draft-ietf-trans-rfc6962-bis-11.txt

Public Notary Transparency Working Group                       B. Laurie
Internet-Draft                                                A. Langley
Intended status: Standards Track                               E. Kasper
Expires: May 23, 2016                                         E. Messeri
                                                                  Google
                                                            R. Stradling
                                                                  Comodo
                                                       November 20, 2015


                        Certificate Transparency
                    draft-ietf-trans-rfc6962-bis-11

Abstract

   This document describes a protocol for publicly logging the existence
   of Transport Layer Security (TLS) certificates as they are issued or
   observed, in a manner that allows anyone to audit certification
   authority (CA) activity and notice the issuance of suspect
   certificates as well as to audit the certificate logs themselves.
   The intent is that eventually clients would refuse to honor
   certificates that do not appear in a log, effectively forcing CAs to
   add all issued certificates to the logs.

   Logs are network services that implement the protocol operations for
   submissions and queries that are defined in this document.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 23, 2016.








Laurie, et al.            Expires May 23, 2016                  [Page 1]

Internet-Draft          Certificate Transparency           November 2015


Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Requirements Language . . . . . . . . . . . . . . . . . .   5
     1.2.  Data Structures . . . . . . . . . . . . . . . . . . . . .   5
   2.  Cryptographic Components  . . . . . . . . . . . . . . . . . .   5
     2.1.  Merkle Hash Trees . . . . . . . . . . . . . . . . . . . .   5
       2.1.1.  Merkle Inclusion Proofs . . . . . . . . . . . . . . .   6
       2.1.2.  Merkle Consistency Proofs . . . . . . . . . . . . . .   7
       2.1.3.  Example . . . . . . . . . . . . . . . . . . . . . . .   8
       2.1.4.  Signatures  . . . . . . . . . . . . . . . . . . . . .   9
   3.  Submitters  . . . . . . . . . . . . . . . . . . . . . . . . .  10
     3.1.  Certificates  . . . . . . . . . . . . . . . . . . . . . .  10
     3.2.  Precertificates . . . . . . . . . . . . . . . . . . . . .  10
   4.  Private Domain Name Labels  . . . . . . . . . . . . . . . . .  11
     4.1.  Wildcard Certificates . . . . . . . . . . . . . . . . . .  11
     4.2.  Redacting Domain Name Labels in Precertificates . . . . .  11
     4.3.  Using a Name-Constrained Intermediate CA  . . . . . . . .  12
   5.  Log Format and Operation  . . . . . . . . . . . . . . . . . .  13
     5.1.  Accepting Submissions . . . . . . . . . . . . . . . . . .  14
     5.2.  Log Entries . . . . . . . . . . . . . . . . . . . . . . .  14
     5.3.  Log ID  . . . . . . . . . . . . . . . . . . . . . . . . .  15
     5.4.  The TransItem Structure . . . . . . . . . . . . . . . . .  16
     5.5.  Merkle Tree Leaves  . . . . . . . . . . . . . . . . . . .  18
     5.6.  Signed Certificate Timestamp (SCT)  . . . . . . . . . . .  19
     5.7.  Merkle Tree Head  . . . . . . . . . . . . . . . . . . . .  20
     5.8.  Signed Tree Head (STH)  . . . . . . . . . . . . . . . . .  21
     5.9.  Merkle Consistency Proofs . . . . . . . . . . . . . . . .  22
     5.10. Merkle Inclusion Proofs . . . . . . . . . . . . . . . . .  23
   6.  Log Client Messages . . . . . . . . . . . . . . . . . . . . .  23
     6.1.  Add Chain to Log  . . . . . . . . . . . . . . . . . . . .  25
     6.2.  Add PreCertChain to Log . . . . . . . . . . . . . . . . .  26
     6.3.  Retrieve Latest Signed Tree Head  . . . . . . . . . . . .  26



Laurie, et al.            Expires May 23, 2016                  [Page 2]

Internet-Draft          Certificate Transparency           November 2015


     6.4.  Retrieve Merkle Consistency Proof between Two Signed Tree
           Heads . . . . . . . . . . . . . . . . . . . . . . . . . .  26
     6.5.  Retrieve Merkle Inclusion Proof from Log by Leaf Hash . .  27
     6.6.  Retrieve Merkle Inclusion Proof, Signed Tree Head and
           Consistency Proof by Leaf Hash  . . . . . . . . . . . . .  28
     6.7.  Retrieve Entries and STH from Log . . . . . . . . . . . .  29
     6.8.  Retrieve Accepted Root Certificates . . . . . . . . . . .  31
   7.  TLS Servers . . . . . . . . . . . . . . . . . . . . . . . . .  31
     7.1.  TLS Extension . . . . . . . . . . . . . . . . . . . . . .  32
   8.  Certification Authorities . . . . . . . . . . . . . . . . . .  32
     8.1.  Transparency Information X.509v3 Extension  . . . . . . .  32
       8.1.1.  OCSP Response Extension . . . . . . . . . . . . . . .  33
       8.1.2.  Certificate Extension . . . . . . . . . . . . . . . .  33
   9.  Clients . . . . . . . . . . . . . . . . . . . . . . . . . . .  33
     9.1.  Metadata  . . . . . . . . . . . . . . . . . . . . . . . .  33
     9.2.  TLS Client  . . . . . . . . . . . . . . . . . . . . . . .  34
     9.3.  Monitor . . . . . . . . . . . . . . . . . . . . . . . . .  35
     9.4.  Auditing  . . . . . . . . . . . . . . . . . . . . . . . .  36
       9.4.1.  Verifying an inclusion proof  . . . . . . . . . . . .  37
       9.4.2.  Verifying consistency between two STHs  . . . . . . .  37
       9.4.3.  Verifying root hash given entries . . . . . . . . . .  38
   10. Algorithm Agility . . . . . . . . . . . . . . . . . . . . . .  39
   11. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  39
     11.1.  TLS Extension Type . . . . . . . . . . . . . . . . . . .  39
     11.2.  Hash Algorithms  . . . . . . . . . . . . . . . . . . . .  39
     11.3.  TransItem Extensions . . . . . . . . . . . . . . . . . .  39
     11.4.  SCT Extensions . . . . . . . . . . . . . . . . . . . . .  40
     11.5.  STH Extensions . . . . . . . . . . . . . . . . . . . . .  40
   12. Security Considerations . . . . . . . . . . . . . . . . . . .  40
     12.1.  Misissued Certificates . . . . . . . . . . . . . . . . .  41
     12.2.  Detection of Misissue  . . . . . . . . . . . . . . . . .  41
     12.3.  Redaction of Public Domain Name Labels . . . . . . . . .  41
     12.4.  Misbehaving Logs . . . . . . . . . . . . . . . . . . . .  41
     12.5.  Multiple SCTs  . . . . . . . . . . . . . . . . . . . . .  42
   13. Efficiency Considerations . . . . . . . . . . . . . . . . . .  42
   14. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  43
   15. References  . . . . . . . . . . . . . . . . . . . . . . . . .  43
     15.1.  Normative References . . . . . . . . . . . . . . . . . .  43
     15.2.  Informative References . . . . . . . . . . . . . . . . .  45
   Appendix A.  TransItemV1  . . . . . . . . . . . . . . . . . . . .  46
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  47

1.  Introduction

   Certificate transparency aims to mitigate the problem of misissued
   certificates by providing publicly auditable, append-only, untrusted
   logs of all issued certificates.  The logs are publicly auditable so
   that it is possible for anyone to verify the correctness of each log



Laurie, et al.            Expires May 23, 2016                  [Page 3]

Internet-Draft          Certificate Transparency           November 2015


   and to monitor when new certificates are added to it.  The logs do
   not themselves prevent misissue, but they ensure that interested
   parties (particularly those named in certificates) can detect such
   misissuance.  Note that this is a general mechanism, but in this
   document, we only describe its use for public TLS server certificates
   issued by public certification authorities (CAs).

   Each log consists of certificate chains, which can be submitted by
   anyone.  It is expected that public CAs will contribute all their
   newly issued certificates to one or more logs, however certificate
   holders can also contribute their own certificate chains, as can
   third parties.  In order to avoid logs being rendered useless by
   submitting large numbers of spurious certificates, it is required
   that each chain is rooted in a CA certificate accepted by the log.
   When a chain is submitted to a log, a signed timestamp is returned,
   which can later be used to provide evidence to TLS clients that the
   chain has been submitted.  TLS clients can thus require that all
   certificates they accept as valid are accompanied by signed
   timestamps.

   Those who are concerned about misissue can monitor the logs, asking
   them regularly for all new entries, and can thus check whether
   domains they are responsible for have had certificates issued that
   they did not expect.  What they do with this information,
   particularly when they find that a misissuance has happened, is
   beyond the scope of this document, but broadly speaking, they can
   invoke existing business mechanisms for dealing with misissued
   certificates, such as working with the CA to get the certificate
   revoked, or with maintainers of trust anchor lists to get the CA
   removed.  Of course, anyone who wants can monitor the logs and, if
   they believe a certificate is incorrectly issued, take action as they
   see fit.

   Similarly, those who have seen signed timestamps from a particular
   log can later demand a proof of inclusion from that log.  If the log
   is unable to provide this (or, indeed, if the corresponding
   certificate is absent from monitors' copies of that log), that is
   evidence of the incorrect operation of the log.  The checking
   operation is asynchronous to allow TLS connections to proceed without
   delay, despite network connectivity issues and the vagaries of
   firewalls.

   The append-only property of each log is technically achieved using
   Merkle Trees, which can be used to show that any particular instance
   of the log is a superset of any particular previous instance.
   Likewise, Merkle Trees avoid the need to blindly trust logs: if a log
   attempts to show different things to different people, this can be
   efficiently detected by comparing tree roots and consistency proofs.



Laurie, et al.            Expires May 23, 2016                  [Page 4]

Internet-Draft          Certificate Transparency           November 2015


   Similarly, other misbehaviors of any log (e.g., issuing signed
   timestamps for certificates they then don't log) can be efficiently
   detected and proved to the world at large.

1.1.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

1.2.  Data Structures

   Data structures are defined according to the conventions laid out in
   Section 4 of [RFC5246].

2.  Cryptographic Components

2.1.  Merkle Hash Trees

   Logs use a binary Merkle Hash Tree for efficient auditing.  The
   hashing algorithm used by each log is expected to be specified as
   part of the metadata relating to that log.  We have established a
   registry of acceptable algorithms, see Section 11.2.  The hashing
   algorithm in use is referred to as HASH throughout this document and
   the size of its output in bytes as HASH_SIZE.  The input to the
   Merkle Tree Hash is a list of data entries; these entries will be
   hashed to form the leaves of the Merkle Hash Tree.  The output is a
   single HASH_SIZE Merkle Tree Hash.  Given an ordered list of n
   inputs, D[n] = {d(0), d(1), ..., d(n-1)}, the Merkle Tree Hash (MTH)
   is thus defined as follows:

   The hash of an empty list is the hash of an empty string:

   MTH({}) = HASH().

