNumberOf Counters INPN_MaximumNumberOf 
Counters 93 0x5d O2 
ReleaseCause INPN_ReleaseCause 96 0x60 O2 
sFTariffMessage  
ChargingTariff Information INPN_ChargingTariffInformation 932 0x3a4 03 
SFTarrifMessage Ellipsis INPN_SFTarrifMessage_Ellipsis 933 0x3a5 O3 
FilteringCharacteristics M 
Interval INPN_Interval 90 0x5a C2 
NumberOfCalls INPN_NumberOfCalls 97 0x61 C2 
FilteringTimeout M 
Filtering Duration INPN_Filtering_Duration 98 0x62 C2 
StopTime INPN_StopTime 100 0x64 C2 
5 Non-Primitive Interface 
220 
INOP_ActivateServiceFiltering 
Value Parameter Mnemonic 
dec hex 
 
FilteringCriteria M 
ServiceKey INPN_ServiceKey 3 0x3 C2 
AddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3 
LocationNumber INPN_LocationNumber 13 0xd O3 
StartTime    O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.21 ServiceFilteringResponse 
INOP_ServiceFilteringResponse 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CountersValue (SEQUENCE, size = 1 to 100)  M 
CounterID INPN_CounterID 328 to 427 0x148 to 0x1ab M2 
CounterValue INPN_CounterValue 428  to 527 0x1ac to 0x20f M2 
FilteringCriteria M 
ServiceKey INPN_ServiceKey 3 0x3 C2 
AddressAndService C2 
CalledAddressValue INPN_CalledAddressValue(0) 308 0x134 M3 
ServiceKey INPN_ServiceKey 3 0x3 M3 
CallingAddressValue INPN_CallingAddressValue 99 0x63 O3 
LocationNumber INPN_LocationNumber 13 0xd O3 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
221 
B.12.22 CallInformationReport 
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformationType INPN_RequestedInformationType 288 
to 
292 
0x120 
to 
0x124 
M2 
RequestedInformationValue M2 
CallAttemptEllapsed TimeValue  INPN_CallAttemptEllapsedTimeValue(n) 293 
to 
297 
0x125 
to 
0x129 
C3 
CallStopTimeValue INPN_CallStopTimeValue(n) 298 
to 
302 
0x12a 
to 
0x12e 
C3 
CallConnectedElapsedTimeValue INPN_CallConnectedElapsedTimeValue(n) 303 
to 
307 
0x12f 
to 
0x133 
C3 
CalledAddressValue INPN_CalledAddressValue(n) 308 
to 
312 
0x134 
to 
0x138 
C3 
ReleaseCauseValue INPN_ReleaseCauseValue(in 313 
to 
317 
0x139 
to 
0x13d 
C3 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
LegID O2 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C3 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.23 CallInformationRequest 
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInformationReport (SEQUENCE, size = 1 to 5)  M 
RequestedInformationType INPN_RequestedInformationType 288 to 
292 0x120 to 0x124 M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
LegID O2 
5 Non-Primitive Interface 
222 
INOP_CallInformationReport 
Value Parameter Mnemonic 
dec hex 
 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C3 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.24 SendChargingInformation 
INOP_SendChargingInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
SCIBillingCharging 
Characteristics INPN_SCIBillingCharging Characteristics 87 0x57 M 
LegID M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
TariffMessage INPN_TariffMessage 956 0x3bc O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Tariff message should be encoded as ChargingMessageType, as defined in 
ETSI ES 201 296. 
B.12.25 PlayAnnouncement  
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
O InformationToSend (see InformationToSend (Sub-table) on page 96) 
M2 
DisconnectFromIP 
Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
RequestAnnouncement 
Complete 
Default = True 
INPN_RequestAnnouncement Complete 60 0x3c D 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
LegID O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
223 
INOP_PlayAnnouncement 
Value Parameter Mnemonic 
dec hex 
 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C2 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.26 PromptAndCollectUserInformation 
INOP_PromptAndCollectUserInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CollectedInfo M 
CollectedDigits M2 
MinimumNumberOfDigits 
Default = 1 
INPN_MinimumNumberOfDigits 74 0x4a D3 
MaximumNumberOf Digits INPN_MaximumNumberOf Digits 75 0x4b M3 
EndOfReplyDigit INPN_EndOfReplyDigit 76 0x4c O3 
CancelDigit INPN_CancelDigit 77 0x4d O3 
StartDigit INPN_StartDigit 78 0x4e O3 
FirstDigitTimeOut INPN_FirstDigitTimeOut 79 0x4f O3 
InterDigitTimeOut INPN_InterDigitTimeOut 80 0x50 O3 
Errortreatment 
Default = StfErrorAndInfo  
INPN_Errortreatment 81 0x41 D3 
InterDigitTimeOut 
Default = True 
INPN_InterDigitTimeOut 82 0x42 D3 
InterruptableAndInd 
Default = False 
INPN_InterruptableAnnInd 83 0x43 D3 
VoiceBack 
Default = False 
INPN_VoiceBack 84 0x44 D3 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
O InformationToSend (see InformationToSend (Sub-table) on page 96) 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
224 
B.12.27 SpecializedResourceReport  
INOP_ SpecializedResourceReport 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
LinkedID INPN_LinkedID 2 0x2 O 
B.12.28 Cancel  
INOP_Cancel 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 O 
CallSegmentToCancel O 
Cancel_InvokeID INPN_Cancel_InvokeID 86 0x56 M2 
CallSegmentID INPN_CallSegmentID 320 0x140 M2 
If the parameter IPN_Cancel_InvokeID is not set, then the operation will be 
sent with the null parameter ‘All Requests’ indicating all operations on that 
dialogue should be cancelled. 
B.12.29 ActivityTest  
INOP_ ActivityTest 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
B.12.30 DFC_With_Argument  
INOP_DFC_with_Argument 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
LegOrCSID M 
LegID C2 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C3 
CallSegmentID INPN_CallSegmentID 320 0x140 C2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
225 
INOP_DFC_with_Argument 
Value Parameter Mnemonic 
dec hex 
 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.31 ContinueWithArgument 
INOP_ ContinueWithArgument 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
LegOrCSID M 
LegID C2 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0 C3 
CallSegmentID INPN_CallSegmentID_Array(0) 10040x3ecC2 
AlertingPattern INPN_AlertingPattern 30 0x1e O 
GenericName INPN_GenericName 934 0x3aeO 
INServiceCompatibilityResponse O 
Agreements INPN_Agreements 668 0x29cC2 
NetworkSpecific INPN_NetworkSpecific 684 0x2acC2 
ForwardGVNS INPN_ForwardGVNS 724 0x2d4O 
BackwardGVNS INPN_BackwardGVNS 723 0x2d3O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
ServiceInteractionIndicatorsTwo O 
ForwardServiceInteractionInd O2 
ServiceInt_Ind_Two INPN_ServiceInt_Ind_Two 942 0x3aeO 
ConferenceTreatmentIndicator INPN_Fw_ConferenceTreatmentInd 711 0x2c7O3 
CallDiversionTreatmentIndicator INPN_CallDiversionTreatmentInd 712 0x2c8O3 
CallOfferingTreatmentIndicator INPN_CallOfferingTreatmentInd 713 0x2c9O3 
CallingPartyRestricationIndicator INPN_CallingPartyRestricationInd 714 0x2caO3 
BackwardServiceInteractionInd O2 
ConferenceTreatmentIndicator INPN_Bw_ConferenceTreatmentInd 710 0x2c6O3 
CallCompletionTreatmentIndicator INPN_CallCompletionTreatmentInd 716 0x2ccO3 
BothwayThroughConnectionInd INPN_BothwayThroughConnectionIndicator 111 0x6f O2 
SuspendTimer INPN_SuspendTimer 717 0x2cdO2 
ConnectedNumberTreatment INPN_ConnectedNumberTreatment 718 0x2ceO2 
SupressCallDiversionNotification INPN_SuppressCallDiverNot 719 0x2cf O2 
5 Non-Primitive Interface 
226 
INOP_ ContinueWithArgument 
Value Parameter Mnemonic 
dec hex 
 
SupressCallTransferNotification INPN_SuppressCallTransferNot 720 0x2d0 O2 
AllowCdINNoPresentationInd INPN_AllowCdINNoPresentInd 721 0x2d1 O2 
UserDialogueDurationInd INPN_UserDialogueDuratInd 722 0x2d2 O2 
ServiceInteractionIndicatorsTwo 
_Ellipsis INPN_ServIntActInd2_Ellipsis 1404 0x57c O2 
LocationNumber INPN_LocationNumber 13 0xd O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.32 CreateCallSegmentAssociation  
INOP_CreateCallSegmentAssociation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.33 DisconnectLeg 
INOP_DisconnectLeg 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Leg to be released M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
227 
B.12.34 MergeCallSegments  
INOP_MergeCallSegments 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
SourceCallSegment INPN_SourceCallSegment(0) 1020 0x3fc M 
TargetCallSegment 
Default = 1 (InitialCallSegment) 
INPN_TargetCallSegment 936 0x3a8 D 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.35 MoveCallSegment  
INOP_MoveCallSegments 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
TargetCallSegment 
Association INPN_TargetCallSegment Association 937 0x3a7 M 
CallSegments (SEQUENCE, size = 1 to 16) M 
SourceCallSegment 
Default = 1 
(InitialCallSegment) 
INPN_SourceCallSegment(n) 1020 to 
1035 0x3fc to 0x40b D2 
NewCallSegment INPN_NewCallSegment(n) 1036 to 
1051 0x40c to 0x41b M2 
Legs M 
SourceLeg INPN_SourceLeg(n)   972   to   
987 0x3cc to 0x3db M2 
NewLeg INPN_NewLeg(n)      988   to 
1003 0x3dc to 0x3eb M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
228 
B.12.36 MoveLeg  
INOP_MoveLeg 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Leg ID to be move M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C2 
TargetCallSegment 
Default = 1 (InitialCallSegment) 
INPN_TargetCallSegment 936 0x3a8 D 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.37 SplitLeg 
INOP_SpliteLeg 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Leg ID to be split M 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C2 
NewCallSegment INPN_NewCallSegment(0) 1036 0x40c M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A  
B.12.38 EntityReleased  
INOP_EntityReleased 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CS Failure C 
CallSegmentID INPN_CallSegmentID 320 0x140 02 
Reason INPN_EntityReleased_Reason 943 0x3af O2 
Cause INPN_EntityReleased_Cause 944 0x3b0 02 
Ellipsis INPN_CSFailure_Ellipsis 945 0x3b1 A2 
BCSM Failure C 
Leg ID to be split M2 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
229 
INOP_EntityReleased 
Value Parameter Mnemonic 
dec hex 
 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C3 
Reason INPN_EntityReleased_Reason 943 0x3af O2 
Cause INPN_EntityReleased_Cause 944 0x3b0 O2 
Ellipsis INPN_BCSMFailure_Ellipsis 946 0x3b2 A2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.39 ManageTriggerData  
INOP_ManageTriggerData 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ActionIndicator INPN_ActionIndicator 947 0x3b3 M 
TriggerDataIdentifier M 
TriggerID INPN_EventTypeBCSM(0) 192 0cc0 M2 
ProfileIdentifier M2 
Access INPN_CalledPartyNumber 5 0x5 C3 
FacilityGroup C3 
TrunkGroupID INPN_TrunkGroupID  951 0x3b7 C4 
PrivateFacilityID INPN_PrivateFacilityID 952 0x3b8 C4 
HuntGroup INPN_HuntGroup  953 0x3b9 C4 
RouteIndex INPN_RouteIndex 954 0x3ba C4 
Ellipsis INPN_TriggerDataId_Ellipsis 950 0x3b6 A2 
RegistratorIdentifier INPN_RegistratorIdentifier 949 0x3b5 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
230 
B.12.40 RequestReportUTSI 
INOP_RequestReportUTSI 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedUTSIList (SEQUENCE, size 1..16) M 
USIServiceIndicator M2 
Global INPN_Global(n) 828 to 843 0x33c to 0x34b  C3 
Local INPN_Local(n) 844 to 859 0x34c to 35b  C3 
USIMonitorMode INPN_USIMonitorMode(n) 812 to 827 0x32c to 0x33b M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
LegID O2 
SendingSideID INPN_SendingSideID(0) 224  0xe0 D3 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C3 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.41 SendSTUI                       
INOP_SendSTUI 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
USIServiceIndicator M 
Global INPN_Global 828 0x33c C2 
Local INPN_Local 844 0x34c C2 
LegID O 
SendingSideID INPN_SendingSideID(0) 224  0xe0 D2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C2 
USIInformation INPN_USIInformation 704 0x2c0 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
231 
B.12.42 ReportUTSI 
INOP_ReportUTSI 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
USIServiceIndicator M 
Global INPN_Global(0) 828 0x33c C2 
Local INPN_Local(0) 844 0x34c C2 
LegID O 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  D2 
USIInformation INPN_USIInformation 704 0x2c0 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.43 PromptAndReceiveMessage  
INOP_PromptAndReceiveMessage 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
DisconnectFromIP Forbidden 
Default = True 
INPN_DisconnectFromIP Forbidden 59 0x3b D 
O InformationToSend (see InformationToSend (Sub-table) on page 96) 
M2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
SubscriberID INPN_SubscriberID 321 0x141 O 
MailBoxID INPN_MailBoxID 322 0x142 O 
InformationToRecord M 
Record_MessageID INPN_Record_MessageID 630  O2 
MessageDeletionTime Out INPN_MessageDeletionTime Out 625 0x271 O2 
TimeToRecord INPN_TimeToRecord 626 0x272 O2 
Control Digits O2 
EndOfRecordingDigit INPN_EndOfRecordingDigit 553 0x229 O3 
CancelDigit          INPN_CancelDigit          77 0x4d O3 
ReplayDigit         INPN_ReplayDigit         554 0x22a O3 
RestartRecordingDigit INPN_RestartRecordingDigit 555 0x22b O3 
RestartAllowed  
Default = False      
INPN_RestartAllowed  556 0x22c D3 
5 Non-Primitive Interface 
232 
INOP_PromptAndReceiveMessage 
Value Parameter Mnemonic 
dec hex 
 
