не могу понять, почему выходит ошибка при загрузке на плату #300

TommiGanT · 2024-01-28T14:49:33Z

TommiGanT
Jan 28, 2024

Привет всем, кто знает помогите, не могу понять. При компиляции ошибок не возникает. при загрузке на плату выдает следующее:
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED\src/FastLED.h:67:0,
from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED\src/fastspi.h:145:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output

pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"

Executable segment sizes:

IROM : 533028 - code in flash (default or ICACHE_FLASH_ATTR)

IRAM : 28896 / 32768 - code in IRAM (ICACHE_RAM_ATTR, ISRs...)

DATA : 1508 ) - initialized variables (global, static) in RAM/HEAP

RODATA : 4760 ) / 81920 - constants (global, static) in RAM/HEAP

BSS : 33160 ) - zeroed variables (global, static) in RAM/HEAP

Скетч использует 568192 байт (54%) памяти устройства. Всего доступно 1044464 байт.
Глобальные переменные используют 39428 байт (48%) динамической памяти, оставляя 42492 байт для локальных переменных. Максимум: 81920 байт.
esptool.py v2.8
Serial port COM4
Traceback (most recent call last):
File "C:\Users\kkabolov\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.7.4/tools/upload.py", line 65, in
esptool.main(cmdline)
File "C:/Users/kkabolov/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/2.7.4/tools/esptool\esptool.py", line 2889, in main
esp = chip_class(each_port, initial_baud, args.trace)
File "C:/Users/kkabolov/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/2.7.4/tools/esptool\esptool.py", line 237, in init
self.port = serial.serial_for_url(port)
File "C:/Users/kkabolov/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/2.7.4/tools/pyserial\serial_init.py", line 88, in serial_for_url
instance.open()
File "C:/Users/kkabolov/AppData/Local/Arduino15/packages/esp8266/hardware/esp8266/2.7.4/tools/pyserial\serial\serialwin32.py", line 62, in open
raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError()))
serial.serialutil.SerialException: could not open port 'COM4': PermissionError(13, '�� .', None, 5)
Failed uploading: uploading error: exit status 1

я в коде немного понимаю. но моих знаний на это не хватает ))
На гитхабе недавно, может не туда задал вопрос, если что извиняйте

Answered by vvip-68

Jan 28, 2024

Если что-то запрещает писать в порт - хоть 10 раз переустанавливайте библиотеки - это не поможет.
Кстати, вроде бы рекомендуемая версия FastLED для этого проекта - 3.4, у вас судя по логу стоит 3.3.2

установил в менеджере плат последнюю версию esp8266. (3.1.2)

Проект писался под версию ядра 2.7.4 и на другой работать не будет.
А если еще и IDE установлена из 2.x которая использует компилятор С++17 вместо С++11 на которой писался проект - будет куча вот этих вот предупреждений - FastLED версии меньше 3.6 несовместима с компилятором С++17

Кроме того, что нарушены все рекомендации по версиям используемых библиотек и ядра -
в любом случае - пока не разберетесь что у вас "держит" заблокирова…

View full answer

vvip-68 · 2024-01-28T14:51:45Z

vvip-68
Jan 28, 2024
Maintainer

Ну вон - английским по белому же написано - could not open port 'COM4'
Смотрите кто открыл порт, держит его открытым и не дает открыть его утилите esptool, чтобы она могла в него отправить код прошивки.

5 replies

TommiGanT Jan 28, 2024
Author

спасибо большое,

vvip-68 Jan 28, 2024
Maintainer

Выше был компорт COM4, тут COM3 - а это точно порт подключенной платы, в которую заливается прошивка или какой-то "левый", например Bluetooth или чего-нибудь еще подключенного к компу?

TommiGanT Jan 28, 2024
Author

я переподключил в другой USB порт, думал может из за этого.(сечас подключен к com4) (фото1)

в общем ничего не помогло, я заново установил все библиотеки из архива и установил в менеджере плат последнюю версию esp8266. (3.1.2). сейчас при загрузке на плату ошибок не выдает, но при этом, все равно ничего не работает. так же самотрел монитор порта он не может связаться с ним и выдает ошибку фото(фото 2).