   The hash of a list with one entry (also known as a leaf hash) is:

   MTH({d(0)}) = HASH(0x00 || d(0)).

   For n > 1, let k be the largest power of two smaller than n (i.e., k
   < n <= 2k).  The Merkle Tree Hash of an n-element list D[n] is then
   defined recursively as

   MTH(D[n]) = HASH(0x01 || MTH(D[0:k]) || MTH(D[k:n])),

   where || is concatenation and D[k1:k2] denotes the list {d(k1),
   d(k1+1),..., d(k2-1)} of length (k2 - k1).  (Note that the hash




Laurie, et al.            Expires May 23, 2016                  [Page 5]

Internet-Draft          Certificate Transparency           November 2015


   calculations for leaves and nodes differ.  This domain separation is
   required to give second preimage resistance.)

   Note that we do not require the length of the input list to be a
   power of two.  The resulting Merkle Tree may thus not be balanced;
   however, its shape is uniquely determined by the number of leaves.
   (Note: This Merkle Tree is essentially the same as the history tree
   [CrosbyWallach] proposal, except our definition handles non-full
   trees differently.)

2.1.1.  Merkle Inclusion Proofs

   A Merkle inclusion proof for a leaf in a Merkle Hash Tree is the
   shortest list of additional nodes in the Merkle Tree required to
   compute the Merkle Tree Hash for that tree.  Each node in the tree is
   either a leaf node or is computed from the two nodes immediately
   below it (i.e., towards the leaves).  At each step up the tree
   (towards the root), a node from the inclusion proof is combined with
   the node computed so far.  In other words, the inclusion proof
   consists of the list of missing nodes required to compute the nodes
   leading from a leaf to the root of the tree.  If the root computed
   from the inclusion proof matches the true root, then the inclusion
   proof proves that the leaf exists in the tree.

   Given an ordered list of n inputs to the tree, D[n] = {d(0), ...,
   d(n-1)}, the Merkle inclusion proof PATH(m, D[n]) for the (m+1)th
   input d(m), 0 <= m < n, is defined as follows:

   The proof for the single leaf in a tree with a one-element input list
   D[1] = {d(0)} is empty:

   PATH(0, {d(0)}) = {}

   For n > 1, let k be the largest power of two smaller than n.  The
   proof for the (m+1)th element d(m) in a list of n > m elements is
   then defined recursively as

   PATH(m, D[n]) = PATH(m, D[0:k]) : MTH(D[k:n]) for m < k; and

   PATH(m, D[n]) = PATH(m - k, D[k:n]) : MTH(D[0:k]) for m >= k,

   where : is concatenation of lists and D[k1:k2] denotes the length (k2
   - k1) list {d(k1), d(k1+1),..., d(k2-1)} as before.








Laurie, et al.            Expires May 23, 2016                  [Page 6]

Internet-Draft          Certificate Transparency           November 2015


2.1.2.  Merkle Consistency Proofs

   Merkle consistency proofs prove the append-only property of the tree.
   A Merkle consistency proof for a Merkle Tree Hash MTH(D[n]) and a
   previously advertised hash MTH(D[0:m]) of the first m leaves, m <= n,
   is the list of nodes in the Merkle Tree required to verify that the
   first m inputs D[0:m] are equal in both trees.  Thus, a consistency
   proof must contain a set of intermediate nodes (i.e., commitments to
   inputs) sufficient to verify MTH(D[n]), such that (a subset of) the
   same nodes can be used to verify MTH(D[0:m]).  We define an algorithm
   that outputs the (unique) minimal consistency proof.

   Given an ordered list of n inputs to the tree, D[n] = {d(0), ...,
   d(n-1)}, the Merkle consistency proof PROOF(m, D[n]) for a previous
   Merkle Tree Hash MTH(D[0:m]), 0 < m < n, is defined as:

   PROOF(m, D[n]) = SUBPROOF(m, D[n], true)

   The subproof for m = n is empty if m is the value for which PROOF was
   originally requested (meaning that the subtree Merkle Tree Hash
   MTH(D[0:m]) is known):

   SUBPROOF(m, D[m], true) = {}

   The subproof for m = n is the Merkle Tree Hash committing inputs
   D[0:m]; otherwise:

   SUBPROOF(m, D[m], false) = {MTH(D[m])}

   For m < n, let k be the largest power of two smaller than n.  The
   subproof is then defined recursively.

   If m <= k, the right subtree entries D[k:n] only exist in the current
   tree.  We prove that the left subtree entries D[0:k] are consistent
   and add a commitment to D[k:n]:

   SUBPROOF(m, D[n], b) = SUBPROOF(m, D[0:k], b) : MTH(D[k:n])

   If m > k, the left subtree entries D[0:k] are identical in both
   trees.  We prove that the right subtree entries D[k:n] are consistent
   and add a commitment to D[0:k].

   SUBPROOF(m, D[n], b) = SUBPROOF(m - k, D[k:n], false) : MTH(D[0:k])

   Here, : is a concatenation of lists, and D[k1:k2] denotes the length
   (k2 - k1) list {d(k1), d(k1+1),..., d(k2-1)} as before.





Laurie, et al.            Expires May 23, 2016                  [Page 7]

Internet-Draft          Certificate Transparency           November 2015


   The number of nodes in the resulting proof is bounded above by
   ceil(log2(n)) + 1.

2.1.3.  Example

   The binary Merkle Tree with 7 leaves:

               hash
              /    \
             /      \
            /        \
           /          \
          /            \
         k              l
        / \            / \
       /   \          /   \
      /     \        /     \
     g       h      i      j
    / \     / \    / \     |
    a b     c d    e f     d6
    | |     | |    | |
   d0 d1   d2 d3  d4 d5

   The inclusion proof for d0 is [b, h, l].

   The inclusion proof for d3 is [c, g, l].

   The inclusion proof for d4 is [f, j, k].

   The inclusion proof for d6 is [i, k].





















Laurie, et al.            Expires May 23, 2016                  [Page 8]

Internet-Draft          Certificate Transparency           November 2015


   The same tree, built incrementally in four steps:

       hash0          hash1=k
       / \              /  \
      /   \            /    \
     /     \          /      \
     g      c         g       h
    / \     |        / \     / \
    a b     d2       a b     c d
    | |              | |     | |
   d0 d1            d0 d1   d2 d3

             hash2                    hash
             /  \                    /    \
            /    \                  /      \
           /      \                /        \
          /        \              /          \
         /          \            /            \
        k            i          k              l
       / \          / \        / \            / \
      /   \         e f       /   \          /   \
     /     \        | |      /     \        /     \
    g       h      d4 d5    g       h      i      j
   / \     / \             / \     / \    / \     |
   a b     c d             a b     c d    e f     d6
   | |     | |             | |     | |    | |
   d0 d1   d2 d3           d0 d1   d2 d3  d4 d5

   The consistency proof between hash0 and hash is PROOF(3, D[7]) = [c,
   d, g, l]. c, g are used to verify hash0, and d, l are additionally
   used to show hash is consistent with hash0.

   The consistency proof between hash1 and hash is PROOF(4, D[7]) = [l].
   hash can be verified using hash1=k and l.

   The consistency proof between hash2 and hash is PROOF(6, D[7]) = [i,
   j, k]. k, i are used to verify hash2, and j is additionally used to
   show hash is consistent with hash2.

2.1.4.  Signatures

   Various data structures are signed.  A log MUST use either
   deterministic ECDSA [RFC6979] using the NIST P-256 curve
   (Section D.1.2.3 of the Digital Signature Standard [DSS]) and HMAC-
   SHA256 or RSA signatures (RSASSA-PKCS1-v1_5 with SHA-256, Section 8.2
   of [RFC3447]) using a key of at least 2048 bits.





Laurie, et al.            Expires May 23, 2016                  [Page 9]

Internet-Draft          Certificate Transparency           November 2015


3.  Submitters

   Submitters submit certificates or precertificates to logs for public
   auditing, as described below.  In order to enable attribution of each
   logged certificate or precertificate to its issuer, each submission
   MUST be accompanied by all additional certificates required to verify
   the chain up to an accepted root certificate.  The root certificate
   itself MAY be omitted from the submission.

   If a log accepts a submission, it will return a Signed Certificate
   Timestamp (SCT) (see Section 5.6).  The submitter SHOULD validate the
   returned SCT as described in Section 9.2 if they understand its
   format and they intend to use it directly in a TLS handshake or to
   construct a certificate.

3.1.  Certificates

   Anyone can submit a certificate (Section 6.1) to a log.  Since
   certificates may not be accepted by TLS clients unless logged, it is
   expected that certificate owners or their CAs will usually submit
   them.

3.2.  Precertificates

   Alternatively, (root as well as intermediate) CAs may preannounce a
   certificate prior to issuance by submitting a precertificate
   (Section 6.2) that the log can use to create an entry that will be
   valid against the issued certificate.  The CA MAY incorporate the
   returned SCT in the issued certificate.

   A precertificate is a CMS [RFC5652] "signed-data" object that
   conforms to the following requirements:

   o  It MUST be DER encoded.

   o  "SignedData.encapContentInfo.eContentType" MUST be the OID <TBD>.

   o  "SignedData.encapContentInfo.eContent" MUST contain a
      TBSCertificate [RFC5280], which MAY redact certain domain name
      labels that will be present in the issued certificate (see
      Section 4.2) and MUST NOT contain any SCTs, but which will be
      otherwise identical to the TBSCertificate in the issued
      certificate.

   o  "SignedData.signerInfos" MUST contain a signature from the same
      (root or intermediate) CA that will ultimately issue the
      certificate.  This signature indicates the CA's intent to issue
      the certificate.  This intent is considered binding (i.e.



Laurie, et al.            Expires May 23, 2016                 [Page 10]

Internet-Draft          Certificate Transparency           November 2015


      misissuance of the precertificate is considered equivalent to
      misissuance of the certificate).  (Note that, because of the
      structure of CMS, the signature on the CMS object will not be a
      valid X.509v3 signature and so cannot be used to construct a
      certificate from the precertificate).

   o  "SignedData.certificates" SHOULD be omitted.

4.  Private Domain Name Labels

   Some regard some DNS domain name labels within their registered
   domain space as private and security sensitive.  Even though these
   domains are often only accessible within the domain owner's private
   network, it's common for them to be secured using publicly trusted
   TLS server certificates.  We define a mechanism to allow these
   private labels to not appear in public logs.

