v1.14

What's Changed

• fixed handling of negative lock level by @tridge in #126
• Option to not use or save BasicID info to parameters by @BluemarkInnovations in #125
• DroneCAN: use TWAI acceptance filters by @tridge in #127
• include multiple encoding errors in OPEN_DRONE_ID_ARM_STATUS message by @BluemarkInnovations in #102
• improve html progress by @tridge in #128
• print received Remote ID messages on serial console for both MAVLink and DroneCAN by @BluemarkInnovations in #100

Full Changelog: release-1.13...v1.14

release-1.13

What's Changed

• added Holybro-RemoteID board by @tridge in #120
• added timeout to secure_command.py and docs by @tridge in #122
• document using GUI tool for secure update by @tridge in #123
• parameter reset to defaults by @BluemarkInnovations in #106
• added CUAV RemoteID board by @tridge in #121

Full Changelog: release-1.12...release-1.13

release-1.12

What's Changed

• Ble legacy transmission rate fix by @BluemarkInnovations in #92
• added JWRID_ESP32S3 board by @tridge in #96
• Provide a pop up if the OTA upgrade fails by @BluemarkInnovations in #91
• updated README by @BluemarkInnovations in #94
• init UAS payload in set_data by @BluemarkInnovations in #104
• Add support for the Bluemark db202mav RemoteID module by @BluemarkInnovations in #107
• Override pre-arm checks by @BluemarkInnovations in #76
• Do not broadcast empty messages by @BluemarkInnovations in #103
• Bugfixes upstream by @dusan19 in #109
• use latest mavlink definitions for MAV_ODID_ARM_STATUS by @BluemarkInnovations in #95
• scripts: added mavlink signing key to secure_command.py by @tridge in #113
• support for BlueMark db210pro module by @BluemarkInnovations in #115
• update all submodules by @tridge in #119
• always update git hash on any build by @tridge in #118
• allow lock_level to set to -1 by @BluemarkInnovations in #111
• fix the bt4 transmition rate computation by @dusan19 in #116
• add support for db203can board by @BluemarkInnovations in #110

New Contributors

• @dusan19 made their first contribution in #109

Full Changelog: release-1.11...release-1.12

release-1.11

What's Changed

• RemoteIDModule: Format update time as h:mm:ss by @muramura in #65
• web interface: add board name, bluemark logo and initial bluemark style by @BluemarkInnovations in #81
• improved firmware update via web interface by @BluemarkInnovations in #80
• only update last received packet timestamp of system/location messages if the timestamp inside the packets are updated by @BluemarkInnovations in #79
• adjust advertisement period based on BT4/5 rate by @BluemarkInnovations in #75
• auto-update BasicID info from GCS by @tridge in #82
• scripts: Bring arduino-cli version up to date by @muramura in #72
• location: Set to UNKNOWN when latitude and longitude are 0 by @muramura in #71
• Altitude: Use Altitude encoding notation by @muramura in #70
• Add support for mRo RemoteID M10049 board by @lgarciaos in #84
• added --bus-num to secure_command.py by @tridge in #85
• WLAN beacon implementation by @BluemarkInnovations in #67
• dual ID implementation by @BluemarkInnovations in #73
• fix: Install pexpect to fix failing regen_headers.sh by @DanLynch-AR in #87
• web: Display two types of BASIC ID messages by @muramura in #66
• fixed bluemark logo by @tridge in #88
• bugfix BLE legacy advertisements broken by @BluemarkInnovations in #74
• fixed display of mRo board ID by @tridge in #89
• fixed web server status web operator location is lost by @tridge in #90

New Contributors

• @muramura made their first contribution in #65
• @lgarciaos made their first contribution in #84
• @DanLynch-AR made their first contribution in #87

Full Changelog: release-1.10...release-1.11

release-1.10

What's Changed

• add BlueMark public key by @BluemarkInnovations in #60
• use the bluemark public key on bluemark boards by @tridge in #61
• fixed handling of CAN bus off state by @tridge in #64
• fixed LED init bug

Full Changelog: release-1.9...release-1.10

release-1.9

What's Changed

• setup efuses on LOCK_LEVEL=2 by @tridge in #55
• implement mavlink parameters by @tridge in #56
• Added Flashing LED Mode and JW Board Placeholder by @sborenstein-ift in #53
• support WS2812 LEDs by @tridge in #57
• added mavlink secure commands by @tridge in #58

New Contributors

• @sborenstein-ift made their first contribution in #53

Full Changelog: release-1.8...release-1.9

release-1.8

What's Changed

• change board name in DroneCAN for DB200 by @tridge in #31
• bluemark info: fix typo in model name + added links for product info and buying by @BluemarkInnovations in #40
• db200: typo, termination resistors are GPIO 10 by @BluemarkInnovations in #37
• disable WiFi NaN transmission by default by @BluemarkInnovations in #36
• enable status LED for BlueMark DB110 module by @BluemarkInnovations in #41
• Trivial typo fixes to README by @bradh in #45
• relicense under GPLv2+ by @tridge in #44
• new partition scheme by @tridge in #43
• added DroneCAN parameter system by @tridge in #46
• new parameters, ID handling, power levels by @tridge in #47
• Set heartbeat autopilot correctly by @friissoren in #42
• improved web interface by @tridge in #48
• added git hash by @tridge in #49
• support SecureCommand for secure update of module parameters remotely by @tridge in #50
• lock param writes when LOCK_LEVEL != 0 by @tridge in #51
• document param settings by @tridge in #52

New Contributors

• @bradh made their first contribution in #45
• @friissoren made their first contribution in #42

Full Changelog: release-1.6...release-1.8

release-1.6

What's Changed

• adjust BT4 send rate based on number of sub frames by @tridge in #27
• fixed pins in docs for S3 dev board by @tridge in #29
• WiFi NAN, bug fix transmit on channel 6, set to random MAC address by @BluemarkInnovations in #28
• make serial ports easier to debug by @tridge in #30

Full Changelog: release-1.5...release-1.6

release-1.5

What's Changed

• added upload commands to the Makefile by @tridge in #19
• support ESP32C3 dev board by @tridge in #22
• BlueMark db200: add LED status and set ESP GPIO pins to enable CAN tr… by @BluemarkInnovations in #23
• added transport abstraction by @tridge in #24
• fix ble transmission protocols by @BluemarkInnovations in #25

New Contributors

• @BluemarkInnovations made their first contribution in #23

Full Changelog: release-1.4...release-1.5

release-1.4

What's Changed

• support building on BlueMark C3 board by @tridge in #16
• added docs on 2 new boards by @tridge in #17

Full Changelog: release-1.3...release-1.4