текст который выдается :

In file included from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:14:21: note: '#pragma message: FastLED version 3.003.002'
   14 | #    pragma message "FastLED version 3.003.002"
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:48,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:60:37: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   60 |  inline void hi(register port_ptr_t port) __attribute__ ((always_inline)) { *port |= mPinMask; }
      |                                     ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:61:37: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   61 |  inline void lo(register port_ptr_t port) __attribute__ ((always_inline)) { *port &= ~mPinMask; }
      |                                     ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:62:34: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   62 |  inline void set(register port_t val) __attribute__ ((always_inline)) { *mPort = val; }
      |                                  ^~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:64:42: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   64 |  inline void fastset(register port_ptr_t port, register port_t val) __attribute__ ((always_inline)) { *port  = val; }
      |                                          ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:64:64: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   64 |  inline void fastset(register port_ptr_t port, register port_t val) __attribute__ ((always_inline)) { *port  = val; }
      |                                                                ^~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:225:44: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  225 |  inline static void hi(register port_ptr_t port) __attribute__ ((always_inline)) { }
      |                                            ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:226:44: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  226 |  inline static void lo(register port_ptr_t port) __attribute__ ((always_inline)) { }
      |                                            ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:227:41: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  227 |  inline static void set(register port_t val) __attribute__ ((always_inline)) { }
      |                                         ^~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:229:49: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  229 |  inline static void fastset(register port_ptr_t port, register port_t val) __attribute__ ((always_inline)) { }
      |                                                 ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastpin.h:229:71: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  229 |  inline static void fastset(register port_ptr_t port, register port_t val) __attribute__ ((always_inline)) { }
      |                                                                       ^~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:49,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_types.h:22:80: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   22 |   static __attribute__((always_inline)) inline uint8_t adjust(register uint8_t data) { return data; }
      |                                                                                ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_types.h:23:80: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   23 |   static __attribute__((always_inline)) inline uint8_t adjust(register uint8_t data, register uint8_t scale) { return scale8(data, scale); }
      |                                                                                ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_types.h:23:103: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   23 |   static __attribute__((always_inline)) inline uint8_t adjust(register uint8_t data, register uint8_t scale) { return scale8(data, scale); }
      |                                                                                                       ^~~~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastled_esp8266.h:3,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms.h:34,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:52,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastpin_esp8266.h:25:42: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   25 |   inline static void set(register port_t val) __attribute__ ((always_inline)) { if(PIN < 16) { _GPB._GPO = val; } else { GP16O = val; }}
      |                                          ^~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastled_esp8266.h:3,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms.h:34,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:52,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastpin_esp8266.h:31:45: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   31 |   inline static void hi(register port_ptr_t port) __attribute__ ((always_inline)) { hi(); }
      |                                             ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastpin_esp8266.h:32:45: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   32 |   inline static void lo(register port_ptr_t port) __attribute__ ((always_inline)) { lo(); }
      |                                             ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastpin_esp8266.h:33:50: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   33 |   inline static void fastset(register port_ptr_t port, register port_t val) __attribute__ ((always_inline)) { *port = val; }
      |                                                  ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastpin_esp8266.h:33:72: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   33 |   inline static void fastset(register port_ptr_t port, register port_t val) __attribute__ ((always_inline)) { *port = val; }
      |                                                                        ^~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastled_esp8266.h:4,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms.h:34,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:52,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:55:102: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   55 |  template<int BITS> __attribute__ ((always_inline)) inline static void writeBits(register uint32_t & last_mark, register uint32_t b)  {
      |                                                                                                      ^~~~~~~~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastled_esp8266.h:4,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms.h:34,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:52,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:55:131: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   55 |  template<int BITS> __attribute__ ((always_inline)) inline static void writeBits(register uint32_t & last_mark, register uint32_t b)  {
      |                                                                                                                                   ^
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h: In static member function 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::writeBits(uint32_t&, uint32_t)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:57:27: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   57 |     for(register uint32_t i = BITS; i > 0; i--) {