ReplayAllowed 
Default = False 
INPN_ReplayAllowed 557 0x22d D3 
ControlDigits_Ellipsis INPN_ControlDigits_Ellipsis 558 0x22e A3 
InfoToRecord_Ellipsis INPN_InfoToRecord_Ellipsis 559 0x22f A2 
Media 
Default = VoiceMail (0) 
INPN_Media 323 0x143 D 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.44 ScriptInformation  
INOP_ScriptInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C 
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C 
ScriptSpecificInfo INPN_ScriptSpecificInfo 326 0x146 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.45 ScriptEvent  
INOP_ScriptEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C 
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C 
ScriptResult INPN_ScriptResult 327 0x146 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
LastEventIndicator INPN_LastEventIndicator 627 0x273 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
233 
B.12.46 ScriptRun  
INOP_ScriptRun 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C 
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C 
ScriptSpecificInfo INPN_ScriptSpecificInfo 326 0x146 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
DisconnectFromIP 
Forbidden INPN_DisconnectFromIP Forbidden 59 0x3b O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.47 ScriptClose  
INOP_ScriptClose 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ScriptId Local Identifier INPN_ScriptId_Local 324 0x144 C 
ScriptId Global Identifier INPN_ScriptId_Global 325 0x145 C 
ScriptSpecificInfo INPN_ScriptSpecificInfo 326 0x146 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CallSegmentID INPN_CallSegmentID 320 0x140 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.48 EstablishChargingRecord  
INOP_EstablishChargingRecord 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
UserCredit O 
Currancy C2 
CurrencyID INPN_CurrencyID 1244 0x4dc M3 
Amount INPN_Amount 1245 0x4dd M3 
CurrencyValue Ellipsis INPN_CurrencyValue_Ellipsis 1246 0x4de A3 
CreditUnit INPN_CreditUnit 1368 0x C2 
ChargingParameters O 
5 Non-Primitive Interface 
234 
INOP_EstablishChargingRecord 
Value Parameter Mnemonic 
dec hex 
 
UnitsPerInterval INPN_UnitsPerInterval 1247 0x4df M2 
TimePerInterval INPN_TimePerInterval  1248 0x4e0 M2 
ScalingFactor  INPN_ScalingFactor  1249 0x4e1 M2 
InitialUnitIncrement INPN_InitialUnitIncrement 1250 0x4e2 O2 
UnitsPerDataInterval INPN_UnitsPerDataInterval 1251 0x4e3 O2 
SegmentsPerData Interval INPN_SegmentsPerDataInterval 1252 0x4e4 O2 
InitialTimeInterval INPN_InitialTimeInterval 1253 0x4e4 O2 
ChargingParameters  Ellipsis INPN_ChargingParameters_ Ellipsis 1254 0x4e6 O2 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath INPN_AttributeCertificationPath  1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
ReportExpected 
Default = True 
INPN_ReportExpected 1278 0x4fe O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.49 HandlingInformationRequest  
INOP_HandlingInformationRequest 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedType INPN_RequestedType 1279 0x4ff O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
LocationNumber INPN_LocationNumber 13 0xd O 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
DialledDigits INPN_DialledDigits 4 0x4 O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
235 
INOP_HandlingInformationRequest 
Value Parameter Mnemonic 
dec hex 
 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
NumberOfCallAttempts INPN_NumberOfCallAttempts 1280 0x500 O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x19 O 
BearerCapability INPN_BearerCapability 23 0x17 O 
InvokedSupplementary Service INPN_InvokedSupplementary Service 1281 0x501 O 
ActiveSupplementary  Services INPN_ActiveSupplementary Services 1282 0x502 O 
CauseOfLastCallFailure INPN_CauseOfLastCallFailure 1283 0x503 O 
UserInteractionModes INPN_UserInteractionModes 1284 0x504 O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
CallingPartyBusinessGroupID INPN_CallingPartyBusiness GroupID 7 0x7 O 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.50 HandlingInformationResult  
INOP_HandlingInformationResult 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RoutingAddress O 
RoutingProhibited INPN_RoutingProhibited 1260 0x4ec C2 
DestinationRouting Address INPN_DestinationRouting Address(0) 27 0x1b C2 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x19 O 
SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O 
PreferredLanguagge INPN_PreferredLanguage 1285 0x505 O 
Carrier INPN_Carrier 40 0x28 O 
5 Non-Primitive Interface 
236 
INOP_HandlingInformationResult 
Value Parameter Mnemonic 
dec hex 
 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
OriginalCalledPartyID INPN_OriginalCalledPartyID 15 0xf O 
RedirectingPartyID INPN_RedirectingPartyID 25 0x19 O 
RedirectionInformation INPN_RedirectionInformation 26 0x1a O 
CallingPartysCategory INPN_CallingPartysCategory 8 0x8 O 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.51 NetworkCapability 
INOP_NetworkCapability 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BearerCapabilities (Bitstring) INPN_Bits_BearerCapabilities 1286 0x506 O 
HighLayerCompatiblities 
(Bitstring) INPN_Bits_HighLayer Compatiblities 1287 0x507 O 
SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
237 
INOP_NetworkCapability 
Value Parameter Mnemonic 
dec hex 
 
AttributeCertificationPath  INPN_AttributeCertificationPath  1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.52 NotificationProvided  
INOP_NotificationProvided 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Notification INPN_Notification   M 
Notification Information O 
UserAbandon C2 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
CallFailure C2 
FailureCause INPN_FailureCause 94 0x5e  
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
NoReply C2 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
CallRelease C2 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
TimeStamp INPN_TimeStamp 1292 0x50c O3 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
SSInvocation C2 
InvokableService INPN_InvokableService 1293 0x50d O3 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
CreditLimitReached C2 
TimeStamp INPN_TimeStamp 1292 0x50c O3 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
CallDuration C2 
TimeStamp INPN_TimeStamp 1292 0x50c O3 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
CalledNumber C2 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O3 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
5 Non-Primitive Interface 
238 
INOP_NotificationProvided 
Value Parameter Mnemonic 
dec hex 
 
AnsweredCall C2 
TimeStamp INPN_TimeStamp 1292 0x50c O3 
EventSpecInfo Ellipsis INPN_EventSpecInfo_Ellipsis 113 0x71 A3 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.53 ConfirmedNotificationProvided  
As per Section B.12.52 NotificationProvided on page 237. 
B.12.54 ProvideUserInformation  
INOP_ProvideUserInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Constraints M 
MaximumNumberOf Digits  INPN_MaximumNumberOfDigits  75 0x4b  
MinimumNumberOf Digits  INPN_MinimumNumberOfDigits  74 0x4a  
TypeOfRequestedInfo 
Default = numericString 0 
INPN_TypeOfRequestedInfo 1097 0x449 D2 
NumberOfAllowedRetries 
Default = 0 
INPN_NumberOfAllowedRetries 1098 0x44a D2 
O Info to send (See InformationToSend (Sub-table) on page 96) 
M2 
O Error Info (See Error InformationToSend (Sub-table) on page 239) 
M2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
239 
INOP_ProvideUserInformation 
Value Parameter Mnemonic 
dec hex 
 
TypeOfRequestedInfo 
Default = numericString 0 
INPN_TypeOfRequestedInfo 1097 0x449 D 
NumberOfAllowedRetries 
Default = 0 
INPN_NumberOfAllowedRetries 1098 0x44a D 
Actions INPN_Actions 1290 0x50a O 
PreferredLanguagge INPN_PreferredLanguage 1285 0x505 O 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Error InformationToSend (Sub-table)  
Error InformationToSend 
Value Parameter Mnemonic 
dec hex 
 
InbandInfo C 
MessageID O2 
ElementaryMessageID INPN_Error_Elementary 
MessageID 1258 0x4ea C3 
Text C3 
MessageContent INPN_ Error_MessageContent 1255 0x4e7 M4 
Attributes INPN_ Error_Attributes 1256 0x4e8 O4 
ElementaryMessageIDs INPN_ Error_Elementary 
MessageIDs(n) 1052 to 1067 0x41c to 0x42b  C3 
VariableMessage C3 
ElementaryMessageID INPN_ Error_Variable_ MessageID 1257 0x4e9 C4 
VariableParts M4 
Integer INPN_ Error_Integer(n) 1068 to 
1072 0x42c to 0x430 C5 
5 Non-Primitive Interface 
240 
Error InformationToSend 
Value Parameter Mnemonic 
dec hex 
 
Number INPN_ Error_Number(n) 1073 to 
1077 0x431 to  0x435 C5 
Time INPN_ Error_Time(n) 1078 to 
1082 0x436 to 0x43a C5 
Date INPN_ Error_Date(n) 1083 to 
1087 0x43b to 0x43f C5 
Price INPN_ Error_Price(n) 1088 to 
1092 0x440 to 0x444 C5 
NumberOfRepetitions INPN_ Error_NumberOf 
Repetitions 1093 0x445 O2 
Duration INPN_ Error_Duration 1094 0x446 O2 
Interval INPN_ Error_Interval 1095 0x447 O2 
Tone C 
ToneID INPN_ Error_ToneID 1259 0x4eb M2 
Duration  INPN_ Error_Duration 1094 0x446 O2 
DisplayInformation INPN_ Error_DisplayInformation 1096 0x447 C 
B.12.55 ConfirmedReportChargingInformation  
As per Section B.12.56 ReportChargingInformation below. 
B.12.56 ReportChargingInformation  
INOP_ReportChargingInformation 
Value Parameter 
 
Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CallRecord O 
Duration INPN_Duration 89 0x59 M2 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 M2 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M2 
CallRecord_Ellipsis INPN_CallRecord_Ellipsis 1099 0x44b A2 
UserCredit O 
CurrencyValue C2 
CurrencyID INPN_CurrencyID 1244 0x4dc M3 
Amount INPN_Amount 1245 0x4dd M3 
CurrencyValue Ellipsis INPN_CurrencyValue_Ellipsis 1246 0x4de A3 
CreditUnit INPN_CreditUnit 1368 0x558 C2 
UniqueCallID INPN_UniqueCallID 1289 0x509 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
241 
INOP_ReportChargingInformation 
Value Parameter 
 
Mnemonic 
dec hex 
 
AccountNumber INPN_AccountNumber 1291 0x50b O 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.57 RequestNotification 
INOP_RequestNotification 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedNotifications  (Request up to 9 notifications, n = 0 up to 8) O 
UserAbandon(n) INPN_UserAbandon(n) 1100 to 1115 0x44c to 
0x45b C2 
CallFailure(n) INPN_CallFailure(n) 1116 to  1131 0x45c to  
0x46b C2 
NoReply(n) INPN_NoReply(n) 1132 to 1147 0x46c to 
0x47b C2 
CallRelease(n) INPN_CallRelease(n) 1148 to 1163 0x47c to 
0x48b C2 
SS_Invocation(n) INPN_SS_Invocation(n) 1164 to 1179 0x48c to 
0x49b C2 
CreditLimitReached(n) INPN_CreditLimitReached(n) 1180 to 1195 0x49c to 
0x4ab C2 
CallDuration(n) INPN_CallDuration(n) 1196 to 1211 0x4ac to 
0x4bb C2 
CalledNumber(n) INPN_CalledNumber(n) 1212 to 1227 0x4bc to 
0x4cb C2 
AnsweredCall(n)  INPN_AnsweredCall(n)  1228 to 1243 0x4cc to 
0x4db C2 
SecurityParameters O 
5 Non-Primitive Interface 
242 
INOP_RequestNotification 
Value Parameter Mnemonic 
dec hex 
 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random  INPN_Random  1297 0x511 O2 
Target  INPN_Target  1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode  INPN_OperationCode  1300 0x514 O2 
AttributeCertificationPath   INPN_AttributeCertificationPath   1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.58 InitiateAssociation   
INOP_InitiateAssociation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
USIServiceIndicator O 
Global INPN_Global(0) 828 0x33c C2 
Local INPN_Local(0) 844 0x34c C2 
USIInformation INPN_USIInformation 704 0x2c0 O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
243 
B.12.59 ReleaseAssociation 
INOP_ReleaseAssociation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Cause INPN_Cause 41 0x29 M 
B.12.60 RequestReportBCUSMEvent 
INOP_RequestReportBCUSMEvent 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
BCUSMEvents (0..15) M 
EventType INPN_EventTypeBCUSM(n) 728 to 743 0x2d8 to 0x2e7 M2 
MonitorMode INPN_MonitorMode(n) 208 to 223 0xd0 to 0xdf M2 
Duration INPN_Duration 89 0x59 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
CUDPCriteria O 
LocalValue INPN_LocalValue 702 0x2be C2 
Global INPN_Global(0) 828 0x33c C2 
LegID O 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C2 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
244 
B.12.61 InitialAssociationDP 
INOP_InitialAssociationDP 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
  Servicekey INPN_Duration 89 0x59 M 
CUApplicationInd O 
LocalValue INPN_LocalValue 702 0x2be C2 
Global INPN_Global(0) 828 0x33c C2 
MiscCallInfo   O 
MessageType INPN_MessageType 56 0x38 M2 
EventTypeBCUSM INPN_EventTypeBCUSM(0) 728 0x2d8 O 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 O 
CallingPartyNumber INPN_CallingPartyNumber 6 0x6 O 
CallingPartySubAddress INPN_CallingPartySubaddress 9 0x9 O 
HighLayerCompatibility INPN_HighLayerCompatibility 19 0x13 O 
BearerCapability    O 
BearerCap INPN_BearerCapability 23 0x17 C2 
Tmr INPN_Tmr 104 0x68 C2 
USIServiceIndicator O 
Global INPN_Global(0) 828 0x33c C2 
Local INPN_Local(0) 844 0x34c C2 
USIInformation INPN_USIInformation 704 0x2c0 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.62 ConnectAssociation 
INOP_ConnectAssociation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
CalledPartyNumber INPN_CalledPartyNumber 5 0x5 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
245 
B.12.63 ContinueAssociation 
INOP_ContinueAssociation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
B.12.64 EventReportBCUSM 
INOP_InitiateAssociation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
EventTypeBCUSM INPN_EventTypeBCUSM(0) 728 0x2d8 O 
EventSpecificInformationBCUSM O 
ComponentReceivedSpecificInfo C2 
ComponentReceivedinfo INPN_CompRecSpecInfo 705 0x2c1 O3 
AssociationReleaseRequestedSpecificInfo C2 
AssociationReleaseInfo INPN_AssRelReqSpecInfo 706 0x2c2 O3 
ReleaseCause INPN_ReleaseCause 96 0x60 O3 
MiscCallInfo O 
MessageType INPN_Messagetype 56 0x38 M2 
CUApplicationInd    O 
LocalValue INPN_LocalValue 702 0x2be C2 
Global INPN_Global(0) 828 0x33c C2 
LegID O 
SendingSideID INPN_SendingSideID(0) 224  0xe0 C2 
ReceivingSideID INPN_ReceivingSideID(0) 240 0xf0  C2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
5 Non-Primitive Interface 
246 
B.13 AIN Operation Definitions 
B.13.1 AnalyzeRoute 
INOP_AnalyzeRoute 
Value Parameter Mnemonic 
dec hex 
 
