ddclient.conf.in

######################################################################
##
## Define default global variables with lines like:
## 	var=value [, var=value]*
## These values will be used for each following host unless overridden
## with a local variable definition.
##
## Define local variables for one or more hosts with:
## 	var=value [, var=value]* host.and.domain[,host2.and.domain...]
##
## Lines can be continued on the following line by ending the line
## with a \
##
##
## Warning: not all supported routers or dynamic DNS services
##          are mentioned here.
##
######################################################################
daemon=300				# check every 300 seconds
syslog=yes				# log update msgs to syslog
mail=root				# mail all msgs to root
mail-failure=root		# mail failed update msgs to root
pid=@runstatedir@/ddclient.pid		# record PID in file.
ssl=yes					# use ssl-support.  Works with
						# ssl-library
# postscript=script		# run script after updating.  The
						# new IP is added as argument.
#
#use=watchguard-soho,        fw=192.168.111.1:80	# via Watchguard's SOHO FW
#use=netopia-r910,           fw=192.168.111.1:80	# via Netopia R910 FW
#use=smc-barricade,          fw=192.168.123.254:80	# via SMC's Barricade FW
#use=netgear-rt3xx,          fw=192.168.0.1:80		# via Netgear's internet FW
#use=linksys,                fw=192.168.1.1:80		# via Linksys's internet FW
#use=maxgate-ugate3x00,      fw=192.168.0.1:80		# via MaxGate's UGATE-3x00  FW
#use=elsa-lancom-dsl10,      fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch01, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
#use=elsa-lancom-dsl10-ch02, fw=10.0.0.254:80		# via ELSA LanCom DSL/10 DSL Router
#use=alcatel-stp,            fw=10.0.0.138:80           # via Alcatel Speed Touch Pro
#use=xsense-aero,            fw=192.168.1.1:80          # via Xsense Aero Router
#use=allnet-1298,            fw=192.168.1.1:80          # via AllNet 1298 DSL Router
#use=3com-oc-remote812,	     fw=192.168.0.254:80	# via 3com OfficeConnect Remote 812
#use=e-tech,                 fw=192.168.1.1:80          # via E-tech Router
#use=cayman-3220h,           fw=192.168.0.1:1080        # via Cayman 3220-H DSL Router
#
#fw-login=admin,             fw-password=XXXXXX		# FW login and password
#
## To obtain an IP address from FW status page (using fw-login, fw-password)
#use=fw, fw=192.168.1.254/status.htm, fw-skip='IP Address' # found after IP Address
#
## To obtain an IP address from Web status page (using the proxy if defined)
## by default, checkip.dyndns.org is used if you use the dyndns protocol.
## Using use=web is enough to get it working.
## WARNING: set deamon at least to 600 seconds if you use checkip or you could
## get banned from their service.
#use=web, web=checkip.dyndns.org/, web-skip='IP Address' # found after IP Address
#
#use=ip,                     ip=127.0.0.1	# via static IP's
#use=if,                     if=eth0		# via interfaces
#use=web					# via web
#
#protocol=dyndns2				# default protocol
#proxy=fasthttp.sympatico.ca:80			# default proxy
#server=members.dyndns.org			# default server
#server=members.dyndns.org:8245			# default server (bypassing proxies)

#login=your-login				# default login
#password=test					# default password
#mx=mx.for.your.host				# default MX
#backupmx=yes|no				# host is primary MX?
#wildcard=yes|no				# add wildcard CNAME?

##
## dyndns.org dynamic addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# server=members.dyndns.org,		\
# protocol=dyndns2			\
# your-dynamic-host.dyndns.org

##
## dyndns.org static addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# static=yes,				\
# server=members.dyndns.org,		\
# protocol=dyndns2			\
# your-static-host.dyndns.org

##
## dyndns.org custom addresses
##
## (supports variables: wildcard,mx,backupmx)
##
# custom=yes,				\
# server=members.dyndns.org,		\
# protocol=dyndns2			\
# your-domain.top-level,your-other-domain.top-level

##
## ZoneEdit (zoneedit.com)
##
# server=dynamic.zoneedit.com, 		\
# protocol=zoneedit1,			\
# login=your-zoneedit-login,  		\
# password=your-zoneedit-password	\
# your.any.domain,your-2nd.any.dom

##
## EasyDNS (easydns.com)
##
# server=members.easydns.com, 		\
# protocol=easydns,			\
# login=your-easydns-login,  		\
# password=your-easydns-password	\
# your.any.domain,your-2nd.any.domain

##
## dslreports.com dynamic-host monitoring
##
# server=members.dslreports.com		\
# protocol=dslreports1,			\
# login=dslreports-login,		\
# password=dslreports-password		\
# dslreports-unique-id

##
## OrgDNS.org account-configuration
##
# use=web, web=members.orgdns.org/nic/ip
# protocol=dyndns2
# server=www.orgdns.org 		\
# login=yourLoginName 			\
# password=yourPassword 		\
# yourSubdomain.orgdns.org

