Skip to content
forked from rsheldiii/KeyV2

KeyV2: A Parametric Mechanical Keycap Library

License

Notifications You must be signed in to change notification settings

AhmetBilgin/KeyV2

 
 

Repository files navigation

Parametric Mechanical Keycap Library

a slightly askew welcome picture

This library is a keycap and keyset construction library for mechanical keyboards, written in openSCAD.

Relevant links:

How to run

OpenSCAD Proper (recommended way)

If you are technically inclined at all, this is definitely the best way to run the code. It's not very hard!

First, you'll need OpenSCAD: http://www.openscad.org/downloads.html. I highly recommend installing the development snapshot, as they generally support more features and are relatively stable. Development snapshots are listed in their own section on the downloads page.

After you have openSCAD installed, you need to download the code and run it. running git clone https://github.com/rsheldiii/openSCAD-projects.git if you have git, or downloading this zip and extracting the directory should do it. Then all you need to do is open keys.scad with openSCAD and you are set! It is possible to edit this project with an external editor by checking off Design => 'Automatic Reload and Preview' in OpenSCAD.

All examples below assume you are running the library on your computer with OpenSCAD.

OpenSCAD Customizer

If you're not technically inclined enough to start programming in OpenSCAD (it's easier than you think), you can look into getting OpenSCAD's customizer working.

customizer.scad is auto-generated from the other files in this repository due to a quirk with how OpenSCAD shows customizer settings. It should be perpetually kept up to date, but there may be some bugs. feel free to open an issue if you find one!

Thingiverse Customizer

The easiest and buggiest way to run this program is to boot it up in Thingiverse's Customizer. Explanations of each option are provided, as well as some default variables. Twiddle the variables to see how the keycap changes!

Unfortunately I don't think I can update the Thingiverse customizer without breaking it, so you don't get all the cool new features I've been developing over the past couple years.

High-level overview

This library supports Cherry and Alps switches, and has pre-defined key profiles for SA, DSA, DCS, G20, Hi-Pro and (some form of) OEM keycaps. keys.scad is the entry point for everything but the most technical use. Pre-programmed key profiles can be found in the key_profiles directory.

Every key starts with default settings (provided in settings.scad) that are overridden by each function call. The simplest key you can make would be:

key();

a bog-standard cherry key

which is a bog-standard DCS row 5 (number / function row) keycap. To change how the key is generated, you can modify the settings directly or add predefined modifier functions like so:

// directly modified setting
$stem_inset = 1;
// settings changed through modifier function
sa_row(2) 2u() key();

You can chain as many modifier functions as you like!

a 2 unit SA row 2 cherry key

Modifier functions

There is a bevy of supporting functions to customize your keycaps. You can add a brim to more easily print the stem with brimmed_stem_support, make 2x2 keycaps with 2u() 2uh(), add legends, rotate stems, and more. All these functions manipulate the settings available to you in settings.scad, though some of them are quite complex.

These modifier functions can be found in key_profiles/ for different keycap profiles, key_types.scad for predefined settings for common keys (spacebar, left shift, etc), key_sizes.scad for common unit sizes, and key_transformations.scad for everything else. I encourage you to do some sleuthing but for a list of (most) helper functions with explanations, Check out the wiki!

These modifier functions may not cover every use case; in that case, you may have to write some SCAD yourself.

Layouts

new to the library and still in a beta state, layouts allows you to generate an entire layout for a keyboard!

It is recommended to use tined stem support and set $extra_long_stem_support = true if you plan on printing these keycaps.

60_percent_default("dcs") key();

a standard 60 percent layout

layouts accept children, so you can use them as a chained function like other modifiers. Be wary of accidentally overriding something the layout does for you though.