InvokeID AINPN_InvokeID 1 0x1 M 
ChargeNumber AINPN_ChargeNumber 6 0x6 O 
CallingPartyID AINPN_CallingPartyID 7 0x7 O 
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O 
CalledPartyID AINPN_CalledPartyID 3 0x3 O 
OutpulseNumber AINPN_OutpulseNumber 50 0x32 O 
Tcm AINPN_Tcm 13 0xd O 
PrimaryTrunkGroup AINPN_PrimaryTrunkGroup 51 0x33 O 
AlternateTrunkGroup AINPN_AlternateTrunkGroup 52 0x34 O 
SecondAlternateTrunkGroup AINPN_SecondAlternateTrunkGroup 53 0x35 O 
PassiveLegTreatment AINPN_PassiveLegTreatment 56 0x38 O 
RedirectingPartyID AINPN_RedirectingPartyID 548 0x224 O 
PrimaryBillingIndicator AINPN_PrimaryBillingInd 57 0x39 O 
AlternateBillingIndicator AINPN_AlternateBillingInd 58 0x3a O 
SecondAlternateBillingIndicator AINPN_SecondAlternateBillingInd 59 0x3b O 
OverflowBillingIndicator AINPN_OverflowBillingInd 60 0x3c O 
AMAAlternateBillingNumber AINPN_AMAAlternateBillingNumber 61 0x3d O 
AMABusinessCustomerID AINPN_AMABusinessCustomerID 62 0x3e O 
AMALineNumberList (SEQUENCE, size = 0 to 1) O 
AMALineNumber AINPN_AMALineNumber 69 to 70 0x45 to 
0x46 M2 
AMAslpID AINPN_AMAslpID 63 0x3f O 
AMADigitsDialedWCList (SEQUENCE, size = 0 to 4) O 
AMADigitsDialedWC AINPN_AMADigitsDialedWC 71 to 75 0x47 to 
0x4b M2 
Amp1 AINPN_Amp1 15 0xf O 
Amp2 O 
AmpAINNodeID M2 
SpcID AINPN_SpcID 32 0x20 C3 
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3 
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
247 
INOP_AnalyzeRoute 
Value Parameter Mnemonic 
dec hex 
 
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2 
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2 
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2 
AmpCLogName AINPN_AmpCLogName 38 0x26 O2 
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2 
ServiceProviderID O 
Ocn AINPN_Ocn 553 0x229 C2 
MsrID AINPN_MsrID 554 0x22a C2 
ServiceContext AINPN_ServiceContext 64 0x40 O 
AMABillingFeature AINPN_AMABillingFeature 65 0x41 O 
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O 
RedirectionInformation AINPN_RedirectionInformation 549 0x225 O 
CarrierUsage AINPN_CarrierUsage 66 0x42 O 
ExtensionParameter O 
GenericAddressList (SEQUENCE, size = 0 to 4) O 
GenericAddress AINPN_GenericAddress 40 to 44 0x28 to 
0x2c M2 
NetworkSpecificFacilities AINPN_NetworkSpecificFacilities 19 0x13 O 
CallingPartyBGID AINPN_CallingPartyBGID 546 0x222 O 
ForwardCallIndicators AINPN_ForwardCallIndicators 550 226 O 
AMAServiceProvider AINPN_AMAServiceProviderID 67 0x43 O 
Prefix AINPN_Prefix 22 0x16 O 
GenericDigitsList (SEQUENCE, size = 0 to 4) O 
GenericDigits AINPN_GenericDigits 45 to 49 0x2d to 
0x31 M2 
ApplyRestrictions AINPN_ApplyRestrictions 68 0x44 O 
DisplayText (SEQUENCE, size = 0 to 14) O 
DisplayInformation M2 
Blank AINPN_Blank 76 to 90 0x4c to 
0x5a C3 
Skip AINPN_Skip 91 to 105 0x5b to 
0x69 C3 
Continuation AINPN_Continuation 106 to 
120 0x6a to 0x78 C3 
CalledAddress AINPN_CalledAddress 121 to 
135 0x79 to 0x87 C3 
Cause AINPN_Cause 136 to 
150 0x88 to 0x96 C3 
5 Non-Primitive Interface 
248 
INOP_AnalyzeRoute 
Value Parameter Mnemonic 
dec hex 
 
ProgressInd AINPN_ProgressInd 151 to 
165 0x97 to 0xa5 C3 
NotificationInd AINPN_NotificationInd 166 to 
180 0xa6 to 0xb4 C3 
Prompt AINPN_Prompt 181 to 
195 0xb5 to 0xc3 C3 
AccumulatedDigits AINPN_AccumulatedDigits 196 to 
210 0xc4 to 0xd2 C3 
Status AINPN_Status 211 to 
225 0xd3 to 0xe1 C3 
Inband AINPN_Inband 226 to 
240 0xe2 to 0xf0 C3 
CallingAddress AINPN_CallingAddress 241 to 
255 0xf1 to 0xff C3 
Reason AINPN_Reason 256 to 
270 100 to 0x10e C3 
CallingPartyName AINPN_CallingPartyName 271 to 
285 0x10f to 
0x11d 
C3 
CalledPartyName AINPN_CalledPartyName 286 to 
300 0x11e to x12c C3 
OriginalCalledName AINPN_OrigCalledName 301 to 
315  0x12d to 
0x13b 
C3 
RedirectingName AINPN_RedirectingName 316 to 
330 0x13c to 
0x14a 
C3 
ConnectedName AINPN_ConnectedName 331 to 
345 0x14b to 
0x159 
C3 
OrigRestrictions AINPN_OrigRestrictions 346 to 
360 0x15a to 
0x168 
C3 
DateTimeOfDay AINPN_DateTimeOfDay 361 to 
375 0x169 to 
0x177 
C3 
CallAppearanceID AINPN_CallAppearanceID 376 to 
390 0x178 to 
0x186 
C3 
FeatureAddress AINPN_FeatureAddress 391 to 
405 0x187 to 
0x195 
C3 
RedirectionName AINPN_RedirectionName 406 to 
420 0x196 to 
0x1a4 
C3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
249 
INOP_AnalyzeRoute 
Value Parameter Mnemonic 
dec hex 
 
RedirectionNumber  AINPN_RedirectionNumber  421 to 
435 0x1a5 to 
0x1b3 
C3 
RedirectingNumber AINPN_RedirectingNumber 436 to 
450 0x1b4 to 
0x1c2 
C3 
OriginalCalledNumber AINPN_OrigCalledNumber 451 to 
465 0x1c3 to 
0x1d1 
C3 
ConnectedNumber AINPN_ConnectedNumber 466 to 
480 0x1d2 to 
0x1e0 
C3 
Text AINPN_Text 481 to 
495 0x1e1 to 
0x1ef 
C3 
RedirectingReason AINPN_RedirectingReason 496 to 
510 0x1f0 to 
0x1fe 
C3 
GenericName AINPN_GenericName 551 0x227 O 
B.13.2 InfoAnalyzed 
INOP_InfoAnalyzed 
Value Parameter Mnemonic 
dec hex 
 
InvokeID AINPN_InvokeID 1 0x1 M 
UserID M 
Dn AINPN_Dn 26 0x1a C2 
BRI C2 
Spid AINPN_Spid 25 0x19 M3 
Dn AINPN_Dn 26 0x1a M3 
TrunkGroupID AINPN_TrunkGroupId 27 0x1b C2 
PrivateFacilityGID AINPN_PrivateFacilityGID 28 0x1c C2 
ADSIcpeID AINPN_ADSIcpeID 29 0x1d C2 
Ssp AINPN_Ssp 30 0x1e C2 
DialingPlan AINPN_DialingPlan 31 0x1f C2 
BearerCapability AINPN_BearerCapability 545 0x221 M 
CalledPartyID AINPN_CalledPartyID 3 0x3 O 
Lata AINPN_Lata 4 0x4 O 
TriggerCriteriaType AINPN_TriggerCritType 5 0x5 O 
ChargeNumber AINPN_ChargeNumber 6 0x6 O 
5 Non-Primitive Interface 
250 
INOP_InfoAnalyzed 
Value Parameter Mnemonic 
dec hex 
 
CallingPartyID AINPN_CallingPartyID 7 0x7 O 
CallingPartyBGID AINPN_CallingPartyBGID 546 0x222 O 
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O 
Carrier AINPN_Carrier 552 0x228 O 
AccessCode AINPN_AccessCode 9 0x9 O 
CollectedAddressInfo AINPN_CollectedAddressInfo 10 0xa O 
VerticalServiceCode AINPN_VerticalServiceCode 12 0xc O 
Tcm AINPN_Tcm 13 0xd O 
OriginalCalledPartyID AINPN_OriginalCalledPartyID 547 0x223 O 
RedirectingPartyID AINPN_RedirectingPartyID 548 0x224 O 
RedirectionInformation AINPN_RedirectionInformation 549 0x225 O 
ACGEncountered AINPN_ACGEncountered 14 0xe O 
Amp1 AINPN_Amp1 15 0xf O 
Amp2 O 
AmpAINNodeID M2 
SpcID AINPN_SpcID 32 0x20 C3 
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3 
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2 
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2 
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2 
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2 
AmpCLogName AINPN_AmpCLogName 38 0x26 O2 
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2 
Sap AINPN_Sap 16 0x10 O 
STRConnection AINPN_STRConnection 17 0x11 O 
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O 
ExtensionParameter O 
GenericAddressList (SEQUENCE, size = 0 to 4) O 
GenericAddress AINPN_GenericAddress 40  
to 
44 
0x28  
to 0x2c M2 
NetworkSpecificFacilities AINPN_NetworkSpecificFacilities 19 0x13 O 
CTRConnection AINPN_CTRConnection 20 0x14 O 
JurisdictionInformation AINPN_JurisdictionInformation 21 0x15 O 
Prefix AINPN_Prefix 22 0x16 O 
GenericDigitsList (SEQUENCE, size = 0 to 4) O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
251 
INOP_InfoAnalyzed 
Value Parameter Mnemonic 
dec hex 
 
GenericDigits AINPN_GenericDigits 45  
to 
49 
0x2d  
to 0x31 M2 
CallingGeodeticLocation AINPN_CallingGeodeticLocation 23 0x17 O 
TriggerInformation AINPN_TriggerInformation 24 0x18 O 
B.13.3 InfoCollected 
INOP_infoCollected  
Value Parameter Mnemonic 
dec hex 
 
InvokeID AINPN_InvokeID 1 0x1 M 
UserID M 
Dn AINPN_Dn 26 0x1a C2 
BRI C2 
Spid AINPN_Spid 25 0x19 M3 
Dn AINPN_Dn 26 0x1a M3 
TrunkGroupID AINPN_TrunkGroupId 27 0x1b C2 
PrivateFacilityGID AINPN_PrivateFacilityGID 28 0x1c C2 
ADSIcpeID AINPN_ADSIcpeID 29 0x1d C2 
Ssp AINPN_Ssp 30 0x1e C2 
DiallingPlan AINPN_DiallingPlan 31 0x1f C2 
BearerCapability AINPN_BearerCapability 545 0x221 M 
ChargeNumber AINPN_ChargeNumber 6 0x6 O 
Lata AINPN_Lata 4 0x4 O 
TriggerCriteriaType AINPN_TriggerCritType 5 0x5 O 
CallingPartyID AINPN_CallingPartyID 7 0x7 O 
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O 
AccessCode AINPN_AccessCode 9 0x9 O 
CollectedAddressInfo AINPN_CollectedAddressInfo 10 0xa O 
VerticalServiceCode AINPN_VerticalServiceCode 12 0xc O 
Tcm AINPN_Tcm 13 0xd O 
OriginalCalledPartyID AINPN_OriginalCalledPartyID 547 0x223 O 
RedirectingPartyID AINPN_RedirectingPartyID 548 0x224 O 
RedirectionInformation AINPN_RedirectionInformation 549 0x225 O 
ACGEncountered AINPN_ACGEncountered 14 0xe O 
Amp1 AINPN_Amp1 15 0xf O 
5 Non-Primitive Interface 
252 
INOP_infoCollected  
Value Parameter Mnemonic 
dec hex 
 
Amp2 O 
AmpAINNodeID M2 
SpcID AINPN_SpcID 32 0x20 C3 
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3 
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2 
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2 
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2 
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2 
AmpCLogName AINPN_AmpCLogName 38 0x26 O2 
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2 
Sap AINPN_Sap 16 0x10 O 
GenericAddressList (SEQUENCE, size = 0 to 4) O 
GenericAddress AINPN_GenericAddress 40  
to 44 0x28  to 0x2c M2 
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O 
ExtensionParameter O 
Prefix AINPN_Prefix 22 0x16 O 
GenericDigitsList (SEQUENCE, size = 0 to 4) O 
GenericDigits AINPN_GenericDigits 45  
to 49 0x2d  to 0x31 M2 
CallingGeodeticLocation AINPN_CallingGeodeticLocation 23 0x17 O 
TriggerInformation AINPN_TriggerInformation 24 0x18 O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
253 
B.13.4 Disconnect 
INOP_Disconnect 
Value Parameter Mnemonic 
dec hex 
 
