MAdafruit_BMP085.h

/*************************************************** 
  This is a library for the Adafruit BMP085/BMP180 Barometric Pressure + Temp sensor

  Designed specifically to work with the Adafruit BMP085 or BMP180 Breakout 
  ----> http://www.adafruit.com/products/391
  ----> http://www.adafruit.com/products/1603

  These displays use I2C to communicate, 2 pins are required to  
  interface
  Adafruit invests time and resources providing this open source code, 
  please support Adafruit and open-source hardware by purchasing 
  products from Adafruit!

  Written by Limor Fried/Ladyada for Adafruit Industries.  
  BSD license, all text above must be included in any redistribution
 ****************************************************/

#ifndef ADAFRUIT_BMP085_H
#define ADAFRUIT_BMP085_H

#if (ARDUINO >= 100)
 #include "Arduino.h"
#else
 #include "WProgram.h"
#endif
#include "Wire.h"

#define BMP085_DEBUG 0

#define BMP085_I2CADDR 0x77

#define BMP085_ULTRALOWPOWER 0
#define BMP085_STANDARD      1
#define BMP085_HIGHRES       2
#define BMP085_ULTRAHIGHRES  3
#define BMP085_CAL_AC1           0xAA  // R   Calibration data (16 bits)
#define BMP085_CAL_AC2           0xAC  // R   Calibration data (16 bits)
#define BMP085_CAL_AC3           0xAE  // R   Calibration data (16 bits)    
#define BMP085_CAL_AC4           0xB0  // R   Calibration data (16 bits)
#define BMP085_CAL_AC5           0xB2  // R   Calibration data (16 bits)
#define BMP085_CAL_AC6           0xB4  // R   Calibration data (16 bits)
#define BMP085_CAL_B1            0xB6  // R   Calibration data (16 bits)
#define BMP085_CAL_B2            0xB8  // R   Calibration data (16 bits)
#define BMP085_CAL_MB            0xBA  // R   Calibration data (16 bits)
#define BMP085_CAL_MC            0xBC  // R   Calibration data (16 bits)
#define BMP085_CAL_MD            0xBE  // R   Calibration data (16 bits)

#define BMP085_CONTROL           0xF4 
#define BMP085_TEMPDATA          0xF6
#define BMP085_PRESSUREDATA      0xF6
#define BMP085_READTEMPCMD          0x2E
#define BMP085_READPRESSURECMD            0x34


class Adafruit_BMP085 {
 public:
  Adafruit_BMP085();
  boolean begin(uint8_t mode = BMP085_ULTRAHIGHRES);  // by default go highres
  float readTemperature(void);
  int32_t readPressure(void);
  int32_t readSealevelPressure(float altitude_meters = 0);
  float readAltitude(float sealevelPressure = 101325); // std atmosphere
  uint16_t readRawTemperature(void);
  uint32_t readRawPressure(void);
  
 private:
  int32_t computeB5(int32_t UT);
  uint8_t read8(uint8_t addr);
  uint16_t read16(uint8_t addr);
  void write8(uint8_t addr, uint8_t data);

  uint8_t oversampling;

  int16_t ac1, ac2, ac3, b1, b2, mb, mc, md;
  uint16_t ac4, ac5, ac6;
};


#endif //  ADAFRUIT_BMP085_H