First of two designs for a MiniDexed IO module #335
Replies: 4 comments 11 replies
-
|
And here are the notes for the slightly larger version that has all IO (apart from the PI's USB, etc) at the back. https://diyelectromusic.wordpress.com/2022/08/16/minidexed-raspberry-pi-io-board-part-3/ This one supports the original 16x2 display and has three MIDI ports (IN, OUT, THRU), although there are options to drop that down to two. All the same provisos re my competency at pcb design apply! :)
|
Beta Was this translation helpful? Give feedback.
-
|
Ping me an email if you'd like one... (although I know you've already got a few nice units built of your own!) |
Beta Was this translation helpful? Give feedback.
-
|
These PCBs look amazing. Can't wait to populate them 👍 |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much! I made the second version with the 3 midi ports. It works great, however I have a small issue which I can't fix. During boot the LCD displayes a bit of garbage. I think it should show "Loading" or something like that, but I see garbage. Once everything is loaded it works fine and the display is just fine. So just during boot I see some messy characters on the screen. Anyone knows what's causing this? Also wondering if anyone made a nice 3D printed case for the version with the 3 midi connectors. If anyone is interested, I have a few pcb's left (had to order 5 minimum). |
Beta Was this translation helpful? Give feedback.
-
|
hi there, im very interested in the pcb. kind regards, |
Beta Was this translation helpful? Give feedback.
-
|
im working on a 3d model....if i have the model i'll let you know... |
Beta Was this translation helpful? Give feedback.
-
|
Very neat work. Don't suppose you have a spare PCB? I'm currently designing a case, and I think your big design would be a perfect fit! |
Beta Was this translation helpful? Give feedback.
-
Drop me an email [email protected] and we can negotiate! :) |
Beta Was this translation helpful? Give feedback.
-
|
Will do! :) |
Beta Was this translation helpful? Give feedback.
-
@pinkmouse101 did that enclosure work out? If so, would you mind sharing the 3D print file? |
Beta Was this translation helpful? Give feedback.
-
|
I thought I had! Will put it somewhere public when I get home from work |
Beta Was this translation helpful? Give feedback.
-
|
Oops, got confused with github projects, I ended up making a module for a PI one to fit a couple along with other stuff in a 1u rack case: I'll gladly share the files if they're any use to you. |
Beta Was this translation helpful? Give feedback.
-
|
If anyone is searching, I have some spares of the version one build as pictured here:
That's the 2011 pi https://diyelectromusic.wordpress.com/2023/02/28/minidexed-raspberry-pi-v1-io-board-part-2/ |
Beta Was this translation helpful? Give feedback.
-
|
Okay great! Looking forward to your 3D design.
Where in the world do you live? I can sent you a pcb, but it could be expensive if you live on the other side of the planet.
…________________________________
Van: johndoe201274 ***@***.***>
Verzonden: maandag 23 december 2024 12:41
Aan: probonopd/MiniDexed ***@***.***>
CC: mbwum73 ***@***.***>; Comment ***@***.***>
Onderwerp: Re: [probonopd/MiniDexed] First of two designs for a MiniDexed IO module (Discussion #335)
im working on a 3d model....if i have the model i'll let you know...
—
Reply to this email directly, view it on GitHub<#335 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AFRILVIW5ET6RJUCYLMTNCT2G7ZG5AVCNFSM6AAAAABTK55KNGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNRUHE2DMOA>.
You are receiving this because you commented.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I've now received, built and tested one of my pcb designs for an IO module for MiniDexed. I quite like this one as it only needs power, audio and MIDI and then it is ready to go. I have another one to write up shortly (and I'll post again here when its done) that is a bigger board, but has all the IO off to the back and side, so might be more "mountable" e.g. in a case.
This one supports: SSD1306 128x32 OLED display, PCM5102 DAC, MIDI IN, rotary encoder and two buttons.
Note: If you are interested in following along with this one, note that I'm still quite a novice when it comes to pcb design. Also note that the MIDI IN design borrows heavily from Clumsy MIDI (which I use with my MT-32 Pi and can highly recommend too).
My build and design notes can be found here: https://diyelectromusic.wordpress.com/2022/08/16/minidexed-raspberry-pi-io-board-part-2/
Kevin
Beta Was this translation helpful? Give feedback.
All reactions