InvokeID AINPN_InvokeID 1 0x1 M 
PrimaryBillingIndicator AINPN_PrimaryBillingInd 57 0x39 O 
AMAAlternateBillingNumber AINPN_AMAAlternateBillingNumber 61 0x3d O 
AMABusinessCustomerID AINPN_AMABusinessCustomerID 62 0x3e O 
AMALineNumberList (SEQUENCE, size = 0 to 1) O 
AMALineNumber AINPN_AMALineNumber 69 to 
70 0x45 to 0x46 M2 
AMAslpID AINPN_AMAslpID 63 0x3f O 
AMADigitsDialedWCList (SEQUENCE, size = 0 to 4) O 
AMADigitsDialedWC AINPN_AMADigitsDialedWC 71 to 
75 0x47 to 0x4b M2 
Amp1 AINPN_Amp1 15 0xf O 
Amp2 O 
AmpAINNodeID M2 
SpcID AINPN_SpcID 32 0x20 C3 
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3 
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2 
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2 
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2 
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2 
AmpCLogName AINPN_AmpCLogName 38 0x26 O2 
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2 
ServiceProviderID O 
Ocn AINPN_Ocn 553 0x229 C2 
MsrID AINPN_MsrID 554 0x22a C2 
ServiceContext AINPN_ServiceContext 64 0x40 O 
AMABillingFeature AINPN_AMABillingFeature 65 0x41 O 
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O 
ExtensionParameter O 
AMAServiceProvider AINPN_AMAServiceProviderID 67 0x43 O 
RTPReroutingNumber AINPN_RTPReroutingNumber 511 0x1ff O 
5 Non-Primitive Interface 
254 
B.13.5 SendToResource 
INOP_SendToResource 
Value Parameter Mnemonic 
dec hex 
 
InvokeID AINPN_InvokeID 1 0x1 M 
ResourceType AINPN_ResourceType 515 0x203 M 
StrParameterBlock M 
AnnouncementBlock C2 
UninterAnnounceBlock (SEQUENCE, size = 0 to 9) O3 
AnnounceElement AINPN_AnnounceElement0 524 to 
533 0x20c to 0x215 M4 
InterAnnounceBlock (SEQUENCE, size = 0 to 9) O3 
AnnounceElement AINPN_AnnounceElement1 534 to 
543 0x216 to 0x21f M4 
AnnouncementDigitBlock C2 
MaximumDigits AINPN_MaximumDigits 523 0x20b M3 
UninterAnnounceBlock (SEQUENCE, size = 0 to 9) O3 
AnnounceElement AINPN_AnnounceElement0 524 to 
533 0x20c to 0x215 M4 
InterAnnounceBlock (SEQUENCE, size = 0 to 9) O3 
AnnounceElement AINPN_AnnounceElement1 534 to 
543 0x216 to 0x21f M4 
FlexParameterBlock AINPN_FlexParameterBlk 522 0x20a C2 
DisconnectFlag AINPN_DisconnectFlag 516 0x204 O 
AnswerIndicator AINPN_AnswerIndicator 517 0x205 O 
PrimaryBillingIndicator AINPN_PrimaryBillingInd 57 0x39 O 
AMAAlternateBillingNumber AINPN_AMAAlternateBillingNumber 61 0x3d O 
AMABusinessCustomerID AINPN_AMABusinessCustomerID 62 0x3e O 
AMALineNumberList (SEQUENCE, size = 0 to 1) O 
AMALineNumber AINPN_AMALineNumber 69 to 
70 0x45 to 0x46 M2 
AMAslpID AINPN_AMAslpID 63 0x3f O 
AMADigitsDialedWCList (SEQUENCE, size = 0 to 4) O 
AMADigitsDialedWC AINPN_AMADigitsDialedWC 71 to 
75 0x47 to 0x4b M2 
Amp1 AINPN_Amp1 15 0xf O 
Amp2 O 
AmpAINNodeID M2 
SpcID AINPN_SpcID 32 0x20 C3 
ISDNDeviceID AINPN_ISDNDeviceID 33 0x21 C3 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
255 
INOP_SendToResource 
Value Parameter Mnemonic 
dec hex 
 
AmpClogSeqNo AINPN_AmpClogSeqNo 34 0x22 O2 
AmpCLogRepInd AINPN_AmpCLogRepInd 35 0x23 O2 
AmpCallProgInd AINPN_AmpCallProgInd 36 0x24 O2 
AmpTestReqInd AINPN_AmpTestReqInd 37 0x25 O2 
AmpCLogName AINPN_AmpCLogName 38 0x26 O2 
AmpSvcProvID AINPN_AmpSvcProvID 39 0x27 O2 
DestinationAddress AINPN_DestinationAddress 512 0x200 O 
DPConverter AINPN_DPConverter 513 0x201 O 
AMAMeasure AINPN_AMAMeasure 514 0x202 O 
ServiceProviderID O 
Ocn AINPN_Ocn 553 229 C2 
MsrID AINPN_MsrID 554 0x22a C2 
ServiceContext AINPN_ServiceContext 64 0x40 O 
AMABillingFeature AINPN_AMABillingFeature 65 0x41 O 
AMASequenceNumber AINPN_AMASequenceNumber 18 0x12 O 
ExtensionParameter O 
AMAServiceProvider AINPN_AMAServiceProviderID 67 0x43 O 
ExtendedRinging AINPN_ExtendedRinging 518 0x206 O 
Carrier AINPN_Carrier 552 0x228 O 
AlternateCarrier AINPN_AlternateCarrier 54 0x36 O 
SecondAlternateCarrier AINPN_SecondAlternateCarrier 55 0x37 O 
CarrierUsage AINPN_CarrierUsage 66 0x42 O 
ChargeNumber AINPN_ChargeNumber 6 0x6 O 
ChargePartyStationType AINPN_ChargePartyStationType 8 0x8 O 
TSTRCTimer AINPN_TSTRCTimer 519 0x207 O 
PartyID AINPN_PartyID 520 0x208 O 
PartyOnHold AINPN_PartyOnHold 521 0x209 O 
CalledPartyID AINPN_CalledPartyID 3 0x3 O 
5 Non-Primitive Interface 
256 
B.13.6 Application Error  
The Application Error operation is used to report errors in the other AIN 
operations. 
INOP_ApplicationError 
Value Parameter Mnemonic 
dec hex 
 
InvokeID AINPN_InvokeID 1 0x1 M 
ApplicationErrorString M 
ErrorCause AINPN_ErrorCause 556 0x22c M2 
FailedMessage O 
opCode AINPN_OperationCode 2 0x2 M2 
parameter AINPN_Parameter 555 0x22b O2 
invParams  AINPN_InvParms 557 0x22d O2 
UserID O 
Dn AINPN_Dn 26 0x1a C2 
BRI C2 
Spid AINPN_Spid 25 0x19 M3 
Dn AINPN_Dn 26 0x1a M3 
TrunkGroupID AINPN_TrunkGroupId 27 0x1b C2 
PrivateFacilityGID AINPN_PrivateFacilityGID 28 0x1c C2 
ADSIcpeID AINPN_ADSIcpeID 29 0x1d C2 
Ssp AINPN_Ssp 30 0x1e C2 
DiallingPlan AINPN_DiallingPlan 31 0x1f C2 
ExtensionParameter O 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
257 
B.14 Operation Extensions 
Where permitted by the specification, the user is able to include extensions to 
the normal operation definitions. These extensions can be sent and received 
using the functional API.  Extensions are not used by AIN. 
B.14.1 Extension Format 
Extension Support 
Value Parameter Mnemonic 
dec hex 
 
Extensions (SEQUENCE, n = 0 to 15)  O 
RequestedInformationType INPN_Extension_Type(n) 
n=0 to 15 
560 to 
575 0x230 to 0x23f M, C 
RequestedInformationType INPN_Extension_Type_ObjId(n) 
n=0 to 15 
898 to 
913 0x382 to 0x391 M, C 
Criticality 
Default = ignore(0) 
INPN_Extension_Criticality(n) 
n=0 to 15 
576 to 
592 0x240 to 0x24f D 
Extension_Field INPN_Extension_Field_PrimData(n)  
n=0 to 15 
593 to 
608 0x250 to 0x25f C,A 
Extension_Field INPN_Extension_Field_ ConstData (n)  
n=0 to 15 
609 to 
624 0x260 to 0x26f C,A 
When formatting or recovering extension types, integer tags are usually used. 
INPN_Extension_Type_parameters should be used in those cases.  
In some cases, an objectIdentifier tag may be used as an alternative to the 
integer tag when formatting or recovering extension types. 
INPN_Extension_Type_ObjId  parameter should then be used. 
Extension Support 2 is used exclusively by CAP V3 in the ApplyCharging 
operation.  Apart from the parameter values, the operation is the same as 
Extension Support above. 
Extension Support 2 
Value Parameter Mnemonic 
dec hex 
 
Extensions (SEQUENCE, n = 0 to 15)  O 
RequestedInformationType INPN_Extension_Type2(n) 
n=0 to 15 
2700 to 
2715 0xa8c to 0xa9b M 
Criticality 
Default = ignore(0) 
INPN_Extension_Criticality2(n) 
n=0 to 15 
2716 to 
2731 0xa9c to 0xaab D 
Extension_Field INPN_Extension_Field_PrimData2(n)  
n=0 to 15 
2732 to 
2747 0xaac to 0xabb C, A 
Extension_Field INPN_Extension_Field_ ConstData2 (n)  
n=0 to 15 
2748 to 
2763 0xabc to 0xacb C, A 
5 Non-Primitive Interface 
258 
B.14.2 Extension Recovery 
If the extension criticality parameter is not present in the message on 
recovery, then the default value of ignore (0) will be placed into the 
INPN_Extension_Criticality(n) component parameter, where n is the number 
of the extension. 
B.14.3 Sending Extensions 
To include a single primitive extension parameter, the extension type, 
criticality and PrimData parameters should be used. The PrimData parameter 
must be coded in full ASN.1 form, with an appropriately coded tag and length 
included. The inclusion of the tag and length allows any valid extension tags 
to be used without changes to the API. For example, a parameter of length 
one with a data value {0x99} and a context specific tag 0 – the PrimData 
parameter should be encoded as {0x80, 0x01, 0x99}. 
To include a number of parameters inside a constructed parameter, use the 
extension type, criticality and ConstData parameters. The ConstData 
parameter must be in a correctly formatted ASN.1 form. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
259 
B.15 Supported INAP Parameter List 
B.15.1 ITU-T, ETSI and CAMEL parameters 
The following table alphabetically lists the parameters used in the supported 
operations, results, errors and rejects. These cover the ITU-T, ETSI and 
CAMEL specifications. The parameter names used for AIN operation are listed 
separately in Appendix B.15.2 AIN parameters on page 278. 
Parameter Value 
(dec) 
Notes 
INPN_Abandon_Ellipsis                   1408 Note 3 (see page 278) 
INPN_AbandonCause                       860              
INPN_AccessPtName                       592              
INPN_AccountNumber                      1291              
INPN_AChBillingChargingCharacteristics  52              
INPN_ActionIndicator                    947              
INPN_ActionPerformed                    948              
INPN_Actions                            1290              
INPN_Active                             636              
INPN_ActiveSupplementaryServices        1282              
INPN_AdditionalCallingPartyNumber       21              
INPN_AgeOfLocationInformation           124              
INPN_Agreements(n)                      668-683 Note 2 (see page 277) 
INPN_AlertingPattern                    30              
INPN_AllAnnouncementsComplete 4190  
INPN_AllCallSeg_Ellipsis                1413 Note 3 (see page 278) 
INPN_AllowCdINNoPresentInd              721              
INPN_Amount                             1245              
INPN_AnsSpecInfo_Ellipsis               1410 Note 3 (see page 278)  
INPN_AnsweredCall(n)                    1228-1243 Note 2 (see page 277) 
INPN_Aocrg                              811              
INPN_AppendFreeFormData                 637              
INPN_ApplicationContextString           49              
INPN_ApplicationTimer(n)                176-191 Note 2 (see page 277) 
INPN_AssCallSeg_Ellipsis                1412 Note 3 (see page 278) 
INPN_AssistingSSPIPRoutingAddress       102              
INPN_AssRelReqSpecInfo                  706              
INPN_AssRelReqSpecInfo_Ellipsis         1405 Note 3 (see page 278) 
INPN_AssumedIdle                        134              
5 Non-Primitive Interface 
260 
Parameter Value 
(dec) 
Notes 
INPN_AttributeCertificationPath         1301              
INPN_Attributes                         66              
INPN_AudibleIndicTone 4214  
INPN_AutomaticRearm(n) 4006-4020 Note 2 (see page 277) 
INPN_BackwardGVNS                       723              
INPN_BackwardServIntInd_Ellipsis        1403 Note 3 (see page 278) 
INPN_BCSMCause 4208  
INPN_BCSMEvent_Ellipsis(n)              1335-1350 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_BCSMEventCorrelationID             24              
INPN_BCSMEventEllipsis(n) 4021-4036 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_BCSMFailure_Ellipsis               946 Note 3 (see page 278) 
INPN_BCUSMEvent_Ellipsis(n)             1351-1366 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_BearerCap_Ellipsis                 119 Note 3 (see page 278)  
INPN_BearerCapability                   23              
INPN_BearerCapability2 2771  
INPN_Bits_BearerCapabilities            1286              
INPN_Bits_HighLayerCompatiblities       1287              
INPN_BorInterrogationRequested 2787  
INPN_BothwayThroughConnectionIndicator  111              
INPN_BurstEllipsis 4211 Note 3 (see page 278)  
INPN_burstInterval 4194  
INPN_BurstListEllipsis 4212 Note 3 (see page 278)  
INPN_BusyCause                          95              
INPN_Bw_ConferenceTreatmentInd          710              
INPN_CallActive                         638              
INPN_CallAttemptElapsedTimeValue(n)     293-297 Note 2 (see page 277) 
INPN_CallCompletionTreatmentInd         716              
INPN_CallConnectedElapsedTimeValue(n)   303-307 Note 2 (see page 277) 
INPN_CallDiversionTreatmentInd          712              
INPN_CallDuration(n)                    1196-1211 Note 2 (see page 277)     
INPN_CalledAddressValue(n)              308-312 Note 2 (see page 277) 
INPN_CalledNumber(n)                    1212-1227 Note 2 (see page 277) 
INPN_CalledPartyBCDNumber               129              
INPN_CalledPartyNumber                  5              
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
261 
Parameter Value 
(dec) 
Notes 
INPN_CalledPartyURL 4357  
INPN_CallFailure(n)                     1116-1131 Note 2 (see page 277) 
INPN_CallForwarded                      639              
INPN_CallingAddressValue                99              
INPN_CallingLineID                      106              
INPN_CallingPartyBuisnessGroupID        7              
INPN_CallingPartyBusinessGroupID        7              
INPN_CallingPartyNumber                 6              
INPN_CallingPartyNumberSMS 4188  
INPN_CallingPartyRestrictionInd         714              
INPN_CallingPartysCategory              8              
INPN_CallingPartySubaddress             9              
INPN_CallingPartyURL 4358  
INPN_CallOfferingTreatmentInd           713              
INPN_CallRecord_Ellipsis                1099 Note 3 (see page 278)  
INPN_CallReferenceNumber                131              
INPN_CallRelease(n)                     1148-1163 Note 2 (see page 277) 
INPN_CallReleasedAtTcpExp               640              
INPN_CallResult                         55              
INPN_CallSegment                        744              
INPN_CallSegmentFailure_Ellipsis 4192 Note 3 (see page 278)  
INPN_CallSegmentID                      320              
INPN_CallSegmentID_Array(n)             1004-1019 Note 2 (see page 277) 
INPN_CallSegToCancelEllipsis 4210 Note 3 (see page 278)  
INPN_CallStopTimeValue(n)               298-302 Note 2 (see page 277) 
INPN_CAMEL_AOC_AfterAnswer 4220 Note 4 (see page 278) 
INPN_CAMEL_AOC_BeforeAnswer             143              
INPN_CamelBusy                          135              
INPN_Cancel_InvokeID                    86              
INPN_CancelAllRequests 4219  
INPN_CancelDigit                        77              
INPN_CancelDigitSeq(n) 2837-2852 Note 2 (see page 277) 
INPN_CancelFailed_Operation             43              
INPN_CancelFailed_Problem               42              
INPN_Carrier                            40              
INPN_Cause                              41              
5 Non-Primitive Interface 
262 
Parameter Value 
(dec) 
Notes 
INPN_CauseOfLastCallFailure             1283              
INPN_CellGlobalId0(n) 2885-2900 Note 2 (see page 277) 
INPN_CellGlobalId1(n) 2997-3012 Note 2 (see page 277) 
INPN_CellGlobalId2(n) 3109-3124 Note 2 (see page 277) 
INPN_CellGlobalId3(n) 3221-3236 Note 2 (see page 277) 
INPN_CellGlobalId4(n) 3333-3348 Note 2 (see page 277) 
INPN_CellGlobalId5(n) 3445-3460 Note 2 (see page 277) 
INPN_CellGlobalId6(n) 3557-3572 Note 2 (see page 277) 
INPN_CellGlobalId7(n) 3669-3684 Note 2 (see page 277) 
INPN_CellGlobalId8(n) 3781-3796 Note 2 (see page 277) 
INPN_CellGlobalId9(n) 3893-3908 Note 2 (see page 277) 
INPN_CellIdFixedLength                  122              
INPN_CertificationPath                  1294              
INPN_cGEncountered                      10              
INPN_CGlobal_SArea_LAI                  641              
INPN_ChangeOfLocationEllipsis0(n) 2981-2996 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis1(n) 3093-3108 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis2(n) 3205-3220 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis3(n) 3317-3332 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis4(n) 3429-3444 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis5(n) 3541-3556 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis6(n) 3653-3668 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis7(n) 3765-3780 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis8(n) 3877-3892 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChangeOfLocationEllipsis9(n) 3989-4004 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ChargeIndicator 4182  
INPN_ChargeNumber                       642  
INPN_ChargingEvent_Ellipsis(n)          1303-1318 Note 2 (see page 277) 
Note 3 (see page 278)  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
263 
Parameter Value 
(dec) 
Notes 
INPN_ChargingID                         643              
INPN_ChargingParameters_Ellipsis        1254 Note 3 (see page 278)  
INPN_ChargingTariffInformation          932              
INPN_CldAddrServ_Ellipsis               1398 Note 3 (see page 278)  
INPN_ClgAddrServ_Ellipsis               1400 Note 3 (see page 278)  
INPN_CollectedInfo_Ellipsis 4221 Note 3 (see page 278)  
INPN_collectInformationAllowed 2785  
INPN_ComCalledAddressValue              894              
INPN_CompRecSpecInfo                    705              
INPN_ComServiceKey                      893              
INPN_ConnectedNumberTreatment           718              
INPN_ConnectTime                        103              
INPN_ContinueWithArgumentExtensionEllipsi 
s 4209 Note 3 (see page 278)  
INPN_ControlDigits_Ellipsis             558 
 
