Skip to content

Latest commit

 

History

History
96 lines (72 loc) · 2.65 KB

sanity_check.md

File metadata and controls

96 lines (72 loc) · 2.65 KB
Raw

Sanity check procedures

The Sanity Check Procedures are the steps that a System Administrator will take to verify that an installation is ready to be tested. This is therefore a preliminary set of tests to ensure that obvious or basic malfunctioning is fixed before proceeding to unit tests, integration tests and user validation.

End to End Testing

  • Start context broker in default port (1026)
  • Run the following command
curl --header 'Accept: application/json' localhost:1026/version
  • Check that you get the version number as output (along with uptime information and compilation environment information):
{
  "orion" : {
    "version" : "1.8.0-next",
    "uptime" : "0 d, 0 h, 2 m, 30 s",
    "git_hash" : "c49692a996fb8d23cb2e78992094e26b1ca45dac",
    "compile_time" : "Wed Sep 27 16:56:16 CEST 2017",
    "compiled_by" : "fermin",
    "compiled_in" : "debvm",
    "release_date" : "Wed Sep 27 16:56:16 CEST 2017",
    "doc" : "https://fiware-orion.rtfd.io/"
  }
}

Top

List of Running Processes

A process named "contextBroker" should be up and running, e.g.:

$ ps ax | grep contextBroker
 8517 ?        Ssl    8:58 /usr/bin/contextBroker -port 1026 -logDir /var/log/contextBroker -pidpath /var/log/contextBroker/contextBroker.pid -dbhost localhost -db orion

Top

Network Interfaces Up and Open

Orion Context Broker uses TCP 1026 as default port, although it can be changed using the -port command line option.

Top

Databases

The Orion Context Broker uses a MongoDB database, whose parameters are provided using the command line options:

  • -dbhost
  • -db
  • -dbuser
  • -dbpwd
  • -dbAuthMech
  • -dbAuthDb
  • -dbSSL

Note that -dbuser, -dbpwd, -dbAuthMech and -dbAuthDb. are only used if MongoDB runs using authentication, i.e. with --auth.

You can check that the database is working using the mongo console:

mongo <dbhost>/<db>

You can check the different collections used by the broker using the following commands in the mongo console. However, note that the broker creates a collection the first time a document is to be inserted in it, so if it is the first time you run the broker (or if database was cleaned) and the broker hasn't received any request yet no collection exists. Use show collections to get the actual collections list in any given moment.

> db.registrations.count()
> db.entities.count()
> db.csubs.count()
> db.casubs.count()

Top