Ansible Playbook Error

[glockdd]

Expected Behavior

Running the ansible playbook should begin installing the k3s cluster on the virtual machines listed in the host.ini file.

Current Behavior

Instead, when I run the ansible playbook I get an error: 'argument_specs' is not a valid attribute for a RoleMetadata. I have tried to follow the procedure in the video several times by applying it to my system but it doesn't work.

Steps to Reproduce

1. Install Ansible
2. Install Ansible requirements
3. Download the repository
4. Create the copy of the example / default file
5. Compile the host.ini file along side with inventory/my-cluster/group_vars/all.yml and site.yml
6. Run the playbook ("ansible-playbook site.yml -i inventory/my-cluster/hosts.ini")

ERROR! 'argument_specs' is not a valid attribute for a RoleMetadata

The error appears to be in '/home/francesco/kubernetes/k3s-ansible/roles/lxc/meta/main.yml': line 2, column 1, but may
be elsewhere in the file depending on the exact syntax problem.

The offending line appears to be:

---

argument_specs:
^ here

Context (variables)

Operating system: windows ubuntu wsl

Hardware: i7-13700k, 32gb DDR5, rtx 2070, 1tb 990 pro

Variables Used

all.yml

---
k3s_version: v1.30.2+k3s2
# this is the user that has ssh access to these machines
ansible_user: francesco
systemd_dir: /etc/systemd/system

# Set your timezone
system_timezone: Europe/Rome

# interface which will be used for flannel
flannel_iface: eth0

# uncomment calico_iface to use tigera operator/calico cni instead of flannel https://docs.tigera.io/calico/latest/about
# calico_iface: "eth0"
calico_ebpf: false # use eBPF dataplane instead of iptables
calico_tag: v3.28.0 # calico version tag

# uncomment cilium_iface to use cilium cni instead of flannel or calico
# ensure v4.19.57, v5.1.16, v5.2.0 or more recent kernel
# cilium_iface: "eth0"
cilium_mode: native # native when nodes on same subnet or using bgp, else set routed
cilium_tag: v1.16.0 # cilium version tag
cilium_hubble: true # enable hubble observability relay and ui

# if using calico or cilium, you may specify the cluster pod cidr pool
cluster_cidr: 10.52.0.0/16

# enable cilium bgp control plane for lb services and pod cidrs. disables metallb.
cilium_bgp: false

# bgp parameters for cilium cni. only active when cilium_iface is defined and cilium_bgp is true.
cilium_bgp_my_asn: "64513"
cilium_bgp_peer_asn: "64512"
cilium_bgp_peer_address: 192.168.30.1
cilium_bgp_lb_cidr: 192.168.31.0/24 # cidr for cilium loadbalancer ipam

# enable kube-vip ARP broadcasts
kube_vip_arp: true

# enable kube-vip BGP peering
kube_vip_bgp: false

# bgp parameters for kube-vip
kube_vip_bgp_routerid: "127.0.0.1"  # Defines the router ID for the BGP server
kube_vip_bgp_as: "64513"  # Defines the AS for the BGP server
kube_vip_bgp_peeraddress: "192.168.30.1"  # Defines the address for the BGP peer
kube_vip_bgp_peeras: "64512"  # Defines the AS for the BGP peer

# apiserver_endpoint is virtual ip-address which will be configured on each master
apiserver_endpoint: 10.20.3.222

# k3s_token is required  masters can talk together securely
# this token should be alpha numeric only
k3s_token: "Mbkgi5e3++Kluster"

# The IP on which the node is reachable in the cluster.
# Here, a sensible default is provided, you can still override
# it for each of your hosts, though.
k3s_node_ip: "{{ ansible_facts[(cilium_iface | default(calico_iface | default(flannel_iface)))]['ipv4']['address'] }}"

# Disable the taint manually by setting: k3s_master_taint = false
k3s_master_taint: "{{ true if groups['node'] | default([]) | length >= 1 else false }}"

# these arguments are recommended for servers as well as agents:
extra_args: >-
  {{ '--flannel-iface=' + flannel_iface if calico_iface is not defined and cilium_iface is not defined else '' }}
  --node-ip={{ k3s_node_ip }}

# change these to your liking, the only required are: --disable servicelb, --tls-san {{ apiserver_endpoint }}
# the contents of the if block is also required if using calico or cilium
extra_server_args: >-
  {{ extra_args }}
  {{ '--node-taint node-role.kubernetes.io/master=true:NoSchedule' if k3s_master_taint else '' }}
  {% if calico_iface is defined or cilium_iface is defined %}
  --flannel-backend=none
  --disable-network-policy
  --cluster-cidr={{ cluster_cidr | default('10.52.0.0/16') }}
  {% endif %}
  --tls-san {{ apiserver_endpoint }}
  --disable servicelb
  --disable traefik

extra_agent_args: >-
  {{ extra_args }}

# image tag for kube-vip
kube_vip_tag_version: v0.8.2

# tag for kube-vip-cloud-provider manifest
# kube_vip_cloud_provider_tag_version: "main"

# kube-vip ip range for load balancer
# (uncomment to use kube-vip for services instead of MetalLB)
# kube_vip_lb_ip_range: "192.168.30.80-192.168.30.90"

