2.0

Release 2.0

This is a major new release. Major changes have been made to bring the sensor PCB up to date with the standard of the rest of the BKB PCBs and rest of the industry. On top of this, tweaks were made to reduce potential user error.

Changelog

• Added VIK connector. Made to work with the newer revision of the splinktegrated (as of writing this release, still in development), and other VIK-compatible hardware. Type-B cable
• Connect the motion pin
• Remove 3v3 LDO and level shifter. No longer needed after switching to RP2040
• Bigger and easier soldering pads, removed the unused pads to save time
• Soldering pads only on one side for the 2.54mm connector and sensor
• Potato

1.9c

• add detrompeur on level shifter
• move components to account for longer pins
• cleanup silkscreen
• make it round

1.8

Made for PCBA only.

• change fonts
• remove pads for non-connected pins
• remove useless reference labels

1.7 PCBA

Made for PCBA only.

WARNING: This release is meant for factory assembly only. If you're going to assemble the components yourself, use the DIY 1.51 release instead !

• Make sensor round again

1.6 PCBA

Made for PCBA only.

• Switch level shifter to qfn format
• Switch to 0603 components

1.51 DIY

Add visual indicator for lens

1.5

Change LDO and resistor

1.43

fix coil whine:

• add r39 resistor
• switch 2v ldo for one that can drive more current

others:

• silkscreen work
• switch 3.3V LDO
• potato

1.41

Silkscreen for component values
1.41.zip

1.31

1.31.zip

• bigger pads for level shifter