Example customizations

Let's say you wanted to generate some 2u stabilized keycaps for an Ergodox, you could do something like this:

legends = ["Enter", "Escape", "Tab", "Shift"];
for(y=[0:3]) {
  translate_u(0,y) 2u() dsa_row() stabilized() cherry() legend(legends[y], [0,0, 6]) key();
}

a set of 2 unit keys with legends

The key() function also supports children, and will place them in the center of the top of the keycap, if you want to quickly design your own artisan keycaps:

cherry() key() {
  translate([-6.25,2.3,-0]) scale(0.074) import("Assieme1.stl");
};

an artisan key with no-face on it

(no face courtesy of this thing)

Artisan support also supports subtracting children by doing key(inset=true) { ... }, which is super helpful if you want to make keycaps with legends that are not text. The children will be placed just above the middle of the dish as per usual; you will need to translate them downwards (ex translate([0,0,-1])) to get them to 'dig in' to the top of the key.

Tips and tricks

Looking for information or something specific? you could try checking out the tips and tricks section, or the examples directory.

What if I want to get really technical?

Now we're talkin!

At the base level this project should function well as an intensive key profile design library. by loading up src/key.scad (notice no s) you can tweak variables in src/settings.scad to prototype your own profiles. key.scad There are currently 44 a lot of different settings to tweak in src/settings.scad including width height and depth of the keycap, dish tilt, top skew, fonts, wall thickness, etc. If you want to see the full list of settings, feel free to browse the file itself: settings.scad it has lots of comments to help you get started.

This library should also be abstract enough to handle new dish types, keystems, key layouts, key profiles, and key shapes, in case you want to design your own Typewriter-style keycaps, support buckling spring keyboards or design some kind of triangular dished profile. src/shapes.scad src/stems.scad and src/dishes.scad all have a 'selector' module that should allow you to implement your own creations alongside what already exists in their constituent folders.

If you're interested in this, it may help to read the Technical Design of a keycap wiki page.

Here's an example of tweaking the settings and code to make a 'stop sign' key profile:

In key_shape() in shapes.scad:

 else if ($key_shape_type == "stop_sign") {
   stop_sign_shape(size, delta, progress);
 }

in src/shapes/stop_sign.scad:

module stop_sign_shape(size, delta, progress){
  rotate([0,0,22.5]) circle(d=size[0] - delta[0], $fn=8);
}

In keys.scad:

union() {
  // make the font smaller
  $font_size = 3;
  // top of keycap is the same size as the bottom
  $width_difference = 0;
  $height_difference = 0;
  $key_shape_type="stop_sign";
  $dish_type = "cylindrical";
  // some keycap tops are slid backwards a little, and we don't want that
  $top_skew = 0;

  legends = ["Stop..", "Hammer", "time!"];

  for(x=[0:len(legends)-1]) {
    translate_u(x) cherry() key(legends[x]);
  }
}

three stop-sign shaped keys with legends

Printing Help

Prints from this library are still challenging, despite all efforts to the contrary. Resin printers can create great looking keycaps; FDM printers can create usable keys that look alright, but may require tweaking to get prints acceptable. There are a few quick things that you can do:

  1. If your stem isn't fitting in the switch, try upping the slop factor, accessed by giving your keystem function a numeric value (eg cherry(0.5) key()). This will lengthen the cross and decrease the overall size of the keystem. The default value is 0.3, and represents millimeters. Note that even if you have a resin printer, you should probably keep the default value; keys printed with 0 slop will barely fit on the stem.

  2. If your keystem breaks off the bed mid-print, you can enable a brim by adding the brimmed() modifier. This will give a solid base for the keystem to anchor into.

  3. If you are unsatisfied with the quality of the top surface, you can try printing the keycap on a different surface than the bottom, though it may impact the quality of the stem.

  4. If your newly-designed key shape is crashing into the switch, you can enable a clearance check for cherry switches by adding $clearance_check = true; to your keycap declaration. This will subtract a cherry switch shape from your keycap, highlighting any parts in red which intersect with the switch.

That's it, if you have any questions feel free to open an issue or leave a comment on thingiverse!

TODO:

  • replace linear_extrude_shape_hull with skin_extrude_shape_hull or something, to enable concave extrusions
  • replace current ISO enter shape with one that works for skin()
  • generate dishes via math?

Contributions welcome

My lists of key profiles and layouts are not exhaustive at all, if you want to contribute feel free to make a PR with your changes and we can work together on getting it merged!

About

KeyV2: A Parametric Mechanical Keycap Library

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • OpenSCAD 99.0%
  • Other 1.0%