diff --git a/raw/esp32c6/Winky/_autoexec.be b/raw/esp32c6/Winky/_autoexec.be
new file mode 100644
index 00000000..6542898d
--- /dev/null
+++ b/raw/esp32c6/Winky/_autoexec.be
@@ -0,0 +1,29 @@
+# This file does nothing it just contains some
+# examples to suit your needs depending on project
+# It will be copied into filesystem to be editable
+# =====================================================
+
+# Set auto timezone
+#tasmota.cmd("Backlog0 Timezone 99; TimeStd 0,0,10,1,3,60; TimeDst 0,0,3,1,2,120")
+
+# Set Teleinfo in legacy (historique) mode at 1200 baud.
+#tasmota.cmd("EnergyConfig Historique")
+
+# Set Teleinfo in Standar mode at 9600 baud.
+#tasmota.cmd("EnergyConfig Standard")
+
+# Enable sending of all frames in raw mode
+#tasmota.cmd("EnergyConfig Full")
+
+# Send only each 1 on 10 frames received
+#tasmota.cmd("EnergyConfig Skip 9")
+
+# Disable Boot Loop Detection
+#tasmota.cmd("SetOption65 1")
+
+# Avoid conflict between native WS2812 and Berry control
+# disables native WS2812 (default Scheme is 0)
+#tasmota.cmd("Scheme 14")
+
+# load Winky teleinfo driver
+load("teleinfo.be")
diff --git a/raw/esp32c6/Winky/_teleinfo.be b/raw/esp32c6/Winky/_teleinfo.be
new file mode 100644
index 00000000..246ce69c
--- /dev/null
+++ b/raw/esp32c6/Winky/_teleinfo.be
@@ -0,0 +1,148 @@
+# Winky Teleinfo Driver, this is just a sample file that read both
+# voltage (USB and Super Capacitor), display on Web UI
+
+class TELEINFO: Driver
+  var vusb
+  var vcap
+  var strip
+  var bri
+  var is_usb
+  var tick_500ms
+
+  def init()
+    # First we need to get Analog voltage 
+    self.tick_500ms = false
+    self.every_500ms()
+
+    # Get LED Brightness from UI
+    var led = light.get()
+    self.bri = led["bri"]
+
+    # Instantiate our 2 WS2812 Leds
+    self.strip = Leds(2, 2, gpio.pin(gpio.WS2812, 1))
+
+    # Check Super Capacitor Voltage
+    if self.vcap < 4.5
+      # Not enough we should go to deepsleep from here
+      self.strip.set_pixel_color(0, 0xFF0000, self.bri)
+      self.sleep()
+    else
+      self.strip.set_pixel_color(0, 0x00FF00, self.bri)
+    end
+    self.strip.show()
+
+    # create rules to trigger
+    tasmota.add_rule("System#Init", /value -> self.set_led(0xFFFF00))
+    tasmota.add_rule("Wifi#Connected", /value -> self.set_led(0x00FFFF))
+    tasmota.add_rule("Mqtt#Connected", /value -> self.set_led(0x00FF00))
+    tasmota.add_rule("Tele#Energy#Power", /value -> self.done(value) )
+
+  end
+
+  def analog2voltage(v) 
+    v = int(v)
+    # Voltage is divided by 2 by a resistor R/R divider
+    return 3.3 * 2.0 * v / 4095
+  end
+
+  def set_deepsleep(s)
+    #import json
+    #var sensors=json.load(tasmota.read_sensors())
+    #self.on_a1(sensors['ANALOG']['A1'] )
+    #self.on_a2(sensors['ANALOG']['A2'] )
+    var cmd = "deepsleeptime " + str(s)
+    print ("set_deepsleep() ", cmd)
+    tasmota.cmd(cmd)
+  end
+
+  def sleep() 
+    self.strip.set_pixel_color(1, 0x000000, self.bri)
+    self.strip.set_pixel_color(0, 0x000000, self.bri)
+    self.strip.show()
+    print ("sleep()")
+    if self.is_usb == false
+      # DEBUG 
+      print("All Done, going to sleep")
+      if gpio.digital_read(23) != 0
+        # Sleep for 15s
+        self.set_deepsleep(15)
+      else
+        print("Button prevented sleep")
+      end
+    else
+      print("USB Connected no sleep")
+    end
+  end
+
+  def done(value) 
+    print("Done")
+    self.strip.set_pixel_color(1, 0x000000, self.bri)
+    self.strip.set_pixel_color(0, 0xFF00FF, self.bri)
+    self.strip.show()
+    tasmota.set_timer(250, /value -> self.sleep())
+  end
+
+  def set_led(color) 
+    # DEBUG print("Color:", color, "BRI:", self.bri)
