README.md

dwc2-klipper

dwc2-klipper is a Docker image for running DWC2 and Klipper 3d Printer controllers. It is design to run on Raspberry Pi or similar.

More info

DockerHub Image

Because of recent changes to Klipper, this utilizes the fork from pluuuk as discussed here.

Prepare your printer.cfg file

Copy an appropriate config file from here and add the following lines to it:

[virtual_sdcard]
path: /home/dwc2-klipper/sdcard

[web_dwc2]
## optional - defaulting to Klipper
printer_name: Klipper
# optional - defaulting to 0.0.0.0
listen_adress: 0.0.0.0
# needed - use above 1024 as nonroot
listen_port: 4750
# optional defaulting to dwc2/web. Its a folder relative to your virtual sdcard.
web_path: dwc2/web

Rename the file printer.cfg and place in a known place on your docker host, which you will mount when starting the container.

Running via Docker

Pull the image. If using raspberry pi or similar use arm in place of [tag]. amd64 is also available:

docker pull seanauff/dwc2-klipper:[tag]

Start the container:

docker run -d --device /dev/ttyUSB0:/dev/ttyUSB0 -v [some/path/on/host]:/home/dwc2-klipper/config -p 4750:4750 seanauff/dwc2-klipper:[tag]

Build the image yourself

Clone the repository and build the image:

git clone https://github.com/seanauff/dwc2-klipper.git
docker build -t seanauff/dwc2-klipper dwc2-klipper