Note 3 (see page 278)  
INPN_ControlType                        101              
INPN_CorrelationID                      31              
INPN_CounterID(n)                       328-427 Note 2 (see page 277) 
INPN_CounterValue(n)                    428-527 Note 2 (see page 277) 
INPN_CreditLimitReached(n)              1180-1195 Note 2 (see page 277) 
INPN_CreditUnit                         1368              
INPN_Crgt                               810              
INPN_CSAID                              725              
INPN_CSFailure_Ellipsis                 945 Note 3 (see page 278)  
INPN_CUG_Index                          644              
INPN_CUG_Interlock                      645              
INPN_CUG_OutgoingAccess                 646              
INPN_CurLocRetrieved 4228  
INPN_CurrencyID                         1244              
INPN_CurrencyValue_Ellipsis             1246 Note 3 (see page 278)  
INPN_CutAndPaste                        32              
INPN_CWTreatmentInd                     647              
INPN_Date(n)                            543-547 Note 2 (see page 277) 
INPN_DestinationAddr                    648              
INPN_DestinationRoutingAddress(n)       27-29 Note 2 (see page 277) 
INPN_DestinationRoutingAddressURL 4354  
5 Non-Primitive Interface 
264 
Parameter Value 
(dec) 
Notes 
INPN_DestSubscriberNumber               649              
INPN_DialledDigits                      4              
INPN_DialledNumber                      105              
INPN_DigitsResponse                     47              
INPN_DisconnectFromIPForbidden          59              
INPN_DiscSpecInfo_Ellipsis              1409 Note 3 (see page 278)  
INPN_DisplayInformation                 91              
INPN_DistinguishedName                  1295              
INPN_DPAssignment                       14              
INPN_DpSpecCritAltEllipsis(n) 4233-4248 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_DTMFDigitsCompleted 4183  
INPN_DTMFDigitsTimeOut 4184  
INPN_Duration                           89              
INPN_ECTTreatmentInd                    709              
INPN_ElementaryMessageID                628              
INPN_ElementaryMessageIDs(n)            256-271 Note 2 (see page 277) 
INPN_Ellipsis                           112 Note 3 (see page 278)  
INPN_EndOfRecordingDigit                553              
INPN_EndOfReplyDigit                    76              
INPN_EndOfReplyDigitSeq(n) 2821-2836 Note 2 (see page 277) 
INPN_EnhancedDialledServicesAllowed 2784  
INPN_EnteringCellGlobalId(n) 4053-4062 Note 2 (see page 277) 
INPN_EnteringLocationAreaId(n) 4093-4102 Note 2 (see page 277) 
INPN_EnteringServiceAreaId(n) 4073-4082 Note 2 (see page 277) 
INPN_EntityReleased_Cause               944              
INPN_EntityReleased_Reason              943              
INPN_Error_Attributes                   1256              
INPN_Error_Date(n)                      1083-1087 Note 2 (see page 277) 
INPN_Error_DisplayInformation           1096              
INPN_Error_Duration                     1094              
INPN_Error_ElementaryMessageID          1258              
INPN_Error_ElementaryMessageIDs(n)      1052-1067 Note 2 (see page 277) 
INPN_Error_InfoToSend_Ellipsis          635 Note 3 (see page 278)  
INPN_Error_Integer(n)                   1068-1072 Note 2 (see page 277) 
INPN_Error_Interval                     1095              
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
265 
Parameter Value 
(dec) 
Notes 
INPN_Error_MessageContent               1255              
INPN_Error_Number(n)                    1073-1077 Note 2 (see page 277) 
INPN_Error_NumberOfRepetitions          1093              
INPN_Error_Price(n)                     1088-1092 Note 2 (see page 277) 
INPN_Error_Time(n)                      1078-1082 Note 2 (see page 277) 
INPN_Error_ToneID                       1259              
INPN_Error_Variable_MessageID           1257              
INPN_ErrorProtection                    1302              
INPN_Errortreatment                     81              
INPN_EventSpecificInformationBCUSM      727              
INPN_EventSpecificInformationCharging   58              
INPN_EventSpecificInformationTariff     707              
INPN_EventSpecInfo_Ellipsis             113 Note 3 (see page 278)  
INPN_EventSpecInfoGPRS_Ellipsis         1372 Note 3 (see page 278)  
INPN_EventSpecInfoSMS_Ellipsis          1371 Note 3 (see page 278)  
INPN_EventTypeBCSM(n)                   192-207 Note 2 (see page 277) 
INPN_EventTypeBCUSM(n)                  728-743 Note 2 (see page 277) 
INPN_EventTypeCharging(n)               272-287 Note 2 (see page 277) 
INPN_EventTypeSMS(n)                    861-876 Note 2 (see page 277) 
INPN_EventTypeTariff(n)                 794-809 Note 2 (see page 277) 
INPN_Ext_BearerServiceCode              120              
INPN_Ext_BearerServiceCode_tServChng 4180  
INPN_Ext_BearerServiceCode2 2764  
INPN_Ext_TeleserviceCode                121              
INPN_Ext_TeleserviceCode_tServChng 4181  
INPN_Ext_TeleserviceCode2 2765  
INPN_Extension_Criticality(n)           576-591 Note 2 (see page 277) 
INPN_Extension_Criticality2(n)          2716-2731 Note 2 (see page 277) 
INPN_Extension_Field_ConstData(n)       609-624 Note 2 (see page 277) 
INPN_Extension_Field_ConstData2(n)      2748-2763 Note 2 (see page 277) 
INPN_Extension_Field_PrimData(n)        593-608 Note 2 (see page 277) 
INPN_Extension_Field_PrimData2(n)       2732-2747 Note 2 (see page 277) 
INPN_Extension_Type(n)                  560-575 Note 2 (see page 277) 
INPN_Extension_Type_ObjId(n)                  898-913 Note 2 (see page 277) 
INPN_Extension_Type2(n)                 2700-2715 Note 2 (see page 277) 
INPN_ExtensionContainer                 128              
5 Non-Primitive Interface 
266 
Parameter Value 
(dec) 
Notes 
INPN_FailureCause                       94              
INPN_FCIBCC                             708              
INPN_FCIBCC_Ellipsis 4217 Note 3 (see page 278)  
INPN_FCIBCCS                            700              
INPN_FCIBCCS1                           715              
INPN_FCIBCCSeq_Ellipsis                 1399 Note 3 (see page 278)  
INPN_FCIBillingChargingCharacteristics  54              
INPN_FCIGPRSseq_Ellipsis                1367 Note 3 (see page 278)  
INPN_Filtering_Duration                 98              
INPN_FirstAnnouncementStarted 4191  
INPN_FirstDigitTimeOut                  79              
INPN_ForwardCallIndicators              22              
INPN_ForwardedCall                      651              
INPN_ForwardGVNS                        724              
INPN_ForwardingCondition                33              
INPN_forwardingDestinationNumber 4185  
INPN_ForwardingDestNumber 2776  
INPN_ForwardServIntInd_Ellipsis         1402 Note 3 (see page 278)  
INPN_FreeFormData                       319              
INPN_Fw_ConferenceTreatmentInd          711              
INPN_Gap_Duration                       72              
INPN_GapInd_Ellipsis                    1411 Note 3 (see page 278)  
INPN_GapInterval                        73              
INPN_GapOnServ_Ellipsis                 1401 Note 3 (see page 278)  
INPN_GenericName                        934              
INPN_GenericNumber(n)                   67-71 Note 2 (see page 277) 
INPN_GeodeticInformation 4229  
INPN_GeographicalInformation            125              
INPN_GGSNAddress                        652              
INPN_Global(n)                          828-843 Note 2 (see page 277) 
INPN_GMSCAddress                        653              
INPN_GPRSCause                          654              
INPN_GPRSChargingID                     655              
INPN_GPRSEventType(n)                   877-892 Note 2 (see page 277) 
INPN_GPRSExtensionContainer             896              
INPN_GPRSGeographicalInformation        895              
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
267 
Parameter Value 
(dec) 
Notes 
INPN_GPRSRoutingAreaID                  897              
INPN_GSM_ForwardingPending              133              
INPN_GsmSCFAddress 4186  
INPN_HighLayerCompatibility             19              
INPN_HighLayerCompatibility2 2781  
INPN_HoldTreatmentInd                   656              
INPN_HuntGroup                          953              
INPN_IA5Information                     955              
INPN_IA5Response                        48              
INPN_IA5String(n)                       1261-1276 Note 2 (see page 277) 
INPN_IMEI 2778  
INPN_IMSI                               130              
INPN_IMSSFAddress 4355  
INPN_InbandInfo_Ellipsis                1383 Note 3 (see page 278)  
INPN_Include_NA_Info                    138              
INPN_InfoToRecord_Ellipsis              559 Note 3 (see page 278)  
INPN_InfoToSend_Ellipsis                634 Note 3 (see page 278)  
INPN_Initial_CAI_E1                     144              
INPN_Initial_CAI_E2                     145              
INPN_Initial_CAI_E3                     146              
INPN_Initial_CAI_E4                     147              
INPN_Initial_CAI_E5                     148              
INPN_Initial_CAI_E6                     149              
INPN_Initial_CAI_E7                     150              
INPN_InitialCallSegment                 745              
INPN_InitialDPArgExt_Ellipsis           117 Note 3 (see page 278)  
INPN_InitialTimeInterval                1253              
INPN_InitialUnitIncrement               1250              
INPN_InitiateIntegrity                  657              
INPN_InitiatingEntity                   942              
INPN_INServiceControlCode               701              
INPN_INServiceControlCodeHigh0(n)       1464-1479 Note 2 (see page 277) 
INPN_INServiceControlCodeHigh1(n)       1544-1559 Note 2 (see page 277) 
INPN_INServiceControlCodeHigh2(n)       1624-1639 Note 2 (see page 277) 
INPN_INServiceControlCodeHigh3(n)       1704-1719 Note 2 (see page 277) 
INPN_INServiceControlCodeLow0(n)        1448-1463 Note 2 (see page 277) 
5 Non-Primitive Interface 
268 
Parameter Value 
(dec) 
Notes 
INPN_INServiceControlCodeLow1(n)        1528-1543 Note 2 (see page 277) 
INPN_INServiceControlCodeLow2(n)        1608-1623 Note 2 (see page 277) 
INPN_INServiceControlCodeLow3(n)        1688-1703 Note 2 (see page 277) 
INPN_Integer(n)                         528-532 Note 2 (see page 277) 
INPN_InterDigitTimeOut                  80              
INPN_InterDigitTimeout(n) 2869-2884 Note 2 (see page 277) 
INPN_InterMSCHandOver(n) 4143-4152 Note 2 (see page 277) 
INPN_InterMSCHandOver0(n) 2965-2980 Note 2 (see page 277) 
INPN_InterMSCHandOver1(n) 3077-3092 Note 2 (see page 277) 
INPN_InterMSCHandOver2(n) 3189-3204 Note 2 (see page 277) 
INPN_InterMSCHandOver3(n) 3301-3316 Note 2 (see page 277) 
INPN_InterMSCHandOver4(n) 3413-3428 Note 2 (see page 277) 
INPN_InterMSCHandOver5(n) 3525-3540 Note 2 (see page 277) 
INPN_InterMSCHandOver6(n) 3637-3652 Note 2 (see page 277) 
INPN_InterMSCHandOver7(n) 3749-3764 Note 2 (see page 277) 
INPN_InterMSCHandOver8(n) 3861-3876 Note 2 (see page 277) 
INPN_InterMSCHandOver9(n) 3973-3988 Note 2 (see page 277) 
INPN_InterPLMNHandOver(n) 4133-4142 Note 2 (see page 277) 
INPN_InterPLMNHandOver0(n) 2949-2964 Note 2 (see page 277) 
INPN_InterPLMNHandOver1(n) 3061-3076 Note 2 (see page 277) 
INPN_InterPLMNHandOver2(n) 3173-3188 Note 2 (see page 277) 
INPN_InterPLMNHandOver3(n) 3285-3300 Note 2 (see page 277) 
INPN_InterPLMNHandOver4(n) 3397-3412 Note 2 (see page 277) 
INPN_InterPLMNHandOver5(n) 3509-3524 Note 2 (see page 277) 
INPN_InterPLMNHandOver6(n) 3621-3636 Note 2 (see page 277) 
INPN_InterPLMNHandOver7(n) 3733-3748 Note 2 (see page 277) 
INPN_InterPLMNHandOver8(n) 3845-3860 Note 2 (see page 277) 
INPN_InterPLMNHandOver9(n) 3957-3972 Note 2 (see page 277) 
INPN_InterruptableAnnInd                82              
INPN_InterSystemHandOver0(n) 2933-2948 Note 2 (see page 277) 
INPN_InterSystemHandOver1(n) 3045-3060 Note 2 (see page 277) 
INPN_InterSystemHandOver2(n) 3157-3172 Note 2 (see page 277) 
INPN_InterSystemHandOver3(n) 3269-3284 Note 2 (see page 277) 
INPN_InterSystemHandOver4(n) 3381-3396 Note 2 (see page 277) 
INPN_InterSystemHandOver5(n) 3493-3508 Note 2 (see page 277) 
INPN_InterSystemHandOver6(n) 3605-3620 Note 2 (see page 277) 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
269 
Parameter Value 
(dec) 
Notes 
INPN_InterSystemHandOver7(n) 3717-3732 Note 2 (see page 277) 
INPN_InterSystemHandOver8(n) 3829-3844 Note 2 (see page 277) 
INPN_InterSystemHandOver9(n) 3941-3956 Note 2 (see page 277) 
INPN_InterSystemHandOverToGSM(n) 4123-4132 Note 2 (see page 277) 
INPN_InterSystemHandOverToUMTS(n) 4113-4122 Note 2 (see page 277) 
INPN_Interval                           90              
INPN_InvokableService                   1293              
INPN_InvokedSupplementaryService        1281              
INPN_InvokeID                           1              
INPN_IPAddrCallSeg_Ellipsis             1415 Note 3 (see page 278)  
INPN_IPAddrLegID_Ellipsis               1414 Note 3 (see page 278)  
INPN_IPAvailable                        12              
INPN_IPRoutingAddress                   85              
INPN_IPSSPCapabilities                  11              
INPN_ISDNAccessRelatedInformation       34              
INPN_ISDNAddressString                  726              
INPN_LAIFixedLength                     123              
INPN_LastEventIndicator                 627              
INPN_LeavingCellGlobalId(n) 4063-4072 Note 2 (see page 277) 
INPN_LeavingLocationAreaId(n) 4103-4112 Note 2 (see page 277) 
INPN_LeavingServiceAreaId(n) 4083-4092 Note 2 (see page 277) 
INPN_LegActive 4215  
INPN_LI_LocationNumber                  127              
INPN_Linked_Op_Code                     57              
INPN_LinkedID                           2              
INPN_Local(n)                           844-859 Note 2 (see page 277)   
INPN_LocalValue                         702              
INPN_LocationAreaId0(n) 2917-2932 Note 2 (see page 277) 
INPN_LocationAreaId1(n) 3029-3044 Note 2 (see page 277) 
INPN_LocationAreaId2(n) 3141-3156 Note 2 (see page 277) 
INPN_LocationAreaId3(n) 3253-3268 Note 2 (see page 277) 
INPN_LocationAreaId4(n) 3365-3380 Note 2 (see page 277) 
INPN_LocationAreaId5(n) 3477-3492 Note 2 (see page 277) 
INPN_LocationAreaId6(n) 3589-3604 Note 2 (see page 277) 
INPN_LocationAreaId7(n) 3701-3716 Note 2 (see page 277) 
INPN_LocationAreaId8(n) 3813-3828 Note 2 (see page 277) 
5 Non-Primitive Interface 
270 
Parameter Value 
(dec) 
Notes 
INPN_LocationAreaId9(n) 3925-3940 Note 2 (see page 277) 
INPN_LocationInfo_Ellipsis              114 Note 3 (see page 278)     
INPN_LocationInfoGPRS_Ellipsis          1369 Note 3 (see page 278)        
INPN_LocationInfoGPRS_SAIPresent 4232  
INPN_LocationInfoGPRS_SelLSAIdentity 4281  
INPN_LocationInfoGPRS_SGSNNumber 4231  
INPN_LocationNumber                     13              
INPN_LowLayerCompatibility 2782  
INPN_LowLayerCompatibility2 2783  
INPN_MailBoxID                          322              
INPN_MaxCallPeriodDuration              159              
INPN_MaxElapsedTime                     658              
INPN_MaximumNumberOfCounters            93              
INPN_MaximumNumberOfDigits              75              
INPN_MaximumNumberOfDigitsSeq(n) 2805-2820 Note 2 (see page 277) 
INPN_MaxTransferredVol                  659              
INPN_MC_InterDigitTimeout(n) 4265-4280 Note 2 (see page 277) 