      |                           ^
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h: In static member function 'static uint32_t ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:76:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   76 |   register uint32_t b = pixels.loadAndScale0();
      |                     ^
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastled_esp8266.h:5,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms.h:34,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:52,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h: At global scope:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h:72:110: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   72 |   template<int BITS,int PX> __attribute__ ((always_inline)) inline static void writeBits(register uint32_t & last_mark, register Lines & b, PixelController<RGB_ORDER, LANES, PORT_MASK> &pixels) { // , register uint32_t & b2)  {
      |                                                                                                              ^~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h:72:138: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   72 |   template<int BITS,int PX> __attribute__ ((always_inline)) inline static void writeBits(register uint32_t & last_mark, register Lines & b, PixelController<RGB_ORDER, LANES, PORT_MASK> &pixels) { // , register uint32_t & b2)  {
      |                                                                                                                                          ^
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h: In static member function 'static void InlineBlockClocklessController<LANES, FIRST_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::writeBits(uint32_t&, InlineBlockClocklessController<LANES, FIRST_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::Lines&, PixelController<RGB_ORDER, LANES, (((1 << ((LANES < 6) ? LANES : 6)) - 1) & 65535)>&)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h:76:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   76 |   register uint8_t d = pixels.template getd<PX>(pixels);
      |                    ^
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h:77:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   77 |   register uint8_t scale = pixels.template getscale<PX>(pixels);
      |                    ^~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h:79:25: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   79 |   for(register uint32_t i = 0; i < USED_LANES; i++) {
      |                         ^
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_block_esp8266.h:94:25: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   94 |   for(register uint32_t i = USED_LANES; i < 8; i++) {
      |                         ^
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi.h:9,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:65,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h: At global scope:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:261:55: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  261 |  template <class D> void writeBytes(register uint8_t *data, int len) {
      |                                                       ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:306:36: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  306 |  void writeBytes(register uint8_t *data, int len) { writeBytes<DATA_NOP>(data, len); }
      |                                    ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h: In static member function 'static void AVRSoftwareSPIOutput<DATA_PIN, CLOCK_PIN, SPI_SPEED>::writeBytesValueRaw(uint8_t, int)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:231:23: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  231 |   register data_ptr_t datapin = FastPin<DATA_PIN>::port();
      |                       ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:236:25: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  236 |    register clock_ptr_t clockpin = FastPin<CLOCK_PIN>::port();
      |                         ^~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:237:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  237 |    register data_t datahi = FastPin<DATA_PIN>::hival();
      |                    ^~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:238:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  238 |    register data_t datalo = FastPin<DATA_PIN>::loval();
      |                    ^~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:239:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  239 |    register clock_t clockhi = FastPin<CLOCK_PIN>::hival();
      |                     ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:240:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  240 |    register clock_t clocklo = FastPin<CLOCK_PIN>::loval();
      |                     ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:247:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  247 |    register data_t datahi_clockhi = FastPin<DATA_PIN>::hival() | FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:248:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  248 |    register data_t datalo_clockhi = FastPin<DATA_PIN>::loval() | FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:249:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  249 |    register data_t datahi_clocklo = FastPin<DATA_PIN>::hival() & ~FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:250:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  250 |    register data_t datalo_clocklo = FastPin<DATA_PIN>::loval() & ~FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h: In member function 'void AVRSoftwareSPIOutput<DATA_PIN, CLOCK_PIN, SPI_SPEED>::writeBytes(uint8_t*, int)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:269:24: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  269 |   register clock_ptr_t clockpin = FastPin<CLOCK_PIN>::port();
      |                        ^~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:270:23: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  270 |   register data_ptr_t datapin = FastPin<DATA_PIN>::port();
      |                       ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:275:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  275 |    register data_t datahi = FastPin<DATA_PIN>::hival();
      |                    ^~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:276:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  276 |    register data_t datalo = FastPin<DATA_PIN>::loval();
      |                    ^~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:277:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  277 |    register clock_t clockhi = FastPin<CLOCK_PIN>::hival();
      |                     ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:278:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  278 |    register clock_t clocklo = FastPin<CLOCK_PIN>::loval();
      |                     ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:288:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  288 |    register data_t datahi_clockhi = FastPin<DATA_PIN>::hival() | FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:289:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  289 |    register data_t datalo_clockhi = FastPin<DATA_PIN>::loval() | FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:290:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  290 |    register data_t datahi_clocklo = FastPin<DATA_PIN>::hival() & ~FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:291:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  291 |    register data_t datalo_clocklo = FastPin<DATA_PIN>::loval() & ~FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h: In member function 'void AVRSoftwareSPIOutput<DATA_PIN, CLOCK_PIN, SPI_SPEED>::writePixels(PixelController<RGB_ORDER>)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:332:23: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  332 |   register data_ptr_t datapin = FastPin<DATA_PIN>::port();
      |                       ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:335:25: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  335 |    register clock_ptr_t clockpin = FastPin<CLOCK_PIN>::port();
      |                         ^~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:338:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  338 |    register data_t datahi = FastPin<DATA_PIN>::hival();
      |                    ^~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:339:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  339 |    register data_t datalo = FastPin<DATA_PIN>::loval();
      |                    ^~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:340:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  340 |    register clock_t clockhi = FastPin<CLOCK_PIN>::hival();
      |                     ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:341:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  341 |    register clock_t clocklo = FastPin<CLOCK_PIN>::loval();
      |                     ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:356:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  356 |    register data_t datahi_clockhi = FastPin<DATA_PIN>::hival() | FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:357:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  357 |    register data_t datalo_clockhi = FastPin<DATA_PIN>::loval() | FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:358:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  358 |    register data_t datahi_clocklo = FastPin<DATA_PIN>::hival() & ~FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi_bitbang.h:359:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  359 |    register data_t datalo_clocklo = FastPin<DATA_PIN>::loval() & ~FastPin<CLOCK_PIN>::mask();
      |                    ^~~~~~~~~~~~~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:65,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi.h: At global scope:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/fastspi.h:130:23: note: '#pragma message: No hardware SPI pins defined.  All SPI access will default to bitbanged output'
  130 | #      pragma message "No hardware SPI pins defined.  All SPI access will default to bitbanged output"
      |                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:66,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/chipsets.h:87:80: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   87 |   __attribute__((always_inline)) inline static uint8_t adjust(register uint8_t data) { return ((data>>1) | 0x80) + ((data && (data<254)) & 0x01); }
      |                                                                                ^~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/chipsets.h: In member function 'virtual void LPD6803Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_SPEED>::showPixels(PixelController<RGB_ORDER>&)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/chipsets.h:175:31: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  175 |             register uint16_t command;
      |                               ^~~~~~~
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/chipsets.h: In member function 'void P9813Controller<DATA_PIN, CLOCK_PIN, RGB_ORDER, SPI_SPEED>::writeLed(uint8_t, uint8_t, uint8_t)':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/chipsets.h:351:20: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
  351 |   register uint8_t top = 0xC0 | ((~b & 0xC0) >> 2) | ((~g & 0xC0) >> 4) | ((~r & 0xC0) >> 6);
      |                    ^~~
In file included from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/fastled_esp8266.h:4,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms.h:34,
                 from c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/FastLED.h:52,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\a_def_hard.h:413,
                 from D:\files\разное связанное с электроникой\GyverPanelWiFi-master\firmware\GyverPanelWiFi_v1.13\GyverPanelWiFi_v1.13.ino:94:
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h: In instantiation of 'static uint32_t ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>) [with int DATA_PIN = 2; int T1 = 20; int T2 = 50; int T3 = 30; EOrder RGB_ORDER = GRB; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 50; uint32_t = unsigned int]':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:41:27:   required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with int DATA_PIN = 2; int T1 = 20; int T2 = 50; int T3 = 30; EOrder RGB_ORDER = GRB; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 50]'
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:38:15:   required from here
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:76:21: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   76 |   register uint32_t b = pixels.loadAndScale0();
      |                     ^
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h: In instantiation of 'static void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::writeBits(uint32_t&, uint32_t) [with int BITS = 8; int DATA_PIN = 2; int T1 = 20; int T2 = 50; int T3 = 30; EOrder RGB_ORDER = GRB; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 50; uint32_t = unsigned int]':
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:83:22:   required from 'static uint32_t ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showRGBInternal(PixelController<RGB_ORDER>) [with int DATA_PIN = 2; int T1 = 20; int T2 = 50; int T3 = 30; EOrder RGB_ORDER = GRB; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 50; uint32_t = unsigned int]'
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:41:27:   required from 'void ClocklessController<DATA_PIN, T1, T2, T3, RGB_ORDER, XTRA0, FLIP, WAIT_TIME>::showPixels(PixelController<RGB_ORDER>&) [with int DATA_PIN = 2; int T1 = 20; int T2 = 50; int T3 = 30; EOrder RGB_ORDER = GRB; int XTRA0 = 0; bool FLIP = false; int WAIT_TIME = 50]'
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:38:15:   required from here
c:\Users\kkabolov\Documents\Arduino\libraries\FastLED/platforms/esp/8266/clockless_esp8266.h:57:27: warning: ISO C++17 does not allow 'register' storage class specifier [-Wregister]
   57 |     for(register uint32_t i = BITS; i > 0; i--) {
      |                           ^
. Variables and constants in RAM (global, static), used 40516 / 80192 bytes (50%)
║   SEGMENT  BYTES    DESCRIPTION
╠══ DATA     1740     initialized variables
╠══ RODATA   5168     constants       
╚══ BSS      33608    zeroed variables
. Instruction RAM (IRAM_ATTR, ICACHE_RAM_ATTR), used 60972 / 65536 bytes (93%)
║   SEGMENT  BYTES    DESCRIPTION
╠══ ICACHE   32768    reserved space for flash instruction cache
╚══ IRAM     28204    code in IRAM    
. Code in flash (default, ICACHE_FLASH_ATTR), used 537916 / 1048576 bytes (51%)
║   SEGMENT  BYTES    DESCRIPTION
╚══ IROM     537916   code in flash   

A fatal esptool.py error occurred: Cannot configure port, something went wrong. Original message: PermissionError(13, '�������������� � ������� ���������� �� ��������.', None, 31)esptool.py v3.0
Serial port COM4

vvip-68 Jan 28, 2024
Maintainer

Если что-то запрещает писать в порт - хоть 10 раз переустанавливайте библиотеки - это не поможет.
Кстати, вроде бы рекомендуемая версия FastLED для этого проекта - 3.4, у вас судя по логу стоит 3.3.2

установил в менеджере плат последнюю версию esp8266. (3.1.2)

Проект писался под версию ядра 2.7.4 и на другой работать не будет.
А если еще и IDE установлена из 2.x которая использует компилятор С++17 вместо С++11 на которой писался проект - будет куча вот этих вот предупреждений - FastLED версии меньше 3.6 несовместима с компилятором С++17

Кроме того, что нарушены все рекомендации по версиям используемых библиотек и ядра -
в любом случае - пока не разберетесь что у вас "держит" заблокированным COM-порт и не дает его использовать для загрузки прошивки - ничего не взлетит. Может кабель другой взять нужно?

Answer selected by TommiGanT

TommiGanT Jan 29, 2024
Author

Спасибо большое за помощь, Сейчас все работает )) Счастлив как удав...
проблема была в следующем:

не та версия Arduino IDE, поставил 1.8 все окей.
ком порт был занят по другое устройство ранне подключаемое к этому порту( скорее всего другая ардуинка)
плохой кабель
несовместимые библиотеки
не та версия ядра
В общем сейчас все прошилось работает отлично. Спасибо большое )))

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

не могу понять, почему выходит ошибка при загрузке на плату #300

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Replies: 1 comment 5 replies

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

не могу понять, почему выходит ошибка при загрузке на плату #300

TommiGanT Jan 28, 2024

pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"

Replies: 1 comment · 5 replies

vvip-68 Jan 28, 2024 Maintainer

TommiGanT Jan 28, 2024 Author

vvip-68 Jan 28, 2024 Maintainer

TommiGanT Jan 28, 2024 Author

vvip-68 Jan 28, 2024 Maintainer

TommiGanT Jan 29, 2024 Author

TommiGanT
Jan 28, 2024

Replies: 1 comment 5 replies

vvip-68
Jan 28, 2024
Maintainer

TommiGanT Jan 28, 2024
Author

vvip-68 Jan 28, 2024
Maintainer

TommiGanT Jan 28, 2024
Author

vvip-68 Jan 28, 2024
Maintainer

TommiGanT Jan 29, 2024
Author