Update mainboard.md

1coderookie · Mar 30, 2024 · a79e7d6 · a79e7d6
1 parent 0949134
commit a79e7d6
Showing 1 changed file with 5 additions and 5 deletions.
diff --git a/docs/hardware/mainboard.md b/docs/hardware/mainboard.md
@@ -367,9 +367,9 @@ The following table shows the wiring/connections according to *my* `printer.cfg`
 |:-----|:----------|:--------------|:---------------|
 | Probe / ABL sensor | E-CON: LEVEL | BLTOUCH | PA8 |
 | Acceleration sensor <br> Printhead = X <br> E-CON | E-CON: MOSI <br> E-CON: MISO <br> E-CON: SCLK <br> E-CON: CS <br> E-CON: 5V | EXP2: SPI1_MOSI <br> EXP2: SPI1_MISO <br> EXP2: SPI1_SCK <br> EXP2: SPI1_CS <br> BLTOUCH: 5V | PA7 <br> PA6 <br> PA5 <br> PE10 <br> (BLTOUCH: 5V) |            
-| Acceleration sensor <br> Bed = Y <br> ACC-SENSOR | ACC-SENSOR: MOSI <br> ACC-SENSOR: MISO <br> ACC-SENSOR: SCLK <br> ACC-SENSOR: CS <br> ACC-SENSOR: 5V <br> ACC-SENSOR: GND | EXP2: SPI1_MOSI <br> EXP2: SPI1_MISO <br> EXP2: SPI1_SCK <br> EXP2: BTN_EN2 <br> EXP2: 5V <br> J5 -> 24V **-** | PA7 <br> PA6 <br> PA5 <br> PE11 <br> (BLTOUCH: 5V) <br> (J5 -> 24V **-**) | 
-| Printhead's 24V main | E-CON: 24V | J5 -> 24V **+** | (J5 -> 24V **+**) |
-| Printhead's GND main | E-CON: GND | J5 -> 24V **-** | (J5 -> 24V **-**) |
+| Acceleration sensor <br> Bed = Y <br> ACC-SENSOR | ACC-SENSOR: MOSI <br> ACC-SENSOR: MISO <br> ACC-SENSOR: SCLK <br> ACC-SENSOR: CS <br> ACC-SENSOR: 5V <br> ACC-SENSOR: GND | EXP2: SPI1_MOSI <br> EXP2: SPI1_MISO <br> EXP2: SPI1_SCK <br> EXP2: BTN_EN2 <br> BLTOUCH: 5V <br> J5 --> 24V **-** | PA7 <br> PA6 <br> PA5 <br> PE11 <br> (BLTOUCH: 5V) <br> (J5 --> 24V **-**) | 
+| Printhead's 24V main | E-CON: 24V | J5 --> 24V **+** | (J5 --> 24V **+**) |
+| Printhead's GND main | E-CON: GND | J5 --> 24V **-** | (J5 --> 24V **-**) |
 | Part Cooling Fan | E-CON: F0 | FAN1 | PC14 | 
 | Heatsink Cooling Fan | E-CON: F1 | FAN2 | PB1 |
 | Thermistor Hotend | E-CON: T0 | TH1 | PC1 |
@@ -378,15 +378,15 @@ The following table shows the wiring/connections according to *my* `printer.cfg`
 | Filament Runout Sensor | X-CON: FILAMENT/GND | MT_DET1 PA4/GND | !PA4 |  
 | X Limit Switch | X-CON: X LIMIT/GND | X PA15/GND | !PA15 |
 | Y Limit Switch | Y-CON: LIMIT/GND | Y PD2/GND | !PD2 |    
-| Mainboard Cooling Fan | MB-FAN +/- | J4 -> 24V +/- | (J4 -> 24V +/-) |
+| Mainboard Cooling Fan | MB-FAN +/- | J4 --> 24V +/- | (J4 --> 24V +/-) |
 | Z-Offset Sensor | CALIBRATION S/GND | Z+ PC4/GND | ^PC4 |
 | Thermistor Bed | T1 & GND | TB1 | PC0 | 
 | Heater Bed | HOTBED +/- | H-BED +/- | PA0 |
 | Extruder Motor | E-CON: A1/A2/B1/B2 | E0-MOTOR: 1A/1B/2A/2B | step: PD6 / dir: PD3 / enable: !PB3 / uart: PD9 |
 | X-Axis Motor | X-CON: A1/A2/B1/B2 | X-MOTOR: 1A/1B/2A/2B | step: PE3 / dir: PE2 / enable: !PE4 / uart: PD5 |
 | Y-Axis Motor | Y-CON: A1/A2/B1/B2 | Y-MOTOR: 1A/1B/2A/2B | step: PE0 / dir: PB9 / enable: !PE1 / uart: PD7 |
 | Z-Axis Motor | ZL/ZR: A1/A2/B1/B2 | Z1-MOTOR: 1A/1B/2A/2B | step: PB5 / dir: PB4 / enable: !PB8 / uart: PD4 |  
-  
+
 
 ---