INPN_Media                              323              
INPN_MediaTypeInfo(n) 4359-4363 Note 2 (see page 277) 
INPN_MessageContent                     65              
INPN_MessageDeletionTimeOut             625              
INPN_MessageType                        56              
INPN_MetDPCriterion_Ellipsis(n) 4153-4162 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_MidCallCtlInfoEllipsis(n) 4249-4264 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_MidCallCtrlSeq0_Ellipsis(n)        1432-1447 Note 2 (see page 277)  
Note 3 (see page 278)  
INPN_MidCallCtrlSeq1_Ellipsis(n)        1512-1527 Note 2 (see page 277)  
Note 3 (see page 278)  
INPN_MidCallCtrlSeq2_Ellipsis(n)        1592-1607 Note 2 (see page 277)  
Note 3 (see page 278)  
INPN_MidCallCtrlSeq3_Ellipsis(n)        1672-1687 Note 2 (see page 277)  
Note 3 (see page 278)  
INPN_MidCallInfo_Ellipsis               1406 Note 3 (see page 278)       
INPN_MidCallInfoType0_Ellipsis(n)       1416-1431 Note 2 (see page 277)  
Note 3 (see page 278)  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
271 
Parameter Value 
(dec) 
Notes 
INPN_MidCallInfoType1_Ellipsis(n)       1496-1511 Note 2 (see page 277)  
Note 3 (see page 278)  
INPN_MidCallInfoType2_Ellipsis(n)       1576-1591 Note 2 (see page 277)  
Note 3 (see page 278)  
INPN_MidCallInfoType3_Ellipsis(n)       1656-1671 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_MidCallReportType0(n)              1480-1495 Note 2 (see page 277) 
INPN_MidCallReportType1(n)              1560-1575 Note 2 (see page 277) 
INPN_MidCallReportType2(n)              1640-1655 Note 2 (see page 277) 
INPN_MidCallReportType3(n)              1720-1735 Note 2 (see page 277) 
INPN_MidCallSpecInfo_Ellipsis           1407 Note 3 (see page 278)        
INPN_MinimumNumberOfDigits              74              
INPN_MinimumNumberOfDigitsSeq(n) 2789-2804 Note 2 (see page 277) 
INPN_MiscCall_Ellipsis                  1381 Note 3 (see page 278)  
INPN_MonitorMode(n)                     208-223 Note 2 (see page 277) 
INPN_MSCAddress                         132              
INPN_MSClassMark2 2777  
INPN_MSISDN                             660              
INPN_MSNetworkCapability                661              
INPN_MSRadioAccessCapability            662              
INPN_MT_SMSCause 2772  
INPN_NACarrierID                        140              
INPN_NACarrierInfo_Ellipsis             116 Note 3 (see page 278)  
INPN_NAChargeNumber                     142              
INPN_NACICSelectionType                 139              
INPN_NAInfo_Ellipsis                    115 Note 3 (see page 278)  
INPN_NAOliInfo                          141              
INPN_NegGPRSQoSExt_Ellipsis 4207 Note 3 (see page 278)  
INPN_NegLngQoSFormat                    747              
INPN_NegShtQoSFormat                    746              
INPN_NegSupToLongQoSFormat 4206  
INPN_NetDetNotReachable                 136              
INPN_NetworkSpecific(n)                 684-699 Note 2 (see page 277) 
INPN_NewCallSegment(n)                  1036-1051 Note 2 (see page 277) 
INPN_NewCallSegmentAssociation          935              
INPN_NewLeg(n)                          988-1003 Note 2 (see page 277) 
INPN_NonCUGCall                         663              
5 Non-Primitive Interface 
272 
Parameter Value 
(dec) 
Notes 
INPN_None                               650              
INPN_NoReply(n)                         1132-1147 Note 2 (see page 277) 
INPN_Notification                       1288              
INPN_NotProvidedFromVLR                 137              
INPN_Null                               0              
INPN_Number(n)                          533-537 Note 2 (see page 277) 
INPN_NumberingPlan                      107              
INPN_NumberOfAllowedRetries             1097              
INPN_numberOfBursts 4193  
INPN_NumberOfCallAttempts               1280              
INPN_NumberOfCalls                      97              
INPN_NumberOfDigits(n)                  160-175 Note 2 (see page 277) 
INPN_NumberOfRepetitions                88              
INPN_numberOfTonesInBurst 4195  
INPN_OCSIApplicable                     110              
INPN_OfferedCamel4Functionalities 2780  
INPN_oInitiatorOfServiceCharge 4224  
INPN_oNatureOfServiceCharge 4226  
INPN_OperationCode                      1300              
INPN_OrCall                             664              
INPN_OriginalCalledPartyID              15              
INPN_OriginalCalledPartyURL 4353  
INPN_oServiceChargeInfo_Ellipsis 4222 Note 3 (see page 278)  
INPN_PDPAddress                         666              
INPN_PDPID                              665              
INPN_PDPInitiationType                  667              
INPN_PDPTypeNumber                      748              
INPN_PDPTypeOrganization                749              
INPN_PreferredLanguage                  1285              
INPN_Price(n)                           548-552 Note 2 (see page 277) 
INPN_PrivateFacilityID                  952              
INPN_problem_code                       51              
INPN_provider_error                     50              
INPN_QoS_Ellipsis                       1370 Note 3 (see page 278)  
INPN_Random                             1297              
INPN_ReceivedStatus                     631              
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
273 
Parameter Value 
(dec) 
Notes 
INPN_ReceivingSideID(n)                 240-255 Note 2 (see page 277) 
INPN_Record_MessageID                   630              
INPN_RecordedMessageID                  632              
INPN_RecordedMessageUnits               633              
INPN_RedirectingPartyID                 25              
INPN_RedirectingPartyURL 4352  
INPN_RedirectionInformation             26              
INPN_RegistratorIdentifier              949              
INPN_ReleaseCause                       96              
INPN_ReleaseCauseValue(n)               313-317 Note 2 (see page 277) 
INPN_ReleaseIfDurExceeded               750              
INPN_RelIfDurEx_Ellipsis 4179 Note 3 (see page 278)  
INPN_RelIfDurExc_Ellipsis               118 Note 3 (see page 278)  
INPN_RelIfDurExc_Tone                   318              
INPN_ReplayAllowed                      557              
INPN_ReplayDigit                        554              
INPN_ReportExpected                     1278              
INPN_ReqGPRSQoSExt_Ellipsis 4203 Note 3 (see page 278)  
INPN_ReqInfo_Ellipsis(n)                1376-1380 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_ReqLngQoSFormat                    752              
INPN_ReqShtQoSFormat                    751              
INPN_ReqSupToLongQoSFormat 4202  
INPN_RequestAnnouncementComplete        60              
INPN_RequestAnnouncementStarted 4189  
INPN_RequestedInfoError                 44              
INPN_RequestedInformationType(n)        288-292 Note 2 (see page 277) 
INPN_RequestedType                      1279              
INPN_RequestedUTSI_Ellipsis(n)          1319-1334 Note 2 (see page 277) 
Note 3 (see page 278)  
INPN_Response                           1299              
INPN_ResponseCondition                  108              
INPN_RestartAllowed                     556              
INPN_RestartRecordingDigit              555              
INPN_RO_TmGPRSLastTariffSwch            757              
INPN_RO_TmGPRSNoTariffSwch              756              
INPN_RO_TmGPRSTariffSwchInt             758              
5 Non-Primitive Interface 
274 
Parameter Value 
(dec) 
Notes 
INPN_RO_VolIfNoTariffSwch               761              
INPN_RO_VolLastTariffSwch               759              
INPN_RO_VolTariffSwchInt                760              
INPN_RouteIndex                         954              
INPN_RouteList(n)                       35-37 Note 2 (see page 277) 
INPN_RouteNotPermitted                  753              
INPN_RoutingAreaID                      754              
INPN_RoutingAreaUpdate                  755              
INPN_RoutingProhibited                  1260              
INPN_RPCause                            762              
INPN_SAIPresent                         763              
INPN_ScalingFactor                      1249              
INPN_ScfID                              38              
INPN_SCIBCCAlt_Ellipsis 4218 Note 3 (see page 278)  
INPN_SCIBillingChargingCharacteristics  87              
INPN_SCIGPRSBC_Ellipsis 4201 Note 3 (see page 278)  
INPN_ScriptId_Global                    325              
INPN_ScriptId_Local                     324              
INPN_ScriptResult                       327              
INPN_ScriptSpecificInfo                 326              
INPN_SecondaryPDPContext                764              
INPN_SegmentsPerDataInterval            1252              
INPN_SelectLSAIdentity                  765              
INPN_SendCalculationToSCPIndication     53              
INPN_SendingSideID(n)                   224-239 Note 2 (see page 277) 
INPN_ServiceAreaId0(n) 2901-2916 Note 2 (see page 277) 
INPN_ServiceAreaId1(n) 3013-3028 Note 2 (see page 277) 
INPN_ServiceAreaId2(n) 3125-3140 Note 2 (see page 277) 
INPN_ServiceAreaId3(n) 3237-3252 Note 2 (see page 277) 
INPN_ServiceAreaId4(n) 3349-3364 Note 2 (see page 277) 
INPN_ServiceAreaId5(n) 3461-3476 Note 2 (see page 277) 
INPN_ServiceAreaId6(n) 3573-3588 Note 2 (see page 277) 
INPN_ServiceAreaId7(n) 3685-3700 Note 2 (see page 277) 
INPN_ServiceAreaId8(n) 3797-3812 Note 2 (see page 277) 
INPN_ServiceAreaId9(n) 3909-3924 Note 2 (see page 277) 
INPN_ServiceInteractionIndicators       20              
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
275 
Parameter Value 
(dec) 
Notes 
INPN_ServiceKey                         3              
INPN_ServiceProfileIdentifier           16              
INPN_ServIntActInd2_Ellipsis            1404 Note 3 (see page 278)  
INPN_SFBillingChargingCharacteristics   92              
INPN_SFTarrifMessage_Ellipsis           933 Note 3 (see page 278)  
INPN_SGSNCapabilities                   766              
INPN_SGSNNumber                         767              
INPN_SipCallId 4356  
INPN_SMSCAddress                        768              
INPN_SMSCause                           769              
INPN_SMSReferenceNumber                 770              
INPN_SourceCallSegment(n)               1020-1035 Note 2 (see page 277) 
INPN_SourceLeg(n)                       972-987 Note 2 (see page 277) 
INPN_SrfConnection 2786  
INPN_SS_Invocation(n)                   1164-1179 Note 2 (see page 277) 
INPN_StartDigit                         78              
INPN_StartDigitSeq(n) 2853-2868 Note 2 (see page 277) 
INPN_StartTime                          63              
INPN_StopTime                           100              
INPN_SubGPRSQoSExt_Ellipsis 4205 Note 3 (see page 278)  
INPN_SubLngQoSFormat                    772              
INPN_SubscriberID                       321              
INPN_Subsequent_CAI_E1                  151              
INPN_Subsequent_CAI_E2                  152              
INPN_Subsequent_CAI_E3                  153              
INPN_Subsequent_CAI_E4                  154              
INPN_Subsequent_CAI_E5                  155              
INPN_Subsequent_CAI_E6                  156              
INPN_Subsequent_CAI_E7                  157              
INPN_SubShtQoSFormat                    771              
INPN_SubSupToLongQoSFormat 4204  
INPN_SupplimentaryServices              1277              
INPN_SupportedCamelPhases 2779  
INPN_SuppressCallDiverNot               719              
INPN_SuppressCallTransferNot            720              
INPN_SuppressDCSI 4198  
5 Non-Primitive Interface 
276 
Parameter Value 
(dec) 
Notes 
INPN_SuppressionOfAnnouncement          109              
INPN_SuppressNCSI 2788  
INPN_SuppressOCSI 4200  
INPN_SuppressOutgoingCallBarring 4199  
INPN_SuppressTCSI 4187  
INPN_SuspendTimer                       717              
INPN_SystemFailure                      45              
INPN_Target                             1298              
INPN_TargetCallSegment                  936              
INPN_TargetCallSegmentAssociation       937              
INPN_TariffMessage                      956              
INPN_TariffSwitchInterval               158              
INPN_TaskRefused                        46              
INPN_TerminalType                       17              
INPN_Time(n)                            538-541 Note 2 (see page 277) 
INPN_TimeAndTimezone                    703              
INPN_TimePerInterval                    1248              
INPN_TimerID                            61              
INPN_TimerValue                         62              
INPN_TimeStamp                          1292              
INPN_TimeToRecord                       626              
INPN_tInitiatorOfServiceCharge 4225  
INPN_TmDurChar_Ellipsis                 1374 Note 3 (see page 278)  
INPN_TmDurCharRes_Ellipsis              1373 Note 3 (see page 278)  
INPN_TmGPRSNoTariffSwch                 773              
INPN_TmGPRSSinceLastTariffSwch          774              
INPN_TmGPRSTariffSwchInt                775              
INPN_TmIfNoTariffSwch                   776              
INPN_Tmr                                104              
INPN_TmSinceTariffSwch                  777              
INPN_tNatureOfServiceCharge 4227  
INPN_Tone                               778              
INPN_Tone_Ellipsis                      1375 Note 3 (see page 278)  
INPN_toneDuration 4196  
INPN_ToneID                             64              
INPN_toneInterval 4197  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
277 
Parameter Value 
(dec) 
Notes 
INPN_TPDataCodingScheme                 779              
INPN_TPProtocolID                       780              
INPN_TPShtMsgSubInfo                    781              
INPN_TPValidityPeriod                   782              
INPN_TravellingClassMark                39              
INPN_TriggerDataId_Ellipsis             950 Note 3 (see page 278)  
INPN_TriggerType                        18              
INPN_TrunkGroupID                       951              
INPN_tServiceChargeInfo_Ellipsis 4223 Note 3 (see page 278)  
INPN_TypeOfRequestedInfo                1098              
INPN_UniqueCallID                       1289              
INPN_UnitsPerDataInterval               1251              
INPN_UnitsPerInterval                   1247              
INPN_UserAbandon(n)                     1100-1115 Note 2 (see page 277) 
INPN_UserDialogueDuratInd               722              
INPN_UserInteractionModes               1284              
INPN_USIInformation                     704              
INPN_USIMonitorMode(n)                  812-827 Note 2 (see page 277) 
INPN_UTCTime                            1296              
INPN_UU_Ellipsis 4216 Note 3 (see page 278)  
INPN_UU_ExtensionContainer 4230  
INPN_UUI 2774  
INPN_UUIndicator 2773  
INPN_uusCFInteraction 2775  
INPN_Variable_MessageID                 629              
INPN_Vlr_Number                         126              
INPN_VoiceBack                          84              
INPN_VoiceInformation                   83              
INPN_VolIfNoTariffSwch                  785              
INPN_VolLastTariffSwch                  783              
INPN_VolTariffSwchInt                   784              
INPN_warningPeriod 4213  
 