4.1.  Wildcard Certificates

   A certificate containing a DNS-ID [RFC6125] of "*.example.com" could
   be used to secure the domain "topsecret.example.com", without
   revealing the string "topsecret" publicly.

   Since TLS clients only match the wildcard character to the complete
   leftmost label of the DNS domain name (see Section 6.4.3 of
   [RFC6125]), this approach would not work for a DNS-ID such as
   "top.secret.example.com".  Also, wildcard certificates are prohibited
   in some cases, such as Extended Validation Certificates
   [EVSSLGuidelines].

4.2.  Redacting Domain Name Labels in Precertificates

   When creating a precertificate, the CA MAY substitute one or more
   labels in each DNS-ID with a corresponding number of "?" labels.
   Every label to the left of a "?" label MUST also be redacted.  For
   example, if a certificate contains a DNS-ID of
   "top.secret.example.com", then the corresponding precertificate could
   contain "?.?.example.com" instead, but not "top.?.example.com"
   instead.

   Wildcard "*" labels MUST NOT be redacted.  However, if the complete
   leftmost label of a DNS-ID is "*", it is considered redacted for the
   purposes of determining if the label to the right may be redacted.
   For example, if a certificate contains a DNS-ID of
   "*.top.secret.example.com", then the corresponding precertificate
   could contain "*.?.?.example.com" instead, but not
   "?.?.?.example.com" instead.




Laurie, et al.            Expires May 23, 2016                 [Page 11]

Internet-Draft          Certificate Transparency           November 2015


   When a precertificate contains one or more redacted labels, a non-
   critical extension (OID 1.3.6.1.4.1.11129.2.4.6, whose extnValue
   OCTET STRING contains an ASN.1 SEQUENCE OF INTEGERs) MUST be added to
   the corresponding certificate: the first INTEGER indicates the total
   number of redacted labels and wildcard "*" labels in the
   precertificate's first DNS-ID; the second INTEGER does the same for
   the precertificate's second DNS-ID; etc.  There MUST NOT be more
   INTEGERs than there are DNS-IDs.  If there are fewer INTEGERs than
   there are DNS-IDs, the shortfall is made up by implicitly repeating
   the last INTEGER.  Each INTEGER MUST have a value of zero or more.
   The purpose of this extension is to enable TLS clients to accurately
   reconstruct the TBSCertificate component of the precertificate from
   the certificate without having to perform any guesswork.

   When a precertificate contains that extension and contains a CN-ID
   [RFC6125], the CN-ID MUST match the first DNS-ID and have the same
   labels redacted.  TLS clients will use the first entry in the
   SEQUENCE OF INTEGERs to reconstruct both the first DNS-ID and the CN-
   ID.

4.3.  Using a Name-Constrained Intermediate CA

   An intermediate CA certificate or intermediate CA precertificate that
   contains the critical or non-critical Name Constraints [RFC5280]
   extension MAY be logged in place of end-entity certificates issued by
   that intermediate CA, as long as all of the following conditions are
   met:

   o  there MUST be a non-critical extension (OID
      1.3.6.1.4.1.11129.2.4.7, whose extnValue OCTET STRING contains
      ASN.1 NULL data (0x05 0x00)).  This extension is an explicit
      indication that it is acceptable to not log certificates issued by
      this intermediate CA.

   o  permittedSubtrees MUST specify one or more dNSNames.

   o  excludedSubtrees MUST specify the entire IPv4 and IPv6 address
      ranges.













Laurie, et al.            Expires May 23, 2016                 [Page 12]

Internet-Draft          Certificate Transparency           November 2015


   Below is an example Name Constraints extension that meets these
   conditions:

       SEQUENCE {
         OBJECT IDENTIFIER '2 5 29 30'
         OCTET STRING, encapsulates {
           SEQUENCE {
             [0] {
               SEQUENCE {
                 [2] 'example.com'
                 }
               }
             [1] {
               SEQUENCE {
                 [7] 00 00 00 00 00 00 00 00
                 }
               SEQUENCE {
                 [7]
                   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                 }
               }
             }
           }
         }

5.  Log Format and Operation

   A log is a single, append-only Merkle Tree of submitted certificate
   and precertificate entries.

   When it receives a valid submission, the log MUST return an SCT that
   corresponds to the submitted certificate or precertificate.  If the
   log has previously seen this valid submission, it MAY return the same
   SCT as it returned before.  (Note that if a certificate was
   previously logged as a precertificate, then the precertificate's SCT
   of type "precert_sct" would not be appropriate; instead, a fresh SCT
   of type "x509_sct" should be generated).

   An SCT is the log's promise to incorporate the submitted entry in its
   Merkle Tree no later than a fixed amount of time, known as the
   Maximum Merge Delay (MMD), after the issuance of the SCT.
   Periodically, the log MUST append all its new entries to its Merkle
   Tree and sign the root of the tree.  This provides auditable evidence
   that the log kept all its promises.

   Log operators MUST NOT impose any conditions on retrieving or sharing
   data from the log.



Laurie, et al.            Expires May 23, 2016                 [Page 13]

Internet-Draft          Certificate Transparency           November 2015


5.1.  Accepting Submissions

   Logs MUST verify that each submitted certificate or precertificate
   has a valid signature chain to an accepted root certificate, using
   the chain of intermediate CA certificates provided by the submitter.
   Logs MUST accept certificates and precertificates that are fully
   valid according to RFC 5280 [RFC5280] verification rules and are
   submitted with such a chain.  Logs MAY accept certificates and
   precertificates that have expired, are not yet valid, have been
   revoked, or are otherwise not fully valid according to RFC 5280
   verification rules in order to accommodate quirks of CA certificate-
   issuing software.  However, logs MUST reject submissions without a
   valid signature chain to an accepted root certificate.  Logs MUST
   also reject precertificates that do not conform to the requirements
   in Section 3.2.

   Logs SHOULD limit the length of chain they will accept.  The maximum
   chain length is specified in the log's metadata.

   The log SHALL allow retrieval of its list of accepted root
   certificates (see Section 6.8).  This list might usefully be the
   union of root certificates trusted by major browser vendors.

5.2.  Log Entries

   If a submission is accepted and an SCT issued, the accepting log MUST
   store the entire chain used for verification.  This chain MUST
   include the certificate or precertificate itself, the zero or more
   intermediate CA certificates provided by the submitter, and the root
   certificate used to verify the chain (even if it was omitted from the
   submission).  The log MUST present this chain for auditing upon
   request (see Section 6.7).  This chain is required to prevent a CA
   from avoiding blame by logging a partial or empty chain.


















Laurie, et al.            Expires May 23, 2016                 [Page 14]

Internet-Draft          Certificate Transparency           November 2015


   Each certificate entry in a log MUST include a "X509ChainEntry"
   structure, and each precertificate entry MUST include a
   "PrecertChainEntryV2" structure:

       opaque ASN.1Cert<1..2^24-1>;

       struct {
           ASN.1Cert leaf_certificate;
           ASN.1Cert certificate_chain<0..2^24-1>;
       } X509ChainEntry;

       opaque CMSPrecert<1..2^24-1>;

       struct {
           CMSPrecert pre_certificate;
           ASN.1Cert precertificate_chain<1..2^24-1>;
       } PrecertChainEntryV2;

   "leaf_certificate" is a submitted certificate that has been accepted
   by the log.

   "certificate_chain" is a vector of 0 or more additional certificates
   required to verify "leaf_certificate".  The first certificate MUST
   certify "leaf_certificate".  Each following certificate MUST directly
   certify the one preceding it.  The final certificate MUST be a root
   certificate accepted by the log.  If "leaf_certificate" is a root
   certificate, then this vector is empty.

   "pre_certificate" is a submitted precertificate that has been
   accepted by the log.

   "precertificate_chain" is a vector of 1 or more additional
   certificates required to verify "pre_certificate".  The first
   certificate MUST certify "pre_certificate".  Each following
   certificate MUST directly certify the one preceding it.  The final
   certificate MUST be a root certificate accepted by the log.

5.3.  Log ID

   Each log's operator allocates an OID for the purpose of uniquely
   identifying that log.  This OID is specified in the log's metadata.
   Various data structures include the DER encoding of this OID,
   excluding the ASN.1 tag and length bytes, in an opaque vector:

       opaque LogID<2..127>;

   Note that the ASN.1 length and the opaque vector length are identical
   in size (1 byte) and value, so the DER encoding of the OID can be



Laurie, et al.            Expires May 23, 2016                 [Page 15]

Internet-Draft          Certificate Transparency           November 2015


   reproduced simply by prepending an OBJECT IDENTIFIER tag (0x06) to
   the opaque vector length and contents.

5.4.  The TransItem Structure















































Laurie, et al.            Expires May 23, 2016                 [Page 16]

Internet-Draft          Certificate Transparency           November 2015


   Various data structures produced by logs are encapsulated in the
   "TransItem" structure to ensure that the type and version of each one
   is identified in a common fashion:

       enum {
           v1(0), v2(1), (255)
       } Version;

       enum {
           x509_entry(0), precert_entry(1), x509_sct(2), precert_sct(3),
           tree_head(4), signed_tree_head(5), consistency_proof(6),
           inclusion_proof(7), (65535)
       } TransType;

       enum {
           reserved(65535)
       } ItemExtensionType;

       struct {
           ItemExtensionType item_extension_type;
           opaque item_extension_data<0..2^16-1>;
       } ItemExtension;

       struct {
           TransType type;
           select (type) {
               case x509_entry: TimestampedCertificateEntryDataV2;
               case precert_entry: TimestampedCertificateEntryDataV2;
               case x509_sct: SignedCertificateTimestampDataV2;
               case precert_sct: SignedCertificateTimestampDataV2;
               case tree_head: TreeHeadDataV2;
               case signed_tree_head: SignedTreeHeadDataV2;
               case consistency_proof: ConsistencyProofDataV2;
               case inclusion_proof: InclusionProofDataV2;
           } data;
           ItemExtension item_extensions<0..2^16-1>;
       } TransItemV2;

       struct {
           Version version;
           select (version) {
               case v1: TransItemV1;
               case v2: TransItemV2;
           }
       } TransItem;

   "version" is the earliest version of this protocol to which the
   encapsulated data structure conforms.  This document is v2.  Note



Laurie, et al.            Expires May 23, 2016                 [Page 17]

Internet-Draft          Certificate Transparency           November 2015


   that v1 [RFC6962] did not define "TransItem", but this document
   specifies a mechanism (see Appendix A) for v2 implementations to
   encapsulate existing v1 objects in the "TransItem" structure.  Note
   also that, since each "TransItem" object is individually versioned,
   future revisions to this protocol could conceivably update some
   encapsulated data structures without having to update all of them.

