IoT-Spot : Recording Gyro Sensor Data using Arduino

[prathimacode-hub]

Description

Welcome to 'IoT-Spot', good to see you here.

With this issue, the readers will get to know on how to record gyro sensor data using Arduino

Sub Repo : Arduino Scripts

To get assigned to this issue, add your tool/application you would like to choose. the programming language and the approach you would follow.

Points to Note :

• The issues will be assigned on a first come first serve basis, 1 Issue == 1 PR.

• "Issue Title" and "PR Title" should be the same. Include issue number in PR template along with it.

• You should add up in respective folder according to the demands of the issue.

• Inclusion of Screenshot and Simulation is must. Block Diagram is Optional.

• README should be concise and elaborate with detailed information on the process.

This issue is only for 'GSSOC' contributors

Domain

Internet Of Things

Code of Conduct

• I will follow Contributing Guidelines & Code of conduct of this project.

All the best. Enjoy your open source journey ahead. 😎

[SarthakSKumar]

By recording data, is it graphically plotting the data? or just storing the raw data? @prathimacode-hub

[rk18venom]

@prathimacode-hub mam, Please assigned me this issue, I will use wire communication, c++ language. Arduino Uno R3 for getting the data from the gyroscope. After getting the g-value in three directions x,y,z. I will also calculate the net g-force and print it on the screen.

[prathimacode-hub]

Issue assigned. @rk18venom

[prathimacode-hub]

Issue assigned. @rk18venom

[prathimacode-hub]

Is this issue done? @rk18venom

[rk18venom]

No mam, because right now I am in my college NIT Durgapur and the internet connection of hostel is very bad so it is very difficult for me to download proteus for circuit simulation at this present situation so I am waiting for the opening of the library as the library get opened I will do the pr for it.

[prathimacode-hub]

Ok, let me know when things are fine and you started working. @rk18venom

[rk18venom]

Ok, let me know when things are fine and you started working. @rk18venom

Mam, I think till tomorrow I will be able to create the pr for this issue.

[prathimacode-hub]

Update Progress? Today is the last date for GSSoC. @rk18venom