Note 1: Parameter is a sequence of a primitive type. 
Note 2: Parameter is a primitive inside a sequence of a constructed type in at 
least one operation.          
5 Non-Primitive Interface 
278 
Note 3: Where an operation defines a sequence as ending with an ellipsis 
element, additional parameters may be included at the end of the sequence. 
The data from these additional parameters is stored in a single parameter; 
for example, INPN_Ellipsis. As the format and encoding of these parameters 
is inherently undefined in the specification, the entire parameter—including 
tag, length and data—is stored in the parameter as it appears in the message 
buffer. This allows the user to recover the largest range of additional 
parameter data without requiring custom changes to the API library. If more 
than one parameter is present in the ellipsis, the parameters are 
concatenated together in the order they appear in the message and stored in 
the same ellipsis parameter. 
Note 4: INPN_CAMEL_AOC_AfterAnswer will not be formatted or decoded, it 
is used to determine if the AOC is after the answer for CAMEL v4. If present 
AOCAfterAnswer will be sent, otherwise AOCBeforeAnswer or the AOC- 
Extension will be sent. Used in conjunction with 
INPN_CAMEL_AOC_BeforeAnswer parameter. 
B.15.2 AIN parameters  
The following table alphabetically lists the parameters used in the supported 
operations, results, errors and rejects. These cover the AIN specifications. 
The parameter names used for ITU-T, ETSI and CAMEL specifications are 
listed separately in Section B.15.1 ITU-T, ETSI and CAMEL parameters on 
page 259. 
Parameter Value (dec) Notes 
AINPN_AccessCode                   9  
AINPN_AccumulatedDigits(i)         196 - 210 Note 2 (see page 281)    
AINPN_ACGEncountered               14  
AINPN_ADSIcpeID                    29  
AINPN_AlternateBillingInd          58  
AINPN_AlternateCarrier             54  
AINPN_AlternateTrunkGroup          52  
AINPN_AMAAlternateBillingNumber    61  
AINPN_AMABillingFeature            65  
AINPN_AMABusinessCustomerID        62  
AINPN_AMADigitsDialedWC(i)         71 - 75 Note 2 (see page 281)  
AINPN_AMALineNumber(i)             69 - 70 Note 2 (see page 281)  
AINPN_AMAMeasure                   514  
AINPN_AMASequenceNumber            18  
AINPN_AMAServiceProviderID         67  
AINPN_AMAslpID                     63  
AINPN_Amp1                         15  
AINPN_AmpCallProgInd               36  
AINPN_AmpCLogName                  38  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
279 
Parameter Value (dec) Notes 
AINPN_AmpCLogRepInd                35  
AINPN_AmpCLogSeqNo                 34  
AINPN_AmpSvcProvID                 39  
AINPN_AmpTestReqInd                37  
AINPN_AnnounceElement0(i)          524 - 533 Note 2 (see page 281)     
AINPN_AnnounceElement1(i)          534 - 543 Note 2 (see page 281)  
AINPN_AnswerIndicator              517  
AINPN_ApplyRestrictions            68  
AINPN_BearerCapability             545  
AINPN_Blank(i)                     76 - 90 Note 2 (see page 281)    
AINPN_CallAppearanceID(i)          376 - 390 Note 2 (see page 281)  
AINPN_CalledAddress(i)             121 - 135 Note 2 (see page 281)  
AINPN_CalledPartyID                3  
AINPN_CalledPartyName(i)           286 - 300 Note 2 (see page 281)     
AINPN_CallingAddress(i)            241 - 255 Note 2 (see page 281)  
AINPN_CallingGeodeticLocation      23  
AINPN_CallingPartyBGID             546  
AINPN_CallingPartyID               7  
AINPN_CallingPartyName(i)          271 - 285 Note 2 (see page 281)     
AINPN_Carrier                      552  
AINPN_CarrierUsage                 66  
AINPN_Cause(i)                     136 - 150 Note 2 (see page 281)  
AINPN_ChargeNumber                 6  
AINPN_ChargePartyStationType       8  
AINPN_CollectedAddressInfo         10  
AINPN_CollectedDigits              11  
AINPN_ConnectedName(i)             331 - 345 Note 2 (see page 281)  
AINPN_ConnectedNumber(i)           466 - 480 Note 2 (see page 281)  
AINPN_Continuation(i)              106 - 120 Note 2 (see page 281)  
AINPN_CTRConnection                20  
AINPN_DateTimeOfDay(i)             361 - 375 Note 2 (see page 281)  
AINPN_DestinationAddress           512  
AINPN_DialingPlan                  31  
AINPN_DisconnectFlag               516  
AINPN_Dn                           26  
AINPN_DPConverter                  513  
AINPN_ErrorCause                   556  
5 Non-Primitive Interface 
280 
Parameter Value (dec) Notes 
AINPN_ExtendedRinging              518  
AINPN_FeatureAddress(i)            391 - 405 Note 2 (see page 281)  
AINPN_FlexParameterBlk             522  
AINPN_ForwardCallIndicators        550  
AINPN_GenericAddress(i)            40 - 44 Note 2 (see page 281)  
AINPN_GenericDigits(i)             45 - 49 Note 2 (see page 281)  
AINPN_GenericName                  551  
AINPN_Inband(i)                    226 - 240 Note 2 (see page 281)  
AINPN_InvokeID                     1  
AINPN_InvParms                     557 Note 3 (see page 282) 
AINPN_ISDNDeviceID                 33  
AINPN_JuristrictionInformation     21  
AINPN_Lata                         4  
AINPN_LinkedID                     2  
AINPN_MaximumDigits                523  
AINPN_MsrID                        554  
AINPN_NetworkSpecificFacilities    19  
AINPN_NotificationInd(i)           166 - 180 Note 2 (see page 281)   
AINPN_Null                         0  
AINPN_Ocn                          553  
AINPN_OperationCode                558  
AINPN_OrigCalledName(i)            301 - 315 Note 2 (see page 281)     
AINPN_OrigCalledNumber(i)          451 - 465 Note 2 (see page 281)  
AINPN_OriginalCalledPartyID        547  
AINPN_OrigRestrictions(i)          346 -360 Note 2 (see page 281)     
AINPN_OutpulseNumber               50  
AINPN_OverflowBillingInd           60  
AINPN_Parameter                    555  
AINPN_PartyID                      520  
AINPN_PartyOnHold                  521  
AINPN_PassiveLegTreatment          56  
AINPN_Prefix                       22  
AINPN_PrimaryBillingInd            57  
AINPN_PrimaryTrunkGroup            51  
AINPN_PrivateFacilityGID           28  
AINPN_ProgressInd(i)               151 - 165 Note 2 (see page 281)  
AINPN_Prompt(i)                    181 - 195 Note 2 (see page 281)  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
281 
Parameter Value (dec) Notes 
AINPN_Reason(i)                    256 - 270 Note 2 (see page 281)  
AINPN_RedirectingName(i)           316 - 330 Note 2 (see page 281)  
AINPN_RedirectingNumber(i)         436 - 450 Note 2 (see page 281)  
AINPN_RedirectingPartyID           548  
AINPN_RedirectingReason(i)         496 - 510 Note 2 (see page 281)  
AINPN_RedirectionInformation       549  
AINPN_RedirectionName(i)           406 - 420 Note 2 (see page 281)   
AINPN_RedirectionNumber(i)         421 – 435 Note 2 (see page 281)   
AINPN_ResourceType                 515  
AINPN_RTPReroutingNumber           511  
AINPN_Sap                          16  
AINPN_SecondAlternateBillingInd    59  
AINPN_SecondAlternateCarrier       55  
AINPN_SecondAlternateTrunkGroup    53  
AINPN_ServiceContext               64  
AINPN_Skip(i)                      91 - 105 Note 2 (see page 281)   
AINPN_SpcID                        32  
AINPN_Spid                         25  
AINPN_Ssp                          30  
AINPN_Status(i)                    211 - 225 Note 2 (see page 281)     
AINPN_STRConnection                17  
AINPN_Tcm                          13  
AINPN_Text(i)                      481 - 495 Note 2 (see page 281)   
AINPN_TriggerCritType              5  
AINPN_TriggerInformation           24  
AINPN_TrunkGroupID                 27  
AINPN_TSTRCTimer                   519  
AINPN_VerticalServiceCode          12  
Note 1: Parameter is a sequence of a primitive type. 
Note 2: Parameter is a primitive inside a sequence of a constructed type in at 
least one operation. 
5 Non-Primitive Interface 
282 
Note 3: Where an operation defines a sequence as ending with an ellipsis 
element, additional parameters may be included at the end of the sequence. 
The data from these additional parameters is stored in a single parameter 
e.g. INPN_Ellipsis. As the format and encoding of these parameters is 
inherently undefined in the specification, the entire parameter including tag, 
length and data is stored in the parameter as it appears in the message 
buffer. This allows the user to recover the largest range of additional 
parameter data without requiring custom changes to the API library. If more 
than one parameter is present in the ellipsis they are concatenated together 
in the order they appear in the message and stored in the same ellipsis 
parameter. 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
283 
B.16 Supported INAP Operation Result 
The following tables indicate those operations which have valid results and 
the parameters supported for those results.  
Note: Not all of the protocols supported include all of these operations. 
INOP_ActivateServiceFiltering 
Parameter Mnemonic Value  
(dec) Value  (hex)  
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_PromptAndCollectUserInformation 
Parameter Mnemonic Value 
(dec) Value (hex)  
InvokeID INPN_InvokeID 1 0x1 M 
DigitsResponse INPN_DigitsResponse 47 0x2f M 
 