   "type" is the type of the encapsulated data structure.  (Note that
   "TransType" combines the v1 type enumerations "LogEntryType",
   "SignatureType" and "MerkleLeafType").  Future revisions of this
   protocol may add new "TransType" values.

   "data" is the encapsulated data structure.  The various structures
   named with the "DataV2" suffix are defined in later sections of this
   document.

   "item_extension_type" identifies a single extension from the IANA
   registry in Section 11.3.

   The interpretation of the "item_extension_data" field is determined
   solely by the value of the "item_extension_type" field.  Each
   document that registers a new "item_extension_type" must describe how
   to interpret the corresponding "item_extension_data".

   "item_extensions" is a vector of 0 or more item extensions.  This
   vector MUST NOT include more than one extension with the same
   "item_extension_type".  The extensions in the vector MUST be ordered
   by the value of the "item_extension_type" field, smallest value
   first.

5.5.  Merkle Tree Leaves

   The leaves of a log's Merkle Tree correspond to the log's entries
   (see Section 5.2).  Each leaf is the leaf hash (Section 2.1) of a
   "TransItem" structure of type "x509_entry" or "precert_entry", which
   in this version (v2) encapsulates a
   "TimestampedCertificateEntryDataV2" structure.  Note that leaf hashes
   are calculated as HASH(0x00 || TransItem), where the hashing
   algorithm is specified in the log's metadata.

       opaque TBSCertificate<1..2^24-1>;

       struct {
           uint64 timestamp;
           opaque issuer_key_hash[HASH_SIZE];
           TBSCertificate tbs_certificate;
           SctExtension sct_extensions<0..2^16-1>;
       } TimestampedCertificateEntryDataV2;



Laurie, et al.            Expires May 23, 2016                 [Page 18]

Internet-Draft          Certificate Transparency           November 2015


   "timestamp" is the NTP Time [RFC5905] at which the certificate or
   precertificate was accepted by the log, measured in milliseconds
   since the epoch (January 1, 1970, 00:00), ignoring leap seconds.

   "issuer_key_hash" is the HASH of the public key of the CA that issued
   the certificate or precertificate, calculated over the DER encoding
   of the key represented as SubjectPublicKeyInfo [RFC5280].  This is
   needed to bind the CA to the certificate or precertificate, making it
   impossible for the corresponding SCT to be valid for any other
   certificate or precertificate whose TBSCertificate matches
   "tbs_certificate".

   "tbs_certificate" is the DER encoded TBSCertificate from either the
   "leaf_certificate" (in the case of an "X509ChainEntry") or the
   "pre_certificate" (in the case of a "PrecertChainEntryV2").  (Note
   that a precertificate's TBSCertificate can be reconstructed from the
   issued certificate's TBSCertificate by redacting the domain name
   labels indicated by the redacted labels extension, and deleting the
   SCT list extension and redacted labels extension).

   "sct_extensions" matches the SCT extensions of the corresponding SCT.

5.6.  Signed Certificate Timestamp (SCT)

   An SCT is a "TransItem" structure of type "x509_sct" or
   "precert_sct", which in this version (v2) encapsulates a
   "SignedCertificateTimestampDataV2" structure:

       enum {
           reserved(65535)
       } SctExtensionType;

       struct {
           SctExtensionType sct_extension_type;
           opaque sct_extension_data<0..2^16-1>;
       } SctExtension;

       struct {
           LogID log_id;
           uint64 timestamp;
           SctExtension sct_extensions<0..2^16-1>;
           digitally-signed struct {
               TransItem timestamped_entry;
           } signature;
       } SignedCertificateTimestampDataV2;

   "log_id" is this log's unique ID, encoded in an opaque vector as
   described in Section 5.3.



Laurie, et al.            Expires May 23, 2016                 [Page 19]

Internet-Draft          Certificate Transparency           November 2015


   "timestamp" is equal to the timestamp from the
   "TimestampedCertificateEntryDataV2" structure encapsulated in the
   "timestamped_entry".

   "sct_extension_type" identifies a single extension from the IANA
   registry in Section 11.4.  At the time of writing, no extensions are
   specified.

   The interpretation of the "sct_extension_data" field is determined
   solely by the value of the "sct_extension_type" field.  Each document
   that registers a new "sct_extension_type" must describe how to
   interpret the corresponding "sct_extension_data".

   "sct_extensions" is a vector of 0 or more SCT extensions.  This
   vector MUST NOT include more than one extension with the same
   "sct_extension_type".  The extensions in the vector MUST be ordered
   by the value of the "sct_extension_type" field, smallest value first.
   If an implementation sees an extension that it does not understand,
   it SHOULD ignore that extension.  Furthermore, an implementation MAY
   choose to ignore any extension(s) that it does understand.

   The encoding of the digitally-signed element is defined in [RFC5246].

   "timestamped_entry" is a "TransItem" structure that MUST be of type
   "x509_entry" or "precert_entry" (see Section 5.5) and MUST have an
   empty "item_extensions" vector.

5.7.  Merkle Tree Head

   The log stores information about its Merkle Tree in a "TransItem"
   structure of type "tree_head", which in this version (v2)
   encapsulates a "TreeHeadDataV2" structure:

       opaque NodeHash[HASH_SIZE];

       struct {
           uint64 timestamp;
           uint64 tree_size;
           NodeHash root_hash;
           SthExtension sth_extensions<0..2^16-1>;
       } TreeHeadDataV2;

   "timestamp" is the current NTP Time [RFC5905], measured in
   milliseconds since the epoch (January 1, 1970, 00:00), ignoring leap
   seconds.

   "tree_size" is the number of entries currently in the log's Merkle
   Tree.



Laurie, et al.            Expires May 23, 2016                 [Page 20]

Internet-Draft          Certificate Transparency           November 2015


   "root_hash" is the root of the Merkle Hash Tree.

   "sth_extensions" matches the STH extensions of the corresponding STH.

5.8.  Signed Tree Head (STH)

   Periodically each log SHOULD sign its current tree head information
   (see Section 5.7) to produce an STH.  When a client requests a log's
   latest STH (see Section 6.3), the log MUST return an STH that is no
   older than the log's MMD.  However, STHs could be used to mark
   individual clients (by producing a new one for each query), so logs
   MUST NOT produce them more frequently than is declared in their
   metadata.  In general, there is no need to produce a new STH unless
   there are new entries in the log; however, in the unlikely event that
   it receives no new submissions during an MMD period, the log SHALL
   sign the same Merkle Tree Hash with a fresh timestamp.

   An STH is a "TransItem" structure of type "signed_tree_head", which
   in this version (v2) encapsulates a "SignedTreeHeadDataV2" structure:

       enum {
           reserved(65535)
       } SthExtensionType;

       struct {
           SthExtensionType sth_extension_type;
           opaque sth_extension_data<0..2^16-1>;
       } SthExtension;

       struct {
           LogID log_id;
           uint64 timestamp;
           uint64 tree_size;
           NodeHash root_hash;
           SthExtension sth_extensions<0..2^16-1>;
           digitally-signed struct {
               TransItem merkle_tree_head;
           } signature;
       } SignedTreeHeadDataV2;

   "log_id" is this log's unique ID, encoded in an opaque vector as
   described in Section 5.3.

   "timestamp" is equal to the timestamp from the "TreeHeadDataV2"
   structure encapsulated in "merkle_tree_head".  This timestamp MUST be
   at least as recent as the most recent SCT timestamp in the tree.
   Each subsequent timestamp MUST be more recent than the timestamp of
   the previous update.



Laurie, et al.            Expires May 23, 2016                 [Page 21]

Internet-Draft          Certificate Transparency           November 2015


   "tree_size" is equal to the tree size from the "TreeHeadDataV2"
   structure encapsulated in "merkle_tree_head".

   "root_hash" is equal to the root hash from the "TreeHeadDataV2"
   structure encapsulated in "merkle_tree_head".

   "sth_extension_type" identifies a single extension from the IANA
   registry in Section 11.5.  At the time of writing, no extensions are
   specified.

   The interpretation of the "sth_extension_data" field is determined
   solely by the value of the "sth_extension_type" field.  Each document
   that registers a new "sth_extension_type" must describe how to
   interpret the corresponding "sth_extension_data".

   "sth_extensions" is a vector of 0 or more STH extensions.  This
   vector MUST NOT include more than one extension with the same
   "sth_extension_type".  The extensions in the vector MUST be ordered
   by the value of the "sth_extension_type" field, smallest value first.
   If an implementation sees an extension that it does not understand,
   it SHOULD ignore that extension.  Furthermore, an implementation MAY
   choose to ignore any extension(s) that it does understand.

   "merkle_tree_head" is a "TransItem" structure that MUST be of type
   "tree_head" (see Section 5.7) and MUST have an empty
   "item_extensions" vector.

5.9.  Merkle Consistency Proofs

   To prepare a Merkle Consistency Proof for distribution to clients,
   the log produces a "TransItem" structure of type "consistency_proof",
   which in this version (v2) encapsulates a "ConsistencyProofDataV2"
   structure:

       struct {
           LogID log_id;
           uint64 tree_size_1;
           uint64 tree_size_2;
           NodeHash consistency_path<1..2^8-1>;
       } ConsistencyProofDataV2;

   "log_id" is this log's unique ID, encoded in an opaque vector as
   described in Section 5.3.

   "tree_size_1" is the size of the older tree.

   "tree_size_2" is the size of the newer tree.




Laurie, et al.            Expires May 23, 2016                 [Page 22]

Internet-Draft          Certificate Transparency           November 2015


   "consistency_path" is a vector of Merkle Tree nodes proving the
   consistency of two STHs.

5.10.  Merkle Inclusion Proofs

   To prepare a Merkle Inclusion Proof for distribution to clients, the
   log produces a "TransItem" structure of type "inclusion_proof", which
   in this version (v2) encapsulates an "InclusionProofDataV2"
   structure:

       struct {
           LogID log_id;
           uint64 tree_size;
           uint64 leaf_index;
           NodeHash inclusion_path<1..2^8-1>;
       } InclusionProofDataV2;

   "log_id" is this log's unique ID, encoded in an opaque vector as
   described in Section 5.3.

   "tree_size" is the size of the tree on which this inclusion proof is
   based.

   "leaf_index" is the 0-based index of the log entry corresponding to
   this inclusion proof.

   "inclusion_path" is a vector of Merkle Tree nodes proving the
   inclusion of the chosen certificate or precertificate.