+    self.strip.set_pixel_color(1, color, self.bri)
+    self.strip.show()
+  end
+
+  def every_500ms()
+    import json
+    import string
+    # get Analog voltage 
+    var sensors=json.load(tasmota.read_sensors())
+    self.vcap = self.analog2voltage(sensors['ANALOG']['A2'])
+    self.vusb = self.analog2voltage(sensors['ANALOG']['A1'])
+    if self.vusb > 4.5
+      self.is_usb = true 
+    else
+      self.is_usb = false
+    end
+    # DEBUG 
+    print(string.format("SuperCap:%.2fV  USB:%.2fV  USB:%d", self.vcap, self.vusb, self.is_usb))
+  end
+
+  def every_250ms()
+    if self.tick_500ms == true
+      self.tick_500ms = false
+      self.every_500ms()
+    else
+      self.tick_500ms = true
+    end
+  end
+  
+  def every_second()
+    # DEBUG print("sensors:",tasmota.read_sensors())
+  end
+
+  # display sensor value in the web UI 
+  def web_sensor()
+    import string
+    var msg = string.format(
+            "{s}USB{m}%.1f V{e}"
+            "{s}Super Capacitor{m}%.1f V{e}",
+             self.vusb, self.vcap )
+
+    tasmota.web_send_decimal(msg)
+  end
+
+
+  #- add sensor value to teleperiod -#
+  # Looks like this one prevents "Tele#Sensor#......" 
+  # to be triggered so leave it as comment for now
+  def json_append()
+    if !self.vusb return nil end 
+    if !self.vcap return nil end 
+    import string
+    var msg = string.format(',"vsub":%i, "vcap":%i }', int(self.vusb*1000), int(self.vcap*1000))
+#    print(msg)
+#    tasmota.response_append(msg)
+  end
+
+end
+
+teleinfo = TELEINFO()
+tasmota.add_driver(teleinfo)
+
diff --git a/raw/esp32c6/Winky/cp2fs.be b/raw/esp32c6/Winky/cp2fs.be
new file mode 100644
index 00000000..5d2e6dc5
--- /dev/null
+++ b/raw/esp32c6/Winky/cp2fs.be
@@ -0,0 +1,34 @@
+# Copy teleinfo driver to file system to be end user editable
+
+# simple function to copy from autoconfig archive to filesystem
+# return true if ok
+def cp(from, to)
+  import path
+  if to == nil    to = from   end     # to is optional
+  tasmota.log("OTA: copying "+tasmota.wd + to, 2)
+  if !path.exists(to)
+    try
+      # tasmota.log("f_in="+tasmota.wd + from)
+      var f_in = open(tasmota.wd + from)
+      var f_content = f_in.readbytes()
+      f_in.close()
+      var f_out = open(to, "w")
+      f_out.write(f_content)
+      f_out.close()
+    except .. as e,m
+      tasmota.log("OTA: Couldn't copy "+to+" "+e+" "+m,2)
+      return false
+    end
+    return true
+  end
+  return true
+end
+
+import path
+
+# copy some samples files from autoconf 
+# to filesystem for end user speed up learn
+cp("_autoexec.be", "autoexec.be")
+cp("_teleinfo.be", "teleinfo.be")
+
+# Done
diff --git a/raw/esp32c6/Winky/init.bat b/raw/esp32c6/Winky/init.bat
new file mode 100644
index 00000000..cfebc8a2
--- /dev/null
+++ b/raw/esp32c6/Winky/init.bat
@@ -0,0 +1,26 @@
+Br load("Winky.autoconf#cp2fs.be")
+Template {"NAME":"Winky","GPIO":[1,4704,1376,4705,5632,4706,640,608,1,32,1,0,0,0,0,0,0,0,1,1,1,1,1,4096,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
+Module 0
+
+; All these parameters are saved onto flash device
+; so once configured, you can change them afterward
+; in the file autoexec.be copied onto the filesystem
+; =====================================================
+
+; Disable Boot Loop Detection
+SetOption65 1
+
+; Set Telemetry to 11s (to remove 10s deepsleep)
+TelePeriod 11
+
+; # Set auto timezone
+Backlog0 Timezone 99; TimeStd 0,0,10,1,3,60; TimeDst 0,0,3,1,2,120
+
+; # Set Teleinfo in legacy (historique) mode at 1200 baud.
+EnergyConfig Historique	
+
+; # Enable sending of all frames in raw mode
+EnergyConfig Full	
+
+; # Send only each 1 on 10 frames received
+EnergyConfig Skip 9