INOP_ActivityTest 
Parameter Mnemonic Value 
(dec) Value  (hex)  
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_PromptAndReceiveMessage 
Parameter Mnemonic Value 
(dec) Value  
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
ReceivedStatus INPN_ReceivedStatus                      631 0x277 M 
RecordedMessageID INPN_RecordedMessageID 632 0x278 O 
RecordedMessageUnits INPN_RecordedMessageUnits 633 0x279 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
 
5 Non-Primitive Interface 
284 
INOP_ProvideUserInformation 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
Received Information (size = 1 to 16) M 
IA5String INPN_IA5String(n) 
(n = 0 to 15) 
1261 to 
1276 0x4ed to 0x4fc O2 
SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCode INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath INPN_AttributeCertificationPath 1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
 
INOP_ManageTriggerData 
Value Parameter Mnemonic 
dec hex 
 
InvokeID INPN_InvokeID 1 0x1 M 
ActionPerformed INPN_ActionPerformed 948 0x3b4 O 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
 
INOP_InitiateAssociation 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_ConfirmedNotificationProvided 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
285 
INOP_ConfirmedReportChargingInformation 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_CreateCallSegmentAssociation 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
NewCallSegment Association INPN_NewCallSegment Association 935 0x3a7 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
 
INOP_DisconnectLeg 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_MergeCallSegments 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_MoveCallSegments 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_MoveLeg 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_SplitLeg 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
5 Non-Primitive Interface 
286 
INOP_NetworkCapability 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
BearerCapabilities (Bitstring) INPN_Bits_BearerCapabilities 1286 0x506 O 
HighLayerCompatiblities 
(Bitstring) INPN_Bits_HighLayer Compatiblities 1287 0x507 O 
SupplimentaryServices INPN_SupplimentaryServices 1277 0x4fd O 
SecurityParameters O 
CertificationPath INPN_CertificationPath 1294 0x50e O2 
DistinguishedName INPN_DistinguishedName 1295 0x50f O2 
UTCTime INPN_UTCTime 1296 0x510 O2 
Random INPN_Random 1297 0x511 O2 
Target INPN_Target 1298 0x512 O2 
Response INPN_Response 1299 0x513 O2 
OperationCod INPN_OperationCode 1300 0x514 O2 
AttributeCertificationPath  INPN_AttributeCertificationPath  1301 0x515 O2 
ErrorProtection INPN_ErrorProtection 1302 0x516 O2 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
Ellipsis INPN_Ellipsis 112 0x70 A 
 
INOP_ActivityTestGPRS 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_ApplyChargingReportGPRS 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_EntityReleasedGPRS 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
 
INOP_EventReportGPRS 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
287 
 
AINOP_SendToResource 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
Extensions (see Appendix B.14 Operation Extensions on page 257)  O 
5 Non-Primitive Interface 
288 
B.17 Supported INAP Errors 
The following errors are currently supported to provide negative results for 
the supported operations. 
The meaning of each error is that defined in the ETSI INAP specification ETS 
300 374-1 and EN 301 140-1. Not all errors are valid for all protocols. 
The mnemonics identified below are defined in the in_inc.h header file 
accompanying the API suite. They are used in the "err_name" parameter of 
the IN_set_error() and IN_get_error() API functions. 
Note: The "provider error" error indicates an error at the INAP - TCAP level. It may not 
be sent by the User Application. It may be received in response to any operation 
invoked by the user. 
Error Mnemonic Value 
(dec) 
Value 
(hex) 
Cancelled INER_Cancelled 0 0x0 
CancelFailed INER_CancelFailed 1 0x1 
ETCFailed INER_ETCFailed 3 0x2 
ImproperCallerResponse INER_ImproperCallerResponse 4 0x4 
MissingCustomerRecord INER_MissingCustomerRecord 6 0x6 
MissingParameter INER_MissingParameter 7 0x7 
ParameterOutOfRange INER_ParameterOutOfRange 8 0x8 
RequestedInfoError INER_RequestedInfoError 10 0xa 
SystemFailure INER_SystemFailure 11 0xb 
TaskRefused INER_TaskRefused 12 0xc 
UnavailableResource INER_UnavailableResource 13 0xd 
UnexpectedComponent Sequence INER_UnexpectedComponent Sequence 14 0xe 
UnexpectedDataValue INER_UnexpectedDataValue 15 0xf 
UnexpectedParameter INER_UnexpectedParameter 16 0x10 
UnknownLegID INER_UnknownLegID 17 0x11 
UnknownResource INER_UnknownResource 18 0x12 
SCFReferral INER_SCF_Referral 21 0x15 
SCFTaskRefused                   INER_SCF_TaskRefused                   22 0x16 
ChainingRefused INER_ChainingRefused 23 0x17 
UnknownPDPID INER_UnknownPDPID 50 0x32 
ProviderError INER_provider_error 240 0xf0 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
289 
B.18 Supported INAP Error Parameters 
The parameters that may be placed in the component structure using the 
IN_set_component_param() function for each of the supported errors are 
summarized below.  
The format of the contents of each error parameter is defined in the 
appropriate protocol specification. 
The mnemonics identified below are defined in the in_inc.h header file 
accompanying the API suite. They are used in the "param_name" parameter 
of the IN_set_component_param() and IN_get_component_param() API 
functions. 
INER_CancelFailed 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
CancelFailed_Problem INPN_CancelFailed_Problem 42 0x2a M 
CancelFailed_Operation INPN_CancelFailed_Operation 43 0x2b M 
 
INER_RequestedInfoError 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
RequestedInfoError INPN_RequestedInfoError 44 0x2c M 
 
INER_SystemFailure 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
SystemFailure INPN_SystemFailure 45 0x2d M 
 
INER_TaskRefused 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
TaskRefused INPN_TaskRefused 46 0x2e M 
5 Non-Primitive Interface 
290 
 
INER_provider_error27 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
Provider Error INPN_provider_error 50 0x32 M 
 
All other errors 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
In the application error table below: 
• ErrorCause is an enumerated type to identify the error. 
• OpCode is the operation code of the failed message. 
• Parameter represents the parameter, length and contents of the received 
message 
• InvParms represents the invalid parameter, which can be any AIN 
parameter. 
AIN Application error 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
InvokeID INPN_InvokeID 1 0x1 M 
ErrorCause AINPN_ErrorCause 556 0x22c M 
FailedMessage    O 
OpCode AINPN_OperationCode 558 0x22e M2 
Parameter AINPN_Parameter 555 0x22b O2 
InvParms AINPN_InvParms 557 0x22d O2 
UserID    O 
Dn AINPN_Dn 26 0x1a C2 
BRI    C2 
Spid AINPN_Spid 25 0x19 M3 
Dn AINPN_Dn 26 0x1a M3 
TrunkGroupID AINPN_TrunkGroupId 27 0x1b C2 
PrivateFacilityGID AINPN_PrivateFacilityGID 28 0x1c C2 
ADSIcpeID AINPN_ADSIcpeID 29 0x1d C2 
                                                 
27 
 The "Provider Error" error indicates an error in the INAP - TCAP layers. The contents of the associated Provider Error 
parameter are specified in Section 3.9 INAP Service Primitive Parameters on page 29.  
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
291 
AIN Application error 
Parameter Mnemonic Value 
(dec) 
Value 
(hex) 
 
Ssp AINPN_Ssp 30 0x1e C2 
DialingPlan AINPN_DialingPlan 31 0x1f C2 
Key 
M Mandatory The message will be discarded if the corresponding parameter is omitted 
O Optional The parameter is not essential 
 
5 Non-Primitive Interface 
292 
 
Dialogic® SS7 Protocols INAP Programmer's Manual Issue 12 
293 
Appendix C. Message Type Reference 
C.1 Message Type Reference 
The following table lists by message type all the messages described in this 
manual. 
Value Mnemonic Description 
0x0003 MGT_MSG_TRACE_EV Message used to report traced messages 
0x0008 MGT_MSG_EVENT_IND Message used to report internal management 
events 
0x07f8 INAP_MSG_ERROR_IND Message indicates an implementation specific 
software event to the local management module 
0x07f9 INAP_MSG_MAINT_IND Message used by INAP to indicate a protocol 
related event to the local maintenance module 
0x07fa INAP_MSG_EVENT_IND  
0x07ff INAP_MSG_DEBUG_IND  
0x17fb  Confirmation to INAP_MSG_TRACE_MASK 
(0x57fb) 
0x17fc  Confirmation to INAP_MSG_S_ERROR_MASK 
(0x57fc) 
0x17fd  Confirmation to INAP_MSG_S_MAINT_MASK 
(0x57fc) 
0x2111  Confirmation to GEN_MSG_MOD_IDENT (0x6111) 
0x37f4  Confirmation to INAP_MSG_CONFIG (0x77f4) 
0x37f5  Confirmation to INAP_MSG_CNF_TIM (0x77f5) 
0x37f6  Confirmation to INAP_MSG_CNF_AC (0x77f6) 
0x37f7  Confirmation to INAP_MSG_CNF_FE (0x77f7) 
0x57fb INAP_MSG_TRACE_MASK INAP Trace Mask Request - Message used to 
configure INAP to trace messages sent or received 
0x57fc INAP_MSG_S_ERROR_MASK INAP Software Event Mask Request Message used 
to configure software error event tracing 
0x57fd INAP_MSG_S_MAINT_MASK INAP Maintenance Mask Request - Message used 
to configure maintenance event tracing 
0x57fe INAP_MSG_DEBUG_MASK  
0x6111 GEN_MSG_MOD_IDENT Read Revision Request - Message used to request 
the module type and software revision number 
0x77f4 INAP_MSG_CONFIG INAP Configuration Request - Message used to 
configure the INAP module for operation 
0x77f5 INAP_MSG_CNF_TIM INAP Timer Configuration Request - Message used 
to set up default protocol timers for use by the INAP 
module 
0x77f6 INAP_MSG_CNF_AC INAP Application Context Configuration Request - 
Message used to set up the internal Application 
Context records 
5 Non-Primitive Interface 
294 
Value Mnemonic Description 
0x77f7 INAP_MSG_CNF_FE INAP Functional Entity Configuration Request - 
Message used to set up the internal Functional 
Entity records 
0x77f8 INAP_MSG_NC_CONFIG  
0x87f0 - Confirmation to INAP-SERVICE-REQ (0xc7f0) 
0x87f1 INAP-SERVICE-IND INAP Service Indication Message - Used to receive 
operation invokes, results or errors.  
0x87f2 - Confirmation to INAP-DIALOGUE-REQ (0xc7f2) 
0x87f3 INAP-DIALOGUE-IND INAP DialogueIndication Message - Used to receive 
dialogue events from the INAP module. 
0xc002 TM_EXP INAP module periodic “tick timer” message 
0xc7f0 INAP-SERVICE-REQ INAP Service Request Message - Used to send 
components to remote Functional Entities. 
0xc7f2 INAP-DIALOGUE-REQ INAP Dialogue Request Message - Used to issue 
dialogue commands to the INAP module. 
Note: For more information on the MSG message structure, see Appendix A of the 
Software Environment Programmer’s Manual.