DISCLAIMER: The Booster docs are undergoing an overhaul. Most of what's written here applies, but expect some hiccups in the build process that is described here, as it changed in the last version. New documentation will have this documented properly.
Thanks for taking the time to contribute to Booster. It is an open-source project and it wouldn't be possible without people like you 🙏🎉
This document is a set of guidelines to help you contribute to Booster, which is hosted on the boostercloud GitHub
organization. These aren’t absolute laws, use your judgment and common sense 😀.
Remember that if something here doesn't make sense, you can also propose a change to this document.
- Code of Conduct
- I don't want to read this whole thing, I just have a question!!!
- What should I know before I get started?
- How Can I Contribute?
- Your First Code Contribution
- Code Style Guidelines
This project and everyone participating in it are expected to uphold the Booster's Code of Conduct, based on the Covenant Code of Conduct.
If you see unacceptable behavior, please communicate so to [email protected].
Go ahead and ask the community in Discord or create a new issue.
Booster is divided in many different packages. The criteria to split the code in packages is that each package meets at least one of the following conditions:
- They must be run separately, for instance, the CLI is run locally, while the support code for the project is run on the cloud.
- They contain code that is used by at least two of the other packages.
- They're a vendor-specific specialization of some abstract part of the framework (for instance, all the code that is required by AWS is in separate packages).
The packages are managed using rush and npm, if you run rush build, it will build all the packages.
The packages are published to npmjs under the prefix @boostercloud/, their purpose is as follows:
cli- You guessed it! This package is theboostcommand-line tool, it interacts only with the core package in order to load the project configuration. The specific provider packages to interact with the cloud providers are loaded dynamically from the project config.framework-core- This one contains all the framework runtime vendor-independent logic. Stuff like the generation of the config or the commands and events handling happens here. The specific provider packages to interact with the cloud providers are loaded dynamically from the project config.framework-integration-tests- Implements integration tests for all supported vendors. Tests are run on real infrastructure using the same mechanisms than a production application. This packagesrcfolder includes a synthetic Booster application that can be deployed to a real provider for testing purposes.framework-provider-aws- Implements all the required adapters to make the booster core run on top of AWS technologies like Lambda and DynamoDB using the AWS SDK under the hoods.framework-provider-aws-infrastructure- Implements all the required adapters to allow Booster applications to be deployed to AWS using the AWS CDK under the hoods.framework-provider-local- Implements all the required adapters to run the Booster application on a local express server to be able to debug your code before deploying it to a real cloud provider.framework-provider-local-infrastructure- Implements all the required code to run the local development server.framework-types- This package defines types that the rest of the project will use. This is useful for avoiding cyclic dependencies. Note that this package should not contain stuff that are not types, or very simple methods related directly to them, i.e. a getter or setter. This package defines the main booster concepts like:- Entity
- Command
- etc…
This is a dependency graph that shows the dependencies among all packages, including the application using Booster:
Contributing to an open source project is never just a matter of code, you can help us significantly by just using Booster and interacting with our community. Here you'll find some tips on how to do it effectively.
Before creating a bug report, please search for similar issues to make sure that they're not already reported. If you don't find any, go ahead and create an issue including as many details as possible. Fill out the required template, the information requested helps us to resolve issues faster.
Note: If you find a Closed issue that seems related to the issues that you're experiencing, make sure to reference it in the body of your new one by writing its number like this => #42 (Github will autolink it for you).
Bugs are tracked as GitHub issues. Explain the problem and include additional details to help maintainers reproduce the problem:
- Use a clear and descriptive title for the issue to identify the problem.
- Describe the exact steps which reproduce the problem in as many details as possible.
- Provide specific examples to demonstrate the steps. Include links to files or GitHub projects, or copy/pasteable snippets, which you use in those examples. If you're providing snippets in the issue, use Markdown code blocks.
- Describe the behavior you observed after following the steps and point out what exactly is the problem with that behavior.
- Explain which behavior you expected to see instead and why.
- If the problem is related to performance or memory, include a CPU profile capture with your report.
Enhancement suggestions are tracked as GitHub issues. Make sure you provide the following information:
- Use a clear and descriptive title for the issue to identify the suggestion.
- Provide a step-by-step description of the suggested enhancement in as many details as possible.