##
## NameCheap (namecheap.com)
##
# protocol=namecheap,                     \
# server=dynamicdns.park-your-domain.com,	\
# login=example.com,                      \
# password=example.com-password           \
# subdomain.example.com

##
## NearlyFreeSpeech.NET (nearlyfreespeech.net)
##
# protocol = nfsn,                      \
# login=member-login,                   \
# password=api-key,                     \
# zone=example.com                      \
# example.com,subdomain.example.com

##
## Loopia (loopia.se)
##
# use=web, web=loopia
# protocol=dyndns2
# server=dns.loopia.se
# script=/XDynDNSServer/XDynDNS.php
# login=my-loopia.se-login
# password=my-loopia.se-password
# my.domain.tld,other.domain.tld

##
## NoIP (noip.com)
##
# protocol=noip,                        \
# ssl=yes,                              \
# server=dynupdate.no-ip.com,           \
# login=your-noip-login,                \
# password=your-noip-password,          \
# your-host.domain.com, your-2nd-host.domain.com

##
## ChangeIP (changeip.com)
##
## single host update
# protocol=changeip,                   \
# login=my-my-changeip.com-login,      \
# password=my-changeip.com-password    \
# myhost.changeip.org

##
## CloudFlare (www.cloudflare.com)
##
#protocol=cloudflare,        \
#zone=domain.tld,            \
#ttl=1,                      \
#login=your-login-email,     \ # Only needed if you are using your global API key. If you are using an API token, set it to "token" (wihtout double quotes).
#password=APIKey             \ # This is either your global API key, or an API token. If you are using an API token, it must have the permissions "Zone - DNS - Edit" and "Zone - Zone - Read". The Zone resources must be "Include - All zones".
#domain.tld,my.domain.tld

##
## Gandi (gandi.net)
##
## Single host update
# protocol=gandi,                      \
# zone=example.com,                    \
# password=my-gandi-api-key,           \
# ttl=3h                               \
# myhost.example.com

##
## Google Domains (www.google.com/domains)
##
# protocol=googledomains,
# login=my-auto-generated-username,
# password=my-auto-generated-password
# my.domain.tld, otherhost.domain.tld

##
## Duckdns (http://www.duckdns.org/)
##
#
# protocol=duckdns, \
# password=my-auto-generated-password \
# hostwithoutduckdnsorg

##
## Freemyip (http://freemyip.com/)
##
#
# protocol=freemyip,
# password=my-token
# myhost

##
## MyOnlinePortal (http://myonlineportal.net)
##
# # ipv6=yes # optional
# use=web, web=myonlineportal.net/checkip
# # use=if, if=eth0     # alternative to use=web
# # if-skip=Scope:Link  # alternative to use=web
# protocol=dyndns2
# ssl=yes
# login=your-myonlineportal-username
# password=your-myonlineportal-password
# domain.myonlineportal.net

##
## nsupdate.info IPV4(https://www.nsupdate.info)
##
#use=web, web=http://ipv4.nsupdate.info/myip
#protocol=dyndns2
#server=ipv4.nsupdate.info
#login=domain.nsupdate.info
#password='123'
#domain.nsupdate.info

##
## nsupdate.info IPV6 (https://www.nsupdate.info)
## ddclient releases <= 3.8.1 do not support IPv6
##
#usev6=if, if=eth0
#protocol=dyndns2
#server=ipv6.nsupdate.info
#login=domain.nsupdate.info
#password='123'
#domain.nsupdate.info

##
## Yandex.Mail for Domain (domain.yandex.com)
##
# protocol=yandex,                      \
# login=domain.tld,                     \
# password=yandex-pdd-token             \
# my.domain.tld,other.domain.tld        \

##
## DNS Made Easy (https://dnsmadeeasy.com)
##
# protocol=dnsmadeeasy,
# login=your-account-email-address
# password=your-generated-password
# your-numeric-record-id-1,your-numeric-record-id-2,...

##
## OVH DynHost (https://ovh.com)
##
# protocol=ovh,
# login=example.com-dynhostuser,
# password=your_password
# test.example.com

##
## ClouDNS (https://www.cloudns.net)
##
# protocol=cloudns, \
# dynurl=https://ipv4.cloudns.net/api/dynamicURL/?q=Njc1OTE2OjY3Njk0NDM6YTk2, \
# myhost.example.com

##
## dinahosting (https://dinahosting.com)
##
# protocol=dinahosting, \
# login=myusername,     \
# password=mypassword   \
# myhost.mydomain.com

##
## dnsexit (www.dnsexit.com)
##
#protocol=dnsexit,                                            \
#login=myusername,                                            \
#password=mypassword,                                         \
#subdomain-1.domain.com,subdomain-2.domain.com

##
## Njal.la (http://njal.la/)
##
# protocol=njalla,
# password=mypassword
# quietreply=no|yes
# my-domain.com