# metallb type frr or native
metal_lb_type: native

# metallb mode layer2 or bgp
metal_lb_mode: layer2

# bgp options
# metal_lb_bgp_my_asn: "64513"
# metal_lb_bgp_peer_asn: "64512"
# metal_lb_bgp_peer_address: "192.168.30.1"

# image tag for metal lb
metal_lb_speaker_tag_version: v0.14.8
metal_lb_controller_tag_version: v0.14.8

# metallb ip range for load balancer
metal_lb_ip_range: 10.20.3.230-10.20.3.250

# Only enable if your nodes are proxmox LXC nodes, make sure to configure your proxmox nodes
# in your hosts.ini file.
# Please read https://gist.github.com/triangletodd/02f595cd4c0dc9aac5f7763ca2264185 before using this.
# Most notably, your containers must be privileged, and must not have nesting set to true.
# Please note this script disables most of the security of lxc containers, with the trade off being that lxc
# containers are significantly more resource efficient compared to full VMs.
# Mixing and matching VMs and lxc containers is not supported, ymmv if you want to do this.
# I would only really recommend using this if you have particularly low powered proxmox nodes where the overhead of
# VMs would use a significant portion of your available resources.
proxmox_lxc_configure: false
# the user that you would use to ssh into the host, for example if you run ssh some-user@my-proxmox-host,
# set this value to some-user
proxmox_lxc_ssh_user: root
# the unique proxmox ids for all of the containers in the cluster, both worker and master nodes
proxmox_lxc_ct_ids:
  - 200
  - 201
  - 202
  - 203
  - 204

# Only enable this if you have set up your own container registry to act as a mirror / pull-through cache
# (harbor / nexus / docker's official registry / etc).
# Can be beneficial for larger dev/test environments (for example if you're getting rate limited by docker hub),
# or air-gapped environments where your nodes don't have internet access after the initial setup
# (which is still needed for downloading the k3s binary and such).
# k3s's documentation about private registries here: https://docs.k3s.io/installation/private-registry
custom_registries: false
# The registries can be authenticated or anonymous, depending on your registry server configuration.
# If they allow anonymous access, simply remove the following bit from custom_registries_yaml
#   configs:
#     "registry.domain.com":
#       auth:
#         username: yourusername
#         password: yourpassword
# The following is an example that pulls all images used in this playbook through your private registries.
# It also allows you to pull your own images from your private registry, without having to use imagePullSecrets
# in your deployments.
# If all you need is your own images and you don't care about caching the docker/quay/ghcr.io images,
# you can just remove those from the mirrors: section.
custom_registries_yaml: |
  mirrors:
    docker.io:
      endpoint:
        - "https://registry.domain.com/v2/dockerhub"
    quay.io:
      endpoint:
        - "https://registry.domain.com/v2/quayio"
    ghcr.io:
      endpoint:
        - "https://registry.domain.com/v2/ghcrio"
    registry.domain.com:
      endpoint:
        - "https://registry.domain.com"

  configs:
    "registry.domain.com":
      auth:
        username: yourusername
        password: yourpassword

# On some distros like Diet Pi, there is no dbus installed. dbus required by the default reboot command.
# Uncomment if you need a custom reboot command
# custom_reboot_command: /usr/sbin/shutdown -r now

# Only enable and configure these if you access the internet through a proxy
# proxy_env:
#   HTTP_PROXY: "http://proxy.domain.local:3128"
#   HTTPS_PROXY: "http://proxy.domain.local:3128"
#   NO_PROXY: "*.domain.local,127.0.0.0/8,10.0.0.0/8,172.16.0.0/12,192.168.0.0/16"

Hosts

host.ini

[master]
10.20.3.145
10.20.3.50

[node]
10.20.3.85
10.20.3.64

# only required if proxmox_lxc_configure: true
# must contain all proxmox instances that have a master or worker node
#[proxmox]
#10.20.3.145
#10.20.3.85

[k3s_cluster:children]
master
node

Possible Solution

I don't know, i have used Ansible a a little time in my life

• [* ] I've checked the General Troubleshooting Guide

[berendt]

Which version of Ansible are you using?

[glockdd]

I am using ansible 2.10.8. I just run "sudo apt install ansible"