This is the new, shiny frontend for Cura. daid/Cura is the old legacy Cura that everyone knows and loves/hates.
We re-worked the whole GUI code at Ultimaker, because the old code started to become a unmaintainable.
Use this template to report issues. New issues that do not adhere to this template will take us a lot longer to handle and will therefore have a lower pirority.
For crashes and similar issues, please attach the following information:
- (On Windows) The log as produced by dxdiag (start -> run -> dxdiag -> save output)
- The Cura GUI log file, located at (Windows) $User/AppData/Local/cura/cura.log, (OSX) $User/.cura/cura.log, (Ubuntu) $USER/.local/share/cura
- The Cura Engine log, using Help -> Show Engine Log
- Uranium Cura is built on top of the Uranium framework.
- CuraEngine This will be needed at runtime to perform the actual slicing.
- PySerial Only required for USB printing support.
- Link your CuraEngine backend by inserting the following line in home/.config/cura/config.cfg : [backend] location = /[path_to_the..]/CuraEngine/build/CuraEngine
Please checkout cura-build
There are two ways of doing it. You can either use the generator here or you can use this as a template.
- Change the machine ID to something unique
- Change the machine_name to your printer's name
- If you have a 3D model of your platform you can put it in resources/meshes and put its name under platform
- Set your machine's dimensions with machine_width, machine_depth, and machine_height
- If your printer's origin is in the center of the bed, set machine_center_is_zero to true.
- Set your print head dimensions with the machine_head_shape parameters
- Set the nozzle offset with machine_nozzle_offset_x_1 and machine_nozzle_offset_y1
- Set the start and end gcode in machine_start_gcode and machine_end_gcode
- If your printer has a heated bed, set visible to true under material_bed_temperature
Once you are done, put the profile you have made into resources/settings.