You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I added my PLM modem to my HA instance in attempts to eliminate my ISY device. While I was successful at adding my insteon switches to HA, they would respond very slowly or not at all. Typically, they would respond normally once or twice, and then just stop, or there would be long delays before a device would respond. Sometimes the delay is 20-30 seconds, other times a couple minutes, or not at all. Occasionally, a device will respond normally for several commands in a row, but inevitably it stops responding or takes an extremely long time to respond.
I reset my PLM and my Insteon switches with hopes that would clean things up. I have only added a single insteon dimmer switch and the same behavior as before. The rest of the Insteon dimmers I have are all offline (pulled the tab out to cut power to them). The PLM only knows of the single dimmer and the dimmer only knows of the PLM.
I'm not sure where to go from here. I've tried different USB ports, rebooted, removed the integration, added it back, etc. Attached are some log extracts that hopefully help. Any recommendations or guidance would be greatly appreciated!
FYI - HA version information:
System Information
version
core-2024.6.4
installation_type
Home Assistant OS
dev
false
hassio
true
docker
true
user
root
virtualenv
false
python_version
3.12.2
os_name
Linux
os_version
6.6.33-haos
arch
x86_64
timezone
America/New_York
config_dir
/config
Home Assistant Community Store
GitHub API
ok
GitHub Content
ok
GitHub Web
ok
GitHub API Calls Remaining
5000
Installed Version
1.34.0
Stage
running
Available Repositories
1385
Downloaded Repositories
11
Home Assistant Cloud
logged_in
true
subscription_expiration
redacted
relayer_connected
true
relayer_region
redacted
remote_enabled
true
remote_connected
true
alexa_enabled
true
google_enabled
false
remote_server
redacted
certificate_status
ready
instance_id
redacted
can_reach_cert_server
ok
can_reach_cloud_auth
ok
can_reach_cloud
ok
Home Assistant Supervisor
host_os
Home Assistant OS 12.4
update_channel
stable
supervisor_version
supervisor-2024.06.2
agent_version
1.6.0
docker_version
26.1.4
disk_total
109.3 GB
disk_used
8.5 GB
healthy
true
supported
true
host_connectivity
true
supervisor_connectivity
true
ntp_synchronized
true
virtualization
board
generic-x86-64
supervisor_api
ok
version_api
ok
installed_addons
Studio Code Server (5.15.0), UniFi Network Application (3.1.0), Advanced SSH & Web Terminal (18.0.0)
I added my PLM modem to my HA instance in attempts to eliminate my ISY device. While I was successful at adding my insteon switches to HA, they would respond very slowly or not at all. Typically, they would respond normally once or twice, and then just stop, or there would be long delays before a device would respond. Sometimes the delay is 20-30 seconds, other times a couple minutes, or not at all. Occasionally, a device will respond normally for several commands in a row, but inevitably it stops responding or takes an extremely long time to respond.
I reset my PLM and my Insteon switches with hopes that would clean things up. I have only added a single insteon dimmer switch and the same behavior as before. The rest of the Insteon dimmers I have are all offline (pulled the tab out to cut power to them). The PLM only knows of the single dimmer and the dimmer only knows of the PLM.
I'm not sure where to go from here. I've tried different USB ports, rebooted, removed the integration, added it back, etc. Attached are some log extracts that hopefully help. Any recommendations or guidance would be greatly appreciated!
FYI - HA version information:
System Information
Home Assistant Community Store
Home Assistant Cloud
Home Assistant Supervisor
Dashboards
Recorder
The text was updated successfully, but these errors were encountered: