Skip to content

Latest commit

 

History

History
170 lines (128 loc) · 6.69 KB

README.md

File metadata and controls

170 lines (128 loc) · 6.69 KB

wpex: WireGuard Packet Relay

wpex is a relay server designed for WireGuard, facilitating NAT traversal without compromising the end-to-end encryption of WireGuard.

Features

  • The relay server can't tamper the encryption by any means.
  • Works transparently with vanilla WireGuard setups, no extra software required.
  • Zero MTU overhead.

Why wpex

Commonly, there are three approaches for WireGuard NAT traversal relay. The first is using a traditional NAT traversal relay, like TURN or DERP protocol. However, the downside to this method is that it requires you to install a TURN or DERP client on your WireGuard peers, which might be impossible or undesirable for some.

The second solution is hub-and-spoke style IP forwarding, where the cloud server is also a WireGuard peer. In this setup, packets are decrypted and forwarded on the cloud, which, unfortunately, exposes unencrypted data in the cloud server.

The third solution is tunneling, wherein a tunnel is established between the WireGuard peer and the cloud server to transmit encrypted WireGuard packets. The caveat here is that, like all tunnels, there are MTU overheads. And you have to be cautious about the isolation between the tunnel network and the WireGuard network.

wpex is engineered to overcome all these issues. It doesn't require any software or agent installation on the WireGuard peer side, making it compatible with any device running WireGuard. Moreover, wpex is designed in such a way that it's not possible to decrypt nor tamper with the encryption of WireGuard, ensuring the integrity of end-to-end encryption. And, with wpex, there are no MTU overheads. You can read How wpex Works to learn about the magic behind wpex.

Installation

Using Docker:

Fetch and run the wpex Docker image with:

docker run -d -p 40000:40000/udp ghcr.io/weiiwang01/wpex:latest --broadcast-rate 3

See Protections for more information on the --broadcast-rate flag.

Using Pre-built Binaries:

You can download pre-built binaries directly from the releases page.

Building from Source:

Ensure you have Go 1.21 or later, then run:

go install github.com/weiiwang01/wpex@latest

Usage

If you wish to connect multiple WireGuard peers behind NAT via a wpex server (e.g., at wpex.test:40000), follow these steps:

  1. Update all WireGuard peers' endpoint configurations to point to the wpex server.
  2. Enable the PersistentKeepalive setting, if the peer is behind a NAT.

Example for Peer A:

[Interface]
PrivateKey = aaaaa...

[Peer]
PublicKey = BBBBB...
Endpoint = wpex.test:40000
PersistentKeepalive = 25

Example for Peer B:

[Interface]
PrivateKey = bbbbb...

[Peer]
PublicKey = AAAAA...
Endpoint = wpex.test:40000
PersistentKeepalive = 25

And that's done, Peer A and Peer B should now connect, and wpex will automatically relay their traffic.

Protections Against Amplification Attacks

The design principle behind wpex is to know as little as possible about the WireGuard connections. If it knows nothing, it can't leak anything. By default, wpex is unaware of any information regarding incoming connections, making it vulnerable to DoS and amplification attacks when operating in an untrusted network.

The most rudimentary protection is the --broadcast-limit, which will limit the rate of amplified packets.

To calculate an ideal broadcast rate limit, use the following formula: given N represents the number of WireGuard peers connecting to the server, and K denotes the number of WireGuard peer-to-peer pairs formed from all peers, the theoretical maximum rate of broadcast is (N - 1) * K * 2 / 5. Set this value as the broadcast rate for your wpex instance to ensure safe operation.

The effectiveness of the broadcast rate limit's protection will only be realized if set to a sufficiently low value, for example, less than 5. This setting may not be viable if a larger number of peers are interconnected.

In that case, for best protection, instead of a broadcast rate limit, you can provide an allowed list of WireGuard public keys to the wpex server, which will block any connection attempts from anyone not aware of the public keys. This doesn't affect the integrity of the E2E encryption, as only the public keys (not the associated private keys) are known to the wpex server.

Examples of using public keys:

docker run -d -p 40000:40000/udp ghcr.io/weiiwang01/wpex:latest \
  --allow AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= \
  --allow BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB=
wpex --allow AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA= \
  --allow BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB=

How wpex Works

Within each WireGuard session, every peer in the session selects a random 32-bit index to identify themselves within that session. wpex operates by learning the associated endpoint address of each index, and forwarding packet based on the receiver index in the message.

For the initial handshake message, which lacks a receiver index, wpex broadcasts the handshake initiation to all known endpoints. Only the correct peer will respond with a handshake response message, while the others will just discard the packet. This broadcasting mechanism, however, poses a significant vulnerability as it can be exploited for amplification attacks. Attackers can create fake handshake initiation messages with the source address spoofed to the victim's, easily causing an attack with an amplification factor of thousands.

This is where public keys come to the rescue. By knowing the public keys of all peers, it's possible to verify the mac1 value within the handshake initiation and handshake response messages. However, merely validating the mac1 is inadequate since it doesn't provide resistance to replay attacks as the timestamp in handshake messages cannot be decrypted without the private key.

To mitigate this, whenever there's a handshake initiation from new endpoint, wpex sends a pseudo cookie reply to the originating endpoint. A structurally valid cookie reply can be generated using only the public key. The new endpoint, based on WireGuard protocol, in turn, will react with a new handshake initiation with the correct mac2 value, derived from the cookie reply sent earlier. Upon receipt of this, it's affirmed that the new endpoint is legitimate, and it's then added to the list of known endpoints. This mechanism effectively counters replay attacks as each cookie reply generated is unique. The mac2 value in that handshake initiation message will be striped before forwarding since the cookie is generated by wpex and not by the actual peer.