6.  Log Client Messages

   Messages are sent as HTTPS GET or POST requests.  Parameters for
   POSTs and all responses are encoded as JavaScript Object Notation
   (JSON) objects [RFC4627].  Parameters for GETs are encoded as order-
   independent key/value URL parameters, using the "application/x-www-
   form-urlencoded" format described in the "HTML 4.01 Specification"
   [HTML401].  Binary data is base64 encoded [RFC4648] as specified in
   the individual messages.

   Note that JSON objects and URL parameters may contain fields not
   specified here.  These extra fields should be ignored.

   The <log server> prefix, which is part of the log's metadata, MAY
   include a path as well as a server name and a port.

   In practice, log servers may include multiple front-end machines.
   Since it is impractical to keep these machines in perfect sync,
   errors may occur that are caused by skew between the machines.  Where



Laurie, et al.            Expires May 23, 2016                 [Page 23]

Internet-Draft          Certificate Transparency           November 2015


   such errors are possible, the front-end will return additional
   information (as specified below) making it possible for clients to
   make progress, if progress is possible.  Front-ends MUST only serve
   data that is free of gaps (that is, for example, no front-end will
   respond with an STH unless it is also able to prove consistency from
   all log entries logged within that STH).

   For example, when a consistency proof between two STHs is requested,
   the front-end reached may not yet be aware of one or both STHs.  In
   the case where it is unaware of both, it will return the latest STH
   it is aware of.  Where it is aware of the first but not the second,
   it will return the latest STH it is aware of and a consistency proof
   from the first STH to the returned STH.  The case where it knows the
   second but not the first should not arise (see the "no gaps"
   requirement above).

   If the log is unable to process a client's request, it MUST return an
   HTTP response code of 4xx/5xx (see [RFC2616]), and, in place of the
   responses outlined in the subsections below, the body SHOULD be a
   JSON structure containing at least the following field:

   error_message:  A human-readable string describing the error which
      prevented the log from processing the request.

      In the case of a malformed request, the string SHOULD provide
      sufficient detail for the error to be rectified.

   error_code:  An error code readable by the client.  Some codes are
      generic and are detailed here.  Others are detailed in the
      individual requests.  Error codes are fixed text strings.

      not compliant  The request is not compliant with this RFC.

   e.g.  In response to a request of "/ct/v2/get-
   entries?start=100&end=99", the log would return a "400 Bad Request"
   response code with a body similar to the following:

       {
           "error_message": "'start' cannot be greater than 'end'",
           "error_code": "not compliant",
       }

   Clients SHOULD treat "500 Internal Server Error" and "503 Service
   Unavailable" responses as transient failures and MAY retry the same
   request without modification at a later date.  Note that as per
   [RFC2616], in the case of a 503 response the log MAY include a
   "Retry-After:" header in order to request a minimum time for the
   client to wait before retrying the request.



Laurie, et al.            Expires May 23, 2016                 [Page 24]

Internet-Draft          Certificate Transparency           November 2015


6.1.  Add Chain to Log

   POST https://<log server>/ct/v2/add-chain

   Inputs:

      chain:  An array of base64 encoded certificates.  The first
         element is the certificate for which the submitter desires an
         SCT; the second chains to the first and so on to the last,
         which is either an accepted root certificate or a certificate
         that chains to an accepted root certificate.

   Outputs:

      sct:  A base64 encoded "TransItem" of type "x509_sct", signed by
         this log, that corresponds to the submitted certificate.

   Error codes:

      unknown root  The root of the chain is not one accepted by the
         log.

      bad chain  The alleged chain is not actually a chain of
         certificates.

      bad certificate  One or more certificates in the chain are not
         valid (e.g. not properly encoded).

   If the version of "sct" is not v2, then a v2 client may be unable to
   verify the signature.  It MUST NOT construe this as an error.  This
   is to avoid forcing an upgrade of compliant v2 clients that do not
   use the returned SCTs.

   If a log detects bad encoding in a chain that otherwise verifies
   correctly then the log MAY still log the certificate but SHOULD NOT
   return an SCT.  It should instead return the "bad certificate" error.
   Logging the certificate is useful, because monitors (Section 9.3) can
   then detect these encoding errors, which may be accepted by some TLS
   clients.

   Note that not all certificate handling software is capable of
   detecting all encoding errors (e.g. some software will accept BER
   instead of DER encodings in certificates, or incorrect character
   encodings, even though these are technically incorrect) .







Laurie, et al.            Expires May 23, 2016                 [Page 25]

Internet-Draft          Certificate Transparency           November 2015


6.2.  Add PreCertChain to Log

   POST https://<log server>/ct/v2/add-pre-chain

   Inputs:

      precertificate:  The base64 encoded precertificate.

      chain:  An array of base64 encoded CA certificates.  The first
         element is the signer of the precertificate; the second chains
         to the first and so on to the last, which is either an accepted
         root certificate or a certificate that chains to an accepted
         root certificate.

   Outputs:

      sct:  A base64 encoded "TransItem" of type "precert_sct", signed
         by this log, that corresponds to the submitted precertificate.

   Errors are the same as in Section 6.1.

6.3.  Retrieve Latest Signed Tree Head

   GET https://<log server>/ct/v2/get-sth

   No inputs.

   Outputs:

      sth:  A base64 encoded "TransItem" of type "signed_tree_head",
         signed by this log, that is no older than the log's MMD.

6.4.  Retrieve Merkle Consistency Proof between Two Signed Tree Heads

   GET https://<log server>/ct/v2/get-sth-consistency

   Inputs:

      first:  The tree_size of the older tree, in decimal.

      second:  The tree_size of the newer tree, in decimal (optional).

      Both tree sizes must be from existing v2 STHs.  However, because
      of skew, the receiving front-end may not know one or both of the
      existing STHs.  If both are known, then only the "consistency"
      output is returned.  If the first is known but the second is not
      (or has been omitted), then the latest known STH is returned,
      along with a consistency proof between the first STH and the



Laurie, et al.            Expires May 23, 2016                 [Page 26]

Internet-Draft          Certificate Transparency           November 2015


      latest.  If neither are known, then the latest known STH is
      returned without a consistency proof.

   Outputs:

      consistency:  A base64 encoded "TransItem" of type
         "consistency_proof", whose "tree_size_1" MUST match the "first"
         input.  If the "sth" output is omitted, then "tree_size_2" MUST
         match the "second" input.

      sth:  A base64 encoded "TransItem" of type "signed_tree_head",
         signed by this log.

      Note that no signature is required for the "consistency" output as
      it is used to verify the consistency between two STHs, which are
      signed.

   Error codes:

      first unknown  "first" is before the latest known STH but is not
         from an existing STH.

      second unknown  "second" is before the latest known STH but is not
         from an existing STH.

   See Section 9.4.2 for an outline of how to use the "consistency"
   output.

6.5.  Retrieve Merkle Inclusion Proof from Log by Leaf Hash

   GET https://<log server>/ct/v2/get-proof-by-hash

   Inputs:

      hash:  A base64 encoded v1 leaf hash.

      tree_size:  The tree_size of the tree on which to base the proof,
         in decimal.

      The "hash" must be calculated as defined in Section 5.5.  The
      "tree_size" must designate an existing v2 STH.  Because of skew,
      the front-end may not know the requested STH.  In that case, it
      will return the latest STH it knows, along with an inclusion proof
      to that STH.  If the front-end knows the requested STH then only
      "inclusion" is returned.

   Outputs:




Laurie, et al.            Expires May 23, 2016                 [Page 27]

Internet-Draft          Certificate Transparency           November 2015


      inclusion:  A base64 encoded "TransItem" of type "inclusion_proof"
         whose "inclusion_path" array of Merkle Tree nodes proves the
         inclusion of the chosen certificate in the selected STH.

      sth:  A base64 encoded "TransItem" of type "signed_tree_head",
         signed by this log.

      Note that no signature is required for the "inclusion" output as
      it is used to verify inclusion in the selected STH, which is
      signed.

   Error codes:

      hash unknown  "hash" is not the hash of a known leaf (may be
         caused by skew or by a known certificate not yet merged).

      tree_size unknown  "hash" is before the latest known STH but is
         not from an existing STH.

   See Section 9.4.1 for an outline of how to use the "inclusion"
   output.

6.6.  Retrieve Merkle Inclusion Proof, Signed Tree Head and Consistency
      Proof by Leaf Hash

   GET https://<log server>/ct/v2/get-all-by-hash

   Inputs:

      hash:  A base64 encoded v1 leaf hash.

      tree_size:  The tree_size of the tree on which to base the proofs,
         in decimal.

      The "hash" must be calculated as defined in Section 5.5.  The
      "tree_size" must designate an existing v2 STH.

      Because of skew, the front-end may not know the requested STH or
      the requested hash, which leads to a number of cases.



      latest STH < requested STH  Return latest STH.

      latest STH > requested STH  Return latest STH and a consistency
         proof between it and the requested STH (see Section 6.4).

      index of requested hash < latest STH  Return "inclusion".



Laurie, et al.            Expires May 23, 2016                 [Page 28]

Internet-Draft          Certificate Transparency           November 2015


      Note that more than one case can be true, in which case the
      returned data is their concatenation.  It is also possible for
      none to be true, in which case the front-end MUST return an empty
      response.

   Outputs:

      inclusion:  A base64 encoded "TransItem" of type "inclusion_proof"
         whose "inclusion_path" array of Merkle Tree nodes proves the
         inclusion of the chosen certificate in the selected STH.

      sth:  A base64 encoded "TransItem" of type "signed_tree_head",
         signed by this log.

      consistency:  A base64 encoded "TransItem" of type
         "consistency_proof" that proves the consistency of the
         requested STH and the returned STH.

      Note that no signature is required for the "inclusion" or
      "consistency" outputs as they are used to verify inclusion in and
      consistency of STHs, which are signed.

   Errors are the same as in Section 6.5.

   See Section 9.4.1 for an outline of how to use the "inclusion"
   output, and see Section 9.4.2 for an outline of how to use the
   "consistency" output.

6.7.  Retrieve Entries and STH from Log

   GET https://<log server>/ct/v2/get-entries

   Inputs:

      start:  0-based index of first entry to retrieve, in decimal.

      end:  0-based index of last entry to retrieve, in decimal.

   Outputs:

      entries:  An array of objects, each consisting of

         leaf_input:  The base64 encoded "TransItem" structure of type
            "x509_entry" or "precert_entry" (see Section 5.5).

         log_entry:  The base64 encoded log entry (see Section 5.2).  In
            the case of an "x509_entry" entry, this is the whole




Laurie, et al.            Expires May 23, 2016                 [Page 29]

Internet-Draft          Certificate Transparency           November 2015


            "X509ChainEntry"; and in the case of a "precert_entry", this
            is the whole "PrecertChainEntryV2".

         sct:  A base64 encoded "TransItem" of type "x509_sct" or
            "precert_sct" corresponding to this log entry.  Note that
            more than one SCT may have been returned for the same entry
            - only one of those is returned in this field.  It may not
            be possible to retrieve others.

      sth:  A base64 encoded "TransItem" of type "signed_tree_head",
         signed by this log.

   Note that this message is not signed -- the "entries" data can be
   verified by constructing the Merkle Tree Hash corresponding to a
   retrieved STH.  All leaves MUST be v1 or v2.  However, a compliant v1
   client MUST NOT construe an unrecognized LogEntryType value as an
   error.  This means it may be unable to parse some entries, but note
   that each client can inspect the entries it does recognize as well as
   verify the integrity of the data by treating unrecognized leaves as
   opaque input to the tree.

   The "start" and "end" parameters SHOULD be within the range 0 <= x <
   "tree_size" as returned by "get-sth" in Section 6.3.

   The "start" parameter MUST be less than or equal to the "end"
   parameter.

   Log servers MUST honor requests where 0 <= "start" < "tree_size" and
   "end" >= "tree_size" by returning a partial response covering only
   the valid entries in the specified range. "end" >= "tree_size" could
   be caused by skew.  Note that the following restriction may also
   apply:

   Logs MAY restrict the number of entries that can be retrieved per
   "get-entries" request.  If a client requests more than the permitted
   number of entries, the log SHALL return the maximum number of entries
   permissible.  These entries SHALL be sequential beginning with the
   entry specified by "start".

   Because of skew, it is possible the log server will not have any
   entries between "start" and "end".  In this case it MUST return an
   empty "entries" array.

   In any case, the log server MUST return the latest STH it knows
   about.

   See Section 9.4.3 for an outline of how to use a complete list of
   "leaf_input" entries to verify the "root_hash".



Laurie, et al.            Expires May 23, 2016                 [Page 30]

Internet-Draft          Certificate Transparency           November 2015


6.8.  Retrieve Accepted Root Certificates

   GET https://<log server>/ct/v2/get-roots

   No inputs.

   Outputs:

      certificates:  An array of base64 encoded root certificates that
         are acceptable to the log.

      max_chain:  If the server has chosen to limit the length of chains
         it accepts, this is the maximum number of certificates in the
         chain, in decimal.  If there is no limit, this is omitted.

7.  TLS Servers

   TLS servers MUST use at least one of the three mechanisms listed
   below to present one or more SCTs or inclusion proofs from one or
   more logs to each TLS client during TLS handshakes, where each SCT or
   inclusion proof corresponds to the server certificate or to a name-
   constrained intermediate the server certificate chains to.  Three
   mechanisms are provided because they have different tradeoffs.

   o  A TLS extension (Section 7.4.1.4 of [RFC5246]) with type
      "transparency_info" (see Section 7.1).  This mechanism allows TLS
      servers to participate in CT without the cooperation of CAs,
      unlike the other two mechanisms.  It also allows SCTs and
      inclusion proofs to be updated on the fly.

   o  An Online Certificate Status Protocol (OCSP) [RFC6960] response
      extension (see Section 8.1.1), where the OCSP response is provided
      in the "certificate_status" TLS extension (Section 8 of
      [RFC6066]), also known as OCSP stapling.  This mechanism is
      already widely (but not universally) implemented.  It also allows
      SCTs and inclusion proofs to be updated on the fly.

   o  An X509v3 certificate extension (see Section 8.1.2).  This
      mechanism allows the use of unmodified TLS servers, but the SCTs
      and inclusion proofs cannot be updated on the fly.  Since the logs
      from where the SCTs and inclusion proofs originated won't
      necessarily be accepted by TLS clients for the full lifetime of
      the certificate, there is a risk that TLS clients will
      subsequently consider the certificate to be non-compliant and in
      need of re-issuance.

   TLS servers SHOULD send SCTs or inclusion proofs from multiple logs
   in case one or more logs are not acceptable to the TLS client (for



Laurie, et al.            Expires May 23, 2016                 [Page 31]

Internet-Draft          Certificate Transparency           November 2015


   example, if a log has been struck off for misbehavior, has had a key
   compromise, or is not known to the TLS client).

   Multiple SCTs, inclusion proofs, and indeed "TransItem" structures of
   any type, are combined into a list as follows:

       opaque SerializedTransItem<1..2^16-1>;

       struct {
           SerializedTransItem trans_item_list<1..2^16-1>;
       } TransItemList;

   Here, "SerializedTransItem" is an opaque byte string that contains
   the serialized "TransItem" structure.  This encoding ensures that TLS
   clients can decode each "TransItem" individually (so, for example, if
   there is a version upgrade, out-of-date clients can still parse old
   "TransItem" structures while skipping over new "TransItem" structures
   whose versions they don't understand).

   TODO: We need to define at least one ItemExtensionType for
   associating SCT and inclusion proof TransItems with the relevant
   certificate.

7.1.  TLS Extension

   If a TLS client includes the "transparency_info" extension type in
   the ClientHello, the TLS server MAY include the "transparency_info"
   extension in the ServerHello with "extension_data" set to a
   "TransItemList".  The TLS server is not expected to process or
   include this extension when a TLS session is resumed, since session
   resumption uses the original session information.

8.  Certification Authorities

8.1.  Transparency Information X.509v3 Extension

   One or more "TransItem" structures can be embedded in the
   Transparency Information X.509v3 extension, which has OID <TBD> and
   SHOULD be non-critical.  This extension can be included in OCSP
   responses and certificates.  Since RFC5280 requires the "extnValue"
   field (an OCTET STRING) of each X.509v3 extension to include the DER
   encoding of an ASN.1 value, we cannot embed a "TransItemList"
   directly.  Instead, we have to wrap it inside an additional OCTET
   STRING, which we then put into the "extnValue" field:

       TransparencyInformationSyntax ::= OCTET STRING

   "TransparencyInformationSyntax" contains a "TransItemList".



Laurie, et al.            Expires May 23, 2016                 [Page 32]

Internet-Draft          Certificate Transparency           November 2015


8.1.1.  OCSP Response Extension

   A certification authority may include a Transparency Information
   X.509v3 extension in the "singleExtensions" of a "SingleResponse" in
   an OCSP response.  The included SCTs or inclusion proofs MUST be for
   the certificate identified by the "certID" of that "SingleResponse",
   or for a precertificate that corresponds to that certificate, or for
   a name-constrained intermediate to which that certificate chains.

8.1.2.  Certificate Extension

   A certification authority may include a Transparency Information
   X.509v3 extension in a certificate.  Any included SCTs or inclusion
   proofs MUST be either for a precertificate that corresponds to this
   certificate, or for a name-constrained intermediate to which this
   certificate chains.

9.  Clients

   There are various different functions clients of logs might perform.
   We describe here some typical clients and how they should function.
   Any inconsistency may be used as evidence that a log has not behaved
   correctly, and the signatures on the data structures prevent the log
   from denying that misbehavior.

   All clients need various metadata in order to communicate with logs
   and verify their responses.  This metadata is described below, but
   note that this document does not describe how the metadata is
   obtained, which is implementation dependent (see, for example,
   [Chromium.Policy]).

   Clients should somehow exchange STHs they see, or make them available
   for scrutiny, in order to ensure that they all have a consistent
   view.  The exact mechanisms will be in separate documents, but it is
   expected there will be a variety.

9.1.  Metadata

   In order to communicate with and verify a log, clients need metadata
   about the log.

   Base URL:  The URL to substitute for <log server> in Section 6.

   Hash Algorithm  The hash algorithm used for the Merkle Tree (see
      Section 11.2).

   Signing Algorithm  The signing algorithm used (see Section 2.1.4).




Laurie, et al.            Expires May 23, 2016                 [Page 33]

Internet-Draft          Certificate Transparency           November 2015


   Public Key  The public key used to verify signatures generated by the
      log.  A log MUST NOT use the same keypair as any other log.

   Log ID  The OID that uniquely identifies the log.

   Maximum Merge Delay  The MMD the log has committed to.

   Version  The version of the protocol supported by the log (currently
      1 or 2).

   Maximum Chain Length  The longest chain submission the log is willing
      to accept, if the log chose to limit it.

   STH Frequency Count  The maximum number of STHs the log may produce
      in any period equal to the "Maximum Merge Delay" (see
      Section 5.8).

   Final STH  If a log has been closed down (i.e. no longer accepts new
      entries), existing entries may still be valid.  In this case, the
      client should know the final valid STH in the log to ensure no new
      entries can be added without detection.

   [JSON.Metadata] is an example of a metadata format which includes the
   above elements.

9.2.  TLS Client

   TLS clients receive SCTs alongside or in certificates, either for the
   server certificate itself or for a name-constrained intermediate the
   server certificate chains to.  TLS clients MUST implement all of the
   three mechanisms by which TLS servers may present SCTs (see
   Section 7).  TLS clients that support the "transparency_info" TLS
   extension SHOULD include it in ClientHello messages, with
   "extension_data" set to <TBD>.

   TODO: What should the TLS client communicate in the extension_data?
   Version(s) of CT that it supports?  Certain types of TransItem that
   it can handle?  Whether or not it wants to gossip?

   In addition to normal validation of the certificate and its chain,
   TLS clients SHOULD validate each supplied SCT by computing the
   signature input from the SCT data as well as the certificate and
   verifying the signature, using the corresponding log's public key.
   TLS clients MUST reject SCTs whose timestamp is in the future.

   TLS clients SHOULD also validate each supplied inclusion proof (see
   Section 9.4.1), in order to audit the log.  If no inclusion proof was
   supplied by the TLS server, the TLS client MAY request one directly



Laurie, et al.            Expires May 23, 2016                 [Page 34]

Internet-Draft          Certificate Transparency           November 2015


   from the corresponding log using "get-proof-by-hash" (Section 6.5) or
   "get-all-by-hash" (Section 6.6), and then validate it.

   To be considered compliant, a certificate MUST be accompanied by at
   least one valid SCT or at least one valid inclusion proof.  A
   certificate not accompanied by any valid SCTs or any valid inclusion
   proofs MUST NOT be considered compliant by TLS clients.  However,
   specifying the TLS clients' behavior once compliance or non-
   compliance has been determined (for example, whether a certificate
   should be rejected due to non-compliance) is outside the scope of
   this document.

   If the TLS client holds an STH that predates the SCT, it MAY, in the
   process of auditing, request a new STH from the log (Section 6.3),
   then verify it by requesting a consistency proof (Section 6.4).  Note
   that if the TLS client uses "get-all-by-hash", then it will already
   have the new STH.

9.3.  Monitor

   Monitors watch logs and check that they behave correctly.  Monitors
   may additionally watch for certificates of interest.  For example, a
   monitor may be configured to report on all certificates that apply to
   a specific domain name when fetching new entries for consistency
   validation.

   A monitor needs to, at least, inspect every new entry in each log it
   watches.  It may also want to keep copies of entire logs.  In order
   to do this, it should follow these steps for each log:

   1.  Fetch the current STH (Section 6.3).

   2.  Verify the STH signature.

   3.  Fetch all the entries in the tree corresponding to the STH
       (Section 6.7).

   4.  Confirm that the tree made from the fetched entries produces the
       same hash as that in the STH.

   5.  Fetch the current STH (Section 6.3).  Repeat until the STH
       changes.

   6.  Verify the STH signature.

   7.  Fetch all the new entries in the tree corresponding to the STH
       (Section 6.7).  If they remain unavailable for an extended




Laurie, et al.            Expires May 23, 2016                 [Page 35]

Internet-Draft          Certificate Transparency           November 2015


       period, then this should be viewed as misbehavior on the part of
       the log.

   8.  Either:

       1.  Verify that the updated list of all entries generates a tree
           with the same hash as the new STH.

       Or, if it is not keeping all log entries:

       1.  Fetch a consistency proof for the new STH with the previous
           STH (Section 6.4).

       2.  Verify the consistency proof.

       3.  Verify that the new entries generate the corresponding
           elements in the consistency proof.

   9.  Go to Step 5.

9.4.  Auditing

   Auditing is taking partial information about a log as input and
   verifying that this information is consistent with other partial
   information held.  All clients described above may perform auditing
   as an additional function.  The action taken by the client if audit
   fails is not specified, but note that in general if audit fails, the
   client is in possession of signed proof of the log's misbehavior.

   A monitor (Section 9.3) can audit by verifying the consistency of
   STHs it receives, ensure that each entry can be fetched and that the
   STH is indeed the result of making a tree from all fetched entries.

   A TLS client (Section 9.2) can audit by verifying an SCT against any
   STH dated after the SCT timestamp + the Maximum Merge Delay by
   requesting a Merkle inclusion proof (Section 6.5).  It can also
   verify that the SCT corresponds to the certificate it arrived with
   (i.e. the log entry is that certificate, is a precertificate for that
   certificate or is an appropriate name-constrained intermediate [see
   Section 4.3]).

   The following algorithm outlines may be useful for clients that wish
   to perform various audit operations.








Laurie, et al.            Expires May 23, 2016                 [Page 36]

Internet-Draft          Certificate Transparency           November 2015


9.4.1.  Verifying an inclusion proof

   When a client has received a "TransItem" of type "inclusion_proof"
   and wishes to verify inclusion of an input "hash" for an STH with a
   given "tree_size" and "root_hash", the following algorithm may be
   used to prove the "hash" was included in the "root_hash":

   1.  Set "fn" to "leaf_index" and "sn" to "tree_size - 1".

   2.  Set "r" to "hash".

   3.  For each value "p" in the "inclusion_path" array:

       If "LSB(fn)" is set, or if "fn" is equal to "sn", then:

       1.  Set "r" to "HASH(0x01 || p || r)"

       2.  If "LSB(fn)" is not set, then right-shift both "fn" and "sn"
           equally until either "LSB(fn)" is set or "fn" is "0".

       Otherwise:

          Set "r" to "HASH(0x01 || r || p)"

       Finally, right-shift both "fn" and "sn" one time.

   4.  Compare "r" against the "root_hash".  If they are equal, then the
       log has proven the inclusion of "hash".

9.4.2.  Verifying consistency between two STHs

   When a client has an STH "first_hash" for tree size "first", an STH
   "second_hash" for tree size "second" where "0 < first < second", and
   has received a "TransItem" of type "consistency_proof" that they wish
   to use to verify both hashes, the following algorithm may be used:

   1.  If "first" is an exact power of 2, then prepend "first_hash" to
       the "consistency_path" array.

   2.  Set "fn" to "first - 1" and "sn" to "second - 1".

   3.  If "LSB(fn)" is set, then right-shift both "fn" and "sn" equally
       until "LSB(fn)" is not set.

   4.  Set both "fr" and "sr" to the first value in the
       "consistency_path" array.

   5.  For each subsequent value "c" in the "consistency_path" array:



Laurie, et al.            Expires May 23, 2016                 [Page 37]

Internet-Draft          Certificate Transparency           November 2015


       If "LSB(fn)" is set, or if "fn" is equal to "sn", then:

       1.  Set "fr" to "HASH(0x01 || c || fr)"
           Set "sr" to "HASH(0x01 || c || sr)"

       2.  If "LSB(fn)" is not set, then right-shift both "fn" and "sn"
           equally until either "LSB(fn)" is set or "fn" is "0".

       Otherwise:

          Set "sr" to "HASH(0x01 || sr || c)"

       Finally, right-shift both "fn" and "sn" one time.

   6.  After completing iterating through the "consistency_path" array
       as described above, verify that the "fr" calculated is equal to
       the "first_hash" supplied and that the "sr" calculated is equal
       to the "second_hash" supplied.

9.4.3.  Verifying root hash given entries

   When a client has a complete list of leaf input "entries" from "0" up
   to "tree_size - 1" and wishes to verify this list against an STH
   "root_hash" returned by the log for the same "tree_size", the
   following algorithm may be used:

   1.  Set "stack" to an empty stack.

   2.  For each "i" from "0" up to "tree_size - 1":

       1.  Push "HASH(0x00 || entries[i])" to "stack".

       2.  Set "merge_count" to the lowest value ("0" included) such
           that "LSB(i >> merge_count)" is not set.  In other words, set
           "merge_count" to the number of consecutive "1"s found
           starting at the least significant bit of "i".

       3.  Repeat "merge_count" times:

           1.  Pop "right" from "stack".

           2.  Pop "left" from "stack".

           3.  Push "HASH(0x01 || left || right)" to "stack".

   3.  If there is more than one element in the "stack", repeat the same
       merge procedure (Step 2.3 above) until only a single element
       remains.



Laurie, et al.            Expires May 23, 2016                 [Page 38]

Internet-Draft          Certificate Transparency           November 2015


   4.  The remaining element in "stack" is the Merkle Tree hash for the
       given "tree_size" and should be compared by equality against the
       supplied "root_hash".

10.  Algorithm Agility

   It is not possible for a log to change any of its algorithms part way
   through its lifetime.  If it should become necessary to deprecate an
   algorithm used by a live log, then the log should be frozen as
   specified in Section 9.1 and a new log should be started.  If
   necessary, the new log can contain existing entries from the frozen
   log, which monitors can verify are an exact match.

11.  IANA Considerations

11.1.  TLS Extension Type

   IANA is asked to allocate an RFC 5246 ExtensionType value for the
   "transparency_info" TLS extension.  IANA should update this extension
   type to point at this document.

11.2.  Hash Algorithms

   IANA is asked to establish a registry of hash values, initially
   consisting of:

                     +-------+----------------------+
                     | Index | Hash                 |
                     +-------+----------------------+
                     | 0     | SHA-256 [FIPS.180-4] |
                     +-------+----------------------+

11.3.  TransItem Extensions

   IANA is asked to establish a registry of TransItem extensions,
   initially consisting of:

                           +-------+-----------+
                           | Type  | Extension |
                           +-------+-----------+
                           | 65535 | reserved  |
                           +-------+-----------+

   TBD: policy for adding to the registry







Laurie, et al.            Expires May 23, 2016                 [Page 39]

Internet-Draft          Certificate Transparency           November 2015


11.4.  SCT Extensions

   IANA is asked to establish a registry of SCT extensions, initially
   consisting of:

                           +-------+-----------+
                           | Type  | Extension |
                           +-------+-----------+
                           | 65535 | reserved  |
                           +-------+-----------+

   TBD: policy for adding to the registry

11.5.  STH Extensions

   IANA is asked to establish a registry of STH extensions, initially
   consisting of:

                           +-------+-----------+
                           | Type  | Extension |
                           +-------+-----------+
                           | 65535 | reserved  |
                           +-------+-----------+

   TBD: policy for adding to the registry

12.  Security Considerations

   With CAs, logs, and servers performing the actions described here,
   TLS clients can use logs and signed timestamps to reduce the
   likelihood that they will accept misissued certificates.  If a server
   presents a valid signed timestamp for a certificate, then the client
   knows that a log has committed to publishing the certificate.  From
   this, the client knows that the subject of the certificate has had
   some time to notice the misissue and take some action, such as asking
   a CA to revoke a misissued certificate, or that the log has
   misbehaved, which will be discovered when the SCT is audited.  A
   signed timestamp is not a guarantee that the certificate is not
   misissued, since the subject of the certificate might not have
   checked the logs or the CA might have refused to revoke the
   certificate.

   In addition, if TLS clients will not accept unlogged certificates,
   then site owners will have a greater incentive to submit certificates
   to logs, possibly with the assistance of their CA, increasing the
   overall transparency of the system.





Laurie, et al.            Expires May 23, 2016                 [Page 40]

Internet-Draft          Certificate Transparency           November 2015


12.1.  Misissued Certificates

   Misissued certificates that have not been publicly logged, and thus
   do not have a valid SCT, are not considered compliant (so TLS clients
   may decide, for example, to reject them).  Misissued certificates
   that do have an SCT from a log will appear in that public log within
   the Maximum Merge Delay, assuming the log is operating correctly.
   Thus, the maximum period of time during which a misissued certificate
   can be used without being available for audit is the MMD.

12.2.  Detection of Misissue

   The logs do not themselves detect misissued certificates; they rely
   instead on interested parties, such as domain owners, to monitor them
   and take corrective action when a misissue is detected.

12.3.  Redaction of Public Domain Name Labels

   CAs SHOULD NOT redact domain name labels in precertificates such that
   the entirety of the domain space below the unredacted part of the
   domain name is not owned or controlled by a single entity (e.g.
   "?.com" and "?.co.uk" would both be problematic).  Logs MUST NOT
   reject any precertificate that is overly redacted but which is
   otherwise considered compliant.  It is expected that monitors will
   treat overly redacted precertificates as potentially misissued.  TLS
   clients MAY reject a certificate whose corresponding precertificate
   would be overly redacted, perhaps using the same mechanism for
   determining whether a wildcard in a domain name of a certificate is
   too broad.

12.4.  Misbehaving Logs

   A log can misbehave in two ways: (1) by failing to incorporate a
   certificate with an SCT in the Merkle Tree within the MMD and (2) by
   violating its append-only property by presenting two different,
   conflicting views of the Merkle Tree at different times and/or to
   different parties.  Both forms of violation will be promptly and
   publicly detectable.

   Violation of the MMD contract is detected by log clients requesting a
   Merkle audit proof for each observed SCT.  These checks can be
   asynchronous and need only be done once per each certificate.  In
   order to protect the clients' privacy, these checks need not reveal
   the exact certificate to the log.  Clients can instead request the
   proof from a trusted auditor (since anyone can compute the audit
   proofs from the log) or request Merkle proofs for a batch of
   certificates around the SCT timestamp.




Laurie, et al.            Expires May 23, 2016                 [Page 41]

Internet-Draft          Certificate Transparency           November 2015


   Violation of the append-only property can be detected by clients
   comparing their instances of the Signed Tree Heads.  As soon as two
   conflicting Signed Tree Heads for the same log are detected, this is
   cryptographic proof of that log's misbehavior.  There are various
   ways this could be done, for example via gossip (see
   http://trac.tools.ietf.org/id/draft-linus-trans-gossip-00.txt) or
   peer-to-peer communications or by sending STHs to monitors (who could
   then directly check against their own copy of the relevant log).

12.5.  Multiple SCTs

   TLS servers may wish to offer multiple SCTs, each from a different
   log.

   o  If a CA and a log collude, it is possible to temporarily hide
      misissuance from clients.  Including SCTs from different logs
      makes it more difficult to mount this attack.

   o  If a log misbehaves, a consequence may be that clients cease to
      trust it.  Since the time an SCT may be in use can be considerable
      (several years is common in current practice when the SCT is
      embedded in a certificate), servers may wish to reduce the
      probability of their certificates being rejected as a result by
      including SCTs from different logs.

   o  TLS clients may have policies related to the above risks requiring
      servers to present multiple SCTs.  For example Chromium
      [Chromium.Log.Policy] currently requires multiple SCTs to be
      presented with EV certificates in order for the EV indicator to be
      shown.

13.  Efficiency Considerations

   The Merkle Tree design serves the purpose of keeping communication
   overhead low.

   Auditing logs for integrity does not require third parties to
   maintain a copy of each entire log.  The Signed Tree Heads can be
   updated as new entries become available, without recomputing entire
   trees.  Third-party auditors need only fetch the Merkle consistency
   proofs against a log's existing STH to efficiently verify the append-
   only property of updates to their Merkle Trees, without auditing the
   entire tree.








Laurie, et al.            Expires May 23, 2016                 [Page 42]

Internet-Draft          Certificate Transparency           November 2015


14.  Acknowledgements

   The authors would like to thank Erwann Abelea, Robin Alden, Al
   Cutter, Francis Dupont, Adam Eijdenberg, Stephen Farrell, Daniel Kahn
   Gillmor, Brad Hill, Jeff Hodges, Paul Hoffman, Jeffrey Hutzelman,
   Stephen Kent, SM, Alexey Melnikov, Linus Nordberg, Chris Palmer,
   Trevor Perrin, Pierre Phaneuf, Melinda Shore, Ryan Sleevi, Carl
   Wallace and Paul Wouters for their valuable contributions.

15.  References

15.1.  Normative References

   [DSS]      National Institute of Standards and Technology, "Digital
              Signature Standard (DSS)", FIPS 186-3, June 2009,
              <http://csrc.nist.gov/publications/fips/fips186-3/
              fips_186-3.pdf>.

   [FIPS.180-4]
              National Institute of Standards and Technology, "Secure
              Hash Standard", FIPS PUB 180-4, March 2012,
              <http://csrc.nist.gov/publications/fips/fips180-4/
              fips-180-4.pdf>.

   [HTML401]  Raggett, D., Le Hors, A., and I. Jacobs, "HTML 4.01
              Specification", World Wide Web Consortium Recommendation
              REC-html401-19991224, December 1999,
              <http://www.w3.org/TR/1999/REC-html401-19991224>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/
              RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, DOI 10.17487/
              RFC2616, June 1999,
              <http://www.rfc-editor.org/info/rfc2616>.

   [RFC3447]  Jonsson, J. and B. Kaliski, "Public-Key Cryptography
              Standards (PKCS) #1: RSA Cryptography Specifications
              Version 2.1", RFC 3447, DOI 10.17487/RFC3447, February
              2003, <http://www.rfc-editor.org/info/rfc3447>.







Laurie, et al.            Expires May 23, 2016                 [Page 43]

Internet-Draft          Certificate Transparency           November 2015


   [RFC4627]  Crockford, D., "The application/json Media Type for
              JavaScript Object Notation (JSON)", RFC 4627, DOI
              10.17487/RFC4627, July 2006,
              <http://www.rfc-editor.org/info/rfc4627>.

   [RFC4648]  Josefsson, S., "The Base16, Base32, and Base64 Data
              Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
              <http://www.rfc-editor.org/info/rfc4648>.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/
              RFC5246, August 2008,
              <http://www.rfc-editor.org/info/rfc5246>.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
              <http://www.rfc-editor.org/info/rfc5280>.

   [RFC5652]  Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
              RFC 5652, DOI 10.17487/RFC5652, September 2009,
              <http://www.rfc-editor.org/info/rfc5652>.

   [RFC5905]  Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch,
              "Network Time Protocol Version 4: Protocol and Algorithms
              Specification", RFC 5905, DOI 10.17487/RFC5905, June 2010,
              <http://www.rfc-editor.org/info/rfc5905>.

   [RFC6066]  Eastlake 3rd, D., "Transport Layer Security (TLS)
              Extensions: Extension Definitions", RFC 6066, DOI
              10.17487/RFC6066, January 2011,
              <http://www.rfc-editor.org/info/rfc6066>.

   [RFC6125]  Saint-Andre, P. and J. Hodges, "Representation and
              Verification of Domain-Based Application Service Identity
              within Internet Public Key Infrastructure Using X.509
              (PKIX) Certificates in the Context of Transport Layer
              Security (TLS)", RFC 6125, DOI 10.17487/RFC6125, March
              2011, <http://www.rfc-editor.org/info/rfc6125>.

   [RFC6960]  Santesson, S., Myers, M., Ankney, R., Malpani, A.,
              Galperin, S., and C. Adams, "X.509 Internet Public Key
              Infrastructure Online Certificate Status Protocol - OCSP",
              RFC 6960, DOI 10.17487/RFC6960, June 2013,
              <http://www.rfc-editor.org/info/rfc6960>.





Laurie, et al.            Expires May 23, 2016                 [Page 44]

Internet-Draft          Certificate Transparency           November 2015


   [RFC6979]  Pornin, T., "Deterministic Usage of the Digital Signature
              Algorithm (DSA) and Elliptic Curve Digital Signature
              Algorithm (ECDSA)", RFC 6979, DOI 10.17487/RFC6979, August
              2013, <http://www.rfc-editor.org/info/rfc6979>.

15.2.  Informative References

   [Chromium.Log.Policy]
              The Chromium Projects, "Chromium Certificate Transparency
              Log Policy", 2014, <http://www.chromium.org/Home/chromium-
              security/certificate-transparency/log-policy>.

   [Chromium.Policy]
              The Chromium Projects, "Chromium Certificate
              Transparency", 2014, <http://www.chromium.org/Home/
              chromium-security/certificate-transparency>.

   [CrosbyWallach]
              Crosby, S. and D. Wallach, "Efficient Data Structures for
              Tamper-Evident Logging", Proceedings of the 18th USENIX
              Security Symposium, Montreal, August 2009,
              <http://static.usenix.org/event/sec09/tech/full_papers/
              crosby.pdf>.

   [EVSSLGuidelines]
              CA/Browser Forum, "Guidelines For The Issuance And
              Management Of Extended Validation Certificates", 2007,
              <https://cabforum.org/wp-content/uploads/
              EV_Certificate_Guidelines.pdf>.

   [JSON.Metadata]
              The Chromium Projects, "Chromium Log Metadata JSON
              Schema", 2014, <http://www.certificate-transparency.org/
              known-logs/log_list_schema.json>.

   [RFC6962]  Laurie, B., Langley, A., and E. Kasper, "Certificate
              Transparency", RFC 6962, DOI 10.17487/RFC6962, June 2013,
              <http://www.rfc-editor.org/info/rfc6962>.













Laurie, et al.            Expires May 23, 2016                 [Page 45]

Internet-Draft          Certificate Transparency           November 2015


Appendix A.  TransItemV1

   TODO: Finish writing this section.  Or should it be in a separate
   document?

       struct {
           TransType type;
           select (type) {
               case x509_sct: SignedCertificateTimestampV1;
               case precert_sct: SignedCertificateTimestampV1;
               case signed_tree_head: SignedTreeHeadDataV1;
               case consistency_proof: ConsistencyProofDataV1;
               case inclusion_proof: InclusionProofDataV1;
           } data;
       } TransItemV1;

       opaque SHA256Hash[32];

       struct {
           Version version = v1;
           SHA256Hash log_id;
           uint64 timestamp;
           SctExtensions extensions;
           digitally-signed struct {
               Version version = v1;
               uint8 signature_type = 0;  /* "certificate_timestamp" */
               uint64 timestamp;
               TransType type;  /* x509_entry(0) or precert_entry(1) */
               select (type) {
                   case x509_entry: ASN.1Cert;
                   case precert_entry: PreCert;
               } signed_entry;
               SctExtensions extensions;
           } signature;
       } SignedCertificateTimestampV1;

       struct {
           SHA256Hash log_id;
           uint64 timestamp;
           uint64 tree_size;
           SHA256Hash sha256_root_hash;
           digitally-signed struct {
               Version version = v1;
               uint8 signature_type = 1;  /* "tree_hash" */
               uint64 timestamp;
               uint64 tree_size;
               SHA256Hash sha256_root_hash;
           } signature;



Laurie, et al.            Expires May 23, 2016                 [Page 46]

Internet-Draft          Certificate Transparency           November 2015


       } SignedTreeHeadDataV1;

       struct {
           SHA256Hash log_id;
           uint64 tree_size_1;
           uint64 tree_size_2;
           SHA256Hash consistency_path<1..2^8-1>;
       } ConsistencyProofDataV1;

       struct {
           SHA256Hash log_id;
           uint64 tree_size;
           uint64 leaf_index;
           SHA256Hash inclusion_path<1..2^8-1>;
       } InclusionProofDataV1;

Authors' Addresses

   Ben Laurie
   Google UK Ltd.

   EMail: benl@google.com


   Adam Langley
   Google Inc.

   EMail: agl@google.com


   Emilia Kasper
   Google Switzerland GmbH

   EMail: ekasper@google.com


   Eran Messeri
   Google UK Ltd.

   EMail: eranm@google.com


   Rob Stradling
   Comodo CA, Ltd.

   EMail: rob.stradling@comodo.com





Laurie, et al.            Expires May 23, 2016                 [Page 47]