- Provide specific examples to demonstrate the steps. Include copy/pasteable snippets which you use in those examples, as Markdown code blocks.
- Describe the current behavior and explain which behavior you expected to see instead and why.
- Explain why this enhancement would be useful to most Booster users and isn't something that can or should be implemented as a community package.
- List some other libraries or frameworks where this enhancement exists.
Booster documentation is treated as a live document that continues improving on a daily basis. If you find something that is missing or can be improved, please contribute, it will be of great help for other developers. To contribute you can use the button "Edit on github" at the top of each chapter.
The ultimate goal of a technical document is to translate the knowledge from the technology creators into the reader's mind so that they learn. The challenging part here is the one in which they learn. It is challenging because, under the same amount of information, a person can suffer an information overload because we (humans) don't have the same information-processing capacity. That idea is going to work as our compass, it should drive our efforts so people with less capacity is still able to follow and understand our documentation.
To achieve our goal we propose writing documentation following these principles:
- Clean and Clear
- Simple
- Coherent
- Explicit
- Attractive
- Inclusive
- Cohesive
1. Clean and Clear
Less is more. Apple is, among many others, a good example of creating clean and clear content, where visual elements are carefully chosen to look beautiful (e.g. Apple's swift UI) and making the reader getting the point as soon as possible.
The intention of every section, paragraph, and sentence must be clear, we should avoid writing details of two different things even when they are related. It is better to link pages and keep the focus and the intention clear, Wikipedia is the best example on this.
2. Simple
Technical writings deal with different backgrounds and expertise from the readers. We should not assume the reader knows everything we are talking about but we should not explain everything in the same paragraph or section. Every section has a goal to stick to the goal and link to internal or external resources to go deeper.
Diagrams are great tools, you know a picture is worth more than a thousand words unless that picture contains too much information. Keep it simple intentionally omitting details.
3. Coherent
The documentation tells a story. Every section should integrate naturally without making the reader switch between different contexts. Text, diagrams, and code examples should support each other without introducing abrupt changes breaking the reader’s flow. Also, the font, colors, diagrams, code samples, animations, and all the visual elements we include, should support the story we are telling.
4. Explicit
Go straight to the point without assuming the readers should know about something. Again, link internal or external resources to clarify.
The index of the whole content must be visible all the time so the reader knows exactly where they are and what is left.
5. Attractive
Our text must be nice to read, our diagrams delectable to see, and our site… a feast for the eyes!!
6. Inclusive
Everybody should understand our writings, especially the topics at the top. We have arranged the documentation structure in a way that anybody can dig deeper by just going down so, sections 1 to 4 must be suitable for all ages.
Use gender-neutral language to avoid the use of he, him, his to refer to undetermined gender. It is better to use their or they as a gender-neutral approach than s/he or similars.
7. Cohesive
Writing short and concise sentences is good, but remember to use proper connectors (“Therefore”, “Besides”, “However”, “thus”, etc) that provide a sense of continuation to the whole paragraph. If not, when people read the paragraphs, their internal voice sounds like a robot with unnatural stops.
For example, read this paragraph and try to hear your internal voice:
Entities are created on the fly, by reducing the whole event stream. You shouldn't assume that they are stored anywhere. Booster does create automatic snapshots to make the reduction process efficient. You are the one in charge of writing the reducer function.
And now read this one:
Entities are created on the fly by reducing the whole event stream. While you shouldn't assume that they are stored anywhere, Booster does create automatic snapshots to make the reduction process efficient. In any case, this is opaque to you and the only thing you should care is to provide the reducer function.
Did you feel the difference? The latter makes you feel that everything is connected, it is more cohesive.
There are many writing styles depending on the type of document. It is common within technical and scientific writing to use Inductive and/or Deductive styles for paragraphs. They have different outcomes and one style may suit better in one case or another, that is why it is important to know them, and decide which one to use in every moment. Let’s see the difference with 2 recursive examples.
Deductive paragraphs ease the reading for advanced users but still allows you to elaborate on ideas and concepts for newcomers. In deductive paragraphs, the conclusions or definitions appear at the beginning, and then, details, facts, or supporting phrases complete the paragraph’s idea. By placing the conclusion in the first sentence, the reader immediately identifies the main point so they can decide to skip the whole paragraph or keep reading. If you take a look at the structure of this paragraph, it is deductive.
On the other hand, if you want to drive the readers' attention and play with it as if they were in a roller coaster, you can do so by using a different approach. In that approach, you first introduce the facts and ideas and then you wrap them with a conclusion. This style is more narrative and forces the reader to continue because the main idea is diluted in the whole paragraph. Once all the ideas are placed together, you can finally conclude the paragraph. This style is called Inductive.
The first paragraph is deductive and the last one is inductive. In general, it is better to use the deductive style, but if we stick to one, our writing will start looking weird and maybe boring. So decide one or another being conscious about your intention.
Click here to start making contributions to Booster.
Unsure where to begin contributing to Booster? You can start by looking through issued tagged as good-first-issue and help-wanted:
- Beginner issues - issues which should only require a few lines of code, and a test or two.
- Help wanted issues - issues which should be a bit more involved than beginner issues.
Both issue lists are sorted by the total number of comments. While not perfect, number of comments is a reasonable proxy for impact a given change will have.
Make sure that you assign the chosen issue to yourself to communicate your intention to work on it and reduce the possibilities of other people taking the same assignment.
To start contributing to the project you would need to set up the project in your system, to do so, you must first follow these steps in your terminal.
-
Install Rush:
npm install -g @microsoft/rush -
Clone the repo and get into the directory of the project:
git clone <WRITE REPO URL HERE> && cd booster -
Install project dependencies:
rush update -
Compile the project
rush build -
Add your contribution
-
Make sure everything works by executing the unit tests:
rush rest
DISCLAIMER: The integration test process changed, feel free to chime in into our Discord for more info
- Make sure everything works by running the integration tests:
rush pack-integration-deps
cd packages/framework-integration-tests
rushx integration -vThe Booster Framework project is organized following the "rush monorepo" structure. There are several "package.json" files and each one has its purpose with regard to the dependencies you include on them:
- The "package.json" files that are on each package root should contain the dependencies used by that specific package. Be sure to correctly differentiate which dependency is only for development and which one is for production.
Finally, always use exact numbers for dependency versions. This means that if you want to add the dependency "aws-sdk" in version 1.2.3, you should add "aws-sdk": "1.2.3" to the corresponding "package.json" file, and never "aws-sdk": "^1.2.3" or "aws-sdk": "~1.2.3". This restriction comes from hard problems we've had in the past.
Unit tests are executed when you type rush test. If you want to run the unit tests for a specific package, you should move to the corresponding package folder and run rushx test there.
Integration tests are triggered by repo admins to be run in Github Actions by commenting
/integration sha=1234ab
Where 1234ab is the SHA of the latest commit.
Still, it is recommendable to run them locally before submitting a PR for review. You can find several scripts in packages/framework-integration-tests/package.json to run different test suites. You can run them using rush tool:
rushx <script name> -v
These are the available scripts to run integration tests:
rushx integration -v: Run all the integration test suites in the right order.rushx integration/aws-deploy -v: This test just checks that the sample project inpackages/framework-integration-tests/srccan be successfully deployed to AWS. The deployment process takes several minutes and this project is used by all the other AWS integration tests, so it's a requirement to run this test before.rushx integration/aws-func -v: AWS functional integration tests. They stress the deployed app write API and checks that the results are the expected ones both in the databases and the read APIs.rushx integration/end-to-end -v: Runs complete and realistic use cases on several cloud providers. This tests are intended to verify that a single project can be deployed to different cloud providers. Currently, only AWS is implemented though.rushx integration/aws-nuke -v: This test checks that the application deployed to AWS can be properly nuked. This test should be the last one after other test suites related to AWS have finished.rushx integration/local -v: Checks that the test application can be launched locally and that the APIs and the databases behave as expected.rushx integration/cli -v: Checks cli commands and check that they produce the expected results.
AWS integration tests are run in real AWS resources, so you'll need to have your AWS credentials properly set in your development machine. By default, the sample project will be deployed to your default account. Basically, if you can deploy a Booster project to AWS, you should be good to go (See more details about setting up an AWS account in the docs). Notice that while all resources used by Booster are included in the AWS free tier, running these tests in your own AWS account could incur in some expenses.
The preferred way of accepting contributions is following the Github flow, that is, you fork the project and work in your own branch until you're happy with the work, and then submit a PR in Github.
Make sure that you describe your change thoroughly in the PR body, adding references for any related issues and links to any resource that helps clarifying the intent and goals of the change.
When you submit a PR to the Booster repository:
- Unit tests will be automatically run. PRs with non-passing tests can't be merged.
- If tests pass, your code will be reviewed by at least two people from the core team. Clarifications or improvements might be asked, and they reserve the right to close any PR that do not meet the project quality standards, goals or philosophy, so it's always a good idea to discuss your plans in an issue or the Spectrum channel before committing to significant changes.
- Code must be mergeable and all conflicts solved before merging it.
- Once the review process is done, unit tests pass and conflicts are fixed, you still need to make the Integration tests check to pass. In order to do that, you need to comment
/integration sha=1234ab(where1234abis the latest commit's SHA) in the pull request. The integration tests will run. If everything went well, the bot will comment with a success, and your PR can be merged now.
Once the PR is merged, the CICD process will publish the latest changes to NPM. When this finishes, as a maintainer, make sure to create a new GitHub release in the releases page:
In the release creation screen select the "Choose a tag" dropdown, and type a tag in the format vA.B.C (e.g v1.8.0) with a version that matches the project version that has been published (you can find this info in the package.json file under any folder in the packages directory) and click on "Create new tag"
Then name the release in the same way as your newly created tag, and click on "Generate release notes".
Publish the release (not as draft!) and you're good to go.
In order to create a PR, you must create a branch from main. You should follow the GitFlow naming conventions, as detailed below:
feature/*- PR that implements a new featurefix/*- PR that fixes a bugdoc/*- PR that enhances the documentation
In the right side of the branch name you can include the GitHub issue number. An example of doing this could be:
git checkout -b feature/XXX_add-an-awesome-new-feature(where XXX is the issue number)
The merge commit message should be structured following the conventional commits standard:
<commit type>([optional scope]): <description>
As an example:
fix(cli): Correct minor typos in code
The most important kind of commits are the ones that trigger version bumps and therefore a new release in the CI/CD system:
fix- patch version bump (0.0.x)feat- minor version bump (0.x.0)- Any commit type followed by
!, i.e.feat!- major version bump (x.0.0)
Apart from those previously mentioned, there are more commit types:
- build: Changes that affect the build system or external dependencies (example scopes: rush, tsconfig, npm)
- ci: Changes to our CI configuration files and scripts
- docs: Documentation only changes
- feat: A new feature
- fix: A bug fix
- perf: A code change that improves performance
- refactor: A code change that neither fixes a bug nor adds a feature
- style: Changes that do not affect the meaning of the code (white-space, formatting, missing semi-colons, etc)
- test: Adding missing tests or correcting existing tests
We're using the following scopes in the project:
- cli
- core
- types
- integration
- aws
- local
Apart of using conventional commits for triggering releases, we use them to build the project changelog.
The Booster project comes with a nice set of ESLint config files to help you follow a consistent style, and we really encourage to use it in your editor. You can also run the rush lint:fix commands to try solving any linter problems automatically.
For everything else, the rule of thumb is: Try to be consistent with the code around yours, and if you're not sure, ask :-)
There are some things that the linter doesn't force but are prefered this way:
Use import instead of require and import the objects individually when possible:
import { Object, function } from 'some-package'We give priority to a functional style of programming, but always taking into account how the objects are used to make sure they form a nice DSL. Classes are allowed when there's an actual state to hold, and we usually avoid default exports:
// module-a.ts, a conventional functional module
export functionA() {
...
}
export const someConstantA = 42// module-b.ts, grouping functions with a scope
export const ModuleB = {
functionB1: () => {...},
functionB2: () => {...},
}// object-c.ts, a class
export class ObjectC {
constructor(readonly value: number) {}
}import { functionA, someConstantA } from 'module-a'
import { ModuleB } from 'module-b'
import { ObjectC } from 'object-c'
functionA()
ModuleB.functionB1()
const obj = new ObjectC(someConstantA)Default to const and immutable objects when possible, otherwise, use let.
// Good
let a = 0
const b = 3
a = a + b
// Less Good
var c = 0
let d = 3 // Never updated